What is a hpmc capsules project report?
An HPMC capsules project report is a detailed project report (DPR) for a plant that makes empty two-piece vegetarian capsules from hydroxypropyl methylcellulose. It covers the dipping process, machinery, raw materials, drug licensing, market, project cost, means of finance, five-year projections, DSCR and break-even that a bank or investor reviews before funding.
Promoters use it to size the plant and raise a term loan; lenders and investors use it to judge whether the unit can repay while it waits for buyer approvals.
Also known as: veg capsules project report, vegetarian capsule manufacturing plant report, empty HPMC capsules business plan, cellulose capsule plant DPR.
HPMC capsule manufacturing plant cost in India
The sample report models a plant making 18,00,000 capsules per day over 330 working days, which is 59,40,00,000 capsules a year at full capacity. It starts at 60% utilisation, reaches 80% in Year 5 and sells at ₹0.38 per capsule, ex-factory and before GST.
| Land and site development | 129.24 |
|---|---|
| Building and civil works | 200.03 |
| Plant and machinery | 559.23 |
| Other fixed assets | 58.16 |
| Contingencies | 37.96 |
| Preliminary and pre-operative | 24.62 |
| Working capital margin | 49.67 |
| Total | 1,058.91 |
| Promoter's contribution (25%) | 264.73 |
|---|---|
| Term loan from bank (75%) | 794.18 |
| Cash credit limit (separate) | 149.00 |
| Total project cost | 1,058.91 |
DSCR (debt service coverage ratio) is the cash a unit earns for every rupee of loan instalment due. In the sample it never falls below 2.00, and the Year 3 break-even sits at 30.9% of capacity. Plant and machinery is just over half the project cost, so the number of dipping lines you buy decides most of the budget.
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.
Veg capsules manufacturing process, step by step
Empty HPMC capsules are made by dip moulding: steel pins are coated with a cellulose solution, dried, and the film is pulled off as a cap or a body. Caps and bodies are formed on separate pin bars of slightly different diameter, then joined.
- Solution preparation
HPMC is dispersed in hot purified water and cooled until it dissolves. The gelling agent, gelling aid and colours are blended in, and the batch is de-aerated under vacuum so no bubbles reach the pins.
- Dipping
Lubricated stainless steel pins dip into the warm solution; solution viscosity and temperature set the wall thickness, which buyers check as capsule weight.
- Gelation and drying
The coated pins travel through drying kilns where conditioned air at controlled temperature and humidity sets the film into a firm shell.
- Stripping and trimming
Jaws strip the dried caps and bodies off the pins, and rotating knives trim each one to exact length before the pins are re-lubricated.
- Joining
Each cap is pushed onto its body to the pre-lock position, so the capsule stays closed in transit but opens cleanly on the buyer's filling machine.
- Sorting and inspection
Capsules pass through sorting and camera or visual inspection that removes dents, holes, short bodies, double caps and colour faults.
- Printing and packing
Printing is done only on order; capsules are then packed in double polyethylene bags inside cartons in a humidity-controlled room.
HPMC vs gelatin capsules: what changes in the plant
HPMC does not gel when it cools the way gelatin does, so the plant has to set the film another way. Most producers add a gelling agent with a salt; some use thermogelation, where heated pins set the HPMC film by heat alone.
| Point | Hard gelatin capsules | HPMC capsules |
|---|---|---|
| Shell material | Gelatin from animal bone or hide | Cellulose derivative of plant origin |
| Water held in the shell | About 13–16% | About 3–8% |
| How the film sets | Cools and gels on cold pins | Gelling agent and salt, or heat on warm pins (thermogelation) |
| Main buyers | Pharma formulators filling standard drugs | Nutraceutical, herbal and probiotic brands; pharma for moisture-sensitive drugs |
| Selling point | Lower price, long track record on filling lines | Vegetarian claim, low moisture, no animal-origin risk |
Choose the route before the machine: the gelling-agent route and the thermogelation route need different pin heating and solution handling. Fix the route first, then ask suppliers for output and reject rates proven on that route.
Moisture ranges are typical published values for each shell type, not test results from a specific plant.
