WhatsApp us
Request a Quote

Project reports in Specialty Chemicals

Biodiesel Plant Project Report

Plant cost, feedstock, machinery and five-year profitability for a used cooking oil biodiesel plant, with a free sample project report PDF you can open now.

Plant capacity
6,400 litres per day
Total project cost
₹444 lakh
Plant and machinery
₹208 lakh
Return on investment
16% (Year 3)
Break-even
49% of capacity
Payback period
About 4.3 years

Figures from our illustrative sample report for a typical unit. They show the format of an NPCS report and are not quotes for your project.

What is a biodiesel project report?

A biodiesel project report is a detailed project report (DPR) for a plant that converts used cooking oil or non-edible oils into B100 biodiesel by reacting them with methanol. It sets out feedstock supply, process, machinery, approvals, project cost, means of finance, five-year projections, DSCR and break-even for the promoter and the bank.

Promoters use it to size the plant, bid for oil company supply and raise a term loan; lenders use it to judge whether thin fuel margins can still repay the debt.

Also known as: biodiesel plant project report, project report on biodiesel, biodiesel DPR, biodiesel business plan, UCO biodiesel plant report.

Biodiesel manufacturing plant cost in India and plant economics

Our sample report models a 6,400 litres per day plant running 330 days a year, which is 21,12,000 litres a year at full capacity. It starts at 60% utilisation, reaches 80% in Year 5 and sells B100 at ₹91.70 per litre, excluding GST.

The figures show why biodiesel is a volume business. Sales in Year 3 are more than three times the project cost, yet net profit is only 5.2% of sales. A small change in feedstock price moves the result a lot.

₹444 lakhTotal project cost
₹1,356 lakhSales in Year 3
₹71 lakhNet profit in Year 3
1.49Average DSCR
Cost of project (₹ lakh)
Land and site development30.19
Building and civil works108.54
Plant and machinery208.37
Other fixed assets24.69
Contingencies15.85
Preliminary and pre-operative9.69
Working capital margin46.67
Total444.00
Means of finance (₹ lakh)
Promoter's contribution (25%)111.00
Term loan from bank (75%)333.00
Cash credit limit (separate)140.02
Total project cost444.00

Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. DSCR (debt service coverage ratio, the cash available to pay each year's loan instalments divided by those instalments) never falls below 1.30 in the sample. All figures are illustrative.

Biodiesel manufacturing process from used cooking oil

Biodiesel is made by transesterification: the oil's triglycerides react with methanol to give methyl esters (biodiesel) and glycerine. Used cooking oil needs more preparation than fresh oil, because frying leaves water, food solids and free fatty acids in it.

  1. Feedstock filtration and drying

    Oil is heated, filtered and dewatered. Water left in the oil turns the catalyst into soap and cuts yield.

  2. Acid pre-treatment

    When free fatty acids are high, the oil is first reacted with methanol and sulphuric acid, which turns the acids into esters instead of soap.

  3. Transesterification

    The oil is mixed with methanol and potassium hydroxide and held at about 60°C in stirred reactors until conversion is complete.

  4. Glycerine separation

    The heavier crude glycerine settles to the bottom and is drawn off. It is roughly a tenth of the ester output by weight and is sold as a by-product.

  5. Methanol recovery

    Excess methanol is flashed off from both the ester and glycerine streams, condensed and reused, which keeps methanol cost and vapour risk down.

  6. Purification

    The ester is washed or distilled under vacuum and dried, so that acid value, water and glycerine content meet the B100 standard.

  7. Testing and dispatch

    Each batch is tested in the plant laboratory and loaded into tankers for oil company depots or bulk buyers.

Which feedstock and process route suits a biodiesel plant?

The feedstock decides the process, not the other way round. Most new plants in India are built to handle several oils, because no single source is available all year at a steady price.

Used cooking oil (UCO)Preferred domestic feedstock under the National Policy on Biofuels. Collected from hotels, restaurants and food processors through FSSAI-enrolled channels. Quality varies, so filtration and acid pre-treatment are needed.
Non-edible oilsKaranja, jatropha and similar tree-borne oils. Supply depends on seed collection and is seasonal; free fatty acids are often high, so the two-step acid and alkali route is used.
Acid oil and animal fatsLower-cost by-products of oil refining and rendering. High free fatty acids and impurities call for pre-treatment and, ideally, distillation of the final ester.
Palm stearinHistorically the main feedstock, mostly imported. Government policy aims to replace it with UCO, so a plan built only on imported stearin carries policy risk.
Batch or continuousBatch reactors suit plants up to about 10,000 litres per day and mixed feedstock. Continuous lines lower cost per litre at larger scale but need a steadier oil supply.
Water wash or distillationWater washing is cheaper but creates effluent. Vacuum distillation gives a cleaner product from poor feedstock and makes depot tests easier to pass.

