WhatsApp us
Request a Quote

Project reports in Medical Devices

Hemodialysis Blood Tubing Manufacturing Project Report

Plant cost, clean room machinery, Class B licensing and five-year projections for a blood tubing set unit, with a free sample project report PDF you can open now.

Also known as: haemodialysis blood tubing, blood line set, dialysis blood tubing set, AV blood tubing set

Plant capacity
3,900 sets per day
Total project cost
₹796 lakh
Plant and machinery
₹365 lakh
Return on investment
14% (Year 3)
Break-even
45% of capacity
Payback period
About 4.5 years

Figures from our illustrative sample report for a typical unit. They show the format of an NPCS report and are not quotes for your project.

What is a hemodialysis blood tubing project report?

A hemodialysis blood tubing project report is a detailed project report (DPR) for a unit that extrudes medical grade PVC tubing, moulds drip chambers and connectors, and assembles sterile arterial and venous blood lines. It sets out the process, clean room, machinery, licensing, project cost, five-year projections, DSCR and break-even a lender needs.

Entrepreneurs and existing disposables makers use it to plan the plant and raise a term loan; banks use it to judge whether the unit can repay.

Also known as: haemodialysis blood tubing, blood line set, dialysis blood tubing set, AV blood tubing set.

What a bank checks in a hemodialysis blood tubing project report

A blood tubing set sells for little more than it costs to make, so lenders look hard at price, material cost and cash flow. These are the values in our sample report and why each one matters.

₹140 per setEx-factory price, before GST

Against a cost of about ₹121 per set, the margin is narrow. Banks compare the price with recent tender rates, not with the MRP printed on the pack.

45.8%Raw material share of sales

Medical grade PVC compound is 45% of material cost. A rise in compound price should be tested, because it moves profit more than any other input.

1.26Lowest DSCR, in Year 2

DSCR is the cash available for the loan divided by the instalments due. It dips when full repayment starts after the moratorium; the sample averages 1.43.

60 daysCredit to buyers

Hospitals, tender buyers and distributors pay slowly. Receivables are the largest part of working capital in the sample, which needs a ₹175 lakh cash credit limit.

Values are the assumptions in our illustrative sample. Your report uses figures for your capacity, buyers and suppliers.

Hemodialysis blood tubing manufacturing plant cost in India

The sample report models a plant making 3,900 sets per day over 300 working days, or 11,70,000 sets a year at full capacity. It starts at 60% of capacity and reaches 80% in Year 5, selling at ₹140 per set and employing 43 people.

₹796 lakhTotal project cost
₹1,147 lakhSales in Year 3
₹115 lakhNet profit in Year 3
1.43Average DSCR
Cost of project (₹ lakh)
Land and site development52.90
Building and civil works225.99
Plant and machinery365.32
Other fixed assets45.45
Contingencies29.57
Preliminary and pre-operative17.98
Working capital margin58.39
Total795.60
Means of finance (₹ lakh)
Promoter's contribution (25%)198.90
Term loan from bank (75%)596.70
Cash credit limit (separate)175.17
Total project cost795.60

Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative. A unit that buys tubing and uses a contract steriliser can start at an indicative ₹1.5–3 crore.

Hemodialysis blood tubing manufacturing process

A blood tubing set has two lines: the arterial line carries blood from the patient to the dialyser, and the venous line brings it back. Both are made, assembled and sterilised in seven stages.

  1. Tubing extrusion

    Medical grade PVC compound is extruded into main line, pump segment and small-bore tubing, with a laser gauge holding the bore and wall within tolerance.

  2. Moulding

    Drip chambers, dialyser connectors and luer locks are injection moulded from medical grade polymers in dedicated moulds.

  3. Clean room assembly

    In an ISO Class 8 clean room, operators join tubes, chambers, injection ports and transducer protectors by solvent bonding.

  4. Leak testing

    Every line is pressure tested for leaks and checked for free flow; a weak bond here becomes a blood leak on the machine.

  5. Packing

    Sets are coiled and sealed in medical grade pouches, each labelled with lot number and expiry date.

  6. ETO sterilisation

    Packed sets are sterilised with ethylene oxide, then held in an aeration room until gas residues fall within limits.

  7. Batch release

    Samples from each batch are tested for sterility, pyrogens and ETO residue before the batch is dispatched.

Raw materials for blood tubing sets

Medical grade PVC compound is the main input. It must stay flexible, kink-resistant and clear enough to see blood and air, so units buy it from compounders who supply biocompatibility data with each grade.

