What is a solar inverter project report?
A solar inverter project report is a detailed project report (DPR) for a unit that assembles and tests the inverters that turn DC power from solar panels into grid-quality AC. It sets out the process, SMT and test machinery, component costs, BIS registration, project cost, five-year projections, DSCR and break-even that a bank needs before funding the unit.
Entrepreneurs, electronics assemblers and solar installers use it to size the unit and apply for a term loan; lenders use it to judge whether the plant can repay.
Also known as: PV inverter, photovoltaic inverter.
What a bank checks in a solar inverter project report
A solar inverter unit is an assembly business: most of the money goes into components and stock, not machines. Lenders look hardest at the figures below, taken from our sample report.
Semiconductors, boards, magnetics and enclosures decide the margin. A report showing a much lower share is usually pricing parts from an old quotation.
Power devices and controllers are largely imported with long lead times. Too little stock in the plan means stalled lines; too much ties up the cash credit limit.
Rooftop installers often pay after their own customer or subsidy pays them. Receivables are the largest current asset in the sample, so they drive the working capital loan.
DSCR (debt service coverage ratio) is cash available for loan instalments divided by the instalments. Banks look for the weakest year, not just the average.
Values are the assumptions and results in our illustrative sample. Your report uses figures for your inverter range, suppliers and buyers.
Solar inverter manufacturing plant cost in India
Cost depends on how much of the inverter you build yourself. An assembler buys finished boards; a full unit runs its own SMT line. The middle tier is the unit modelled in our sample report; the other two are indicative ranges.
Assembly unit
₹50–100 lakh
About 5–10 inverters per day, bought-in boards
- Test bench and burn-in racks₹20–40 lakh
- Assembly benches, ESD and tools₹8–15 lakh
- Working capital margin₹10–25 lakh
PMEGP only if the project stays within ₹50 lakh
SMT and assembly unit
₹327 lakh
22 inverters per day, 6,600 inverters per year
- Plant and machinery₹148 lakh
- Land and building₹103 lakh
- Working capital margin₹34 lakh
Term loan ₹245 lakh (75%), promoter ₹82 lakh
Multi-line plant
₹8–20 crore
About 80–200 inverters per day, single and three-phase
- SMT lines and inspection₹3–8 crore
- Test, burn-in and reliability lab₹1–3 crore
- Working capital margin₹1–3 crore
MSME or corporate term loan
Assembly unit and multi-line ranges are indicative and exclude land. Costs vary with inverter rating, automation and machine make.
Solar inverter plant economics in our sample report
The sample models a unit making 3–5 kW single-phase string inverters, running 300 days a year. It starts at 60% of capacity and reaches 80% in Year 5, selling at ₹18,000 per inverter ex-factory.
| Land and site development | 19.26 |
|---|---|
| Building and civil works | 84.08 |
| Plant and machinery | 147.82 |
| Other fixed assets | 22.82 |
| Contingencies | 11.60 |
| Preliminary and pre-operative | 7.14 |
| Working capital margin | 34.32 |
| Total | 327.04 |
| Promoter's contribution (25%) | 81.76 |
|---|---|
| Term loan from bank (75%) | 245.28 |
| Cash credit limit (separate) | 102.95 |
| Total project cost | 327.04 |
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.
Solar inverter manufacturing process
Inverter making is electronics assembly followed by heavy testing. Every unit is run at load before it ships, because a field failure costs far more than the test.
- Incoming inspection
IGBTs, MOSFETs, electrolytic capacitors and bare PCBs are sample-tested against the datasheet and stored in a dry, ESD-safe store.
- SMT assembly of the control board
A stencil printer lays solder paste, pick-and-place puts down the microcontroller and small parts, and a reflow oven solders them.
- Power board assembly
Through-hole parts such as DC-link capacitors, inductors and power devices are inserted and wave soldered.
- Board test and conformal coating
Boards are checked on test fixtures, then coated so rooftop heat, dust and humidity do not cause leakage or corrosion.
- Final assembly
Boards, heat sink with thermal paste, magnetics, DC isolator and display go into the enclosure; power device screws are torqued to specification.
- Firmware and calibration
MPPT (maximum power point tracking) and grid synchronisation firmware is loaded, and voltage and current sensing is calibrated.
- Burn-in and final test
Each inverter runs at load on a PV simulator and is checked for conversion efficiency, anti-islanding trip and insulation before packing.
