WhatsApp us
Request a Quote

Project reports in Specialty Chemicals

EDTA and its Salts Plant Project Report

Plant cost, process route, machinery, raw materials and five-year profitability for an EDTA and its salts plant, with a free sample report PDF you can open now.

Plant capacity
5.5 MT per day
Total project cost
₹1,043 lakh
Plant and machinery
₹537 lakh
Return on investment
21% (Year 3)
Break-even
38% of capacity
Payback period
About 3.7 years

Figures from our illustrative sample report for a typical unit. They show the format of an NPCS report and are not quotes for your project.

What is a edta and its salts project report?

An EDTA and its salts project report is a detailed project report (DPR) for a plant making EDTA and its sodium salts from ethylenediamine, sodium cyanide and formaldehyde. It covers the process, machinery, raw materials, cyanide safety, approvals, project cost, five-year projections, DSCR and break-even that a lender or investor checks.

Chemical entrepreneurs and existing detergent or micronutrient makers use it to size the plant and raise a term loan; banks use it to judge whether the project can repay.

Also known as: EDTA manufacturing plant project report, tetrasodium EDTA plant report, EDTA and its salts business plan, DPR for EDTA manufacturing.

EDTA and its salts manufacturing plant cost in India

Our sample report models a 5.5 MT per day plant that makes EDTA acid, disodium EDTA and tetrasodium EDTA, running 330 days a year. It starts at 60% of capacity, reaches 80% in Year 5 and sells at an average of ₹1,59,000 per MT before GST.

₹1,043 lakhTotal project cost
₹2,020 lakhSales in Year 3
₹218 lakhNet profit in Year 3
1.77Average DSCR
Cost of project (₹ lakh)
Land and site development99.86
Building and civil works217.47
Plant and machinery536.57
Other fixed assets60.63
Contingencies37.70
Preliminary and pre-operative23.81
Working capital margin67.16
Total1,043.20
Means of finance (₹ lakh)
Promoter's contribution (25%)260.80
Term loan from bank (75%)782.40
Cash credit limit (separate)201.47
Total project cost1,043.20

Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. The lowest DSCR is 1.54, in Year 2. All figures are illustrative.

EDTA manufacturing process, step by step

Most EDTA is made by the alkaline cyanide route. Each of the four hydrogen atoms on the nitrogens of ethylenediamine is replaced by a carboxymethyl group. Tetrasodium EDTA forms first; the acid and the disodium salt are made from it.

  1. Charging the reactor

    Ethylenediamine and caustic soda lye go into a stainless steel reactor and are heated.

  2. Carboxymethylation

    Sodium cyanide solution and formaldehyde are dosed slowly into the hot mix. Dosing rate and temperature decide how much by-product forms.

  3. Ammonia stripping

    Each mole of cyanide that reacts releases ammonia. Steam strips it out and an absorber recovers it as ammonia water.

  4. Purifying the liquid

    The tetrasodium EDTA solution is treated with activated carbon and filtered. Some is sold as a 40% liquid.

  5. Acidification

    Sulphuric acid lowers the pH until EDTA acid, which barely dissolves in water, settles out as a white solid.

  6. Centrifuging and washing

    A centrifuge separates the acid, and washing removes the sodium sulphate formed during acidification.

  7. Making disodium EDTA

    Part of the wet acid is neutralised with measured caustic soda, then crystallised as disodium EDTA.

  8. Drying and packing

    Acid and disodium salt are dried, sieved and packed in lined HDPE bags or fibre drums.

Which process route suits an EDTA plant?

The one-step alkaline cyanide route, used in our sample, is the simplest to build and runs in ordinary stainless steel vessels. Its drawback is purity: a little nitrilotriacetic acid (NTA) forms as a side product, which matters to cosmetic and pharma buyers.

The two-step route first makes ethylenediamine tetraacetonitrile in a separate stage, isolates it, and then hydrolyses it with caustic soda. It needs more equipment but gives a cleaner product with less NTA.

The chloroacetic acid route avoids cyanide on site by reacting ethylenediamine with monochloroacetic acid. The product carries sodium chloride that has to be washed out, and raw material cost per tonne is higher, so it suits small batches rather than a dedicated plant.

A fourth option is a salts unit that buys EDTA acid and converts it to disodium or tetrasodium salt. It needs no cyanide handling or ammonia recovery, but its margin depends entirely on the price of the acid it buys.

Decide the grades first: if you plan to sell to cosmetic or pharmaceutical makers, choose the route and the quality laboratory for that purity at the start. Upgrading a technical-grade plant later costs more than building for it.