Raw materials for HPMC capsules
Capsule-grade HPMC drives the raw material bill. Buy it against a certificate of analysis with viscosity and substitution limits, because a viscosity drift between lots changes wall thickness and capsule weight. In the sample, raw materials are 35.1% of sales.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Hydroxypropyl methylcellulose (capsule grade) | 76% | 421.52 |
| Gelling agent (carrageenan or gellan gum) | 6% | 33.28 |
| Gelling aid (potassium chloride) | 1% | 5.55 |
| Colours and opacifier | 9% | 49.92 |
| Pin lubricant | 3% | 16.64 |
| Edible printing ink | 5% | 27.73 |
| Total | 100% | 554.64 |
Machinery for a veg capsule plant
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Automatic hard capsule dipping and forming machine | Dips, dries, strips, trims and joins caps and bodies | 268.43 |
| Solution preparation tanks and feeding system | Dissolves HPMC and feeds the dip pans | 44.74 |
| HVAC and dehumidification for drying kilns | Supplies conditioned air that sets the film | 78.29 |
| Sorting and visual inspection machine | Removes defective capsules | 33.55 |
| Capsule printing machine | Prints brand marks on order | 27.96 |
| Purified water generation system | Makes process water for the solution | 27.96 |
| Spare pin bars and moulds | Size changeovers and replacement pins | 39.15 |
| Quality control laboratory equipment | Tests weight, dimensions, moisture and disintegration | 39.15 |
| Total plant and machinery | 559.23 | |
One machine sets the budget: the dipping and forming machine is ₹268.43 lakh, about 48% of plant and machinery in the sample. The HVAC system is the next largest item at ₹78.29 lakh.
Costs are the sample report's estimates. Get current quotations, with HPMC output per hour stated in writing, before you finalise.
Utilities and manpower for an HPMC capsule plant
The drying kilns and the packing room both need conditioned air around the clock, so power and air handling get as much attention in the report as the main machine.
| Power and fuel | ₹107.11 lakh in Year 3 in the sample, about 6.8% of sales; HVAC, dehumidifiers and kiln heaters are the main loads, with a DG set for back-up |
|---|---|
| Conditioned air | Temperature and humidity held steady in the kilns and the packing room, since humid air softens stored capsules and dry air makes them brittle |
| Water | Purified water for the solution and for cleaning dip pans and tanks |
| Manpower | 50 people in the sample: 8 in management and supervision, 17 skilled operators and 25 semi-skilled and unskilled workers, with a Year 1 wage bill of ₹113.52 lakh |
| Working days | 330 days a year; dipping lines run continuously because restarting a line wastes solution and time |
Licences and approvals for an HPMC capsule unit
Empty capsules for medicines are regulated as drug components, so plan the licence and GMP layout before the building is designed, not after.
| Drug manufacturing licence | From the State Drugs Control authority. Section 3(b) of the Drugs and Cosmetics Act, 1940 includes substances meant as components of a drug, naming empty gelatin capsules |
|---|---|
| Good Manufacturing Practices | Premises, equipment and documentation under Schedule M of the Drugs Rules, 1945, notified afresh by G.S.R. 922(E) of 28 December 2023 |
| Pollution board consent | Consent to establish and operate from the State Pollution Control Board |
| Business and factory registration | Udyam and GST registration, a factory licence where thresholds apply, and a fire safety NOC |
| Buyer certifications | Halal, kosher or vegan certificates where export or nutraceutical buyers ask for them |
Requirements differ by state. Confirm the licence form and inspection steps with your state drug controller.
Market for vegetarian capsules in India
Demand comes mainly from nutraceutical, herbal and Ayurvedic brands that want a plant-based shell they can call vegetarian on the label. Pharma companies buy HPMC capsules for powders that pick up moisture or react with gelatin, and for probiotics.
Orders vary widely in size, colour and printing. A plant that can change pin bars and colours quickly can take the small trial orders that lead to regular business.
- Nutraceutical and dietary supplement brands
- Ayurvedic and herbal medicine makers
- Pharmaceutical formulation units
- Contract capsule filling units
- Distributors of empty capsules
- Export buyers of vegetarian capsules
Approval comes before volume: buyers run trial lots on their own filling machines before placing regular orders. Plan the first year around sample lots to contract fillers and supplement brands, with pharma approvals following.
