What is a ethanol from molasses project report?
An ethanol from molasses project report is a detailed project report for a distillery that ferments cane molasses, distils the wash and dehydrates it to fuel-grade ethanol. It sets out the process, ZLD system, machinery, molasses supply, approvals, project cost, finance, five-year projections, DSCR and break-even that a lender and the approving authorities review.
Sugar mills, standalone promoters and lenders use it to size the plant, plan molasses supply and test whether ethanol sales can repay the loan.
Also known as: molasses ethanol plant project report, molasses based distillery DPR, ethanol from molasses business plan, project report on ethanol from molasses.
Ethanol from molasses manufacturing plant cost in India
The sample report models a 10 KL per day distillery running 330 days a year, which gives 3,300 KL a year at full capacity. It starts at 60% utilisation and reaches 80% in Year 5, selling ethanol at ₹59,300 per KL.
| Land and site development | 77.53 |
|---|---|
| Building and civil works | 190.65 |
| Plant and machinery | 516.52 |
| Other fixed assets | 76.70 |
| Contingencies | 35.36 |
| Preliminary and pre-operative | 22.42 |
| Working capital margin | 44.79 |
| Total | 963.97 |
| Promoter's contribution (25%) | 240.99 |
|---|---|
| Term loan from bank (75%) | 722.98 |
| Cash credit limit (separate) | 134.36 |
| Total project cost | 963.97 |
Most new distilleries are larger than the sample: environmental clearance filings show a 60 KL per day distillery beside a sugar mill estimated at ₹76 crore and a 180 KL per day expansion at ₹160 crore. That is an indicative ₹0.9–1.3 crore per KL per day, and the sample's ₹0.96 crore sits inside it.
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All sample figures are illustrative.
Ethanol from molasses manufacturing process
A molasses distillery has two linked plants: the alcohol side that makes fuel ethanol, and the spent wash side that keeps the unit at zero liquid discharge. If either one stops, both stop.
- Molasses testing and dilution
Each tanker is weighed and tested for fermentable sugar, then diluted with recycled process water to the strength the yeast handles best.
- Yeast propagation
A pure yeast culture is built up in small vessels before it seeds the main fermenters, which keeps bacterial contamination down.
- Fermentation
Yeast turns the sugar into alcohol at about 32–34°C over 24–30 hours, giving a wash of 8–10% alcohol and releasing carbon dioxide.
- Multi-pressure distillation
Analyser and rectifier columns working at different pressures strip alcohol from the wash and raise it to rectified spirit of about 94–95%, reusing heat between columns.
- Molecular sieve dehydration
Rectified spirit vapour passes through zeolite beds that hold back the last water, giving anhydrous ethanol of 99.6% or more for blending.
- Spent wash concentration
The hot spent wash left after distillation goes to a multiple-effect evaporator, which concentrates it to about 55–60% solids.
- Incineration and water recovery
Concentrated spent wash is fired in the incineration boiler to raise process steam, and condensate is polished and returned to the plant.
- Storage and dispatch
Ethanol is held in bonded tanks, tested against IS 15464 and sent by tanker to oil company depots under the supply allocation.
C-heavy or B-heavy molasses: which feedstock to plan for
The grade of molasses you can buy sets your yield, your raw material bill and the number of days you can run. Plan the distillery around the grade your nearby mills actually sell.
| C-heavy molasses | Final molasses after the mill has taken out as much sugar as it can. About 240 litres of ethanol per tonne in a filed pre-feasibility report |
|---|---|
| B-heavy molasses | Drawn earlier in sugar boiling, so it keeps more sugar. About 320 litres per tonne in the same report; the mill gives up some sugar output to supply it |
| Cane juice or syrup | Run only during the crushing season by distilleries attached to mills. About 70 litres per tonne of cane in the same report |
| OMC price for C-heavy route | ₹57.97 per litre for ESY 2024-25, excluding GST and transport; prices are fixed by feedstock for each supply year |
| Dehydration | Molecular sieve dehydration of rectified spirit to anhydrous ethanol; it adds steam load of about 0.5–0.6 kg per litre |
Yields are from one filed pre-feasibility report and vary with sugar content and fermentation efficiency.
Raw materials for a molasses ethanol distillery
Molasses is almost the whole raw material bill. Standalone units buy it from sugar mills by tender during the crushing season and store enough in mild steel tanks to run after the season ends.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Cane molasses (B-heavy or C-heavy) | 90% | 622.40 |
| Yeast and yeast nutrients (urea and DAP) | 3% | 20.75 |
| Sulphuric acid for wash pH control | 2% | 13.83 |
| Antifoam, enzymes and process chemicals | 2% | 13.83 |
| Molecular sieve beads and laboratory reagents | 3% | 20.75 |
| Total | 100% | 691.56 |
In the sample, raw materials are 50.5% of sales in Year 3, at 70% utilisation. Molasses attracts 5% GST.