The sample report assumes a batch, multi-feedstock plant with acid pre-treatment and vacuum distillation.

Raw materials for biodiesel production

Raw materials are 63.8% of sales in our sample report, and oils alone are 84% of raw material cost. Methanol is the second input; plants usually feed more than they need and recover the excess.

Raw material cost in Year 3 of the sample report
Raw materialShare of costYear 3 (₹ lakh)
Used cooking oil and non-edible oils84%726.61
Methanol11%95.15
Potassium hydroxide catalyst3%25.95
Sulphuric acid for pre-treatment2%17.30
Total100%865.01

UCO is bought on the free fatty acid and moisture it carries. Lenders look for written supply arrangements with aggregators, not only a list of hotels.

Machinery for a biodiesel plant

The transesterification reactors are the largest machinery item in the sample, followed by the vacuum distillation unit. Reactors, columns and tanks are usually mild steel or stainless steel fabrications built to the plant's design.

MachineWhat it doesSample cost (₹ lakh)
Feedstock storage tanks and filtration unitHolds oil and removes solids and water25.01
Acid esterification pre-treatment reactorConverts free fatty acids before the main reaction29.17
Transesterification reactors with heating systemReacts oil with methanol and catalyst41.67
Glycerine settling and separation systemDraws off crude glycerine20.84
Methanol recovery columnRecovers excess methanol for reuse25.00
Biodiesel vacuum distillation unitPurifies the ester to fuel grade37.51
Product storage tanks and tanker loadingStores B100 and loads tankers16.67
Quality control laboratoryTests each batch before dispatch12.50
Total plant and machinery208.37

Costs are the sample report's estimates for a 6,400 litres per day plant. Get current quotations before you finalise.

Licences, BIS standard and GST for a biodiesel plant

Biodiesel is a transport fuel, so the rules go beyond a normal chemical unit. These are the approvals and tax points to settle before you commit to a site, as checked in October 2026.

Product standardB100 must conform to IS 15607:2022, the BIS specification for fatty acid methyl esters (second revision). Oil company tenders ask for this grade.
Sale of biodieselThe 2019 guidelines for sale of biodiesel for blending with high speed diesel allow registered manufacturers to sell B100 only, not any blend. State or UT authorities register and inspect sellers.
Used cooking oil collectionUnder FSSAI's RUCO order, food businesses may hand UCO only to enrolled units or their authorised aggregators. Manufacturers registered under the 2019 guidelines are deemed enrolled.
GSTHSN 3826. 5% on biodiesel supplied to oil marketing companies for blending, since October 2021. 18% on other biodiesel from 22 September 2025, up from 12%.
Pollution board consentConsent to establish and operate from the State Pollution Control Board. UCO collection centres are in the White category; confirm the plant's own category with your state board.
Factory and fire safetyFactory licence and fire NOC, with storage, earthing and ventilation designed for methanol, which is highly flammable.

Rules and rates change. Confirm the current position with the state authority, the oil company tender and your tax adviser before applying.

Market for biodiesel in India: who buys it

The National Policy on Biofuels, amended in June 2022, proposes an indicative target of 5% biodiesel blending in diesel, or direct sale, by 2030. Public sector oil marketing companies buy B100 through expressions of interest issued in cycles and blend it at their depots.

Outside the oil companies, a registered plant can sell B100 directly to bulk consumers. Buyers look for steady quality, tanker delivery and a fair price against diesel.

  • Public sector oil marketing companies
  • Bus, truck and logistics fleet operators
  • State transport undertakings and other bulk consumers
  • Industries running diesel generator sets and boilers
  • Registered biodiesel retail outlets

Plan for uneven oil company demand: as reported to the Lok Sabha in December 2023, oil company purchases were 10.55 crore litres in 2019-20, fell to 0.049 crore litres in 2021-22 and reached 29.25 crore litres in 2023-24 up to November. A report should test a year with low tender volumes.

Mistakes that weaken a biodiesel project report

  • Pricing at the retail diesel rate

    Oil companies pay a purchase price fixed for each tender cycle, excluding GST and freight. Using the pump price for diesel overstates sales and DSCR.

