What is a iron oxide project report?
An iron oxide project report is a detailed project report (DPR) for a plant that turns ferrous sulphate and steel scrap into synthetic yellow, red and black iron oxide pigments. It sets out the process route, machinery, raw materials, effluent plan, project cost, means of finance, five-year projections, DSCR and break-even that a lender or investor reviews.
Chemical entrepreneurs, paver block and paint companies adding backward integration, and their banks use it to size the plant and judge whether it can repay a term loan.
Also known as: project report on iron oxide, iron oxide business plan, synthetic iron oxide pigment DPR, red oxide plant project report.
Iron oxide manufacturing plant cost in India
Our sample report models a synthetic iron oxide plant of 15 metric tonnes per day (MT per day). Running 330 days a year, it can make 4,950 MT a year at full capacity. It starts at 60% of capacity, reaches 80% in Year 5 and sells at an average ₹78,000 per MT, ex-GST.
Plant and machinery is the largest cost, at more than half the project. The reactors, dryer, kiln and effluent plant are what make a pigment unit more capital-heavy than a simple grinding unit.
| Land and site development | 79.62 |
|---|---|
| Building and civil works | 271.23 |
| Plant and machinery | 756.14 |
| Other fixed assets | 79.70 |
| Contingencies | 51.37 |
| Preliminary and pre-operative | 30.95 |
| Working capital margin | 88.90 |
| Total | 1,357.91 |
| Promoter's contribution (25%) | 339.48 |
|---|---|
| Term loan from bank (75%) | 1,018.43 |
| Cash credit limit (separate) | 266.69 |
| Total project cost | 1,357.91 |
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. Minimum DSCR (debt service coverage ratio, cash available to repay the loan divided by the instalments due) is 1.67. All figures are illustrative.
Iron oxide manufacturing process
The sample plant uses the precipitation route. It makes yellow iron oxide first, then calcines part of it to red, so one line can sell both colours.
- Dissolving and purifying
Ferrous sulphate crystals are dissolved in water, then settled and filtered so that insoluble dirt and heavy metal traces do not dull the shade.
- Seed formation
Part of the solution is reacted with caustic soda and air to form fine goethite seed, the crystals that fix final particle size and colour.
- Pigment growth
The seed is grown in heated reactors with steel scrap and air bubbling through the liquor; the scrap dissolves and keeps feeding iron to the growing crystals.
- Filtration and washing
Filter presses separate the pigment and wash out sodium sulphate until water-soluble salts fall below the grade limit.
- Drying
A spin flash dryer turns the washed cake into free-flowing yellow iron oxide powder in seconds, without overheating it.
- Calcination
Yellow oxide fed to a rotary kiln loses its combined water and becomes red hematite; kiln temperature and residence time set the red shade.
- Micronising and blending
The powder is micronised so it disperses easily in paint or concrete, then lots are blended to match the standard shade.
- Testing and packing
Each lot is tested for shade, tinting strength and sieve residue, then packed in 25 kg laminated bags.
Which process route suits your iron oxide plant?
Iron oxide can be made by several routes, and the choice decides the plant cost, the effluent load and which grades you can sell.
| Precipitation (alkali) | Ferrous sulphate reacted with caustic soda and air gives yellow; calcining the yellow gives red. Good shade control, but every tonne leaves sodium sulphate liquor to treat. |
|---|---|
| Penniman type | Seed grows in a ferrous salt solution with steel scrap and air, typically at about 70–95°C. The scrap regenerates the iron salt, so less alkali is used, but growth is slow. |
| Copperas calcination | Dried ferrous sulphate is roasted directly to red. The plant is simpler, but the off-gas carries sulphur oxides that need a scrubber. |
| Laux process | Iron oxide is made as a by-product of aniline production. It needs a large chemical complex and is not a route for a standalone unit. |
| Natural oxide grinding | Hematite ore or ochre is crushed, ground and classified. Low cost, but shades are duller and purity varies with the ore. |
| Pickle liquor route | CSIR-National Metallurgical Laboratory has demonstrated a low-temperature route from waste chloride pickle liquor for pigment and ferrite grades. |
Black grades need a separate reaction: black iron oxide is magnetite, made under different precipitation conditions. If buyers want yellow, red and black from one supplier, plan reactor capacity and dryer time for all three.
Raw materials for iron oxide pigment
Ferrous sulphate is the biggest item, at 42% of raw material cost in the sample. Much of it is a by-product of steel pickling and titanium dioxide plants, so its iron content and free acid vary from one source to the next.