Raw materialShare of costYear 3 (₹ lakh)
Medical grade PVC compound for tubing45%236.21
PP, ABS and polycarbonate granules for moulded parts18%94.48
Transducer protectors15%78.73
Bought-out clamps, injection ports and caps12%62.99
Ethylene oxide gas7%36.74
Bonding solvent3%15.75
Total100%524.90

Packing pouches and cartons are costed separately in the sample, at 6.3% of sales.

Machinery for a blood tubing set unit

The extrusion line is the largest single item in the sample. The clean room and ETO steriliser together cost more than the moulding machines and moulds, which is why this plant needs more capital than most plastic disposables.

MachineWhat it doesSample cost (₹ lakh)
Medical tubing extrusion line with laser diameter gaugeMakes main line and pump segment tubing80.37
Clean room with HVAC, ISO Class 8Controlled area for assembly65.76
Injection moulding machinesMould chambers and connectors54.80
ETO steriliser with aeration roomSterilises packed sets and clears gas residue51.14
Moulds for drip chambers and connectorsOne mould per part design43.84
Assembly and solvent bonding stationsJoin tubes and parts into lines25.57
Quality control laboratory equipmentLeak, strength, sterility and residue tests25.57
Pouch sealing and packing machineSeals sets in sterile barrier pouches18.27
Total plant and machinery365.32

Costs are the sample report's estimates. Get current quotations before you finalise.

Who buys hemodialysis blood tubing sets?

Every hemodialysis session needs a blood tubing set, so demand follows the number of sessions run. Under the Pradhan Mantri National Dialysis Programme, patients were being dialysed on 11,757 machines at 1,674 centres in about 750 districts (Press Information Bureau, New India Samachar, September 2025).

Much of this volume is bought through tenders and rate contracts. Private hospitals and dialysis chains buy through distributors or direct supply agreements, often together with dialysers and fistula needles.

  • Hospital dialysis units, public and private
  • Standalone and chain dialysis centres
  • Operators running government dialysis centres
  • State medical services corporations, through tenders
  • Medical device distributors and export buyers

What wins repeat orders: the set must fit the dialysis machines your buyers run. Pump segment size and drip chamber layout differ between machine models, so start with the configurations used in your target hospitals.

Licences for a hemodialysis blood tubing unit

Licensing sets your start date, because the site must be built, staffed and running its quality system before the audit. Facts below were checked in October 2026.

Device classClass B under the Medical Devices Rules, 2017, as listed in CDSCO's risk classification for nephrology and renal care devices
Manufacturing licenceApply in Form MD-3 to the State Licensing Authority; the licence is granted in Form MD-5
Notified Body auditSite audit within 90 days of the application; the authority decides within 20 days of receiving the audit report
Quality systemQuality management system as set out in the Fifth Schedule of the Rules
Technical staffA graduate engineer, pharmacist or scientist with 2 years in device manufacturing or testing, or a diploma holder with 4 years
Licence validityValid without expiry, subject to a retention fee paid before every five years
GSTMedical instruments and appliances moved to 5% from 22 September 2025; confirm your product's HSN code with your CA
Other approvalsUdyam, GST registration, factory licence and State Pollution Control Board consent, which also covers the ETO steriliser's emissions

Loans and schemes for a blood tubing set plant

MSME term loan with CGTMSE

Guarantee cover up to ₹10 crore

Collateral-free guarantee for eligible micro and small units. The sample's ₹597 lakh term loan sits inside this ceiling.

Scheme for Strengthening of Medical Device Industry

20% of fixed investment, up to ₹10 crore

Department of Pharmaceuticals support for units with turnover up to ₹250 crore that make listed key components, such as polymer tubing components. Check eligibility before counting on it.

PMEGP

Manufacturing projects up to ₹50 lakh

Margin-money subsidy of 15–35%. A licensed clean room plant usually costs more, so it fits only a very small start.

Scheme limits change. Confirm current terms with the bank or the scheme portal before applying.

Mistakes that weaken a project report on hemodialysis blood tubing

  • Showing sales from the month the plant is built

    No set can be sold before the MD-5 licence. The rules allow up to 140 days from application to decision for the audit, its report and the grant, and interest runs meanwhile.

  • Leaving out validation and testing costs

    Sterilisation validation, biocompatibility data and routine ETO residue tests are real costs before and after launch.

  • Ignoring aeration time in stock

    Sets wait for aeration and batch release before dispatch. The sample holds 30 days of finished goods for this reason.

  • Assuming one set fits every machine

    Pump segment sizes and connectors vary by dialysis machine model. A single design limits who can buy.

  • Pricing at MRP instead of tender rates

    Most volume moves through tenders and distributors at prices well below the printed MRP, so revenue and DSCR come out too high.

