What is a smartphone tempered glass screen protector project report?
A smartphone tempered glass screen protector project report is a detailed project report (DPR) for a unit that cuts thin cover glass, strengthens it in a potassium salt bath, coats and laminates it into phone-specific protectors. It sets out the process, machinery, raw materials, BIS requirements, project cost, projections, DSCR and break-even.
Entrepreneurs, accessory brands and importers planning local production use it to size the plant and raise a term loan; lenders use it to test whether the unit can repay.
Also known as: screen guard, mobile tempered glass, mobile screen protector.
Smartphone tempered glass screen protector plant cost in India
Our sample report models a unit making 36,000 pieces per day for 330 days a year, which is 1,18,80,000 pieces at full capacity. It starts at 60% utilisation and reaches 80% in Year 5, selling at ₹27 per piece ex-factory, before GST.
Plant and machinery is just over half the project cost, because a tempering unit needs furnaces, CNC cutters, edge polishers and a vacuum coater before it sells a single piece.
| Land and site development | 107.99 |
|---|---|
| Building and civil works | 293.52 |
| Plant and machinery | 646.65 |
| Other fixed assets | 52.44 |
| Contingencies | 47.01 |
| Preliminary and pre-operative | 28.69 |
| Working capital margin | 77.94 |
| Total | 1,254.24 |
| Promoter's contribution (25%) | 313.56 |
|---|---|
| Term loan from bank (75%) | 940.68 |
| Cash credit limit (separate) | 233.80 |
| Total project cost | 1,254.24 |
Term loan at 10.5% with a 6-month moratorium and 72 monthly instalments; DSCR (debt service coverage ratio, cash available per rupee of loan instalment) is lowest at 1.88 in Year 2. All figures are illustrative.
Smartphone tempered glass screen protector manufacturing process
The glass is shaped first and strengthened afterwards, because chemically tempered glass cannot be cut again without losing its strength. The sequence below is the one modelled in our sample report.
- Cutting
Thin aluminosilicate sheets are scribed and CNC cut to the outline of each phone model, including camera and speaker openings.
- Edge shaping and polishing
Edges are ground to a rounded 2.5D profile and polished, since a rough edge is where most protectors start to crack.
- Ultrasonic cleaning
A two-stage ultrasonic wash removes glass dust and grinding coolant, which would otherwise leave marks after tempering.
- Chemical tempering
Racks of pieces soak for several hours in molten potassium nitrate, where larger potassium ions replace sodium ions and lock the surface in compression.
- Coating and printing
An oil-repellent anti-fingerprint layer is applied, and full-cover models get a printed black border that hides the adhesive edge.
- Lamination
Silicone adhesive and a PET release film are laminated to the back so the protector bonds to the phone without bubbles.
- Inspection and packing
Each piece is checked for clarity, bubbles and edge chips, then boxed with alcohol and dry wipes and dust stickers.
Which tempered glass business model are you planning?
Searches for a "tempered glass making machine" mix up three very different businesses. Decide which one you are building before you price machinery, because the project cost and BIS position differ for each.
| Shop film-cutting plotter | Cuts hydrogel or plastic film to a phone outline at the counter. It makes no glass, so it is a retail service rather than a factory project. |
|---|---|
| Finishing and packing unit | Buys tempered, shaped glass and adds lamination, inspection and packing. Capital need is low, but glass quality and test results depend on the supplier. |
| Integrated tempering unit (our sample) | Cuts, edges, tempers, coats and laminates in-house. The sample unit makes 36,000 pieces per day for ₹1,254 lakh and controls the quality BIS will test. |
| Large automated plant | The Optiemus and Corning facility at Noida opened in August 2025 with an initial ₹70 crore for 25 million units a year, according to PIB. |
| Why not heat toughening | Phone protector glass is well under 1 mm thick. Thermal toughening used for building glass does not work at this thickness, so the ion-exchange salt bath is the standard route. |
Raw materials for tempered glass screen protectors
Cover glass sheets are 55% of raw material cost in our sample, and raw materials as a whole take 38.4% of sales. The tempering salt is a running cost too, because potassium nitrate is consumed and the bath must be topped up and replaced as sodium builds up in it.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Aluminosilicate cover glass sheets | 55% | 474.61 |
| Silicone adhesive | 14% | 120.81 |
| PET protective and release films | 12% | 103.55 |
| Potassium nitrate tempering salt | 7% | 60.40 |
| Anti-fingerprint coating material | 6% | 51.78 |
| Screen printing ink and cleaning chemicals | 6% | 51.77 |
| Total | 100% | 862.92 |
Packing (boxes, wipes and dust stickers) is costed separately at 4.7% of sales in the sample.
