What is a sodium nitrite project report?
A sodium nitrite project report is a detailed project report (DPR) for a plant that burns ammonia to nitrogen oxides and absorbs them in soda ash solution. The plant makes sodium nitrite, with sodium nitrate as a co-product. The report sets out the process, machinery, raw materials, market, project cost, finance, five-year projections, DSCR and break-even.
Chemical entrepreneurs and dye or pharma companies use it to size a plant and raise a term loan; banks use it to judge whether the plant can repay.
Also known as: sodium nitrite manufacturing plant project report, sodium nitrite and sodium nitrate project report, sodium nitrite DPR, sodium nitrite business plan.
Sodium nitrite plant cost and economics
The sample report models a 14 MT per day sodium nitrite plant working 330 days a year, or 4,620 MT per year at full capacity. It starts at 60% utilisation, reaches 80% in Year 5 and sells at ₹76,700 per MT before GST.
| Land and site development | 97.98 |
|---|---|
| Building and civil works | 262.14 |
| Plant and machinery | 720.96 |
| Other fixed assets | 111.68 |
| Contingencies | 49.16 |
| Preliminary and pre-operative | 31.05 |
| Working capital margin | 82.60 |
| Total | 1,355.57 |
| Promoter's contribution (25%) | 338.89 |
|---|---|
| Term loan from bank (75%) | 1,016.68 |
| Cash credit limit (separate) | 247.78 |
| Total project cost | 1,355.57 |
Plant and machinery is more than half of the project cost, which is typical of a gas-phase chemical plant. The lowest DSCR in the sample is 1.28. A lender will look closely at Year 1 and Year 2, when the plant runs at only 60–65% of capacity.
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.
Sodium nitrite manufacturing process
Sodium nitrite is made commercially by absorbing nitrogen oxides (NOx) in an alkaline solution. In the route modelled here, the NOx comes from burning ammonia, and soda ash is the alkali.
- Ammonia oxidation
Vaporised liquid ammonia is mixed with filtered air and passed over platinum-rhodium gauze at about 850–900 °C, where it burns to nitric oxide.
- Gas cooling
A waste heat boiler and gas cooler take the heat out, and part of the nitric oxide oxidises to nitrogen dioxide on the way to the absorbers.
- Absorption in soda ash
The gas flows up stainless steel towers against a falling soda ash solution. Equal parts of NO and NO2 give nitrite; extra NO2 gives nitrate, so the gas ratio is controlled.
- Evaporation and crystallisation
The nitrite liquor is concentrated in an evaporator and cooled under vacuum, so sodium nitrite crystallises while most of the nitrate stays in solution.
- Centrifuging and drying
A centrifuge separates and washes the crystals, and a fluid bed dryer brings moisture down to the grade the buyer asks for.
- Nitrate recovery
The mother liquor is treated with nitric acid, which turns the leftover nitrite into sodium nitrate; the nitric oxide released goes back to the absorbers.
- Packing
Sodium nitrite is packed in lined HDPE bags with grade, end use and batch marked, and stored away from acids, ammonium salts and fuels.
Which route suits your sodium nitrite plant?
The old name for this project, sodium nitrate and sodium nitrite from nitric acid vapour of oxalic acid, describes a recovery plant. The choice of NOx source decides capacity, cost and how much nitrate you make.
| Ammonia oxidation (stand-alone) | Burns bought liquid ammonia to make NOx on demand. Output is set by you, not by another plant. This is the route in our sample report. |
|---|---|
| Off-gas recovery | Absorbs NOx released by an oxalic acid unit (which oxidises sugar or molasses with nitric acid) or a nitration plant. Saves the ammonia burner, but output follows the host plant. |
| Soda ash or caustic soda | Soda ash is cheaper per tonne of sodium and is the usual choice. Caustic soda gives a cleaner liquor with no carbon dioxide given off, but costs more. |
| Nitrite to nitrate split | Set by the NO to NO2 ratio entering the towers and by how much mother liquor you send to nitrate recovery. Plan the split from what your buyers will take. |
| Grades | IS 879 covers a technical grade and an analytical reagent grade. Pharma and food buyers set their own tighter limits. |
Raw materials for sodium nitrite
In theory, each tonne of sodium nitrite needs about 0.77 tonne of soda ash and 0.25 tonne of ammonia. Real use is higher because of conversion and absorption losses. In the sample, raw materials take 52.8% of sales and soda ash is the biggest item.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Soda ash (light) | 55% | 720.21 |
| Liquid ammonia | 37% | 484.50 |
| Platinum-rhodium gauze loss | 4% | 52.38 |
| Nitric acid for nitrate inversion | 4% | 52.38 |
| Total | 100% | 1,309.47 |
Platinum lost from the gauze during oxidation is costed as a raw material. Spent gauze is usually returned to the refiner for metal credit.
