WhatsApp us
Request a Quote

Project reports in Essential Oils and Extracts

Garlic Oil Manufacturing Project Report

Plant cost, distillation machinery, garlic sourcing and five-year profitability for a garlic oil unit, with a free sample report you can open right now.

Also known as: garlic essential oil

Plant capacity
20 kg per day
Total project cost
₹144 lakh
Plant and machinery
₹67 lakh
Return on investment
30% (Year 3)
Break-even
35% of capacity
Payback period
About 2.9 years

Figures from our illustrative sample report for a typical unit. They show the format of an NPCS report and are not quotes for your project.

What is a garlic oil project report?

A garlic oil project report is a detailed project report (DPR) for a unit that steam-distils crushed garlic to recover its pungent essential oil. It sets out the process, garlic sourcing, machinery, market, project cost, means of finance, five-year projections, DSCR and break-even that a bank or subsidy office checks before funding.

Entrepreneurs use a project report on garlic oil to size the plant and raise a term loan; lenders use it to judge whether the unit can repay.

Also known as: garlic essential oil.

What a bank checks in a garlic oil project report

A credit officer reads a garlic oil report for one thing first: can the unit buy enough cheap garlic to repay the loan. These four values from our sample report are the ones that decide it.

48.5%Raw material share of sales

Almost half of every rupee of sales goes to buying inputs. A report that shows much less has usually assumed cheap garlic or a high yield without testing either.

93%Garlic share of raw material cost

Drying salts and water treatment chemicals are minor. A rise in the garlic price moves profit and DSCR (the cash available to repay the loan, divided by the instalment) more than any other cost.

6.4%Power and fuel share of sales

Steam for distillation comes from a boiler that runs for hours on every batch. Under-costing boiler fuel is a common gap in garlic oil reports.

60 daysGarlic stock held

Garlic is cheapest after the spring harvest, so units buy ahead and store it. The stock raises the working capital limit the bank must sanction.

Values are the assumptions in our illustrative sample. Your report uses figures for your capacity, garlic source and buyers.

Garlic oil manufacturing plant cost in India

The cost follows the number and size of distillation vessels, which is set by how much garlic you can process each day. At a yield of 0.1–0.2%, every kilogram of oil needs roughly 500–1,000 kg of garlic, so even a small unit handles several tonnes a day.

Small unit

₹40–65 lakh

About 4–6 kg of oil per day, 1–2 stills

  • Machinery₹22–35 lakh
  • Shed fit-out (rented shed)₹8–15 lakh
  • Working capital margin₹5–10 lakh

Fits PMEGP or PMFME, subject to limits

Mid-size unit

₹75–110 lakh

About 8–12 kg of oil per day

  • Machinery₹40–55 lakh
  • Land and building₹25–40 lakh
  • Working capital margin₹8–12 lakh

MSME term loan, often with CGTMSE cover

Our sample report

Larger unit

₹144.37 lakh

20 kg per day, 6,000 kg per year

  • Plant and machinery₹67.12 lakh
  • Building and civil works₹36.39 lakh
  • Working capital margin₹14.21 lakh

Term loan ₹108.28 lakh (75%), promoter ₹36.09 lakh

Small and mid-size ranges are indicative and exclude land unless stated. Costs vary with still material, boiler type and location.

Garlic oil manufacturing process

Pure garlic oil is made by steam distillation of crushed cloves. The oil is pale yellow to reddish orange, very pungent, and rich in sulphur compounds such as diallyl disulphide, which buyers test for.

  1. Grading and clove separation

    Bulbs are broken into cloves, and soil, stones and rotten cloves are removed so they do not taint the oil.

  2. Crushing

    Cloves are crushed with water into a fine slurry in a wet grinder; finer crushing releases more oil.

  3. Holding

    The slurry stands in closed tanks while the garlic's own enzyme turns alliin into allicin, which breaks down into the oil's sulphur compounds.

  4. Steam distillation

    Steam from the boiler passes through the slurry in stainless steel stills for several hours and carries the volatile oil to a condenser.

  5. Oil separation

    Garlic oil is heavier than water, so a Florentine-type separator collects it at the bottom, unlike most essential oils that float.

  6. Drying and filtration

    Traces of water are removed with anhydrous sodium sulphate and the oil is filtered clear.

  7. Testing and packing

    Each lot is checked for specific gravity, refractive index and odour, then filled in sealed aluminium or HDPE containers.