Raw materials take 50.7% of sales in Year 3, which is why the report must test a rise in ferrous sulphate and caustic soda prices.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Ferrous sulphate (copperas) | 42% | 575.69 |
| Caustic soda lye | 26% | 356.38 |
| Steel scrap | 20% | 274.14 |
| Lime for neutralisation | 7% | 95.95 |
| Process additives | 5% | 68.54 |
| Total | 100% | 1,370.70 |
Machinery for an iron oxide plant
The pigment growth reactors are the largest machinery item. Reactors, filter presses and tanks in contact with acidic liquor need lined or stainless construction.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Dissolving and settling tanks | Make and clean the ferrous sulphate solution | 68.05 |
| Seed precipitation reactors | Form the goethite seed | 83.18 |
| Growth reactors with air blowers | Grow the pigment to size and shade | 136.10 |
| Filter presses and washing | Separate pigment and remove salts | 90.74 |
| Spin flash dryer | Dries the wet cake to powder | 105.86 |
| Rotary calcination kiln | Converts yellow to red | 105.86 |
| Micronizer and blender | Fine grinding and shade matching | 75.61 |
| Effluent treatment plant | Neutralises and settles process water | 60.49 |
| Bag filling and packing | Packs 25 kg bags | 30.25 |
| Total plant and machinery | 756.14 | |
Costs are the sample report's estimates for a 15 MT per day plant. Get current quotations before you finalise.
Manpower and utilities for an iron oxide plant
The plant runs reactors, dryer and kiln round the clock, so it needs shift operators and a laboratory that checks every lot. Power and fuel cost ₹152.81 lakh in Year 3 of the sample, or 5.7% of sales.
Water use is high because filter cake is washed until soluble salts are low, and most of that water then passes through the effluent plant.
| Staff category | Number | Monthly wage (₹) | Year 1 (₹ lakh) |
|---|---|---|---|
| Management, supervision and administration | 11 | 32,500 | 42.90 |
| Skilled workers and operators | 26 | 20,500 | 63.96 |
| Semi-skilled and unskilled workers | 38 | 13,500 | 61.56 |
| Total | 75 | 168.42 |
Licences and approvals for an iron oxide plant
Pigment manufacturing sits in the strictest pollution category, so approvals take longer than for most chemical units. Start them while the project report is being prepared.
| Pollution category | Red category: "Manufacturing of paints, varnishes, pigments and intermediate (excluding blending/mixing)". Consent to establish is needed before construction and consent to operate before production. |
|---|---|
| Hazardous waste | Schedule I of the Hazardous and Other Wastes Rules, 2016 lists pigment production, covering process sludge, chemical sludge from wastewater treatment and dust from air filters. Authorisation comes from the State Pollution Control Board. |
| Product standard | IS 44:2025, Iron oxide pigments for paints, which replaced the 1991 edition. Paint buyers use it as the quality reference. |
| GST | HSN heading 2821, iron oxides and hydroxides; 18% GST as of October 2026. |
| Business registration | Udyam (MSME) registration and GST registration |
| Factory and fire | Factory licence or registration under the applicable labour law, and a fire NOC covering the kiln, fuel storage and caustic soda handling; rules vary by state |
Market for iron oxide pigments in India
Construction is the largest outlet. Paver block, tile, roof tile and ready-mix concrete makers use iron oxide because it stays stable in alkaline cement and does not fade outdoors. Paint companies buy red oxide for primers and yellow and red for tinting.
India is a large producer of natural oxide: the USGS Mineral Commodity Summaries 2026 puts Indian ochre output at an estimated 3.4 million tonnes in 2025. Synthetic grades serve buyers who need brighter, repeatable colour.
- Paver block, tile and precast concrete makers
- Paint and primer manufacturers
- Rubber, plastics and linoleum processors
- Ferrite and foundry users
- Pigment traders and distributors
- Export buyers
Approval is the real sales cycle: a paint or paver buyer tests your shade against its standard for weeks before the first order. Once approved, buyers seldom switch, so budget for sample lots and slow early sales.
Mistakes that weaken an iron oxide project report
- Pricing every grade like red oxide
Yellow, black and micronised grades sell at different rates. One average price hides how the grade mix moves revenue.
- Treating effluent as an afterthought
Precipitation leaves sodium sulphate liquor with every tonne of pigment. An undersized effluent plant can stop consent to operate.
- Assuming steady ferrous sulphate quality
By-product copperas varies in iron content and free acid. Without a test plan and a backup supplier, yields and shade drift.
- Under-costing kiln and dryer fuel
The sample takes power and fuel at 5.7% of sales. A plant that calcines most of its output should test a higher figure.
- No allowance for off-shade lots
Some batches miss the shade. They must be reblended or sold as a lower grade, and the report should allow for that loss.
How NPCS helps you set up an iron oxide plant
- Route and grade mixCompare precipitation, Penniman type and calcination routes for the colours your buyers want.
- Plant sizing and suppliersSize reactors, dryer and kiln, and collect quotations from equipment makers.