Machinery for a tempered glass screen protector plant
Chemical tempering furnaces are the largest machinery item in our sample, followed by the CNC cutting machines that set how many phone models you can serve.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| CNC glass cutting and engraving machines | Cut sheets to each phone outline | 116.40 |
| Edge grinding and 2.5D polishing machines | Round and polish the edges | 103.46 |
| Ultrasonic cleaning lines | Remove dust and coolant | 64.67 |
| Chemical tempering furnaces | Hold the molten salt bath | 129.33 |
| Vacuum anti-fingerprint coating system | Applies the oil-repellent layer | 77.60 |
| Screen printing and curing line | Prints borders on full-cover models | 38.80 |
| Adhesive lamination and film cutting machines | Apply adhesive and release film | 64.66 |
| Inspection and surface stress testing equipment | Checks optics and tempering depth | 51.73 |
| Total plant and machinery | 646.65 | |
Costs are the sample report's estimates for a 36,000 pieces per day line. Get current quotations before you finalise.
Manpower and power for a screen protector unit
Glass handling, inspection and packing are labour-heavy, so the sample unit employs 91 people. Power and fuel are the next big running cost at 14.6% of sales, much of it for the tempering furnaces, which hold the salt bath molten around the clock.
| Category | Number | Monthly wage (₹) | Annual cost (₹ lakh) |
|---|---|---|---|
| Management, supervision and administration | 14 | 29,000 | 48.72 |
| Skilled workers and operators | 32 | 18,500 | 71.04 |
| Semi-skilled and unskilled workers | 45 | 12,000 | 64.80 |
| Total | 91 | 184.56 |
Inspection and lamination rooms need dust control, because a single particle under the adhesive shows up as a bubble on the phone.
BIS certification and licences for mobile tempered glass
The biggest regulatory change for this product is compulsory BIS registration from April 2027. Build it into your project timeline and budget.
| BIS registration | Compulsory for screen protectors for smartphones from 1 April 2027, under the Electronics and IT Goods Compulsory Registration Order (notification S.O. 5190(E), 21 September 2026) |
|---|---|
| Product standard | IS 19348:2025, Glass Screen Protector: Specification, from the BIS glass and glassware committee (CHD 10) |
| What the draft tested | The 2024 BIS draft set thickness up to 0.70 mm, light transmission above 90%, surface compression of at least 500 MPa and a four-point bend test; confirm the final values in the published standard |
| Business registration | Udyam (MSME) registration and GST registration |
| Pollution board consent | Consent to establish and operate from the State Pollution Control Board, covering spent salt, grinding sludge and wash water |
| Factory and fire | Factory licence where worker thresholds apply, and a fire NOC for furnaces holding molten salt |
Market for tempered glass screen protectors in India
Domestic demand is above 500 million pieces a year, with a retail value of about ₹20,000 crore, according to the PIB release on the Noida facility in August 2025. Most of it has been met by imports. Buyers fit a protector with a new phone and replace it after a crack or an upgrade, so demand repeats.
The sale is model-driven. A unit that releases cuts within days of a phone launch wins shelf space, while stock of old models loses value fast.
- Mobile accessory distributors and wholesalers
- Mobile phone retail shops and kiosks
- Online marketplace sellers
- Accessory brands buying private-label stock
- Phone brands and authorised service centres
Why timing matters: from 1 April 2027 imported and local protectors both need BIS registration. A local unit that is registered early can supply brands and distributors who lose uncertified sources.
Mistakes that weaken a tempered glass project report
- Using shop prices for sales
Kiosks sell protectors at several times the ex-factory rate. A report built on retail prices overstates revenue and DSCR; our sample uses ₹27 per piece.
