What is a sorbic acid project report?
A sorbic acid project report is a detailed project report (DPR) for a chemical plant that makes food-grade sorbic acid (INS 200) from crotonaldehyde and ketene. It sets out the process, machinery, raw materials, buyers, approvals, project cost, means of finance, five-year projections, DSCR and break-even that a lender or investor reviews.
Promoters use it to size the plant and raise a term loan; banks and investors use it to judge whether the plant can repay.
Also known as: sorbic acid business plan, project report on sorbic acid, sorbic acid plant DPR, sorbic acid feasibility report.
Sorbic acid manufacturing plant cost in India
Our sample report models a 2.1 metric tonnes per day plant, or 693 MT per year over 330 working days. It starts at 60% of capacity, reaches 80% in Year 5 and sells at ₹3,17,000 per MT, ex-GST.
| Land and site development | 58.14 |
|---|---|
| Building and civil works | 240.51 |
| Plant and machinery | 436.81 |
| Other fixed assets | 72.25 |
| Contingencies | 33.87 |
| Preliminary and pre-operative | 21.04 |
| Working capital margin | 50.10 |
| Total | 912.72 |
| Promoter's contribution (25%) | 228.18 |
|---|---|
| Term loan from bank (75%) | 684.54 |
| Cash credit limit (separate) | 150.29 |
| Total project cost | 912.72 |
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. The lowest yearly DSCR in the sample is 1.55. All figures are illustrative.
Sorbic acid manufacturing process
Almost all commercial sorbic acid is made by reacting crotonaldehyde with ketene. The reaction gives a polyester, which is then split with acid and purified to food grade.
- Ketene generation
Glacial acetic acid vapour is cracked in a furnace at about 700°C. Ketene is unstable, so it is made on site and used at once.
- Condensation
Ketene is bubbled into crotonaldehyde in a cooled, glass-lined reactor with a zinc salt catalyst, forming a polyester.
- Depolymerisation
The polyester is heated with hydrochloric acid, which breaks it down into crude sorbic acid.
- Purification
Crude acid is redissolved and treated with activated carbon to strip colour and leftover aldehydes, then filtered.
- Crystallisation and centrifuging
The solution is chilled so sorbic acid crystallises; a centrifuge separates the crystals from the mother liquor.
- Vacuum drying
Crystals are dried at low temperature to under 0.5% moisture, the limit food buyers test for.
- Milling, testing and packing
The dry acid is milled to powder or granules, tested batch by batch and packed in lined bags or fibre drums.
Which process route suits a new sorbic acid plant?
The route decides the capital cost, the hazards you handle and whether you sell sorbic acid, potassium sorbate or both.
| Crotonaldehyde and ketene | The standard industrial route and the one in our sample. Needs a cracking furnace, glass-lined reactors and acid recovery, but gives food-grade purity at scale. |
|---|---|
| Potassium sorbate from bought-in acid | Sorbic acid is neutralised with potassium hydroxide, then dried and granulated. Much lower investment and hazard, but margin depends on the price of purchased acid. |
| Integrated acid and sorbate | Makes sorbic acid and converts part of it into potassium sorbate. Lets you serve both cheese and bakery buyers and beverage and pickle buyers. |
| Biological routes | Fermentation and other bio-based routes are at research stage. A lender will not usually fund them without a proven licensor. |
Raw materials for sorbic acid production
Raw materials take 50.5% of sales in the sample. Crotonaldehyde alone is 66% of that bill and comes from only a few producers, so plants usually sign term contracts and hold about a month of stock.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Crotonaldehyde | 66% | 512.14 |
| Glacial acetic acid | 17% | 131.91 |
| Hydrochloric acid | 6% | 46.56 |
| Zinc salt catalyst | 4% | 31.04 |
| Activated carbon and solvents | 7% | 54.32 |
| Total | 100% | 775.97 |
Crotonaldehyde is flammable and toxic. Storage, transfer and vapour control are part of the plant design, not an afterthought.