Components and raw materials for solar inverters
Power semiconductors are the largest single cost in the sample. Most are imported and priced in dollars, so a weaker rupee raises cost even when list prices stay flat. Units usually qualify two sources for each critical part.
| Component group | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Power semiconductors (IGBTs and MOSFETs) | 24% | 115.39 |
| Inductors, transformers and capacitors | 22% | 105.77 |
| Bare PCBs, microcontrollers and ICs | 20% | 96.16 |
| Aluminium heat sinks and enclosures | 18% | 86.54 |
| Connectors, cables and protection devices | 12% | 57.70 |
| Displays, sensors and communication modules | 4% | 19.23 |
| Total | 100% | 480.79 |
Machinery and test equipment for a solar inverter unit
The SMT line is the costliest single item, but test and burn-in equipment together take more than 40% of the machinery budget in the sample. That is normal for inverters, where testing is what a buyer pays for.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Benchtop SMT line (stencil printer, pick-and-place, reflow oven) | Builds the control board | 44.35 |
| Wave soldering machine | Solders through-hole power parts | 14.78 |
| Inductor and transformer winding machines | Winds boost and filter magnetics in-house | 11.83 |
| ESD-safe workstations and torque tools | Final assembly without static damage | 14.78 |
| Board test fixtures and oscilloscopes | Find board faults before assembly | 14.78 |
| Burn-in and load test racks | Run each inverter at load for hours | 20.69 |
| PV and grid simulator test bench | Checks MPPT, efficiency and anti-islanding | 26.61 |
| Total plant and machinery | 147.82 | |
Costs are the sample report's estimates for a 22 inverter per day unit. Get current quotations before you finalise.
Market for solar inverters in India
Rooftop solar drives demand for small string inverters. In August 2026 the Ministry of New and Renewable Energy reported that more than 50 lakh households had installed rooftop systems under PM Surya Ghar, with 14.8 GW commissioned. Each grid-connected home system needs an inverter, and each inverter will need service or replacement during the life of the panels.
Installers choose on price, efficiency, warranty and how fast a fault is attended. Large brands dominate, but many sell inverters assembled by smaller makers under contract.
- Rooftop solar installers and EPC contractors
- Solar product distributors and dealers
- Inverter and UPS brands buying on contract
- Solar pump and off-grid system integrators
- Telecom tower and institutional buyers
Where a new unit wins: service. An installer who gets a replacement board within days from a nearby maker will often accept a smaller brand over an import that waits weeks for parts.
BIS registration and licences for solar inverter manufacturing
BIS registration is the step that most often delays a first sale. Plan for lab testing of every model before production starts, and budget the time in the project schedule.
| BIS registration | Compulsory for SPV inverters under the Solar Systems, Devices and Components Goods Order, 2025; each model is registered after testing at a BIS-recognised lab |
|---|---|
| Safety and efficiency standards | IS 16221 (Part 2):2015 for safety and IS/IEC 61683 for efficiency |
| Grid-connected models | Also IS 16169:2019 (anti-islanding) and IS 17980:2022 (MPPT efficiency) |
| Above 200 kW | Self-certification allowed until 31 December 2026 under S.O. 3706(E); smaller string inverters need full registration |
| Business registration | Udyam (MSME) registration and GST registration |
| Pollution board consent | Dry electronic assembly is in the White category in some states, such as Odisha, and needs no consent there; confirm with your State Pollution Control Board |
| Factory licence | Under the Factories Act where worker and power thresholds apply; rules vary by state |
Mistakes that weaken a solar inverter project report
- Using installer or MRP prices as ex-factory price
Installers buy well below the price their customer pays. Revenue built on retail prices overstates profit and DSCR.
- No time or money for BIS testing
Lab testing of each model can take months. A report that shows sales from the first month after commissioning is not credible.
- Leaving out warranty cost
Inverters carry multi-year warranties. A provision for field replacements, spares and service visits belongs in the cost sheet.
- Pricing imported parts at a fixed exchange rate
Semiconductors and controllers are bought in dollars. The report should test what a weaker rupee does to margin.
- Under-sizing the test bench
Without a PV simulator and enough burn-in positions, testing becomes the bottleneck and output stays below plan.
How NPCS helps you set up a solar inverter unit
- Product range and capacityChoose ratings, on-grid, off-grid or hybrid models, and daily output to suit your buyers and budget.
- Make or buy decisionCompare an in-house SMT line with bought-in boards on cost, quality control and loan size.
