What is a glycerine project report?
A glycerine project report is a detailed project report (DPR) for a plant that refines crude glycerine into 99.5% grade glycerine by pre-treatment, vacuum distillation and carbon bleaching. It sets out the process, machinery, crude supply, market, project cost, means of finance, five-year projections, DSCR and break-even a lender needs.
Promoters use it to size the refinery and raise a term loan; oleochemical, soap and biodiesel companies use it to judge whether refining their own crude pays.
Also known as: glycerine refinery project report, glycerol manufacturing project report, DPR for glycerine plant, glycerine business plan.
Glycerine manufacturing plant cost in India: sample economics
Our sample report models a refinery that turns bought-in crude glycerine into refined grade at 8.8 MT per day, or 2,904 MT per year at full capacity. It runs 330 days a year, starts at 60% of capacity and reaches 80% in Year 5.
Refined glycerine is priced at ₹83,200 per MT ex-factory. At that price the average DSCR is 1.42, and the lowest year is 1.24. DSCR (debt service coverage ratio) is the cash available for each rupee of loan instalment.
| Land and site development | 55.00 |
|---|---|
| Building and civil works | 207.97 |
| Plant and machinery | 404.14 |
| Other fixed assets | 48.94 |
| Contingencies | 30.61 |
| Preliminary and pre-operative | 18.67 |
| Working capital margin | 57.30 |
| Total | 822.63 |
| Promoter's contribution (25%) | 205.66 |
|---|---|
| Term loan from bank (75%) | 616.97 |
| Cash credit limit (separate) | 171.88 |
| Total project cost | 822.63 |
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.
Glycerine manufacturing process, from crude to 99.5% grade
Refining removes three things from crude glycerine: soaps and fatty matter, water and methanol, and dissolved salts. Each step below targets one of them, and distillation does most of the work.
- Pre-treatment
Crude is acidified with hydrochloric or phosphoric acid so soaps split into free fatty acids, which float off and are removed in a decanter.
- Neutralisation and filtration
The glycerine layer is brought back to neutral with caustic soda and filtered with filter aid to take out fine solids.
- Dewatering
Water and any methanol left from biodiesel are evaporated under vacuum, so the still is fed a concentrated stream.
- Vacuum distillation
Glycerine boils off under high vacuum at about 160–175°C; deep vacuum keeps the temperature low enough to stop the product darkening.
- Residue recovery
A thin film evaporator strips more glycerine from the column bottoms before the salty residue, often called glycerine pitch, is discharged.
- Bleaching
The distillate runs through activated carbon beds that remove colour and odour, then through polishing filters.
- Testing and drumming
Each batch is tested for glycerine content, colour, water and glycol impurities, then filled into drums or tankers.
Which crude glycerine and refining route suit your plant?
The source of your crude decides the pre-treatment, the salt load on the still and how much residue you discard. Most Indian refineries buy from more than one source, so the plant should be designed for the dirtiest crude it will see.
| Biodiesel crude glycerine | Usually 80–85% glycerine after methanol recovery, with salt from the catalyst and fatty matter. Needs full acid pre-treatment and distillation. |
|---|---|
| Soap spent lye | Weak glycerine solution with a heavy salt load. Must be treated and concentrated before it can be distilled, so evaporation cost is high. |
| Fat-splitting sweet water | Low in salt and cleaner than the other two, but dilute. Needs evaporation to crude strength, then gives lower residue in the still. |
| Distillation route | Handles salty crude from any source and reaches pharmaceutical purity; needs steam, deep vacuum and the largest capital outlay. |
| Ion exchange route | Lower energy and suits low-salt sweet water, but resin regeneration chemicals and effluent rise sharply with salty crude. |
Design for supply, not for the best crude: a still sized only for clean sweet water loses output and colour on biodiesel crude. That switch often comes when crude is scarce.
Raw materials for glycerine refining
Crude glycerine is 88% of raw material cost in our sample, and raw materials are 60.7% of sales. That makes the buying price of crude the single biggest lever on profit. A tonne of 80–85% crude yields well under a tonne of refined glycerine, so the report should price crude per tonne of glycerine content, not per tonne of liquid.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Crude glycerine (80–85%) | 88% | 904.09 |
| Activated carbon | 4% | 41.09 |
| Caustic soda lye | 3% | 30.82 |
| Hydrochloric or phosphoric acid | 2% | 20.55 |
| Filter aid and process chemicals | 3% | 30.82 |
| Total | 100% | 1,027.37 |
Shares and amounts are from our illustrative sample. Packing is costed separately at 4% of sales.