How NPCS helps you set up a blood tubing set unit

  • Product range and capacityPick set configurations and daily output to match the dialysis machines in your market.
  • Plant and clean room planSize the extrusion, moulding, clean room and sterilisation areas, or plan for contract sterilisation.
  • Bank-ready project reportProjections, DSCR, working capital and the licensing period in the format your lender wants.
  • Licensing checklistThe MD-3 application, quality system documents and approvals list for your state.

NPCS's client list includes 2 assignments for hemodialysis blood tubing and 75 across medical devices, disposables and surgical products. The work is done by the NPCS project team, led by founder Ajay Kumar Gupta.

What's inside the hemodialysis blood tubing sample report

  1. Introduction
  2. Uses and applications
  3. Market potential
  4. Manufacturing process
  5. Raw materials
  6. Plant and machinery
  7. Land, building and utilities
  8. Manpower
  9. Licences and approvals
  10. Project cost and means of finance
  11. Working capital
  12. Projected profitability
  13. Cash flow statement
  14. Projected balance sheet
  15. Depreciation
  16. Term loan repayment
  17. Debt service coverage
  18. Break-even analysis
  19. Financial ratios
  20. Key assumptions
  21. Conclusion
  22. Monthly loan repayment schedule

19 pages, five-year projections, illustrative figures.

Open sample report

Free sample or a report for your project?

What you getFree sampleNPCS report for your project
Capacity and locationTypical unitYour capacity, site and state
FiguresIllustrativeBuilt on current prices and quotations
Machinery suppliers and quotationsNoYes
Market survey for your regionNoYes
Bank or scheme format (PMEGP, term loan)NoYes
Use for a loan applicationNoYes

Real NPCS hemodialysis blood tubing project reports

These are hemodialysis blood tubing project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.

Project reportPlant capacityTotal investmentRate of returnBreak-evenAction
Hemodialysis Blood TubingHomodialysis Blood Tubing Set:1,200,000 Pcs Per Annum₹3.44 crore29%58% Get this report
Hemodialysis Blood Tubing4000 Pcs Per Day₹4.04 crore25%55% Get this report

Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.

Find other projects that fit your budget Search NPCS project profiles by investment, return and break-even, the same search as our Startup Selector.

What clients say about NPCS

4.7

264 Google reviews, as of 20 Oct 2026

Clients most often mention

  • feasibility reports 18
  • project report 16
  • helpful for startups 15
  • detailed reports 8
Read all reviews on Google
  • Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.

    Piyush Singh, Google review, 2026

  • Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended

    Saroj Yadav, Google review, 2026 View on Google

  • In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.

    Shrishti Gautam, Google review, 2026

  • NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.

    Raj Yadav, Google review, 2026

Hemodialysis Blood Tubing project report: frequently asked questions

How much does it cost to set up a hemodialysis blood tubing plant in India?

Our sample report models a 3,900 sets per day plant at ₹795.60 lakh, including ₹365.32 lakh of plant and machinery and ₹225.99 lakh of building. A unit that buys tubing and contracts out sterilisation can start lower, at an indicative ₹1.5–3 crore. Your own cost depends on capacity, location, clean room size and whether you install an in-house ETO steriliser.

Which licence is needed to manufacture blood tubing sets?

Hemodialysis blood tubing is a Class B device under the Medical Devices Rules, 2017. You apply in Form MD-3 to the State Licensing Authority, a Notified Body audits your site, and the licence is issued in Form MD-5. The site must meet the Fifth Schedule quality management system and employ qualified technical staff before the audit.

What raw materials are used in a dialysis blood tubing set?

The main input is medical grade PVC compound for the tubing and pump segment. Drip chambers and connectors are moulded from PP, ABS or polycarbonate. Transducer protectors, clamps, injection ports and caps are usually bought in. In our sample report PVC compound makes up 45% of raw material cost, and ethylene oxide gas for sterilisation 7%.

Is hemodialysis blood tubing manufacturing profitable?

In our illustrative sample, selling at ₹140 per set, the plant earns a 14.4% return on investment in Year 3. It breaks even at 45.3% of capacity and pays back in about 4.5 years. Margins are thin, so profit depends on tender prices, scrap rates in extrusion and assembly, and how quickly hospitals and distributors pay.

Can I get a PMEGP loan for a blood tubing set unit?

PMEGP covers manufacturing projects up to ₹50 lakh with a margin-money subsidy of 15–35%. A licensed unit with a clean room, moulding and sterilisation usually costs well above that, so most promoters take an MSME term loan, often with CGTMSE guarantee cover. PMEGP can suit only a very small assembly start if your lender agrees.

Which machines are needed to make blood tubing sets?