Garlic and other raw materials for garlic oil

The oil does not need table-grade bulbs. Small, split and low-grade cloves give oil just as well and cost far less, so most units buy them in bulk from mandis in the garlic belt. Madhya Pradesh grows most of India's garlic, followed by Rajasthan.

Raw material cost in our sample report, Year 3
Raw materialShare of costYear 3 (₹ lakh)
Garlic bulbs (small and low-grade cloves)93%135.37
Anhydrous sodium sulphate and filter aids4%5.82
Water treatment chemicals3%4.37
Total100%145.56

Garlic prices swing widely from year to year. Your report should test the project at a higher garlic price as well as the base case.

Machinery for a garlic oil plant

The stills and boiler take about 45% of the sample's machinery cost. Stainless steel is the norm for everything that touches the slurry or oil, to keep the oil free of metallic taint.

MachineWhat it doesSample cost (₹ lakh)
Bulb breaker and clove separatorSplits bulbs and removes skin and dirt5.37
Garlic crusher and wet grinderTurns cloves into slurry6.71
Slurry holding tanksHold the slurry while flavour compounds form5.37
Steam distillation vesselsDistil the oil out of the slurry20.13
Steam boilerSupplies steam to the stills10.07
Condensers and oil separatorsCool the vapour and collect the heavy oil8.05
Oil drying and filtration unitRemoves water and particles3.36
Effluent treatment systemTreats distillation water before discharge4.70
Quality control laboratoryChecks each lot before dispatch3.36
Total plant and machinery67.12

Costs are the sample report's estimates for a 20 kg per day unit. Get current quotations before you finalise.

Who buys garlic oil in India

Garlic oil is sold by the kilogram to companies that use tiny amounts per pack. Seasoning and snack makers use it as a concentrated garlic flavour, while capsule and Ayurvedic makers use it as an active ingredient. Each lot is judged on odour and sulphur content, so a new unit sells on test reports and steady quality rather than on price alone.

  • Seasoning, flavour and spice blend houses
  • Snack, sauce and instant noodle makers
  • Garlic capsule and nutraceutical companies
  • Ayurvedic and herbal medicine makers
  • Poultry feed and premix manufacturers
  • Exporters and overseas flavour buyers

Where a new unit wins: the margin is made at the mandi, not the factory gate. A plant near the garlic belt that buys low-grade cloves after harvest and stores them well can undercut units that buy year-round.

Licences and approvals for a garlic oil unit

Garlic oil sold for food or supplements is a food ingredient, so food safety rules apply on top of the usual factory approvals.

Business registrationUdyam (MSME) registration and GST registration
Food safetyFSSAI licence; the tier depends on daily production capacity, and food exporters need a central licence whatever their size
Pollution board consentConsent to establish and operate from the State Pollution Control Board, with a plan for distillation water and spent garlic slurry; the category is set by each state
Factory licenceUnder the Factories Act where worker and power thresholds apply; rules vary by state
Lot testingTest report for each lot (specific gravity, refractive index, odour), as capsule and flavour buyers usually ask for it

Loans and schemes for a garlic oil unit

PMEGP

Manufacturing projects up to ₹50 lakh

Margin money subsidy of 15–35% of project cost for new units. Suits a small unit with one or two stills.

PMFME

35% subsidy, up to ₹10 lakh

Credit-linked subsidy for micro food processing units. The promoter brings 10% and the bank lends the rest.

MSME term loan with CGTMSE

Guarantee cover up to ₹10 crore

Collateral-free guarantee cover for eligible micro and small enterprises; the usual route for a mid-size or larger unit.

Scheme limits change. Confirm current terms with the bank or the scheme portal before applying.

Mistakes that weaken a garlic oil business plan

  • Assuming a yield nobody has tested

    Moving from 0.2% to 0.1% doubles the garlic needed per kilogram of oil. Base the report on a trial distillation of the garlic you will actually buy.

  • Pricing oil at small-bottle rates

    Online prices for 10 ml or 30 ml bottles are many times the bulk rate a flavour house pays. Use ex-factory prices per kilogram.

  • Leaving seasonal garlic stock out of working capital

    Buying after harvest needs cash and dry, ventilated storage. Without it the cash credit limit is too small in the first year.

  • No plan for spent slurry and odour

    Every tonne of garlic leaves wet residue and strongly smelling water. Pollution boards and neighbours will ask how it is treated and disposed of.

  • Mixing up pure and diluted oil

    Garlic oil diluted in vegetable oil sells at a fraction of the price. The report must state which grade you make and who buys it.