Mistakes that weaken an HPMC capsules project report
- Using gelatin line speeds for HPMC
HPMC can run slower than gelatin on the same machine frame, so output copied from a gelatin quotation overstates sales.
- No allowance for trimming waste and rejects
Trim ends, start-up losses and inspection rejects all consume HPMC; the raw material cost per saleable capsule must include them.
- Under-sizing HVAC and dehumidification
Monsoon humidity slows drying and softens stock. A report that prices a small air system will miss both power cost and output.
- Ignoring the approval period
Buyers test trial lots before ordering, so sales start slowly. Working capital and the moratorium should cover this ramp-up.
- One price for every size
Size 00 shells use more HPMC than size 3 shells and sell at a higher price; revenue should follow the planned size mix.
How NPCS helps you plan an HPMC capsule plant
- Route and capacityChoose between gelling-agent and thermogelation routes, and size the lines to your target buyers.
- Machinery and HVACCompare dipping machine and air-handling quotations on proven HPMC output.
- Bank-ready project reportProjections, DSCR, break-even and working capital that allow for the buyer approval period.
- Licensing and GMP layoutPlant layout and the approvals list for a drug manufacturing licence in your state.
NPCS's client list shows 269 assignments in specialty chemicals. The NPCS project team, led by founder Ajay Kumar Gupta, has prepared project reports and feasibility studies since 1994.
What's inside the hpmc capsules sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
19 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Find NPCS project reports in your budget
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
HPMC Capsules project report: frequently asked questions
What is the cost of an HPMC capsule manufacturing plant in India?
Our sample report models a plant making 18,00,000 capsules per day at a total project cost of ₹1,058.91 lakh, of which plant and machinery is ₹559.23 lakh. Cost rises or falls mainly with the number of dipping lines, the make of the machine and the size of the conditioned building. Your own report prices these for your capacity and location.
What is the difference between HPMC and gelatin capsules?
Gelatin capsules are made from animal collagen, while HPMC capsules are made from a cellulose derivative of plant origin. HPMC shells hold far less moisture, so they suit hygroscopic powders, probiotics and herbal extracts, and they appeal to vegetarian and vegan buyers. Gelatin shells cost less and run faster on most filling machines, which is why many drug makers still use them.
What raw material is used to make veg capsules?
The shell is mainly capsule-grade hydroxypropyl methylcellulose (HPMC) dissolved in purified water. A small amount of gelling agent such as carrageenan or gellan gum, with a gelling aid such as potassium chloride, helps the film set on the pins. Colours, an opacifier and pin lubricant make up the rest. In our sample, HPMC is 76% of raw material cost.
Do I need a drug licence to make empty HPMC capsules?
For capsules sold to medicine makers, plan for one. The Drugs and Cosmetics Act counts substances meant as components of a drug, naming empty gelatin capsules, within its definition of a drug. That brings a manufacturing licence from the State Drugs Control authority and Good Manufacturing Practices under Schedule M. Confirm the exact licence form with your state drug controller before you apply.
Are HPMC capsules vegetarian and halal?
HPMC capsules contain no animal material, so they suit vegetarian and vegan products. Halal and kosher status, however, is a certificate the plant earns for its materials and process, not something the shell carries by default. Export buyers and nutraceutical brands often ask for these certificates, so budget for the audits if you plan to sell to them.
Can a gelatin capsule machine make HPMC capsules?
Sometimes, with changes, but plan for it rather than assume it. HPMC solution behaves differently from gelatin: it is set with a gelling agent or by heat, it needs tighter control of solution and drying temperatures, and it runs slower. Ask the machine supplier for proven HPMC output and reject rates on the exact model before you build a report on a converted line.
Is the sample report free and can I use it for a loan?
The sample is free to view and download. It shows the format and depth of an NPCS report. Its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and lender.
Sources and references
- The Drugs and Cosmetics Act, 1940 (section 3(b), definition of drug)Uttar Pradesh Police, Government of Uttar Pradesh, checked Oct 2026
- Gazette notifications: Schedule M of the Drugs Rules, 1945 (G.S.R. 922(E), 28 December 2023) and its extension noticesCentral Drugs Standard Control Organisation, Ministry of Health and Family Welfare, checked Oct 2026