Machinery for a glycerine refinery
The vacuum distillation column with its reboiler is the largest machinery item in our sample at ₹113.16 lakh. The vacuum system and the heating plant come next, because the still cannot run without them.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Crude storage tanks and feed pumps | Hold and blend crude from different suppliers | 32.33 |
| Pre-treatment reactor with decanter | Splits soaps and separates fatty acids | 40.41 |
| Vacuum distillation column with reboiler | Boils off pure glycerine, leaves salts behind | 113.16 |
| Thin film evaporator | Recovers glycerine from still bottoms | 40.41 |
| Steam ejector and vacuum pump system | Holds the deep vacuum distillation needs | 48.50 |
| Carbon bleaching columns and filters | Remove colour and odour | 40.41 |
| Thermic fluid heater and steam boiler | Heat the reboiler and evaporators | 48.50 |
| Product tanks and drum filling | Store and pack refined glycerine | 20.21 |
| QC laboratory with gas chromatograph | Tests purity and glycol impurities per batch | 20.21 |
| Total plant and machinery | 404.14 | |
Costs are the sample report's estimates for an 8.8 MT per day refinery. Get current quotations before you finalise.
Utilities and manpower for a glycerine plant
A glycerine refinery is an energy plant as much as a chemical plant. Heat drives dewatering and distillation, and vacuum decides product colour.
| Power and fuel | 6.4% of sales in our sample, or ₹108.11 lakh in Year 3, for the heater, boiler, vacuum pumps and cooling |
|---|---|
| Process heat | Thermic fluid or steam to hold the reboiler at about 160–175°C, plus steam for the ejectors |
| Vacuum | Multi-stage steam ejectors backed by vacuum pumps; a leak raises still temperature and darkens the product |
| Cooling water | Cooling tower and condensers for the column overheads and ejector steam |
| Manpower | 39 people in our sample: 6 in management and supervision, 14 skilled operators, 19 semi-skilled and unskilled workers |
| Wage bill | ₹88.62 lakh in Year 1 of the sample, rising 5% a year |
Licences, standards and tax for a glycerine plant
| Business registration | Udyam (MSME) registration and GST registration |
|---|---|
| Pollution board consent | Consent to establish and operate from the State Pollution Control Board, which sets the category for your plant; confirm it before buying land, because it decides where you can locate |
| Factory licence | Under the Factories Act or the state's labour law where worker thresholds apply |
| Product standard | IS 1796:2023, Glycerine: Specification (third revision) from the Bureau of Indian Standards, the usual reference for grades and test methods |
| Glycol testing for pharma buyers | The Indian Pharmacopoeia Commission issued GC methods for diethylene glycol (DEG) and ethylene glycol (EG) in oral liquids in January 2026; syrup makers expect batch-wise DEG and EG results from glycerine suppliers |
| GST on crude glycerine | Crude glycerol (HSN 1520) is taxed at 5% as of October 2026, under Notification 9/2025-Integrated Tax (Rate); confirm the rate on refined glycerine with your tax adviser |
Licence rules vary by state. Check with the State Drugs Controller whether your grade and pack need a drug licence before selling IP grade.
Market for refined glycerine in India
Demand comes from products that need a safe humectant and sweetener: cough syrups, ointments, toothpaste, skin creams and confectionery. Industrial buyers use technical grade for alkyd resins, polyols and other chemical intermediates.
Supply depends on other industries. Crude glycerine is a by-product of soap, fatty acid and biodiesel plants, and crude prices move with their output rather than with glycerine demand. A refinery's position is strongest when it has long-term crude contracts and approvals from a few large buyers.
- Pharmaceutical and syrup manufacturers
- Toothpaste and oral care makers
- Soap, cosmetics and personal care producers
- Food and confectionery processors
- Resin and chemical manufacturers
- Chemical traders and exporters
Approval takes time: pharmaceutical and toothpaste buyers audit a new supplier and test trial lots before regular orders, so the report should allow a slower sales ramp for these grades.