How NPCS helps you set up a garlic oil unit

  • Capacity and garlic sourcingSize the stills to the garlic you can buy each season and plan storage.
  • Distillation plant and suppliersCompare still, boiler and separator designs and get quotations.
  • Bank-ready project reportProjections, DSCR and working capital in the format your lender wants.
  • Approvals and effluent planFSSAI tier, pollution consent and a layout that handles slurry and odour.

NPCS's client list includes 36 assignments in essential oils and extracts, among them market research on garlic oil. NPCS has prepared project reports and feasibility studies since 1994, for entrepreneurs, banks and companies in India and abroad.

What's inside the garlic oil sample report

  1. Introduction
  2. Uses and applications
  3. Market potential
  4. Manufacturing process
  5. Raw materials
  6. Plant and machinery
  7. Land, building and utilities
  8. Manpower
  9. Licences and approvals
  10. Project cost and means of finance
  11. Working capital
  12. Projected profitability
  13. Cash flow statement
  14. Projected balance sheet
  15. Depreciation
  16. Term loan repayment
  17. Debt service coverage
  18. Break-even analysis
  19. Financial ratios
  20. Key assumptions
  21. Conclusion
  22. Monthly loan repayment schedule

18 pages, five-year projections, illustrative figures.

Open sample report

Free sample or a report for your project?

What you getFree sampleNPCS report for your project
Capacity and locationTypical unitYour capacity, site and state
FiguresIllustrativeBuilt on current prices and quotations
Machinery suppliers and quotationsNoYes
Market survey for your regionNoYes
Bank or scheme format (PMEGP, term loan)NoYes
Use for a loan applicationNoYes

Real NPCS garlic oil project reports

These are garlic oil project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.

Project reportPlant capacityTotal investmentRate of returnBreak-evenAction
Garlic Oil and PowderGarlic Oil :10 Kgs/ Day , Garlic Powder:2 MT /Day₹2.41 crore25%56% Get this report
Ginger (Dry, Powder, Flakes, Oil) & Garlic (Powder, Flakes, Oil) ProcessingGarlic Flakes 750kg, Garlic Powder 750kg & Garlic Oil 10kg/Day, Ginger Dry 500kg, Ginger Powder 500kg, Ginger Flakes 500kg & Ginger Oil 10 k…₹2.65 crore37%42% Get this report
Garlic OilGarlic Oil :25.0 Kgs/ Day , Garlic Powder as bye Product: 5 MT /Day₹3.11 crore27%56% Get this report

Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.

Find other projects that fit your budget Search NPCS project profiles by investment, return and break-even, the same search as our Startup Selector.

What clients say about NPCS

4.7

264 Google reviews, as of 20 Oct 2026

Clients most often mention

  • feasibility reports 18
  • project report 16
  • helpful for startups 15
  • detailed reports 8
Read all reviews on Google
  • Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.

    Piyush Singh, Google review, 2026

  • Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended

    Saroj Yadav, Google review, 2026 View on Google

  • In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.

    Shrishti Gautam, Google review, 2026

  • NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.

    Raj Yadav, Google review, 2026

Garlic Oil project report: frequently asked questions

How much does it cost to set up a garlic oil manufacturing plant in India?

A small unit making 4–6 kg of oil a day in a rented shed needs roughly ₹40–65 lakh. An 8–12 kg per day unit needs about ₹75–110 lakh, including working capital margin. Our sample report models a 20 kg per day unit at ₹144.37 lakh. These are indicative figures; your project report works out the cost for your capacity, garlic source and location.

How much garlic is needed to make 1 kg of garlic oil?

Steam distillation usually recovers about 0.1–0.2% of the garlic's weight as oil, so 1 kg of oil needs roughly 500–1,000 kg of garlic. Yield depends on the variety, how dry the cloves are and how well the slurry is held and distilled. A trial distillation on your own garlic lot is the best way to fix the figure in a report.

How is garlic oil made?

Pure garlic oil is made by steam distillation. Cloves are crushed with water, the slurry is held briefly so its natural enzyme forms the flavour compounds, and steam then carries the oil to a condenser. The oil is heavier than water, so it is drawn off from the bottom of the separator, dried and filtered. Garlic-infused cooking oil is a different, much weaker product.

Is a garlic oil business profitable?

In our illustrative sample, a 20 kg per day unit reaches a 30% return on investment in Year 3. Break-even is at about 35% of capacity and payback takes about 2.9 years. Real profit depends mostly on what you pay for garlic, the oil yield you achieve and how much you sell to buyers who pay for tested quality.

