WhatsApp us
Request a Quote

Project reports in Specialty Chemicals

Dicalcium Phosphate Dentifrice Grade Plant Project Report

Plant cost, machinery, raw materials and five-year profitability for a toothpaste-grade DCP plant, with a free sample project report PDF you can open now.

Plant capacity
8.6 MT per day
Total project cost
₹1,090 lakh
Plant and machinery
₹547 lakh
Return on investment
13% (Year 3)
Break-even
46% of capacity
Payback period
About 4.7 years

Figures from our illustrative sample report for a typical unit. They show the format of an NPCS report and are not quotes for your project.

What is a dicalcium phosphate dentifrice grade project report?

A dicalcium phosphate dentifrice grade project report is a detailed project report (DPR) for a plant that reacts purified phosphoric acid with lime to make the fine, white dihydrate powder used as the polishing agent in toothpaste. It covers process, machinery, raw materials, market, project cost, finance, projections, DSCR and break-even.

Investors and chemical companies use it to size the plant and raise a term loan; lenders and toothpaste buyers use it to judge whether the unit can supply consistent quality and repay.

Also known as: DCP dihydrate for toothpaste project report, calcium hydrogen phosphate dihydrate plant DPR, dental grade DCP business plan, toothpaste grade dicalcium phosphate plant report.

Dicalcium phosphate dentifrice grade plant cost and economics

The sample report models a plant of 8.6 metric tonnes per day (MT per day) running 330 days a year, or 2,838 MT per year at full capacity. It starts at 60% utilisation and reaches 80% in Year 5, selling at ₹1,03,000 per MT ex-factory.

Plant and machinery is half the project cost because the plant needs lined reactors, a filter press, a dryer and fine milling, not just mixing equipment. The debt service coverage ratio (DSCR) is cash available for repayment divided by the instalment. It averages 1.37, with a low of 1.20 in Year 2 when principal repayment starts.

₹1,090 lakhTotal project cost
₹2,046 lakhSales in Year 3
₹144 lakhNet profit in Year 3
1.37Average DSCR
Cost of project (₹ lakh)
Land and site development103.73
Building and civil works247.94
Plant and machinery547.09
Other fixed assets57.77
Contingencies39.75
Preliminary and pre-operative24.91
Working capital margin69.05
Total1,090.24
Means of finance (₹ lakh)
Promoter's contribution (25%)272.56
Term loan from bank (75%)817.68
Cash credit limit (separate)207.14
Total project cost1,090.24

Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.

Dicalcium phosphate dentifrice grade manufacturing process

Dentifrice grade DCP is a precipitation product. Most of the skill lies in holding pH and temperature so the dihydrate crystal forms, then drying it without driving off its water of crystallisation.

  1. Acid dilution

    Purified phosphoric acid is diluted with demineralised water in lined tanks, because iron and hardness in ordinary water lower whiteness.

  2. Lime slurry preparation

    High-purity hydrated lime is slaked into a slurry and screened, since grit left in the lime would scratch enamel and fail abrasivity tests.

  3. Precipitation

    Lime slurry is fed into the acid under agitation at a slightly acidic pH and low temperature; at higher temperatures the anhydrous form grows instead.

  4. Stabilisation

    Tetrasodium pyrophosphate is added to the slurry so the crystals resist slow hydrolysis that would harden toothpaste and bind its fluoride.

  5. Filtration and washing

    A filter press separates the solid and washes out soluble salts that affect taste and pH in the finished paste.

  6. Low-temperature drying

    A flash dryer removes free moisture at a controlled outlet temperature, leaving about 21% bound water in the dihydrate.

  7. Milling and classification

    A pulveriser and air classifier bring the powder to the fine, narrow particle size range that sets polishing power and mouthfeel.

  8. Blending, testing and packing

    Trimagnesium phosphate is blended in, each lot is tested for whiteness, particle size, pH and heavy metals, and packed in lined bags.

Which DCP process route suits toothpaste grade?

Dicalcium phosphate can be made by several routes, but only one gives the purity and whiteness toothpaste makers accept. The choice decides your raw material cost and who you can sell to.

