What is a creosote oil project report?
A creosote oil project report is a detailed project report (DPR) for a plant that distils crude coal tar under vacuum and blends the creosote fraction into wood preservative oil. It sets out the process, equipment, tar supply, buyers, approvals, project cost, means of finance, five-year projections, DSCR and break-even that a lender or investor reviews.
Coke makers, chemical traders and investors use it to size a tar distillation unit and raise a term loan. Banks use it to judge whether the plant can repay.
Also known as: coal tar distillation project report, vacuum distillation of crude coal tar project report, creosote oil manufacturing plant DPR, creosote oil business plan.
Creosote oil manufacturing plant cost and economics
The sample report models a plant that turns out 14 metric tonnes of creosote oil per day, or 4,620 MT a year at full capacity over 330 working days. It starts at 60% utilisation and reaches 80% in Year 5, selling at ₹59,800 per MT.
| Land and site development | 63.28 |
|---|---|
| Building and civil works | 284.64 |
| Plant and machinery | 565.55 |
| Other fixed assets | 80.03 |
| Contingencies | 42.51 |
| Preliminary and pre-operative | 25.90 |
| Working capital margin | 62.51 |
| Total | 1,124.42 |
| Promoter's contribution (25%) | 281.10 |
|---|---|
| Term loan from bank (75%) | 843.32 |
| Cash credit limit (separate) | 187.54 |
| Total project cost | 1,124.42 |
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments; lowest DSCR in any year is 1.80. All figures are illustrative.
Creosote oil manufacturing process from crude coal tar
Creosote is the oil that boils off coal tar after the light oils and before pitch, over a continuous range starting at about 200°C. A vacuum still lets you collect it at lower temperatures, which cuts cracking and coke build-up in the heater.
- Tar receipt and settling
Crude tar from coke ovens is held in steam-heated tanks so free water and ammonia liquor separate and can be drained off.
- Dehydration
The tar is heated in a dehydration column to remove the last of the water and the light oil, which would otherwise cause foaming in the still.
- Heating in the tube still
Dry tar is pumped through a fired tube heater and brought to around 350°C in a short, controlled pass.
- Vacuum fractionation
The hot tar flashes into a vacuum column; naphthalene oil, wash oil, creosote and anthracene oil are drawn off at different trays and pitch leaves from the bottom.
- Cutting and blending
Creosote cuts are blended, with some anthracene oil where needed, to meet the distillation range and density the buyer specifies.
- Testing and dispatch
Each batch is checked for water, distillation range and specific gravity, then stored hot and loaded into tankers or drums.
Batch still or continuous vacuum distillation?
The choice of still sets your capital cost, fuel use and how consistent each creosote batch will be. Lenders ask why you chose one over the other.
| Batch pot still | Lowest capital and simplest to run. Cuts are taken by temperature as the batch heats, so quality drifts between batches and fuel use per tonne is higher. |
|---|---|
| Continuous atmospheric tube still | Steady feed and sharper cuts than a pot still. Higher temperatures are needed to lift the heavy oils, which raises the risk of cracking and heater fouling. |
| Continuous tube still with vacuum column | Heavy oils come off at lower temperature, so creosote and anthracene oil cuts are cleaner and the pitch can be held to a target softening point. Needs a vacuum system and more instrumentation. |
| What the sample assumes | A continuous unit with a dehydration column, fired tube still and vacuum fractionating column, sized for 14 MT per day of creosote. |
Raw materials for creosote oil
Crude coal tar is almost the whole raw material bill. It comes from by-product coke ovens at steel plants and from merchant coke makers. Water and ash content vary by source, so agree limits on both in the supply contract. In the sample, raw materials are 46% of sales.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Crude coal tar | 88% | 782.99 |
| Anthracene oil for blending | 6% | 53.39 |
| Caustic soda lye | 4% | 35.59 |
| Demulsifier and additives | 2% | 17.79 |
| Total | 100% | 889.76 |
Machinery for a coal tar distillation unit
The vacuum fractionating column is the largest single item in the sample, followed by the fired tube still. Tanks and lines carrying tar and pitch need steam or thermic fluid tracing so the material never sets inside them.