Machinery for a sorbic acid plant
The glass-lined condensation reactors are the costliest item in the sample, followed by the ketene furnace. Recovery columns matter as much as reactors, because unrecovered acetic acid and solvent go straight to cost and effluent.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Acetic acid cracking furnace | Makes ketene gas on site | 78.63 |
| Glass-lined condensation reactors | React ketene with crotonaldehyde | 87.36 |
| Depolymerisation and hydrolysis vessels | Split the polyester with acid | 43.68 |
| Crystallisers with chillers | Form pure crystals on cooling | 43.68 |
| Centrifuges | Separate crystals from liquor | 34.95 |
| Vacuum paddle dryer | Dries crystals at low temperature | 39.31 |
| Acetic acid and solvent recovery columns | Recover and recycle liquids | 52.42 |
| Scrubber and effluent treatment plant | Treat vent gas and acidic effluent | 34.94 |
| Milling, sifting and packing line | Size, check and pack the product | 21.84 |
| Total plant and machinery | 436.81 | |
Costs are the sample report's estimates for a 2.1 MT per day plant. Get current quotations before you finalise.
Utilities and manpower for a sorbic acid plant
| Power and fuel | ₹80.86 lakh in Year 3 in the sample, or 5.3% of sales. The cracking furnace is the largest single heat load. |
|---|---|
| Cooling | Chilled water or brine for the condensation reactor, which must be kept cold, and for the crystallisers. |
| Vacuum and steam | Vacuum for the dryer and recovery columns; steam for depolymerisation and distillation. |
| Manpower | 31 people in the sample at ₹70.86 lakh in Year 1, including 11 skilled operators for the furnace, reactors and columns. |
| Quality laboratory | Tests for purity, moisture, sulphated ash, aldehydes, melting range and heavy metals on every batch. |
Licences, approvals and standards for sorbic acid
As of October 2026, these are the approvals and standards that shape a sorbic acid plant. Confirm state rules before you buy land.
| Pollution board consent | Consent to establish and operate from the State Pollution Control Board. Organic chemicals manufacturing is in the Red category, so expect stricter siting and effluent conditions. |
|---|---|
| Environmental clearance | Synthetic organic chemical units are listed under item 5(f) of the EIA Notification 2006. Check with the state authority whether your site and size need prior clearance. |
| Product standard | IS 4818:2025, the BIS standard for food-grade sorbic acid. The BIS draft for this revision sets purity of at least 99%, moisture up to 0.5% and aldehydes up to 0.1%. |
| Food additive specification | FSSAI lists an identity and purity specification for sorbic acid (INS 200). Food companies will ask for test certificates against it. |
| Factory and fire | Factory licence, fire NOC and approval for flammable solvent storage, as your state's rules require. |
| Business registration | Udyam (MSME) registration, where eligible, and GST registration. |
Who buys sorbic acid in India?
Sorbic acid stops moulds and yeasts, so demand follows packaged bakery, cheese, sauces, pickles and soft drinks. Codex allows sorbates in foods from about 200 mg/kg in soda waters to 3,000 mg/kg in cheese, which shows how many product types use it.
Much of the sorbic acid used in India is imported. A domestic plant competes on landed price, shorter lead times and local technical support.
- Bakery, cake and confectionery makers
- Cheese and dairy processors
- Beverage, sauce and pickle makers
- Potassium sorbate producers
- Pharmaceutical, cosmetic and feed formulators
- Food ingredient distributors
Approval comes before volume: large food companies approve a new preservative supplier only after trial lots pass their tests, which can take months. Plan the first year's sales around distributors and smaller processors.
Mistakes that weaken a sorbic acid project report
- Treating every batch as food grade
Batches that miss the purity or aldehyde limit are reworked or sold at a discount. Revenue should allow for it.
- One crotonaldehyde supplier
With few producers, a single source puts the whole plant at risk. Lenders look for a second source or a term contract.
- Optimistic recovery rates
Acetic acid and solvent recovery below the design figure raises cost per MT and effluent load. Test the report at lower recovery.
- Ignoring the Red category
Siting a plant where Red category units are not allowed, or skipping the effluent plant cost, delays consent and the loan.
