What is a laux process iron oxide pigments project report?
A Laux process iron oxide project report is a detailed project report (DPR) for a synthetic iron oxide pigment plant. The plant takes the black iron oxide left when nitrobenzene is reduced with iron and makes red, yellow and black pigments from it. The report sets out the route, machinery, raw materials, approvals, project cost, projections, DSCR and break-even.
Chemical entrepreneurs, aniline and dye intermediate producers with iron sludge, and their lenders use it to judge whether the plant is technically sound and can repay its loan.
Also known as: synthetic iron oxide project report, iron oxide pigment plant DPR, iron oxide from aniline sludge project report, synthetic red and yellow iron oxide project report.
Synthetic iron oxide plant cost and economics
Our sample report models a 9 MT per day plant running 330 days a year, which is 2,970 MT per year at full capacity. Output starts at 60% of capacity and reaches 80% in Year 5, sold at an average ₹78,400 per MT before GST.
The kiln, filters and reactors make this a capital-heavy plant: machinery is about half the project cost. Debt service coverage is lowest in Year 2, at 1.53, when the first full year of loan instalments falls due.
| Land and site development | 76.35 |
|---|---|
| Building and civil works | 212.28 |
| Plant and machinery | 501.01 |
| Other fixed assets | 84.12 |
| Contingencies | 35.66 |
| Preliminary and pre-operative | 22.74 |
| Working capital margin | 53.80 |
| Total | 985.96 |
| Promoter's contribution (25%) | 246.49 |
|---|---|
| Term loan from bank (75%) | 739.47 |
| Cash credit limit (separate) | 161.41 |
| Total project cost | 985.96 |
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.
Iron oxide pigment manufacturing process from Laux sludge
The sample plant buys the black iron oxide sludge left by nitro reduction and refines it into pigment. Red and black come from the sludge; yellow is made on a separate precipitation line.
- Sludge receipt and testing
Each lot is tested for iron content, moisture and residual organics before it is unloaded, because these decide yield and shade.
- Steam stripping and washing
The sludge is repulped and steam stripped to drive off leftover aniline, then washed salt-free in thickeners.
- Sieving and filtration
The slurry is sieved to remove unreacted iron particles and dewatered on a vacuum rotary drum filter.
- Yellow precipitation
Ferrous sulphate solution is air-oxidised with caustic soda and scrap iron in heated reactors to grow yellow goethite of the required shade.
- Drying
Black and yellow cakes are dried gently, since synthetic yellow and black do not withstand heating above about 175°C.
- Calcination to red
Part of the black oxide is calcined in a rotary kiln, where kiln temperature and residence time set the red shade.
- Micronising, testing and packing
Pigment is jet milled, blended to the shade standard, tested for tinting strength, oil absorption and soluble salts, and packed in 25 kg bags.
Laux process or another route: which suits your plant?
Synthetic iron oxide can be made by several routes. The choice depends on the iron source you can secure and the colours your buyers want.
| Full Laux process | Cast iron chips reduce nitrobenzene to aniline; the iron forms black oxide, aluminium chloride steers it to yellow, and kiln calcination gives red. Needs an aniline plant alongside |
|---|---|
| Sludge route (our sample) | Buys iron oxide sludge from nitro reduction at aniline and dye intermediate units, then strips, washes, dries and calcines it. No nitrobenzene handling |
| Penniman-Zoph | Scrap iron is grown into pigment particles by air oxidation in ferrous sulphate solution, held at 70–90°C with steam |
| Precipitation | Ferrous sulphate or pickle liquor is neutralised and air-oxidised; black needs 90–100°C. CSIR-NML has shown pigment-grade oxide from waste pickle liquor |
| Copperas calcination | Ferrous sulphate is dehydrated and roasted above 650°C to red; the sulphur dioxide off-gas must be captured |
Why the sample uses sludge: the integrated Laux process is run at scale by only one producer, in Germany, because it is tied to large-scale aniline production. A new Indian unit usually starts from sludge or ferrous sulphate instead.
Raw materials for synthetic iron oxide
Iron oxide sludge is the largest raw material item in the sample, at 30% of raw material cost including freight. Raw materials together take 51.7% of sales in Year 3, so the sludge contract and caustic soda price drive margins.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Iron oxide sludge from nitro reduction (with transport) | 30% | 252.99 |
| Ferrous sulphate (copperas) | 22% | 185.53 |
| Caustic soda lye | 26% | 219.26 |
| Scrap iron for seeding | 10% | 84.33 |
| Kiln and treatment chemicals | 12% | 101.20 |
| Total | 100% | 843.31 |
Shares and Year 3 costs are from our illustrative sample. Sludge prices vary widely with iron content and distance.
Machinery for an iron oxide pigment plant
The rotary calcination kiln is the largest single machine in the sample. Filtration and precipitation together cost even more, because washing out salts is what makes the pigment saleable.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Repulping and washing tanks | Slurry and wash the incoming sludge | 55.11 |
| Steam stripping column | Removes residual aniline and organics | 45.09 |
| Thickeners and vacuum rotary drum filter | Wash out salts and dewater the cake | 70.14 |
| Air-sparged precipitation reactors | Grow yellow oxide from ferrous sulphate | 70.14 |
| Rotary calcination kiln | Converts black oxide to red shades | 100.21 |
| Spray dryer | Dries black and yellow without colour change | 60.12 |
| Jet mill micronizer and blender | Grinds to fine powder and matches shade | 55.11 |
| Effluent treatment plant | Treats wash water before discharge | 45.09 |
| Total plant and machinery | 501.01 | |
Costs are the sample report's estimates for a 9 MT per day plant. Get current quotations before you finalise.