- Bank-ready project reportProjections, DSCR and working capital in the format your lender wants, with component prices tested for exchange rate risk.
- BIS and approvals planA list of the standards, tests and approvals for your models and state, built into the project schedule.
NPCS's client list includes 48 assignments in electronics and appliance assembly, including 1 for solar inverters. The NPCS project team, led by founder Ajay Kumar Gupta, has also worked on solar cell and battery projects.
What's inside the solar inverter sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
19 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS solar inverter project reports
These are solar inverter project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Solar Inverter (100 KVA – 1000 KVA) | Solar Inverter 50 Hz 100 to 1000 KVA 15 NosPer Day | ₹12.88 crore | 26% | 47% | Get this report |
| Solar Panel Assembling & Solar Power Inverter on Grid, Off Grid WithSolar Pump Controller | Poly Crystaline Solar PV Modules Cap10 Watt: 1,200,000 Nos/Annum Poly Crystaline Solar PV Module Cap. 20 Watt: 600,000 Nos/Annum Poly Crysta… | ₹16.74 crore | 26% | 56% | Get this report |
| Solar Panel Assembling & Solar Power Inverter On Grid, Off Grid with Solar Pump Controller | Poly Crystaline Solar PV Modules (10, 20, 50,100 & 300 Watt): 74,00,000 Nos per annum Solar Inverters (Grid Tie String Inverters 1, 10, 30, … | ₹219.18 crore | 36% | 31% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Solar Inverter project report: frequently asked questions
How much does it cost to set up a solar inverter manufacturing plant in India?
A small assembly unit that buys finished boards needs roughly ₹50–100 lakh, while a 15–30 inverter per day unit with its own SMT line costs about ₹2.5–4 crore. Our sample report models a 22 inverter per day unit at ₹327 lakh. These are indicative figures; your report works out the cost for your inverter range, capacity and location.
Is solar inverter manufacturing profitable?
In our illustrative sample, a 22 inverter per day unit earns a 26% return on investment in Year 3. It breaks even at 39% of capacity and pays back in about 3.2 years. Real profit depends on the price you get from installers, component prices in rupees, warranty claims and how quickly each new model clears BIS registration.
Is BIS certification mandatory for solar inverters in India?
Yes. SPV inverters are covered by the Solar Systems, Devices and Components Goods Order, 2025, which requires BIS registration against IS 16221 (Part 2) and related standards. As of October 2026, only inverters above 200 kW may use self-certification, until 31 December 2026. Each model and rating you sell needs its own registration.
Can I get a PMEGP loan for a solar inverter unit?
Only for a small unit. PMEGP covers manufacturing projects up to ₹50 lakh, with a margin-money subsidy of 15–35% depending on category and location. A unit with its own SMT line and test bench usually costs more, so it is financed through an MSME term loan, often with CGTMSE guarantee cover. Confirm current limits with your bank.
Can I start by assembling solar inverters instead of making the boards?
Yes, and many small makers do. You buy tested control and power boards from an electronics contract manufacturer and do final assembly, firmware loading and testing in-house. It cuts machinery cost, but you still need a test bench, and the BIS registration is in your name, so your test records must hold up.
Is a solar inverter project report the same as an engineering college project?
No. Most solar inverter project reports found online are student projects that explain circuit design. A business project report covers the factory: capacity, machinery, components, manpower, licences, project cost, loan, profit and DSCR. Banks and subsidy offices need the business report, not the circuit design.
Is the sample report free and can I use it for a loan?
The sample is free to view and download as a PDF. It is an illustrative report that shows the format and depth of an NPCS report; its figures are representative and not from a real project, so do not submit it to a bank. For a loan, NPCS prepares a report for your own capacity, location and loan scheme.
Sources and references
- S.O. 3706(E): extension of the Solar Systems, Devices and Components Goods Order, 2025 for SPV inverters above 200 kWMinistry of New and Renewable Energy, Gazette of India, checked Oct 2026
- Prime Minister's Employment Generation Programme (PMEGP)State Bank of India, checked Oct 2026
- Prime Minister's Employment Generation Programme (PMEGP) guideDistrict Industries Centre, Ganjam, Government of Odisha, checked Oct 2026
- PM Surya Ghar scheme crosses 50 lakh rooftop solar installationsDD India (Prasar Bharati), reporting MNRE figures, checked Oct 2026
- List of White category industriesState Pollution Control Board, Odisha, checked Oct 2026