Machinery for an ethanol from molasses plant
In the sample, the distillation unit is the largest single item, and the evaporator and incineration boiler together cost more than it. Pollution control equipment is part of the core plant, not an extra.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Molasses receiving, weighing and storage | Unloads, weighs and stores molasses for the off-season | 36.16 |
| Yeast propagation and continuous fermentation with CO2 scrubber | Grows yeast, ferments the wash and recovers alcohol from the vent gas | 87.81 |
| Multi-pressure distillation unit | Separates rectified spirit from the wash | 103.30 |
| Molecular sieve dehydration unit | Removes the last water to make fuel ethanol | 51.65 |
| Spent wash multiple-effect evaporator | Concentrates spent wash for firing | 77.48 |
| Spent wash fired incineration boiler and turbine | Burns concentrated spent wash to make steam and power | 92.97 |
| Condensate polishing unit and cooling towers | Treats condensate for reuse and cools the columns | 30.99 |
| Ethanol storage tanks with tanker loading | Bonded storage and dispatch | 20.66 |
| Laboratory, instrumentation and DCS controls | Tests every batch and runs the plant | 15.50 |
| Total plant and machinery | 516.52 | |
Costs are the sample report's estimates for a 10 KL per day plant. Get current quotations before you finalise.
Water, steam and zero liquid discharge norms
Spent wash is the main design problem in a molasses distillery. The Central Pollution Control Board sets the norms below, and the State Pollution Control Board checks them at consent stage.
| Zero liquid discharge | Required at all molasses based distilleries under a 2015 CPCB direction; new standalone units must achieve it by concentration and incineration |
|---|---|
| Spent wash generation | To be cut to 6–8 litres per litre of alcohol; raw spent wash can run 8–16 litres per litre |
| Fresh water use | 8–10 litres per litre of alcohol, with about 80% water recovery |
| Spent wash storage | Impermeable storage of no more than 7 days' production for units on the incineration route |
| Recycled condensate | Polished to pH 6.5–7.5, COD under 100 mg/l and BOD under 30 mg/l before reuse |
In the sample, power and fuel is 5.6% of sales, because the incineration boiler supplies most of the steam.
Licences and approvals for a molasses distillery
Alcohol is regulated by both the state and the centre, so approvals take longer here than in most chemical plants. Start the excise and environmental clearance work before you order machinery.
| Distillery licence | From the State Excise department, with bonded storage and movement permits for spirit and ethanol |
|---|---|
| Environmental clearance | Under the EIA Notification 2006, from MoEFCC or the state authority depending on the category, before construction starts |
| Pollution board consent | Consent to establish and consent to operate from the State Pollution Control Board, with the ZLD scheme approved |
| Ethanol storage | Ethyl alcohol is listed by PESO as needing a licence under the Petroleum Rules 2002 |
| Product standard | IS 15464:2022 for anhydrous ethanol used to blend with petrol |
| GST | 5% on ethyl alcohol supplied to oil companies for blending, and 5% on molasses, under Notification 9/2025-Integrated Tax (Rate) |
| Factory and boiler | Factory licence, boiler registration for the incineration boiler, and fire NOC; rules vary by state |
Market for molasses ethanol in India
Oil marketing companies are the main buyers, through tenders and supply allocations under the Ethanol Blended Petrol Programme. India averaged 20% blending in ESY 2025-26 (November to June), as reported in Parliament in July 2026, after about 14.6% in ESY 2023-24.
Industrial grades find steady buyers too, which gives a distillery a second outlet when OMC allocations are tight.
- Public sector oil marketing companies, for petrol blending
- Makers of ethyl acetate and other ethanol-based chemicals
- Pharmaceutical and hand sanitiser manufacturers
- Paint, ink and coating producers
- Licensed alcohol traders and distributors
Grain distilleries now compete for the same tenders: maize supplied about 37% of blending ethanol in ESY 2025-26, up from nothing in ESY 2021-22. A molasses unit holds its place through low-cost feedstock from nearby mills and steady operating days.
Mistakes that weaken an ethanol from molasses project report
- Using a B-heavy yield with C-heavy molasses
The gap is about 80 litres per tonne, so the cost per litre and DSCR come out far too good.
- Assuming molasses all year at one price
Mills sell during the crushing season. The report needs off-season storage, its working capital and a price range for the year.
- Treating ZLD as an add-on
If the evaporator or incineration boiler is down, spent wash storage fills in days and distillation has to stop.
- Counting GST and freight in the ethanol price
The OMC price is fixed before GST and transport, so revenue must start from the ex-distillery figure.
- No supply agreement behind the sales line
Lenders such as IREDA ask for a long-term supply agreement with oil companies that runs longer than the loan.