Purified phosphoric acid and limeThe usual route for dentifrice and pharma grade. Higher acid cost, but low fluoride, iron and heavy metals and a consistent white crystal. This is the route in our sample report.
Rock phosphate and hydrochloric acidCommon for feed grade DCP. Cheaper input, but impurities from the rock carry through, so the product rarely meets toothpaste whiteness and heavy metal limits.
Upgrading feed or technical gradeRe-dissolving and re-precipitating a lower grade adds a second reaction and filtration stage; it suits a plant that already makes feed DCP.
Anhydrous versus dihydrateAnhydrous DCP is harder and more abrasive, so toothpaste makers use it only in small amounts. The dihydrate is the main polishing base, which is why drying temperature matters.

Raw materials for dentifrice grade DCP

Raw materials take 60% of sales in our sample report, and phosphoric acid alone is about three quarters of that. Each tonne of dihydrate needs a little over half a tonne of phosphoric acid on a 100% basis, so a rise in acid price feeds almost straight into cost.

Raw materialShare of costYear 3 (₹ lakh)
Purified phosphoric acid76%933.14
High-purity hydrated lime16%196.45
Stabilisers (tetrasodium pyrophosphate, trimagnesium phosphate)8%98.23
Total100%1,227.82

Buy acid and lime against a written specification for iron, fluoride and heavy metals; a cheap lot can spoil a whole batch.

Machinery for a toothpaste grade DCP plant

Contact parts must resist phosphoric acid and must not shed iron into the product, so reactors, pipes and filter plates are usually stainless steel, rubber-lined or polypropylene.

MachineWhat it doesSample cost (₹ lakh)
Agitated precipitation reactors with pH controlReact acid and lime to form the dihydrate109.42
Flash dryer with hot air generatorRemoves free moisture at low temperature98.48
Filter press with cake washingSeparates and washes the precipitate71.12
Pulveriser with air classifierMills to the specified particle size71.12
Lime slaking and slurry classification systemMakes a grit-free lime slurry49.24
Acid storage and dilution tanksStore and dilute phosphoric acid43.77
Bag filter, pneumatic conveying and baggingRecovers fines and packs the powder43.77
Stabiliser blenderMixes in trimagnesium phosphate evenly32.82
Quality control laboratoryWhiteness, particle size, pH and metals tests27.35
Total plant and machinery547.09

Costs are the sample report's estimates for an 8.6 MT per day plant. Get current quotations before you finalise.

Utilities and manpower for the plant

The dryer is the main energy user, and the plant needs a steady supply of demineralised water for dilution, slurry making and cake washing.

Power and fuel₹112.09 lakh in Year 3, or 5.5% of sales, mostly for the hot air generator, milling and agitators
WaterDemineralised water for the process and cake washing; wash water carries dissolved phosphate and needs treatment before reuse or discharge
Manpower47 people: 7 in management and supervision, 16 skilled operators and 24 semi-skilled and unskilled workers
Wage bill₹105.54 lakh in Year 1, rising 5% a year
Laboratory staffA chemist on each shift to test pH during precipitation and release each lot before dispatch

Standards and approvals for a dentifrice grade DCP plant

Product standardIS 1767:1980, the BIS specification for dicalcium phosphate for dentifrice, is the quality reference; buyers add their own limits in the contract
Pollution board consentConsent to establish and operate from the State Pollution Control Board; phosphorus and its compounds appear in the Red category list, so expect Red category conditions
Business registrationUdyam registration where eligible, and GST registration
Factory licenceUnder the Factories Act, with plan approval for the building; rules vary by state
Fire and safetyFire NOC and safe storage and handling of phosphoric acid

Checked October 2026. Confirm the pollution category and conditions with your state board before you buy land.

Who buys dentifrice grade dicalcium phosphate?

Demand comes from toothpaste and tooth powder makers. Large oral care brands, regional brands, herbal and private-label producers and contract fillers all use DCP dihydrate as a polishing base, often alongside calcium carbonate or silica.

Imported dihydrate competes for the same buyers, so a domestic plant wins on shorter lead times, smaller lots and quick technical support during trials.

  • Oral care and toothpaste brand owners
  • Contract toothpaste manufacturers
  • Tooth powder and herbal toothpaste makers
  • Private-label suppliers to retail chains
  • Chemical distributors serving personal-care makers
  • Export customers

Plan for the approval gap: a toothpaste maker runs lab, pilot and shelf-life trials on your powder before it places a regular order. Budget several months of lower sales and keep sample lots ready from the first batch.

Mistakes that weaken a dicalcium phosphate dentifrice grade project report

  • Pricing it like feed grade

    Feed grade DCP sells on phosphorus content at a lower price. Using feed grade prices or feed grade raw materials gives the wrong revenue and the wrong cost.