Raw materials for EDTA and its salts

Sodium cyanide is the largest cost in our sample, at half of the raw material bill. It comes as solid briquettes in sealed drums or as solution in tankers, and its store is the most closely inspected part of the plant. Raw materials take 55.2% of sales in Year 3, so a 10% rise in sodium cyanide price lifts raw material cost by about 5%.

Raw materialShare of costYear 3 (₹ lakh)
Sodium cyanide50%557.32
Ethylenediamine24%267.52
Formaldehyde solution15%167.20
Caustic soda lye7%78.02
Sulphuric acid4%44.59
Total100%1,114.65

Machinery for an EDTA plant

The reaction vessels are the biggest machinery item in our sample. Next come ammonia recovery and the cyanide effluent plant, which together cost ₹144.87 lakh, about 27% of the machinery bill.

MachineWhat it doesSample cost (₹ lakh)
SS 316 reaction vessels with agitatorsCarry out the cyanide reaction and salt conversion139.51
Ammonia stripping and recovery systemRemoves and recovers ammonia from the reaction mass75.12
Acidification and crystallisation vesselsPrecipitate EDTA acid and crystallise disodium EDTA53.66
CentrifugesSeparate and wash the solids48.29
Fluid bed dryer and pulveriserDry and size the powder grades53.66
Sodium cyanide dissolving and dosing systemMakes up and meters cyanide solution in a closed system32.19
Cyanide destruction effluent plant and scrubbersDestroys residual cyanide and cleans vent gases69.75
Boiler, cooling tower and chillerSteam for stripping and drying, cooling for crystallisation42.93
Bagging and drum filling equipmentPacks powder in bags and liquid in drums21.46
Total plant and machinery536.57

Costs are the sample report's estimates for a 5.5 MT per day plant. Get current quotations before you finalise.

Manpower and utilities for an EDTA plant

The sample plant employs 43 people to run the reactors, centrifuges and dryer round the clock. Its laboratory tests every batch for assay, iron and chloride. Power and fuel cost ₹119.59 lakh in Year 3, about 5.9% of sales. Besides power, the main utility load is steam for ammonia stripping and drying.

CategoryNumberMonthly wage (₹)Year 1 (₹ lakh)
Management, supervision and administration632,50023.40
Skilled workers and operators1520,50036.90
Semi-skilled and unskilled workers2213,50035.64
Total4395.94

Wages rise by 5% a year in the sample. Chemists and operators trained in cyanide handling are hard to find outside chemical clusters.

Licences and approvals for an EDTA plant

An EDTA plant handles a toxic raw material and discharges process effluent, so approvals take longer than for most chemical units. Start them before you order machinery.

Environmental clearanceSynthetic organic chemical units are listed under item 5(f) of the EIA Notification, 2006, so prior environmental clearance is needed. Whether the state or the centre appraises it depends on the site's location.
Pollution board consentOrganic chemicals manufacturing is in the CPCB red category. Consent to establish and operate comes from the State Pollution Control Board, with limits on cyanide in treated effluent.
Hazardous chemicalsSodium cyanide, ethylenediamine and formaldehyde are listed under the Manufacture, Storage and Import of Hazardous Chemical Rules, 1989. Formaldehyde is also in Schedule 3, so larger stocks bring notification and on-site emergency plan duties.
Product standardIS 7220:1974 covers EDTA acid, pure and technical grades. BIS reaffirmed it in October 2024.
Factory and fireFactory licence from the state factories department and fire NOC for the chemical store and plant building
Business registrationUdyam (MSME) registration and GST registration

Who buys EDTA and its salts in India?

EDTA binds calcium, magnesium and metal ions so they stop interfering with a process. That one property creates demand across detergents, water treatment, textiles, farm inputs and personal care. Each buyer wants a different form: tetrasodium liquid for cleaners, disodium powder for cosmetics, and the acid for making metal chelates.

  • Detergent and household cleaner manufacturers
  • Water treatment and boiler chemical formulators
  • Makers of chelated zinc and iron micronutrients
  • Textile processing and dye houses
  • Cosmetic, pharmaceutical and laboratory chemical makers
  • Chemical traders and exporters

Where a new plant wins: import offers set the price Indian buyers compare against. A local plant competes on steady assay, low iron and chloride, and delivery in days instead of weeks, and buyers who approve a sample tend to reorder regularly.

Mistakes that weaken an EDTA and its salts project report

  • Pricing everything at pure-grade rates

    Online listings run from technical grade to analytical reagent prices many times higher. Revenue must use the bulk technical and disodium rates your actual buyers pay.