| Equipment | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Heated crude tar storage and settling tanks | Hold tar warm and separate free water | 67.87 |
| Tar dehydration column | Removes residual water and light oil | 62.21 |
| Fired tube still heater | Heats dry tar to distillation temperature | 101.80 |
| Vacuum fractionating column | Separates oil fractions from pitch | 124.42 |
| Condensers and fraction receivers | Cool and collect each oil cut | 56.56 |
| Vacuum system with steam ejectors | Holds the column under vacuum | 45.24 |
| Pitch cooling and handling system | Cools and solidifies bottom pitch | 45.24 |
| Product storage tanks and tanker loading | Store and dispatch finished oil | 39.59 |
| Quality control laboratory | Distillation, water and density tests | 22.62 |
| Total plant and machinery | 565.55 | |
Costs are the sample report's estimates. Get current quotations from process equipment suppliers before you finalise.
Manpower for a creosote oil plant
A continuous still runs round the clock, so the sample staffs three shifts with 45 people. Operators who can hold the vacuum and heater temperatures steady matter more than headcount. Wages rise 5% a year in the projections.
| Category | Number | Year 1 cost (₹ lakh) |
|---|---|---|
| Management, supervision and administration | 7 | 27.30 |
| Skilled workers and operators | 16 | 39.36 |
| Semi-skilled and unskilled workers | 22 | 35.64 |
| Total (Year 1) | 45 | 102.30 |
Licences and approvals for a coal tar distillation plant
Environmental approvals take the longest for this product. Start them before you order the still.
| Pollution category | Coal tar distillation is listed in the Red category in CPCB's classification of January 2025, so consent to establish and operate from the State Pollution Control Board carries stricter conditions and monitoring |
|---|---|
| Hazardous waste | Authorisation from the State Pollution Control Board for tarry residues, still bottoms and tar storage tank residue, which appear in Schedule I of the hazardous waste rules |
| Product standard | IS 218:1983 is the BIS specification for creosote oil used as a wood preservative, covering the quality buyers test for |
| Customs classification | Creosote oils fall under HS subheading 2707.91 |
| Factory and fire | Factory licence under the Factories Act and a fire NOC, given the fired heater and stored hot oils; rules vary by state |
| Business registration | Udyam registration where eligible, and GST registration |
Who buys creosote oil in India?
Most creosote goes to wood treatment plants that pressure-impregnate timber used outdoors, where it protects against termites, fungi and marine borers. A second outlet is carbon black, where coal tar oils are blended into feedstock.
Buyers approve a supplier on distillation range, water content and how uniform each batch is. Once approved, a steady supplier tends to keep the account.
- Wood treatment and timber impregnation plants
- Railway sleeper and pole treatment contractors
- Carbon black manufacturers
- Marine and harbour timber contractors
- Chemical traders and distributors
Location decides margins: crude tar is heavy, hot to handle and comes from a few coke oven sites. A distiller close to a tar source and to treatment yards saves freight both ways.
Mistakes that weaken a creosote oil project report
- No product balance for the whole tar barrel
Pitch is usually the main product of tar distillation by weight. A report that ignores pitch, naphthalene oil and wash oil sales misstates both revenue and storage needs.
- No tar supply agreement
Lenders want to see where the tar comes from, for how long and with what water limits. A plant without a contract is a plant without feed.
- Under-costing fuel and tracing
The tube still burns fuel and every tar and pitch line needs heating. In the sample, power and fuel are 6% of sales; leaving tracing out makes running cost look lower than it is.
- No budget for hazardous waste disposal
Tarry sludge and still bottoms go to an authorised disposal facility at a cost per tonne. Red category consent also means stack and effluent monitoring every year.
How NPCS helps you set up a creosote oil plant
- Tar balance and capacitySize the still to your tar supply and work out the creosote, pitch and other oil outputs.