- Pricing off import offers alone
Import prices move with freight and exchange rates. Use a range, and show what happens to DSCR when the price falls.
How NPCS helps you set up a sorbic acid plant
- Route and product mixDecide between sorbic acid, potassium sorbate or both, and the capacity your market supports.
- Raw material and price studyCrotonaldehyde sourcing, import parity and selling price ranges for your report.
- Bank-ready project reportProjections, DSCR, sensitivity and working capital in your lender's format.
- Approvals and layoutRed category siting, environmental clearance check, plant layout and the approvals list for your state.
NPCS has prepared project reports for entrepreneurs, banks and companies since 1994. Its client list records 269 assignments in specialty chemicals, including one for sorbic acid.
What's inside the sorbic acid sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
19 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS sorbic acid project reports
These are sorbic acid project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Sorbic Acid/Potassium Sorbate Production | Sorbic Acid Powder: 200 MT per annum | Potassium Sorbate Powder: 300 MT per annum | ₹20 crore | 25% | 46% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Sorbic Acid project report: frequently asked questions
What is the cost of a sorbic acid manufacturing plant in India?
A small crotonaldehyde and ketene plant of 2–4 MT per day needs roughly ₹9–15 crore including land, building and working capital margin. Our sample report models a 2.1 MT per day plant at ₹913 lakh. A unit that only converts bought-in sorbic acid into potassium sorbate costs far less. These are indicative figures; a project report works out the cost for your site.
What raw materials are used to make sorbic acid?
Crotonaldehyde and glacial acetic acid are the two main inputs. The acetic acid is cracked into ketene, which reacts with crotonaldehyde. Hydrochloric acid, a zinc salt catalyst, activated carbon and solvents are also used. In our sample report crotonaldehyde makes up 66% of raw material cost, so its price and supply decide most of the plant's margin.
What is the difference between sorbic acid and potassium sorbate?
Potassium sorbate (INS 202) is the potassium salt of sorbic acid (INS 200). It dissolves easily in water, so beverage, syrup and pickle makers often prefer it. Sorbic acid suits fat-based and dry uses such as cheese coatings and bakery fillings. Many plants make sorbic acid first and then neutralise part of it with potassium hydroxide to sell both.
Is sorbic acid manufacturing profitable?
In our illustrative sample, a 2.1 MT per day plant earns a net profit of ₹189 lakh on sales of ₹1,538 lakh in Year 3. Break-even is at about 37% of capacity and the average DSCR is 1.77. Real results depend on crotonaldehyde prices, solvent recovery, the share of output that meets food grade and how fast buyers approve you.
Is sorbic acid natural or synthetic?
Commercial sorbic acid is synthetic. It was first found in the oil of rowan berries. Today it is made chemically, mostly from crotonaldehyde and ketene, because that route gives the purity food makers need at a workable cost. Biological routes are being studied but are not yet used at plant scale in India.
Which licences and standards apply to a sorbic acid plant?
Expect consent to establish and operate from the State Pollution Control Board, which puts organic chemical units in the Red category. Also check environmental clearance under item 5(f) of the EIA Notification. Food-grade product is tested against IS 4818:2025 and the FSSAI specification for INS 200. Factory, fire and solvent storage approvals depend on your state.
Is the sorbic acid project report PDF free, and can I use it for a loan?
The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report. Its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and finance plan.
Sources and references
- IS 4818:2025 Sorbic acid, food grade: Specification (Second Revision)Bureau of Indian Standards, checked Oct 2026
- Draft for comments: Sorbic acid, food grade, Specification (FAD 08)Bureau of Indian Standards, checked Oct 2026
- Chapter 3: Substances added to food (Version 2, 04.11.2024)Food Safety and Standards Authority of India, checked Oct 2026
- Codex General Standard for Food Additives: sorbates (INS 200–203)Food and Agriculture Organization of the United Nations, checked Oct 2026
- Red Category Industries (CPCB classification)Punjab Pollution Control Board, checked Oct 2026
- Letter on Category B synthetic organic chemicals projects, item 5(f) of the EIA Notification 2006Ministry of Environment, Forest and Climate Change, checked Oct 2026