  • No plan for stabilisation

    Without pyrophosphate and magnesium stabilisers the powder can fail buyers' shelf-life tests. The report must cost them and show where they enter the process.

  • Undersizing the dryer and mill

    Drying too hot strips the water of crystallisation, and a weak classifier gives coarse particles. Both turn saleable product into off-grade stock.

  • Ignoring buyer credit and trial time

    Trade receivables are the largest current asset in our sample. Projections that assume full sales from month one understate the working capital you need.

  • No phosphoric acid price test

    Acid is 76% of raw material cost in our sample. Lenders expect a sensitivity case showing DSCR if acid rises 10%.

How NPCS helps you set up a dentifrice grade DCP plant

  • Capacity and grade planSize the plant and decide between dihydrate only or a mix with anhydrous and pharma grades.
  • Process and machineryCompare reactor, filter, dryer and classifier options and collect supplier quotations.
  • Bank-ready project reportProjections, DSCR, acid price sensitivity and working capital in the format your lender wants.
  • Approvals and layoutPlant layout, water and effluent planning and the approvals list for your state.

NPCS's published client list shows 269 assignments in specialty chemicals, and the NPCS project team has prepared project reports and feasibility studies since 1994.

What's inside the dicalcium phosphate dentifrice grade sample report

  1. Introduction
  2. Uses and applications
  3. Market potential
  4. Manufacturing process
  5. Raw materials
  6. Plant and machinery
  7. Land, building and utilities
  8. Manpower
  9. Licences and approvals
  10. Project cost and means of finance
  11. Working capital
  12. Projected profitability
  13. Cash flow statement
  14. Projected balance sheet
  15. Depreciation
  16. Term loan repayment
  17. Debt service coverage
  18. Break-even analysis
  19. Financial ratios
  20. Key assumptions
  21. Conclusion
  22. Monthly loan repayment schedule

19 pages, five-year projections, illustrative figures.

Open sample report

Free sample or a report for your project?

What you getFree sampleNPCS report for your project
Capacity and locationTypical unitYour capacity, site and state
FiguresIllustrativeBuilt on current prices and quotations
Machinery suppliers and quotationsNoYes
Market survey for your regionNoYes
Bank or scheme format (PMEGP, term loan)NoYes
Use for a loan applicationNoYes

Real NPCS dicalcium phosphate dentifrice grade project reports

These are dicalcium phosphate dentifrice grade project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.

Project reportPlant capacityTotal investmentRate of returnBreak-evenAction
Dicalcium Phosphate (DENTIFRICE GRADE)3000 MT/Year₹13.6 crore43%32% Get this report

Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.

Find other projects that fit your budget Search NPCS project profiles by investment, return and break-even, the same search as our Startup Selector.

What clients say about NPCS

4.7

264 Google reviews, as of 20 Oct 2026

Clients most often mention

  • feasibility reports 18
  • project report 16
  • helpful for startups 15
  • detailed reports 8
Read all reviews on Google
  • Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.

    Piyush Singh, Google review, 2026

  • Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended

    Saroj Yadav, Google review, 2026 View on Google

  • In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.

    Shrishti Gautam, Google review, 2026

  • NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.

    Raj Yadav, Google review, 2026

Dicalcium Phosphate Dentifrice Grade project report: frequently asked questions

What is the manufacturing plant cost for dicalcium phosphate dentifrice grade in India?

Our sample report models an 8.6 MT per day plant at a total project cost of ₹1,090 lakh, of which plant and machinery is ₹547 lakh. As an indicative guide, a 4–5 MT per day unit may need about ₹6–8 crore. Land, building, dryer size and the quality lab move the figure most, so a project report works it out for your site.

What raw materials are used to make dentifrice grade dicalcium phosphate?

Purified phosphoric acid and high-purity hydrated lime are the main inputs, with small amounts of stabilisers such as tetrasodium pyrophosphate and trimagnesium phosphate. In our sample report phosphoric acid is 76% of raw material cost, so its purity and price decide both product quality and profit. Process water must also be low in iron and hardness.

How is dentifrice grade DCP different from feed grade DCP?

Feed grade DCP is usually made from rock phosphate and hydrochloric acid and is sold on phosphorus content. Dentifrice grade is the dihydrate made from purified acid and lime, then stabilised, dried at low temperature and milled fine. Toothpaste makers check whiteness, particle size, abrasivity, fluoride compatibility and heavy metals, so the two grades need different plants and controls.

