What is a cnsl based resin project report?
A CNSL based resin in powder and liquid form project report is a detailed project report (DPR) for a plant that reacts cashew nut shell liquid with formaldehyde to make liquid resin, then cures and grinds part of it into powder resin. It covers process, machinery, raw materials, market, project cost, finance, projections, DSCR and break-even.
Promoters use it to size the plant and raise a term loan; banks and investors use it to check whether the plant can repay and earn a return.
Also known as: CNSL resin, cashew nut shell liquid resin.
CNSL based resin plant cost and economics
Our sample report models a 7.5 MT per day plant running 330 days a year, or 2,475 MT per year. It starts at 60% capacity and reaches 80% in Year 5, with an average selling price of ₹87,000 per MT across liquid and powder grades.
| Land and site development | 55.54 |
|---|---|
| Building and civil works | 228.31 |
| Plant and machinery | 461.70 |
| Other fixed assets | 53.97 |
| Contingencies | 34.50 |
| Preliminary and pre-operative | 20.85 |
| Working capital margin | 49.06 |
| Total | 903.93 |
| Promoter's contribution (25%) | 225.98 |
|---|---|
| Term loan from bank (75%) | 677.95 |
| Cash credit limit (separate) | 147.19 |
| Total project cost | 903.93 |
DSCR (debt service coverage ratio, the cash available to repay the loan divided by the instalments due) is lowest at 1.59 in Year 2, the first full year of repayment. That is the year a lender looks at hardest.
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.
CNSL based resin manufacturing process
CNSL is a natural phenolic oil, so it reacts with formaldehyde much as phenol does. One reactor makes the base resin; the plant then splits it into a liquid line and a powder line.
- Test incoming CNSL
Each tanker or drum lot is checked for viscosity, moisture and polymer content, because heat-treated technical CNSL varies with the season and the shelling unit it came from.
- Charge and condense
CNSL and formaldehyde are charged to the jacketed reactor with an acid or alkali catalyst. The reaction gives off heat, so thermic fluid and cooling water hold the temperature steady.
- Dehydrate under vacuum
Water formed in the reaction is pulled off under vacuum until the resin reaches the target viscosity; stopping late gels the batch inside the reactor.
- Thin and filter liquid grades
For paint, varnish and laminate buyers, the hot resin is cut with solvent to the agreed solids content, filtered and filled in MS drums.
- Cure powder grades with hexamine
For friction and binder buyers, the resin is blended with hexamine, spread on trays and cured in an oven until it turns hard and brittle.
- Grind and classify
The cured mass is pulverised and passed through an air classifier; oversize goes back to the mill so each lot meets the buyer's mesh range.
- Test and pack
Each batch is tested for flow, cure time and acetone extract (the share that is still uncured), then packed in HDPE bags or drums with a batch number.
Powder or liquid form: which CNSL resin line to build
Most plants make both, but the split between the two decides the machinery, the buyers and the working capital. The sample report assumes one combined plant.
| Product | Liquid: thinned CNSL formaldehyde resin. Powder: hexamine-cured resin ground to a set mesh, sold as binder or friction dust |
|---|---|
| Extra equipment | Liquid: thinning tank, filter press, solvent recovery. Powder: curing oven, pulveriser with air classifier, dust collection |
| Main buyers | Liquid: paint, varnish, laminate and acid-resistant cement makers. Powder: brake lining, brake pad and clutch facing makers |
| What the buyer tests | Liquid: viscosity, solids and colour. Powder: particle size, acetone extract, cure time and ash |
| Packing | Liquid: MS drums. Powder: HDPE bags with liners to keep out moisture |
| Main risk | Liquid: solvent storage and fire safety. Powder: fine dust and long buyer approval trials |
Raw materials for CNSL based resin
Technical CNSL is the oil left after shells are roasted or heat-treated in cashew processing, rich in cardanol. Raw materials come to 45.6% of sales in the sample, and CNSL alone is 70% of that bill, so its price sets the margin.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Technical cashew nut shell liquid (CNSL) | 70% | 480.84 |
| Formaldehyde (37% formalin) and paraformaldehyde | 12% | 82.43 |
| Hexamine | 8% | 54.95 |
| Solvents for liquid grades | 6% | 41.21 |
| Acid and alkali catalysts | 4% | 27.48 |
| Total | 100% | 686.91 |
BIS publishes IS 840:2026 as the specification for cashewnut shell liquid; use it as the reference in your purchase contracts.