Licences and approvals for a synthetic iron oxide plant
Pigment manufacture is a Red category activity, and using sludge adds a hazardous waste approval. Plan for both before you order the kiln.
| Pollution board consent | Consent to establish and operate from the State Pollution Control Board; manufacture of pigments (other than blending) is listed in the Red category |
|---|---|
| Hazardous waste authorisation | Under Rule 9 of the Hazardous and Other Wastes Rules 2016, if the sludge is classed as hazardous waste. Where CPCB has no SOP for it, CPCB approval follows a trial run of up to 30 days |
| Product standard | IS 44 sets the specification for iron oxide pigments for paints; it was revised in 2025, replacing the 1991 edition |
| Business registration | Udyam (MSME) registration and GST registration |
| Factory and fire | Factory licence where worker thresholds apply, and fire NOC for the kiln and fuel store; rules vary by state |
Who buys synthetic iron oxide pigments?
Construction and paints are the main outlets. Paver block, tile and ready-mix concrete makers use red, yellow and black oxide to colour concrete, and paint companies use it in primers and decorative paints.
Buyers approve a supplier on shade consistency, tinting strength and low soluble salts, then buy against a shade standard. Synthetic grades are usually finer than 1 micrometre, which gives them more colour strength than ground natural oxide.
- Paver block, tile and precast concrete makers
- Paint and primer manufacturers
- Cement colour and tile adhesive brands
- Plastic masterbatch and rubber compounders
- Pigment traders and exporters
Where a sludge-based unit wins: aniline and dye intermediate clusters produce iron sludge they must otherwise dispose of. A pigment unit close to them gets a cheap iron source, provided its pigment passes the buyer's residue tests.
Mistakes that weaken a Laux process iron oxide project report
- Treating sludge as free
Sludge has freight, testing and variable iron content. Without a written supply agreement, the lender sees the biggest input as unsecured.
- Leaving out the hazardous waste approval
A trial run and its approval can take months. If the timeline ignores it, the first-year sales and the moratorium do not line up.
- One price for every colour
Red, yellow and black sell at different rates, and calcined red costs more to make. Revenue should follow a realistic colour mix.
- No allowance for off-grade lots
Overheated yellow or poorly washed batches fail shade or salt tests and sell cheaply as cement colour. Yield should allow for this.
How NPCS helps you plan an iron oxide pigment plant
- Route and colour mixCompare the sludge, precipitation and calcination routes for your iron source and target buyers.
- Sludge and raw material planWork out sludge quality limits, freight and stock days for a dependable supply.
- Bank-ready project reportProjections, DSCR and working capital in the format your lender wants.
- Approvals and layoutKiln and effluent layout, and the consent and hazardous waste steps for your state.
NPCS's client list shows 269 specialty chemicals assignments, and NPCS has prepared project reports and feasibility studies for chemical plants since 1994.
What's inside the laux process iron oxide pigments sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
19 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Find NPCS project reports in your budget
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Laux Process Iron Oxide Pigments project report: frequently asked questions
What is the Laux process for iron oxide?
The Laux process reduces nitrobenzene to aniline with fine cast iron chips, and the iron ends up as a high-quality black iron oxide. Control chemicals steer the reaction towards black or yellow oxide, and calcining the black in a rotary kiln gives red. It was developed at Bayer in Germany and has been in use there since 1926.
How much does a synthetic iron oxide plant cost?
Our sample report models a 9 MT per day plant at ₹986 lakh, of which ₹501 lakh is plant and machinery. A smaller 3–5 MT per day unit is indicatively ₹4–7 crore, depending on whether you calcine red on site. A full Laux plant that also makes aniline is a far larger chemical project and is priced separately.
Can iron sludge from aniline or dye intermediate plants be used to make pigment?
Yes, if the sludge is stripped of residual aniline and other organics, washed free of salts and tested batch by batch. Bayer used Bechamp reduction sludge to make pigments at Uerdingen in Germany. In India the sludge may be classed as hazardous waste, so using it needs authorisation from the pollution control board under the Hazardous and Other Wastes Rules.
Which colours can a Laux process plant make?
Iron oxides give red, yellow and black, and browns are blends of these. Green and blue are not iron oxides, so the green and blue shades named in older reports are blends with other pigments. Our sample report models red and black from sludge and yellow from a ferrous sulphate precipitation line.
Is an iron oxide pigment plant profitable?
In our illustrative sample, a 9 MT per day plant earns a 20% return on investment in Year 3. It breaks even at 38% of capacity and pays back in about 3.7 years. Real results depend on the cost and iron content of your sludge, kiln fuel, the share of red versus yellow, and how many buyers approve your shades.
How long does approval to use iron sludge take?
Where CPCB has a standard procedure for the waste, the State Pollution Control Board grants authorisation. Where it does not, CPCB permits a trial run of up to 30 days, scheduled with the state board and valid for three months, and decides after reviewing the results. Build these months into your project timeline before the loan moratorium starts.
Is the sample report free and can I use it for a loan?
The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report. Its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and loan scheme.
Sources and references
- IS 44 : 1991 Iron oxide pigments for paints, specificationBureau of Indian Standards, checked Oct 2026
- Standard operating procedure for utilisation of hazardous waste under Rule 9Central Pollution Control Board, checked Oct 2026
- List of Red category industriesPunjab Pollution Control Board, checked Oct 2026
- Production of ferrite and pigment grade iron oxide from waste chloride pickle liquorCSIR-National Metallurgical Laboratory, India Science and Technology portal, checked Oct 2026