- Bank-ready project reportProjections, DSCR, sensitivity to raw material prices and working capital in your lender's format.
- Effluent and approvals planEffluent plant sizing, hazardous waste handling and the red category approvals list for your state.
NPCS's client list records 269 assignments in specialty chemicals, including iron oxide, prepared by the NPCS project team led by founder Ajay Kumar Gupta.
What's inside the iron oxide sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
19 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS iron oxide project reports
These are iron oxide project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Synthetic Red & Yellow Iron Oxide and Other Oxides of Iron | 5 Ton/Day | ₹1.74 crore | 44.7% | 60.6% | Get this report |
| Synthetic Iron Oxide | 5.00 MT/day | ₹2.86 crore | 45% | 40% | Get this report |
| Synthetic Red Iron Oxide | 1500Mt/annum | ₹2.92 crore | 28% | 62% | Get this report |
| Synthetic Iron Oxide (Red, Yellow and other Oxides of Iron) | 5 MT/ Day | ₹4 crore | 42% | 42% | Get this report |
| Mining of Mineral Ore with Processing and Beneficiation for Production of Red Iron Oxide | Iron Ore: 2,400 MT / Day | ₹17.98 crore | 30% | 61% | Get this report |
| Red Iron Oxide (With Mining of Mineral Ore Along with Processing and Beneficiation) | Red Iron Oxide: 4,000 MT / Day | ₹43.91 crore | 31% | 50% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Iron Oxide project report: frequently asked questions
What is the cost of an iron oxide manufacturing plant in India?
Our sample report models a 15 MT per day synthetic iron oxide plant at ₹1,358 lakh, including ₹756 lakh of plant and machinery and ₹89 lakh of working capital margin. A smaller 4–6 MT per day unit that only calcines and grinds bought-in material may need an indicative ₹4–7 crore. Your own report works out the cost for your route, capacity and site.
What raw materials are used to make iron oxide pigment?
Ferrous sulphate, also called copperas, is the main raw material for synthetic iron oxide. Caustic soda, steel scrap and air are used to precipitate and grow the pigment, and lime treats the effluent. In our sample report ferrous sulphate makes up 42% of raw material cost, caustic soda lye 26% and steel scrap 20%.
How is red iron oxide made from yellow iron oxide?
Yellow iron oxide is goethite, an iron oxide that holds combined water. When it is heated in a rotary kiln it loses that water and turns into hematite, which is red. Higher temperature and longer time give darker, bluer reds, so kiln control decides the shade. The red is then micronised and blended to match the standard.
Is iron oxide manufacturing profitable?
In our illustrative sample, a 15 MT per day plant reaches a 23% return on investment in Year 3. It breaks even at about 39% of capacity and pays back in about 3.4 years. Real results depend on your ferrous sulphate cost, kiln fuel, effluent cost, the grade mix you sell and whether paint and paver buyers approve your shades.
What is the difference between natural and synthetic iron oxide?
Natural iron oxide is mined ore, such as ochre or hematite, that is ground and classified. It is cheap but its shade and purity vary. Synthetic iron oxide is made by chemical precipitation or calcination, so it is purer, brighter and more consistent. Paint and paver block makers who need repeatable colour mostly buy synthetic grades.
What is the HSN code and GST rate for iron oxide?
Iron oxides and hydroxides fall under HSN heading 2821. As of October 2026 they are covered by the general entry for inorganic chemicals of heading 28 in Schedule II of the GST rate notification, which carries 18% GST. Check the current CBIC rate notification before you price contracts, as entries can change.
Red oxide ka business kaise shuru kare?
Start by choosing the route and grades: calcined red only, or a full precipitation plant making yellow, red and black. Then fix a site where the State Pollution Control Board will grant red category consent, secure a ferrous sulphate supply and get a project report for the bank. Shade samples to buyers should go out before the plant is complete.
Is the sample report free and can I use it for a loan?
The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report; its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own route, capacity, location and lender.
Sources and references
- IS 44:1991 Iron oxide pigments for paints, standard detailsBureau of Indian Standards, checked Oct 2026
- IS 44:2025 Iron Oxide Pigments for Paints, SpecificationNSAI Standards (listing of the BIS standard), checked Oct 2026
- Notification No. 9/2025-Integrated Tax (Rate)Central Board of Indirect Taxes and Customs, checked Oct 2026
- List of red category industriesState Pollution Control Board, Odisha, checked Oct 2026
- Hazardous and Other Wastes Rules, 2016: Schedule IPunjab Pollution Control Board, checked Oct 2026
- Mineral Commodity Summaries 2026: Iron oxide pigmentsU.S. Geological Survey, checked Oct 2026
- Pigment-grade iron oxide from waste chloride pickle liquorCSIR-National Metallurgical Laboratory, India Science and Technology portal, checked Oct 2026