Machinery for a CNSL resin plant
The jacketed reactor is the largest single item, at ₹129.28 lakh in the sample, followed by the thermic fluid heater that supplies its process heat.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Jacketed resin reactor with stirrer and condenser | Runs the CNSL and formaldehyde reaction | 129.28 |
| Thermic fluid heater | Heats the reactor jacket | 64.64 |
| CNSL, formalin and solvent storage tanks with pumps | Holds and transfers liquids | 46.17 |
| Vacuum system and solvent recovery unit | Removes reaction water, recovers solvent | 36.94 |
| Thinning tank and filter press | Makes and cleans liquid grades | 36.94 |
| Curing oven with trays | Hardens hexamine-blended resin | 36.93 |
| Pulveriser with air classifier | Grinds powder to mesh size | 55.40 |
| Fume scrubber and effluent treatment plant | Treats vapours and process water | 36.93 |
| Drum and bag filling equipment | Weighs and packs finished resin | 18.47 |
| Total plant and machinery | 461.70 | |
Costs are the sample report's estimates for a 7.5 MT per day plant. Get current quotations before you finalise.
Utilities and manpower for a CNSL resin plant
Power and fuel cost ₹119.20 lakh in Year 3 of the sample, 7.9% of sales. The thermic fluid heater, vacuum pumps and pulveriser are the main users. Cooling water for the reactor condenser is a must, since the reaction gives off heat.
| Category | Number | Monthly wage (₹) | Annual cost (₹ lakh) |
|---|---|---|---|
| Management, supervision and administration | 6 | 32,500 | 23.40 |
| Skilled workers and operators | 15 | 20,500 | 36.90 |
| Semi-skilled and unskilled workers | 21 | 13,500 | 34.02 |
| Total | 42 | 94.32 |
Reactor operators and a lab chemist who can run cure-time and acetone extract tests are the hardest posts to fill.
Licences and approvals for a CNSL resin unit
The chemical part of the approvals list is driven by formaldehyde and solvents, not by CNSL itself. These were checked against official sources in October 2026.
| Business registration | Udyam (MSME) registration and GST registration |
|---|---|
| Pollution board consent | Consent to establish and consent to operate from the State Pollution Control Board. Odisha, for example, lists synthetic resins under Orange, while organic chemicals manufacturing is Red; confirm your state's category |
| Hazardous chemicals | Formaldehyde and phenol are listed in Schedule 1 of the Hazardous Chemical Rules, 1989. Storing 5 tonnes or more of formaldehyde brings site notification and an on-site emergency plan; 50 tonnes or more adds a safety report and audit |
| Raw material standard | IS 840:2026, Cashewnut Shell Liquid (CNSL) Specification, which supersedes IS 840:1986 |
| Factory and fire safety | Factory licence under the Factories Act and a fire NOC for solvent and resin storage; rules vary by state |
| Safety data sheets | Safety data sheets and labels for formaldehyde and other listed chemicals held on site, as the 1989 rules require |
Market for CNSL based resin in India
Demand follows vehicles. Brake lining, brake pad and clutch facing makers buy powder resin as a binder and friction dust. So output of two-wheelers, cars, trucks and railway brake blocks drives the powder line. Liquid grades sell to paint, varnish, laminate, foundry and acid-resistant cement units.
India is one of the largest CNSL producers, yet CSIR-NIIST notes that most of it leaves the country with little value added. That leaves room for plants that turn CNSL into resin close to the cashew belts.
- Brake lining, brake pad and clutch facing manufacturers
- Paint, varnish and anti-corrosive coating producers
- Laminate makers and foundry chemical units
- Rubber goods and adhesive makers
- Acid-resistant cement and floor mortar suppliers
- Chemical traders and exporters
Where a new plant wins: brake makers rarely switch resin suppliers on price alone. A plant that holds cure time and particle size steady from batch to batch gets approved and then keeps the business.
Mistakes that weaken a CNSL based resin project report
- One price for every grade
Liquid resin, cured powder and friction dust sell at different rates. A report that prices all output at the best rate overstates sales and DSCR.
- Treating CNSL as a uniform input
Polymer content and moisture change from lot to lot. Without lot testing and a buffer stock, batches gel or miss viscosity, and yield falls.
- Skipping the hazardous chemical limits
A full formalin tank can cross the 5 tonne threshold. Plan storage, notification and the emergency plan before the layout is fixed.