  • Assuming one clean feedstock all year

    UCO quality and free fatty acids vary by supplier and season. A report that ignores pre-treatment losses and soap formation shows a yield the plant will not reach.

  • Using the wrong GST rate

    Sales to oil companies for blending and sales to other buyers carry different rates. Mixing them up distorts working capital and price quotes.

  • Skipping the laboratory and distillation

    Saving on testing or purification risks failed depot tests, rejected tankers and lost supply status under the tender.

  • Leaving out debtor days

    In the sample, trade receivables are the largest current asset at 45 days of sales. Without them the cash credit limit is too small.

How NPCS helps you set up a biodiesel plant

  • Feedstock and capacity planSize the plant to the UCO and non-edible oil you can secure, with a feedstock price sensitivity.
  • Process route and machineryCompare batch and continuous lines, washing and distillation, and get equipment quotations.
  • Bank-ready project reportProjections, DSCR, break-even and working capital built on oil company purchase prices.
  • Approvals and layoutPlant layout for methanol safety and the list of state, BIS and FSSAI approvals for your site.

NPCS's client list shows 269 assignments in specialty chemicals, and the NPCS project team, led by founder Ajay Kumar Gupta, has prepared project reports for chemical plants since 1994.

What's inside the biodiesel sample report

  1. Introduction
  2. Uses and applications
  3. Market potential
  4. Manufacturing process
  5. Raw materials
  6. Plant and machinery
  7. Land, building and utilities
  8. Manpower
  9. Licences and approvals
  10. Project cost and means of finance
  11. Working capital
  12. Projected profitability
  13. Cash flow statement
  14. Projected balance sheet
  15. Depreciation
  16. Term loan repayment
  17. Debt service coverage
  18. Break-even analysis
  19. Financial ratios
  20. Key assumptions
  21. Conclusion
  22. Monthly loan repayment schedule

19 pages, five-year projections, illustrative figures.

Open sample report

Free sample or a report for your project?

What you getFree sampleNPCS report for your project
Capacity and locationTypical unitYour capacity, site and state
FiguresIllustrativeBuilt on current prices and quotations
Machinery suppliers and quotationsNoYes
Market survey for your regionNoYes
Bank or scheme format (PMEGP, term loan)NoYes
Use for a loan applicationNoYes

Find NPCS project reports in your budget

Find other projects that fit your budget Search NPCS project profiles by investment, return and break-even, the same search as our Startup Selector.

What clients say about NPCS

4.7

264 Google reviews, as of 20 Oct 2026

Clients most often mention

  • feasibility reports 18
  • project report 16
  • helpful for startups 15
  • detailed reports 8
Read all reviews on Google
  • Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.

    Piyush Singh, Google review, 2026

  • Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended

    Saroj Yadav, Google review, 2026 View on Google

  • In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.

    Shrishti Gautam, Google review, 2026

  • NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.

    Raj Yadav, Google review, 2026

Biodiesel project report: frequently asked questions

How much does it cost to set up a biodiesel plant in India?

Our sample report models a 6,400 litre per day plant at ₹444 lakh, including land, building, machinery and working capital margin. As an indicative guide, a smaller batch plant of 3,000–5,000 litres per day may need ₹2.5–4 crore. A 30,000 litre per day continuous plant with distillation can cost ₹15–30 crore. Your report works out the cost for your capacity and site.

Which raw material is used to make biodiesel in India?

Used cooking oil collected from hotels, restaurants and food processors is the main domestic feedstock, along with non-edible oils, acid oils and animal fats. Methanol and a catalyst such as potassium hydroxide are the other inputs. In our sample report, oils make up 84% of raw material cost and methanol 11%.

Is a biodiesel plant profitable?

It can be, but margins are thin. In our illustrative sample, net profit is 5.2% of sales in Year 3, return on investment is 16% and break-even is at 49% of capacity. Profit depends mostly on the gap between feedstock cost and the oil company purchase price, so feedstock contracts matter more than plant size.

Who buys biodiesel from a new plant?

Public sector oil marketing companies are the largest buyers. They purchase B100 through periodic expressions of interest and blend it with diesel. Under the 2019 guidelines, a registered manufacturer can also sell to bulk consumers such as fleet operators and to registered retail outlets. These sales must be pure B100, not a blend.

What is the GST rate on biodiesel?