- No allowance for breakage
Thin glass breaks in cutting, edging and the salt bath. Raw material use must cover rejected pieces, not just good output.
- Leaving out BIS testing time and cost
Registration under IS 19348 needs test reports from a recognised lab. Sales projections that start before registration are not credible to a lender.
- Ignoring model churn in stock
Finished goods for older phones become hard to sell. Keep finished stock lean and budget for new CNC programmes and printing screens each season.
- Pricing a film plotter as a glass plant
A low-cost film cutter is not a tempering line. Machinery quotations must match the route you have chosen.
How NPCS helps you set up a tempered glass screen protector plant
- Route and capacityChoose between a finishing unit and a full tempering line, and size it to your market.
- Machinery and glass sourcingCompare tempering furnaces, CNC and coating lines and cover glass suppliers.
- Bank-ready project reportProjections, DSCR, breakage and working capital in the format your lender wants.
- BIS and approvals planPlant layout, power load and a timeline for IS 19348 registration and state approvals.
NPCS's client list includes 31 assignments in the ceramics and glass sector, among them a detailed project report on toughened glass in 2025. The work is carried out by the NPCS project team, led by founder Ajay Kumar Gupta.
What's inside the smartphone tempered glass screen protector sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
18 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Find NPCS project reports in your budget
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Smartphone Tempered Glass Screen Protector project report: frequently asked questions
What is the smartphone tempered glass screen protector manufacturing plant cost in India?
Our sample report models a 36,000 pieces per day unit with its own cutting, edging, chemical tempering, coating and lamination at ₹1,254 lakh, including ₹647 lakh of plant and machinery. A unit that only laminates and packs bought-in tempered glass costs far less. Your own figure depends on capacity, the number of tempering furnaces and whether you coat in-house.
Which machines are needed to make mobile tempered glass?
A full unit needs CNC glass cutting machines, edge grinding and 2.5D polishing machines, ultrasonic cleaning lines, chemical tempering furnaces, an anti-fingerprint coating system, a screen printing and curing line for full-cover models, lamination and film cutting machines, and surface stress testing equipment. In our sample the tempering furnaces are the largest machinery item.
Can I start with a ₹2–3 lakh tempered glass machine?
The low-cost machines sold to mobile shops are mostly cutting plotters that trim hydrogel or plastic film to a phone outline. They do not make or temper glass. They suit a retail counter, not a factory. A glass screen protector unit needs tempering furnaces, edge finishing and testing equipment, which is why plant cost runs into crores.
Is BIS certification mandatory for mobile tempered glass?
Yes, from 1 April 2027. A notification of 21 September 2026 (S.O. 5190(E)) added screen protectors for smartphones to the Electronics and IT Goods Compulsory Registration Order, with IS 19348:2025 as the standard. Makers and importers must hold BIS registration before selling in India. Plan testing and registration well before your first commercial batch.
Is smartphone tempered glass manufacturing profitable?
In our illustrative sample, a 36,000 pieces per day unit earns a 19% return on investment in Year 3, breaks even at 43% of capacity and pays back in about 3.8 years. Real profit depends on glass sheet prices, breakage in cutting and tempering, power cost and how fast you launch cuts for new phone models.
Tempered glass ka business kaise shuru kare?
First choose your route: packing bought-in glass, or a full unit that cuts and tempers its own glass. Then fix capacity and the phone models you will cover, get machinery quotations, and prepare a project report for the bank. Register the unit, apply for pollution consent, and plan BIS registration under IS 19348 before selling.
Is the sample report free and can I use it for a loan?
The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report; its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and loan scheme.
Sources and references
- IS 19348:2025 Glass Screen Protector: Specification (standard details)Bureau of Indian Standards, checked Oct 2026
- Draft Indian Standard: Chemically Tempered Glass Screen Protector, Doc. CHD 10 (26905)Bureau of Indian Standards, checked Oct 2026
- Inauguration of India's first tempered glass manufacturing facility for mobile devices, Noida (PIB release, 30 August 2025)Press Information Bureau, Government of India, checked Oct 2026