Why is dicalcium phosphate used in toothpaste?

Dicalcium phosphate dihydrate is a mild abrasive that removes stains and plaque without wearing enamel, and it gives toothpaste a smooth, white body. It suits fluoride toothpastes made with sodium monofluorophosphate. It must be stabilised during manufacture, otherwise the paste can harden in the tube and lose soluble fluoride over its shelf life.

Is a dicalcium phosphate dentifrice grade plant profitable?

In our illustrative sample, the 8.6 MT per day plant earns a 13% return on investment in Year 3, breaks even at about 46% of capacity and pays back in about 4.7 years. Margins depend mostly on phosphoric acid prices, the selling price toothpaste makers accept after trials, and how quickly the plant gets buyer approvals.

Which BIS standard applies to dicalcium phosphate for toothpaste?

IS 1767:1980, the Indian Standard specification for dicalcium phosphate for dentifrice (second revision), is the reference, handled by the BIS cosmetics sectional committee PCD 19. Toothpaste makers often add their own limits for particle size, abrasivity and heavy metals in the supply contract, so plan your quality lab around both the standard and buyer specifications.

Is the sample report free and can I use it for a loan?

The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report; its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and financing plan.

Sources and references

  1. IS 1767:1980 Specification for dicalcium phosphate for dentifrice (Second Revision)Bureau of Indian Standards, checked Oct 2026
  2. Categorization of industrial sectors under Red as per CPCB criteriaState Pollution Control Board, Odisha, checked Oct 2026
Ajay Kumar Gupta, founder of NPCS

Who prepares NPCS reports

The NPCS project team, led by Ajay Kumar Gupta

This page and its sample report are prepared and reviewed by the NPCS project team, which has written techno-economic feasibility studies and detailed project reports since 1994.

Ajay Kumar Gupta founded Niir Project Consultancy Services (NPCS) and leads the organisation. With 40 years of experience in MSME project consulting, he has built the team that has delivered more than 28,000 project reports for clients worldwide, helping entrepreneurs plan and finance profitable manufacturing businesses.

Ajay Kumar Gupta on LinkedIn

Published
Last updated
Next review
Oct 2027
Reviewed by
NPCS project team

This page is reviewed every 12 months, or sooner when scheme limits, GST rates, BIS rules or pollution categories change. The sample report is illustrative: its figures are generated from industry-typical ratios for a unit of this size, checked so every statement balances, and are not taken from any client project.

Planning a different specialty chemicals project?

These are a few of the projects we advise on. NPCS's published client list records 269 specialty chemicals assignments, so tell us what you are planning.

Tell us your project

Recent specialty chemicals assignments

  • Iiconnic Apparels
    Comprehensive Project Report on SilicaPaurri Garhwal, 2026
  • Parul Industries
    Project Feasibility Report on Nicotine for industrial applicationsValsad, 2026
  • Rich Phytocare Private Limited
    Industrial Project Report on Potassium SchoeniteBodinayakanur, 2026
  • Lakshya Powertech Ltd
    Techno-Economic Project Study on Acoustic PanelsMumbai, 2026
  • Luxury Line Interiors & Furniture
    Project Feasibility Report on Precipitated Silica & Activated Carbon for Industrial ApplicHyderabad, 2026
  • Indian Potash Limited
    Techno-Economic Feasibility Report on Citric AcidCoimbatore, 2026
  • Cecilia Still
    Detailed Project Report on Tall Oil RosinsEurope, 2026
  • Taraka Pamidi
    Technical and Financial Feasibility Report on Silica-, 2025

Get a dicalcium phosphate dentifrice grade project report for your plant

Tell us your planned capacity, location and loan scheme. Our team will confirm the scope and price of a report built on current machinery quotations and raw material prices for your region.

Reports are prepared in the format banks and PMEGP offices ask for, with five-year projections, DSCR and break-even.

Request a Dicalcium Phosphate Dentifrice Grade Project Report

Share your plan and our team will call you back within 24 hours.

Start with the sample, then plan your own unit

Open the free dicalcium phosphate dentifrice grade sample report to see the format, then talk to NPCS about a report for your capacity and location.

Sample PDF WhatsApp
Dicalcium Phosphate Dentifrice Grade sample project report (illustrative) Download New tab

Illustrative sample. Figures are representative and not from a real project.

Call Us WhatsApp