How NPCS helps you plan a molasses ethanol plant
- Capacity and feedstock planSize the distillery to the molasses you can secure, with B-heavy and C-heavy cases.
- Process and ZLD layoutFermentation, distillation, dehydration and spent wash route matched to CPCB norms.
- Bank-ready project reportProjections, DSCR, sensitivity to molasses price and the format your lender asks for.
- Approvals roadmapExcise, environmental clearance, consent, PESO and boiler approvals in the right order for your state.
NPCS's published client list records 269 specialty chemicals assignments, and the NPCS project team has prepared distillery and chemical plant reports since 1994.
What's inside the ethanol from molasses sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
19 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS ethanol from molasses project reports
These are ethanol from molasses project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Ethanol (Non-Grain / Molasses-Based) | Ethanol: 35 KLPD | ₹0 lakh | 9% | 58% | Get this report |
| Sugar Mill with Bio-Ethanol from Molasses | Sugar 2500 MT/Day, Molasses By Product 5556 MT/Day, Bio-Ethanol 30 KLs /Day | ₹136 crore | 46% | 55% | Get this report |
| Ethanol From Molasses | 40670 Gallons/Day | ₹164 crore | 28% | 57% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Ethanol from Molasses project report: frequently asked questions
How much does an ethanol from molasses plant cost in India?
Cost depends mainly on capacity and whether the distillery sits beside a sugar mill. Pre-feasibility filings show about ₹0.9–1.3 crore per KL per day of capacity, so a 60 KL per day unit runs to roughly ₹54–78 crore. These are indicative figures. Our sample report models a 10 KL per day unit at ₹963.97 lakh.
How much ethanol do you get from one tonne of molasses?
It depends on the molasses grade. A distillery pre-feasibility report filed for environmental clearance takes about 240 litres per tonne of C-heavy molasses and about 320 litres per tonne of B-heavy molasses. B-heavy molasses carries more sugar because less is crystallised out at the mill. Test fermentable sugar on every lot, because yield drives your cost per litre.
What price do oil companies pay for molasses ethanol?
The Government fixes ethanol prices by feedstock for each ethanol supply year. For ESY 2024-25 the price of ethanol from C-heavy molasses was set at ₹57.97 per litre, with GST and transport paid separately. Check the price notified for the current supply year before you build a revenue line. Our sample uses ₹59,300 per KL.
Is a molasses ethanol distillery profitable?
It can be when molasses is secure and the ZLD system runs reliably. In our illustrative sample, a 10 KL per day unit earns an 18% return on investment in Year 3. It breaks even at 38% of capacity and pays back in about 4 years. Real results depend on molasses price, operating days and incineration boiler uptime.
What licences are needed for an ethanol from molasses plant?
You need a distillery licence from the State Excise department and environmental clearance under the EIA Notification 2006. Add consent to establish and operate from the State Pollution Control Board, a PESO licence for ethanol storage, and factory and fire approvals. Fuel ethanol must meet IS 15464:2022. Rules differ by state, so confirm them for your site.
Which loans support a molasses based ethanol plant?
Banks and IREDA finance ethanol distilleries. IREDA's ethanol scheme covers B-heavy and C-heavy molasses, with up to 10 years repayment and an average DSCR above 1.20, and asks for long-term supply agreements with oil companies. The 2020 interest subvention scheme also covered molasses distilleries with ZLD; check whether any application window is open.
Is the ethanol from molasses project report PDF free, and can I use it for a loan?
The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report. Its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your capacity, molasses source, location and lender.
Sources and references
- Revision of ethanol price for supply to public sector OMCs for ESY 2024-25Press Information Bureau, Government of India, checked Oct 2026
- Lok Sabha Unstarred Question No. 892: Ethanol blending (23 July 2026)Ministry of Petroleum and Natural Gas, Lok Sabha, checked Oct 2026
- Charter for water recycling and pollution prevention in distilleriesCentral Pollution Control Board, checked Oct 2026
- IS 15464:2022 Anhydrous ethanol for use as blending component in motor gasolineBureau of Indian Standards, checked Oct 2026
- Notification No. 9/2025-Integrated Tax (Rate)Central Board of Indirect Taxes and Customs, checked Oct 2026
- List of petroleum and substances requiring licencePetroleum and Explosives Safety Organisation, checked Oct 2026
- Cabinet approves modified scheme to enhance ethanol distillation capacityPress Information Bureau, Government of India, checked Oct 2026
- IREDA ethanol financing schemeIndian Renewable Energy Development Agency, checked Oct 2026
- Pre-feasibility report: molasses distillery expansion to 240 KL per dayMinistry of Environment, Forest and Climate Change (environmental clearance portal), checked Oct 2026
- EIA executive summary: 60 KL per day molasses and cane juice distilleryMaharashtra Pollution Control Board, checked Oct 2026