Which licence is needed to make garlic oil?

Food-grade garlic oil needs an FSSAI licence. FSSAI's eligibility table links the tier to daily production capacity, and food exporters need a central licence whatever their size. You also need Udyam and GST registration, pollution board consent and the usual factory approvals. Confirm the current FSSAI tier on the FoSCoS portal before you apply.

Can I get a PMEGP or PMFME loan for a garlic oil unit?

A small unit can, if it fits the limits. PMEGP funds new manufacturing projects up to ₹50 lakh with a margin money subsidy of 15–35%. PMFME gives micro food processing units a 35% credit-linked subsidy, capped at ₹10 lakh. Larger units usually take an MSME term loan, often with CGTMSE guarantee cover.

Is the garlic oil project report PDF free, and can I use it for a loan?

The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report; its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and loan scheme.

Sources and references

  1. Prime Minister's Employment Generation Programme (PMEGP) guideDistrict Industries Centre, Ganjam, Government of Odisha, checked Oct 2026
  2. PM Formalisation of Micro Food Processing Enterprises (PMFME) scheme noteDistrict Administration, Cuttack, Government of Odisha, checked Oct 2026
  3. Credit Guarantee Fund Trust for Micro and Small EnterprisesCGTMSE, checked Oct 2026
  4. Eligibility for FSSAI registration and licence by kind of businessFood Safety and Standards Authority of India, checked Oct 2026
  5. Garlic: state-wise area and productionDirectorate of Arecanut and Spices Development, Ministry of Agriculture and Farmers Welfare, checked Oct 2026

Recommended reading on garlic oil

Ajay Kumar Gupta, founder of NPCS

Who prepares NPCS reports

The NPCS project team, led by Ajay Kumar Gupta

This page and its sample report are prepared and reviewed by the NPCS project team, which has written techno-economic feasibility studies and detailed project reports since 1994.

Ajay Kumar Gupta founded Niir Project Consultancy Services (NPCS) and leads the organisation. With 40 years of experience in MSME project consulting, he has built the team that has delivered more than 28,000 project reports for clients worldwide, helping entrepreneurs plan and finance profitable manufacturing businesses.

Ajay Kumar Gupta on LinkedIn

Published
Last updated
Next review
Oct 2027
Reviewed by
NPCS project team

This page is reviewed every 12 months, or sooner when scheme limits, GST rates, BIS rules or pollution categories change. The sample report is illustrative: its figures are generated from industry-typical ratios for a unit of this size, checked so every statement balances, and are not taken from any client project.

Planning a different essential oils and extracts project?

These are a few of the projects we advise on. NPCS's published client list records 36 essential oils and extracts assignments, so tell us what you are planning.

Tell us your project

Recent essential oils and extracts assignments

  • Reliance Solutions Limited
    Comprehensive Market Research Report on Garlic oil for medicinal and culinary usesBangladesh, 2024
  • Isante Agri Private Limited
    Comprehensive Market Research Report on Curcumin ExtractionGurugram, 2023
  • Emmera Naturals Pvt. Ltd
    Project Feasibility Report on Essential Oils and Oleoresins for Industrial ApplicationsAngamaly, 2023
  • Masterbrands Do Brasil Ltda
    Pre-Feasibility Report on Menthol Crystals from Mint OilBrazil, 2023
  • DMD Gold Prosperity Private Limited
    Techno-Economic Project Report on E-Waste Recycling for Extraction of Precious MetalsPune, 2022
  • Andhra Pradesh State Fiber Net Limited
    Comprehensive Market Research Report on Chilli OleoresinVijayawada, 2022
  • N K Agro Exports (India) Pvt. Ltd
    Detailed Feasibility Study on Chilli OleoresinWest Godavari, 2022
  • BIES Limehouse Enterprise
    Techno-Economic Project Report on Ginger Oil & Ginger PowderNigeria, 2022

Get a garlic oil project report for your plant

Tell us your planned capacity, location and loan scheme. Our team will confirm the scope and price of a report built on current machinery quotations and raw material prices for your region.

Reports are prepared in the format banks and PMEGP offices ask for, with five-year projections, DSCR and break-even.

Request a Garlic Oil Project Report

Share your plan and our team will call you back within 24 hours.

Start with the sample, then plan your own unit

Open the free garlic oil sample report to see the format, then talk to NPCS about a report for your capacity and location.

Sample PDF WhatsApp
Garlic Oil sample project report (illustrative) Download New tab

Illustrative sample. Figures are representative and not from a real project.

Call Us WhatsApp