  • Leaving out cyanide effluent treatment

    Cyanide destruction, scrubbers and their chemicals are a real capital and running cost. A report without them will not pass a pollution board or a lender's technical review.

  • Ignoring ammonia and sodium sulphate

    Every tonne of EDTA releases ammonia and, when acidified, sodium sulphate. The report should show how each is recovered, sold or disposed of, and at what cost.

  • Planning one grade only

    A plant that makes only EDTA acid depends on a few chelate makers. Splitting output across liquid, acid and disodium grades spreads the risk.

How NPCS helps you set up an EDTA plant

  • Route and grade mixCompare the cyanide, two-step and salts-only options against the grades your buyers want.
  • Plant and effluent sizingSize reactors, ammonia recovery and the cyanide effluent plant for your capacity.
  • Bank-ready project reportProjections, DSCR, working capital and sensitivity to cyanide prices in your lender's format.
  • Approvals roadmapEnvironmental clearance, red category consent and hazardous chemical compliance for your state.

NPCS's client list includes 269 project assignments in specialty chemicals, and the team has prepared project reports and feasibility studies for chemical plants since 1994.

What's inside the edta and its salts sample report

  1. Introduction
  2. Uses and applications
  3. Market potential
  4. Manufacturing process
  5. Raw materials
  6. Plant and machinery
  7. Land, building and utilities
  8. Manpower
  9. Licences and approvals
  10. Project cost and means of finance
  11. Working capital
  12. Projected profitability
  13. Cash flow statement
  14. Projected balance sheet
  15. Depreciation
  16. Term loan repayment
  17. Debt service coverage
  18. Break-even analysis
  19. Financial ratios
  20. Key assumptions
  21. Conclusion
  22. Monthly loan repayment schedule

19 pages, five-year projections, illustrative figures.

Open sample report

Free sample or a report for your project?

What you getFree sampleNPCS report for your project
Capacity and locationTypical unitYour capacity, site and state
FiguresIllustrativeBuilt on current prices and quotations
Machinery suppliers and quotationsNoYes
Market survey for your regionNoYes
Bank or scheme format (PMEGP, term loan)NoYes
Use for a loan applicationNoYes

Real NPCS edta and its salts project reports

These are edta and its salts project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.

Project reportPlant capacityTotal investmentRate of returnBreak-evenAction
Edta AND ITS Salts1036 Kg./ Day₹1.71 crore48%34% Get this report

Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.

Find other projects that fit your budget Search NPCS project profiles by investment, return and break-even, the same search as our Startup Selector.

What clients say about NPCS

4.7

264 Google reviews, as of 20 Oct 2026

Clients most often mention

  • feasibility reports 18
  • project report 16
  • helpful for startups 15
  • detailed reports 8
Read all reviews on Google
  • Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.

    Piyush Singh, Google review, 2026

  • Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended

    Saroj Yadav, Google review, 2026 View on Google

  • In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.

    Shrishti Gautam, Google review, 2026

  • NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.

    Raj Yadav, Google review, 2026

EDTA and its Salts project report: frequently asked questions

How much does it cost to set up an EDTA plant in India?

Our sample report models a 5.5 MT per day plant making EDTA acid, disodium EDTA and tetrasodium EDTA at ₹1,043 lakh, including land, building, machinery and working capital margin. Plant and machinery is ₹537 lakh of that. A smaller unit that only converts bought EDTA acid into salts costs far less, because it needs no cyanide section or ammonia recovery.

What raw materials are used to make EDTA?

EDTA is made from ethylenediamine, sodium cyanide and formaldehyde in caustic soda solution, with sulphuric acid used to precipitate the free acid. In our sample report sodium cyanide is half of raw material cost and ethylenediamine about a quarter. Raw materials together take 55.2% of sales, so their prices decide most of the margin.

How is EDTA manufactured?

Ethylenediamine is reacted with formaldehyde and sodium cyanide in hot caustic solution, which gives tetrasodium EDTA and releases ammonia. The ammonia is stripped off and recovered. The solution is purified and sold as liquid, or acidified with sulphuric acid to precipitate EDTA acid, which is washed, dried and partly converted to disodium EDTA.

Is EDTA manufacturing profitable?

In our illustrative sample, a 5.5 MT per day plant earns a 21% return on investment in Year 3. It breaks even at about 38% of capacity and pays back in about 3.7 years. Real profit depends on sodium cyanide and ethylenediamine prices, the grade mix you sell, effluent treatment cost and the credit your buyers expect.