Biodiesel under HSN 3826 supplied to oil marketing companies for blending with high speed diesel attracts 5% GST, a rate in force since October 2021. Biodiesel sold to other buyers moved from 12% to 18% from 22 September 2025. Check the current rate with your tax adviser before you price a contract.

Which standard must biodiesel meet in India?

B100 biodiesel must conform to IS 15607:2022, the Bureau of Indian Standards specification for fatty acid methyl esters, second revision. Oil company depots test supplies against it. Your plant needs a laboratory that checks each batch before dispatch, because a failed tanker means freight both ways and lost sales.

Is the sample report free and can I use it for a loan?

The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report. Its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, feedstock, location and lender.

Sources and references

  1. Biodiesel: policy and procurementMinistry of Petroleum and Natural Gas, checked Oct 2026
  2. Lok Sabha unstarred question 3024 on promotion of biodiesel (21 Dec 2023)Lok Sabha, Ministry of Petroleum and Natural Gas, checked Oct 2026
  3. Lok Sabha unstarred question 2843 on regulations for biodiesel (8 Aug 2024)Lok Sabha, Ministry of Petroleum and Natural Gas, checked Oct 2026
  4. Recommendations of the 56th meeting of the GST CouncilPress Information Bureau, Ministry of Finance, checked Oct 2026
  5. Order on collection of used cooking oil under RUCO (23 Mar 2022)Food Safety and Standards Authority of India, checked Oct 2026
  6. Laboratory scope listing IS 15607 (2022), Biodiesel B-100 FAME specificationBureau of Indian Standards, checked Oct 2026
  7. Classification of sectors into Red, Orange, Green, White and Blue categories (Jan 2025)Central Pollution Control Board, via Pollution Control Board Assam, checked Oct 2026
Ajay Kumar Gupta, founder of NPCS

Who prepares NPCS reports

The NPCS project team, led by Ajay Kumar Gupta

This page and its sample report are prepared and reviewed by the NPCS project team, which has written techno-economic feasibility studies and detailed project reports since 1994.

Ajay Kumar Gupta founded Niir Project Consultancy Services (NPCS) and leads the organisation. With 40 years of experience in MSME project consulting, he has built the team that has delivered more than 28,000 project reports for clients worldwide, helping entrepreneurs plan and finance profitable manufacturing businesses.

Ajay Kumar Gupta on LinkedIn

Published
Last updated
Next review
Oct 2027
Reviewed by
NPCS project team

This page is reviewed every 12 months, or sooner when scheme limits, GST rates, BIS rules or pollution categories change. The sample report is illustrative: its figures are generated from industry-typical ratios for a unit of this size, checked so every statement balances, and are not taken from any client project.

Planning a different specialty chemicals project?

These are a few of the projects we advise on. NPCS's published client list records 269 specialty chemicals assignments, so tell us what you are planning.

Tell us your project

Recent specialty chemicals assignments

  • Iiconnic Apparels
    Comprehensive Project Report on SilicaPaurri Garhwal, 2026
  • Parul Industries
    Project Feasibility Report on Nicotine for industrial applicationsValsad, 2026
  • Rich Phytocare Private Limited
    Industrial Project Report on Potassium SchoeniteBodinayakanur, 2026
  • Lakshya Powertech Ltd
    Techno-Economic Project Study on Acoustic PanelsMumbai, 2026
  • Luxury Line Interiors & Furniture
    Project Feasibility Report on Precipitated Silica & Activated Carbon for Industrial ApplicHyderabad, 2026
  • Indian Potash Limited
    Techno-Economic Feasibility Report on Citric AcidCoimbatore, 2026
  • Cecilia Still
    Detailed Project Report on Tall Oil RosinsEurope, 2026
  • Taraka Pamidi
    Technical and Financial Feasibility Report on Silica-, 2025

Get a biodiesel project report for your plant

Tell us your planned capacity, location and loan scheme. Our team will confirm the scope and price of a report built on current machinery quotations and raw material prices for your region.

Reports are prepared in the format banks and PMEGP offices ask for, with five-year projections, DSCR and break-even.

Request a Biodiesel Project Report

Share your plan and our team will call you back within 24 hours.

Start with the sample, then plan your own unit

Open the free biodiesel sample report to see the format, then talk to NPCS about a report for your capacity and location.

Sample PDF WhatsApp
Biodiesel sample project report (illustrative) Download New tab

Illustrative sample. Figures are representative and not from a real project.

Call Us WhatsApp