Mistakes that weaken a glycerine project report
- Treating crude as pure glycerine
Crude at 80–85% content, minus still residue, gives far less refined output per tonne than a one-to-one yield shows.
- Pricing all output at pharma grade
Part of the distillate and the recovered fraction sells as technical grade at a lower price; revenue should reflect the real grade mix.
- Relying on one crude supplier
If a biodiesel or soap plant cuts output, the refinery stops. Lenders look for two or more sources and a stock buffer.
- Under-sizing the vacuum system
Weak vacuum forces a hotter still, which darkens glycerine and raises carbon use and rejections.
- No budget for residue disposal
Glycerine pitch and spent carbon need approved disposal, and the cost belongs in running expenses.
How NPCS helps you set up a glycerine plant
- Crude source and capacitySize the refinery to the crude you can secure and the grades your buyers want.
- Process route and machineryCompare distillation and ion exchange and get still, vacuum and heater quotations.
- Bank-ready project reportProjections, DSCR, crude-price sensitivity and working capital in your lender's format.
- Approvals and layoutPlant layout, utilities load and the approvals list for your state.
NPCS has worked on specialty chemical projects since 1994. Its client list records 269 assignments in the sector, including one on glycerine.
What's inside the glycerine sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
18 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS glycerine project reports
These are glycerine project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Glycerine | 1 Ton/Day | ₹1.74 crore | 40% | 43% | Get this report |
| Natural Glycerine | Natural Glycerin: 50 MT / Day Crude Fatty Acid-by product: 30 MT / Day | ₹15.37 crore | 30% | 55% | Get this report |
| Natural Glycerine | 50.0 MT/Day, Crude Fatty Acid by product : 30.0 MT/Day | ₹24.75 crore | 38% | 33% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Glycerine project report: frequently asked questions
What is the glycerine manufacturing plant cost in India?
A small refinery of about 3–5 MT per day needs roughly ₹4–6 crore, and a 20–30 MT per day plant about ₹15–25 crore, including land, building and working capital margin. Our sample report models an 8.8 MT per day plant at ₹822.63 lakh. These are indicative figures; the cost of your plant depends on crude source, purity target and site.
What is the raw material for glycerine manufacturing?
Crude glycerine is the main raw material. It comes from biodiesel plants, soap makers and fat-splitting units, usually at 80–85% glycerine content. In our sample report crude glycerine is 88% of raw material cost, with activated carbon, caustic soda, acid and filter aid making up the rest.
How is crude glycerine refined to 99.5% purity?
The crude is first acidified and neutralised to remove soaps and fatty matter, then dewatered. It is distilled under high vacuum at about 160–175°C so that salts and heavy residue stay behind. The distillate is bleached over activated carbon and tested for purity, colour and glycol content before drumming.
Is a glycerine refinery profitable?
In our illustrative sample, an 8.8 MT per day plant earns ₹114.79 lakh net profit in Year 3 on sales of ₹1,691.29 lakh. That is a 14% return on investment, with break-even at 45% of capacity. Profit swings with the gap between crude and refined glycerine prices, so a report should test a narrower spread.
What is the difference between crude and refined glycerine?
Crude glycerine is a by-product that holds 80–85% glycerine with water, salts, methanol traces and fatty matter. Refined glycerine is distilled and bleached to about 99.5% purity, clear and odourless, and is the grade pharmaceutical, toothpaste and food makers buy. Crude glycerol falls under HSN 1520 and attracts 5% GST as of October 2026.
Is the glycerine project report PDF free, and can I use it for a bank loan?
The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS project report on glycerine. Its figures are representative and not based on a real plant, so do not submit it to a bank. For a loan, NPCS prepares a report for your capacity, crude source and location.
Sources and references
- Notification No. 9/2025-Integrated Tax (Rate), 17 September 2025 (Schedule I, S. No. 97: glycerol, crude, HSN 1520)Central Board of Indirect Taxes and Customs, checked Oct 2026
- IS 1796:2023 Glycerine: Specification (Third Revision)Bureau of Indian Standards, checked Oct 2026
- IPC/GD/11 Testing of DEG and EG in oral liquids, Version 2.0 (15 January 2026)Indian Pharmacopoeia Commission, checked Oct 2026