What licences does an EDTA plant need?

Beyond Udyam, GST, a factory licence and fire NOC, an EDTA plant needs prior environmental clearance under the EIA Notification, 2006. It also needs red category consent from the State Pollution Control Board. Sodium cyanide, formaldehyde and ethylenediamine bring duties under the Hazardous Chemical Rules, 1989. IS 7220 is the BIS reference for EDTA acid.

What is the difference between EDTA acid, disodium EDTA and tetrasodium EDTA?

They are the same chelating molecule in different forms. EDTA acid is a white powder that hardly dissolves in water. Disodium EDTA is partly neutralised, dissolves well and suits cosmetics, pharma and laboratories. Tetrasodium EDTA is fully neutralised, strongly alkaline and sold as powder or a 40% solution for detergents, cleaners and water treatment.

Is the sample report free and can I use it for a loan?

The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report; its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and loan scheme.

Sources and references

  1. IS 7220:1974 Specification for ethylenediaminetetra-acetic acid, pure and technicalBureau of Indian Standards, checked Oct 2026
  2. The Manufacture, Storage and Import of Hazardous Chemical Rules, 1989Punjab Pollution Control Board, checked Oct 2026
  3. Red category industries (CPCB list)State Pollution Control Board, Odisha, checked Oct 2026
  4. Revised categorisation of industries (R/O/G/W/B), including CPCB directions of 12 February 2025Maharashtra Pollution Control Board, checked Oct 2026
  5. MoEFCC letter on appraisal of item 5(f) synthetic organic chemicals projects, 4 February 2019Ministry of Environment, Forest and Climate Change (published by SEIAA Puducherry), checked Oct 2026
  6. Final screening assessment for EDTA and its salts groupEnvironment and Climate Change Canada and Health Canada, checked Oct 2026
Ajay Kumar Gupta, founder of NPCS

Who prepares NPCS reports

The NPCS project team, led by Ajay Kumar Gupta

This page and its sample report are prepared and reviewed by the NPCS project team, which has written techno-economic feasibility studies and detailed project reports since 1994.

Ajay Kumar Gupta founded Niir Project Consultancy Services (NPCS) and leads the organisation. With 40 years of experience in MSME project consulting, he has built the team that has delivered more than 28,000 project reports for clients worldwide, helping entrepreneurs plan and finance profitable manufacturing businesses.

Ajay Kumar Gupta on LinkedIn

Published
Last updated
Next review
Oct 2027
Reviewed by
NPCS project team

This page is reviewed every 12 months, or sooner when scheme limits, GST rates, BIS rules or pollution categories change. The sample report is illustrative: its figures are generated from industry-typical ratios for a unit of this size, checked so every statement balances, and are not taken from any client project.

Planning a different specialty chemicals project?

These are a few of the projects we advise on. NPCS's published client list records 269 specialty chemicals assignments, so tell us what you are planning.

Tell us your project

Recent specialty chemicals assignments

  • Iiconnic Apparels
    Comprehensive Project Report on SilicaPaurri Garhwal, 2026
  • Parul Industries
    Project Feasibility Report on Nicotine for industrial applicationsValsad, 2026
  • Rich Phytocare Private Limited
    Industrial Project Report on Potassium SchoeniteBodinayakanur, 2026
  • Lakshya Powertech Ltd
    Techno-Economic Project Study on Acoustic PanelsMumbai, 2026
  • Luxury Line Interiors & Furniture
    Project Feasibility Report on Precipitated Silica & Activated Carbon for Industrial ApplicHyderabad, 2026
  • Indian Potash Limited
    Techno-Economic Feasibility Report on Citric AcidCoimbatore, 2026
  • Cecilia Still
    Detailed Project Report on Tall Oil RosinsEurope, 2026
  • Taraka Pamidi
    Technical and Financial Feasibility Report on Silica-, 2025

Get a edta and its salts project report for your plant

Tell us your planned capacity, location and loan scheme. Our team will confirm the scope and price of a report built on current machinery quotations and raw material prices for your region.

Reports are prepared in the format banks and PMEGP offices ask for, with five-year projections, DSCR and break-even.

Request a EDTA and its Salts Project Report

Share your plan and our team will call you back within 24 hours.

Start with the sample, then plan your own unit

Open the free edta and its salts sample report to see the format, then talk to NPCS about a report for your capacity and location.

Sample PDF WhatsApp
EDTA and its Salts sample project report (illustrative) Download New tab

Illustrative sample. Figures are representative and not from a real project.

Call Us WhatsApp