You need a medical tubing extrusion line with diameter gauge, and injection moulding machines with moulds for drip chambers and connectors. Assembly and solvent bonding stations sit inside an ISO Class 8 clean room, followed by a leak tester, a pouch sealer and an ethylene oxide steriliser with aeration room. A quality control laboratory checks leaks, joint strength, sterility and ETO residue.

Is the hemodialysis blood tubing project report PDF free, and can I use it for a loan?

The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report; its figures are representative and not based on a real project. It should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and loan scheme.

Sources and references

  1. Risk classification of medical devices: nephrology and renal careCentral Drugs Standard Control Organisation, checked Oct 2026
  2. Medical Devices Rules, 2017 (G.S.R. 78(E))Ministry of Health and Family Welfare (copy hosted by IIT Madras), checked Oct 2026
  3. Regulatory pathway under the Medical Devices Rules, 2017Central Drugs Standard Control Organisation, checked Oct 2026
  4. GST rate changes: medical devices and equipmentPress Information Bureau, Government of India, checked Oct 2026
  5. GST Council cuts rates on insurance, medicines and daily essentialsNews On AIR, Prasar Bharati, checked Oct 2026
  6. Pradhan Mantri National Dialysis Programme, New India Samachar, 16-30 September 2025Press Information Bureau, Government of India, checked Oct 2026
  7. Guidelines for the Scheme for Strengthening of Medical Device IndustryDepartment of Pharmaceuticals, Government of India, checked Oct 2026
  8. Credit Guarantee Fund Trust for Micro and Small EnterprisesCGTMSE, checked Oct 2026
  9. Prime Minister's Employment Generation Programme (PMEGP)MSME Department, Government of Uttar Pradesh, checked Oct 2026
Ajay Kumar Gupta, founder of NPCS

Who prepares NPCS reports

The NPCS project team, led by Ajay Kumar Gupta

This page and its sample report are prepared and reviewed by the NPCS project team, which has written techno-economic feasibility studies and detailed project reports since 1994.

Ajay Kumar Gupta founded Niir Project Consultancy Services (NPCS) and leads the organisation. With 40 years of experience in MSME project consulting, he has built the team that has delivered more than 28,000 project reports for clients worldwide, helping entrepreneurs plan and finance profitable manufacturing businesses.

Ajay Kumar Gupta on LinkedIn

Published
Last updated
Next review
Oct 2027
Reviewed by
NPCS project team

This page is reviewed every 12 months, or sooner when scheme limits, GST rates, BIS rules or pollution categories change. The sample report is illustrative: its figures are generated from industry-typical ratios for a unit of this size, checked so every statement balances, and are not taken from any client project.

Planning a different medical devices project?

These are a few of the projects we advise on. NPCS's published client list records 75 medical devices assignments, so tell us what you are planning.

Tell us your project

Recent medical devices assignments

  • Trishakti Associates
    Project Planning and Feasibility Report on Surgical Latex and Nitrile GlovesAurangabad, 2026
  • Gmd Cura LLP
    Detailed Feasibility Study on Blood BagsDehradun, 2026
  • Medi Plus (India) Ltd
    Techno-Economic Project Report on India Single-Use Medical Devices MarketBahadurgarh, 2026
  • KRH Healthcare Private Limited
    Project Report on Blood Bags with medical-grade PVC film and tubingNashik, 2025
  • Shri Ganpati Timber & Plywood
    Project Feasibility Report on Disposable Plastic Syringes for Industrial ApplicationsNashik, 2025
  • Meditrans Performance Pvt. Ltd
    Industrial Project Report on Medical DisposablesPanchkula, 2025
  • Nureca Limited
    Comprehensive Market Research Report on Disposable Plastic SyringesChandigarh, 2024
  • SSAAMUKAA Group of Companies
    Techno-Economic Feasibility Report on Disposable Plastic SyringesBhubaneswar, 2024

Get a hemodialysis blood tubing project report for your plant

Tell us your planned capacity, location and loan scheme. Our team will confirm the scope and price of a report built on current machinery quotations and raw material prices for your region.

Reports are prepared in the format banks and PMEGP offices ask for, with five-year projections, DSCR and break-even.

Request a Hemodialysis Blood Tubing Project Report

Share your plan and our team will call you back within 24 hours.

Start with the sample, then plan your own unit

Open the free hemodialysis blood tubing sample report to see the format, then talk to NPCS about a report for your capacity and location.

Sample PDF WhatsApp
Hemodialysis Blood Tubing sample project report (illustrative) Download New tab

Illustrative sample. Figures are representative and not from a real project.

Call Us WhatsApp