- Under-sizing the scrubber and effluent plant
Reaction water carries phenolics and formaldehyde. The sample sets aside ₹36.93 lakh for treatment; leaving it out risks the consent to operate.
- Ignoring approval time in the ramp-up
Brake makers run trials before they order. Year 1 sales should start low, as the sample does at 60% of capacity.
How NPCS helps you set up a CNSL resin plant
- Grade mix and capacitySplit output between liquid resin, powder resin and friction dust to suit your buyers.
- Process and machineryReactor size, curing and grinding line, and supplier quotations.
- Bank-ready project reportProjections, DSCR and working capital in the format your lender wants.
- Approvals and layoutFormaldehyde storage, pollution consent and plant layout for your state.
NPCS's client list shows 269 assignments in specialty chemicals, prepared since 1994 for entrepreneurs, banks and companies in India and abroad.
What's inside the cnsl based resin sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
19 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Find NPCS project reports in your budget
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
CNSL Based Resin project report: frequently asked questions
What is the cost of a CNSL based resin manufacturing plant in India?
Our sample report models a 7.5 MT per day plant at ₹904 lakh, including ₹462 lakh of plant and machinery, land, building and working capital margin. As an indicative guide, a 2–3 MT per day liquid-only unit may need about ₹2.5–4 crore, and a 10–12 MT per day plant about ₹11–15 crore. Your own report works out the cost for your capacity, grades and site.
What raw materials are used to make CNSL based resin?
Technical cashew nut shell liquid (CNSL) is the main input, at 70% of raw material cost in our sample report. The rest is formaldehyde as formalin or paraformaldehyde, hexamine to cure powder grades, solvents to thin liquid grades, and small amounts of acid and alkali catalysts. CNSL quality varies by season and supplier, so each lot is tested before use.
What is the difference between CNSL powder resin and liquid resin?
Liquid resin is the reacted CNSL and formaldehyde product, dehydrated and usually thinned with solvent; it goes to paints, varnishes, laminates and cements. Powder resin is the same base resin blended with hexamine, cured hard, then ground to a set mesh size. Brake lining and clutch facing makers buy the powder as a binder and as friction dust.
Is a CNSL resin plant profitable?
In our illustrative sample, the 7.5 MT per day plant earns a net profit of ₹195 lakh on sales of ₹1,507 lakh in Year 3. That is a 22% return on investment, with break-even at 38% of capacity. Real results depend on the CNSL price, the mix of liquid and powder grades, power and fuel cost, and how quickly brake makers approve your resin.
Which licences are needed for a CNSL resin unit?
You need Udyam and GST registration, consent to establish and operate from the State Pollution Control Board, a factory licence and a fire NOC. Formaldehyde is a listed hazardous chemical, so storage above 5 tonnes brings site notification and an on-site emergency plan under the hazardous chemical rules. Rules vary by state, so confirm them locally.
Where should a CNSL resin plant be located?
Close to CNSL supply or to buyers, ideally both. CNSL is produced where cashew is processed, along the coasts of Kerala, Tamil Nadu, Karnataka, Goa, Andhra Pradesh and Odisha. Many promoters compare freight on liquid CNSL with freight on finished resin to their main brake lining and paint buyers before choosing a site.
Is the sample report free and can I use it for a loan?
The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report; its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and lender.
Sources and references
- IS 840:2026 Cashewnut Shell Liquid (CNSL): SpecificationBureau of Indian Standards, checked Oct 2026
- The Manufacture, Storage and Import of Hazardous Chemical Rules, 1989Punjab Pollution Control Board (Government of India rules), checked Oct 2026
- Categorisation of industrial sectors: Orange categoryState Pollution Control Board, Odisha, checked Oct 2026
- Categorisation of industrial sectors under Red as per CPCB criteriaState Pollution Control Board, Odisha, checked Oct 2026
- Inspection report: CNSL, cardanol and CNSL resin unit, PuducherryPuducherry Pollution Control Committee, checked Oct 2026
- Cashew nut shell liquid: project profileOffice of the Development Commissioner (MSME), checked Oct 2026
- Cashew nut shell liquid based productsCSIR-National Institute for Interdisciplinary Science and Technology, checked Oct 2026
- Novel applications of cashew nut shell liquid in the polymer field (PhD thesis)Cochin University of Science and Technology, checked Oct 2026