Machinery for a sodium nitrite plant
The absorption towers are the largest single machinery item in the sample. Everything that touches wet NOx or acid liquor is built in stainless steel.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Ammonia vaporiser and filtration skid | Turns liquid ammonia to clean gas | 50.47 |
| Air blower and air filtration system | Supplies dust-free process air | 64.88 |
| Ammonia oxidation converter with waste heat boiler | Burns ammonia over gauze and raises steam | 144.19 |
| Stainless steel NOx absorption towers with circulation pumps | Absorb NOx in soda ash solution | 158.61 |
| Evaporator and vacuum crystalliser | Concentrate liquor and grow crystals | 115.35 |
| Centrifuges | Separate and wash crystals | 50.47 |
| Fluid bed dryer | Dries crystals to grade moisture | 50.47 |
| Tail gas scrubber | Cleans leftover NOx before venting | 50.47 |
| Bagging and stitching machine | Weighs and seals bags | 36.05 |
| Total plant and machinery | 720.96 | |
Costs are the sample report's estimates for a 14 MT per day plant. Get current quotations before you finalise.
Utilities and manpower for a sodium nitrite plant
Power and fuel cost ₹181.52 lakh in Year 3 of the sample, or 7.3% of sales. The waste heat boiler on the converter supplies part of the steam the evaporator needs, which keeps fuel cost down. The plant runs round the clock, so staffing covers three shifts.
| Category | People | Year 1 cost (₹ lakh) |
|---|---|---|
| Management, supervision and administration | 12 | 46.80 |
| Skilled workers and operators | 27 | 66.42 |
| Semi-skilled and unskilled workers | 39 | 63.18 |
| Total | 78 | 176.40 |
Licences and standards for a sodium nitrite plant
| Business registration | Udyam (MSME) registration and GST registration |
|---|---|
| Pollution board consent | Consent to establish and operate from the State Pollution Control Board. CPCB's Red list includes basic chemicals and acid manufacture, so expect Red category scrutiny of NOx emissions and liquor discharge |
| Ammonia storage | PESO licence to store compressed gas in pressure vessels under the SMPV Rules, for liquid ammonia bullets |
| Product standard | IS 879:1981 for sodium nitrite: technical grade at least 97.0% NaNO2, moisture up to 2.0% and sodium nitrate up to 0.4%. BIS has a product manual for certification under this standard |
| Factory licence | Under the Factories Act, plus a fire NOC; rules on hazardous processes vary by state |
Categories and rules differ by state. Confirm with the State Pollution Control Board and PESO circle office before you fix the site.
Who buys sodium nitrite and sodium nitrate?
Most sodium nitrite goes into diazotisation, the step that turns aromatic amines into azo dyes, pigments and many drug and pesticide intermediates. That puts the main buyers in the chemical belts of Gujarat and Maharashtra. A few large integrated producers and imports set the price, so a new plant wins on steady quality and dependable delivery rather than on price alone.
- Dye, pigment and dye intermediate makers
- Pharmaceutical and agrochemical companies
- Rubber chemical and blowing agent producers
- Heat treatment salt and metal finishing units
- Glass and explosives makers, for sodium nitrate
- Chemical traders and exporters
Quality sells the product: dye and pharma buyers test every lot for assay, moisture, chloride and free-flow. A plant that holds these limits lot after lot gets onto approved-supplier lists, and those buyers rarely switch.
Mistakes that weaken a sodium nitrite project report
- Treating nitrate as free extra revenue
Sodium nitrate has its own buyers and price. A report that assumes it all sells at full price overstates sales.