- Distillation route and equipmentCompare batch and continuous vacuum units and collect supplier quotations.
- Bank-ready project reportProjections, DSCR and working capital in the format your lender asks for.
- Approvals and layoutRed category consent, hazardous waste authorisation and a plant layout with safe tank spacing.
NPCS's client list shows 269 assignments in specialty chemicals, and the NPCS project team, led by founder Ajay Kumar Gupta, has prepared techno-economic reports for chemical plants since 1994.
What's inside the creosote oil sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
18 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS creosote oil project reports
These are creosote oil project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Vacuum Distillation OF Crude Coal TAR Specifically Creosote OIL | 7500 MT / Annum | ₹3.2 crore | 43% | 57% | Get this report |
| Vacuum Distillation of Crude Coal Tar(SPECIFICALLY Creosote OIL) | Creosote Oil 1875 MT/Annum,Phenolic or Carbolic Oil 300 MT/Annum,Naphthalic Oil 900 MT/Annum,Wash Oil 600 MT/Annum,Light Oil 75 MT/Annum, Me… | ₹3.23 crore | 26% | 33% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Creosote Oil project report: frequently asked questions
What is the cost of a creosote oil manufacturing plant in India?
Our sample report models a 14 MT per day creosote oil plant at ₹1,124 lakh, including ₹566 lakh of plant and machinery, land, building and working capital margin. Your cost depends on tar throughput, whether you buy a batch still or a continuous vacuum unit, pollution control needs and land price. A project report works this out for your site.
What is creosote oil made from?
Creosote oil is made from crude coal tar, the by-product of high-temperature coking of coal at steel plants and coke ovens. The tar is dehydrated and distilled, and the higher-boiling oil fraction that comes off between the light oils and pitch is collected as creosote. In our sample report crude coal tar is 88% of raw material cost.
What is creosote oil used for?
Its main use is pressure treatment of wood that stays outdoors or in the ground: railway sleepers, electric and telecom poles, marine piles and fencing posts. Treated wood resists termites, fungi and marine borers. Coal tar oils from the same distillation are also blended into carbon black feedstock and used as wash oil for scrubbing coke oven gas.
Is a creosote oil plant profitable?
In our illustrative sample, a 14 MT per day plant earns a 26% return on investment in Year 3, breaks even at 34% of capacity and pays back in about 3.2 years. Real profit depends on the price you pay for crude tar, how much pitch and other oils you sell, fuel cost for the tube still and buyer credit terms.
Which licences are needed for a coal tar distillation unit?
Coal tar distillation is in the Red category of CPCB's January 2025 classification, so you need consent to establish and operate from the State Pollution Control Board under its stricter conditions. Tarry residues and still bottoms need hazardous waste authorisation. IS 218 is the BIS specification for creosote used as wood preservative. Factory licence, fire NOC, Udyam and GST registration also apply.
What is the HSN code for creosote oil?
Creosote oils fall under HS subheading 2707.91, within heading 27.07, which covers oils and other products of the distillation of high-temperature coal tar. Indian tariff and GST codes build on this six-digit number. Confirm the full eight-digit code and the current GST rate with your chartered accountant before you invoice.
Is the sample report free and can I use it for a loan?
Yes, the sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report, and its figures are representative rather than taken from a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own tar source, capacity, location and lender.
Sources and references
- Classification of sectors into Red, Orange, Green, White and Blue categories (January 2025)Central Pollution Control Board (hosted by Maharashtra Pollution Control Board), checked Oct 2026
- IS 218:1983 Specification for creosote oil for use as wood preservativesBureau of Indian Standards, checked Oct 2026
- Schedule I, list of hazardous wastes (Hazardous and Other Wastes Rules)Delhi Pollution Control Committee, checked Oct 2026
- Harmonized System 2022, subheading 2707.91 Creosote oilsWorld Customs Organization, checked Oct 2026
- Environmental recommendations for wood preservation facilities: creosote, chapter D-1Environment and Climate Change Canada, checked Oct 2026