- Leaving out gauze losses
Platinum-rhodium gauze loses metal in use and must be replaced. Without this cost, the cost per tonne looks too low.
- Undersizing the tail gas scrubber
Brown NOx fumes at the stack are the first thing an inspector sees. A weak scrubber can hold up consent to operate.
- Using analytical reagent prices for sales
Most output is technical grade sold in bulk. Pricing it at small-pack reagent rates inflates revenue and DSCR.
- Ignoring import competition
Imported material caps the domestic price. Test the projections at a lower selling price and at 60% utilisation.
How NPCS helps you plan a sodium nitrite plant
- Route and capacityCompare ammonia oxidation with off-gas recovery and size the plant to your buyers.
- Product splitSet the nitrite to nitrate mix and grades from current demand and prices.
- Bank-ready project reportProjections, DSCR and working capital in the format your lender wants.
- Approvals and layoutPlant layout, ammonia storage, scrubber sizing and the approvals list for your state.
NPCS, led by founder Ajay Kumar Gupta, has prepared project reports for chemical plants since 1994, including 269 specialty chemical assignments on its client list.
What's inside the sodium nitrite sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
19 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS sodium nitrite project reports
These are sodium nitrite project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Sodium Nitrate And Sodium Nitrite From Nitric Acid Vapor Of Oxalic Acid | 4 MT/Day | ₹1.6 crore | 41% | 68% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Sodium Nitrite project report: frequently asked questions
What is the cost of a sodium nitrite manufacturing plant in India?
Our sample report models a 14 MT per day plant at ₹1,355.57 lakh, with ₹720.96 lakh in plant and machinery. As an indicative guide, a 5–8 MT per day plant may need about ₹6–10 crore and a 25–30 MT per day plant about ₹20–30 crore. Location, land, steam supply and the degree of automation move these figures a lot.
How is sodium nitrite manufactured?
Ammonia is burnt with air over platinum-rhodium gauze to form nitric oxide. The gas is cooled and absorbed in soda ash solution, which gives a liquor of sodium nitrite with some sodium nitrate. The liquor is evaporated, crystallised under vacuum, centrifuged and dried, and the dry crystals are packed in lined HDPE bags.
How are sodium nitrite and sodium nitrate made in the same plant?
Absorption always forms some nitrate along with nitrite. After the nitrite crystals are removed, the nitrate-rich mother liquor is treated with nitric acid, which converts the remaining nitrite to nitrate. The nitric oxide given off returns to the absorbers, and sodium nitrate is crystallised and sold as a co-product to glass, explosives and heat transfer salt buyers.
Can NOx from an oxalic acid plant be used to make sodium nitrite?
Yes. Oxalic acid made by nitric acid oxidation releases nitrogen oxides, and absorbing them in soda ash recovers sodium nitrite and nitrate instead of venting them. It suits a plant that already runs the oxalic acid process. Output then depends on the host plant, so the project report must size the absorption section to its off-gas flow.
Is sodium nitrite manufacturing profitable?
In our illustrative sample, the 14 MT per day plant earns a 14.8% return on investment in Year 3. It breaks even at 46% of capacity and pays back in about 4.4 years. Margins are thin because soda ash and ammonia take 52.8% of sales, so profit depends on raw material buying, gauze life and the price of the nitrate co-product.
Which licences are needed for a sodium nitrite plant?
You need Udyam and GST registration, consent to establish and operate from the State Pollution Control Board, and a factory licence. Storing liquid ammonia in pressure vessels needs a PESO licence under the SMPV Rules. IS 879 sets the quality grades buyers refer to. Confirm the pollution category and any state rules before you buy land.
Is the sample report free and can I use it for a loan?
The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report; its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and loan scheme.
Sources and references
- IS 879:1981 Specification for sodium nitrite (first revision)Bureau of Indian Standards (copy published by Public.Resource.Org), checked Oct 2026
- Product manual under IS 879: CMD-2 circularBureau of Indian Standards, checked Oct 2026
- Frequently asked questions on SMPV RulesPetroleum and Explosives Safety Organisation (PESO), checked Oct 2026
- Categorisation of industrial sectors under Red as per CPCB criteriaState Pollution Control Board, Odisha, checked Oct 2026
