What is a b naphthol project report?
A b naphthol project report is a detailed project report for a plant that converts naphthalene into beta naphthol (2-naphthol) by sulphonation and caustic fusion. It sets out the process, machinery, raw materials, effluent handling, approvals, project cost, means of finance, five-year projections, DSCR and break-even that a lender or investor reviews.
Chemical entrepreneurs and dye intermediate makers use it to size the plant and raise a term loan; banks use it to judge whether the plant can repay.
Also known as: beta naphthol project report, project report on b naphthol, 2-naphthol plant DPR, b naphthol business plan.
B naphthol manufacturing plant cost in India: sample economics
Our sample report models a plant making 4.4 metric tonnes of beta naphthol per day, or 1,452 MT per year over 330 working days. It starts at 60% of capacity, reaches 80% in Year 5 and sells at ₹2,23,000 per MT ex-GST.
| Land and site development | 112.00 |
|---|---|
| Building and civil works | 238.03 |
| Plant and machinery | 677.57 |
| Other fixed assets | 116.27 |
| Contingencies | 45.78 |
| Preliminary and pre-operative | 29.74 |
| Working capital margin | 73.71 |
| Total | 1,293.10 |
| Promoter's contribution (25%) | 323.28 |
|---|---|
| Term loan from bank (75%) | 969.82 |
| Cash credit limit (separate) | 221.12 |
| Total project cost | 1,293.10 |
DSCR (debt service coverage ratio) is cash available for loan payments divided by the payments due; the sample's lowest year is 1.65. Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.
B naphthol manufacturing process, step by step
Most beta naphthol is made from naphthalene in a batch sequence of sulphonation, caustic fusion and acidification. Temperature control in the first step decides how much of the wanted beta isomer you get.
- Sulphonation
Molten naphthalene reacts with concentrated sulphuric acid at about 160 degrees Celsius; at this temperature the 2-sulphonic acid dominates, while lower temperatures favour the alpha form.
- Hydrolysis and stripping
Steam is blown through the mass to break down the remaining alpha sulphonic acid and carry off unreacted naphthalene for reuse.
- Neutralisation
The acid is neutralised with sodium sulphite, sodium naphthalene-2-sulphonate is filtered out, and the sulphur dioxide released is kept for a later step.
- Caustic fusion
The dried sodium salt is fused with caustic soda at about 300 to 320 degrees Celsius, giving sodium naphtholate and sodium sulphite.
- Acidification
The melt is dissolved in water and acidified with the recovered sulphur dioxide or with sulphuric acid, so crude beta naphthol separates as an oily layer.
- Vacuum distillation
The crude is washed, dried and distilled under vacuum to about 99% purity, leaving a tarry residue that is handled as hazardous waste.
- Flaking and packing
Molten beta naphthol is flaked on a cooled drum and packed in lined HDPE bags to keep out moisture and light.
Which process route suits a beta naphthol plant?
Two routes are used worldwide. For a plant of a few tonnes a day in India, the sulphonation and fusion route is the practical choice; the oxidation route only pays at very large, continuous scale.
| Point | Sulphonation and caustic fusion | Isopropylnaphthalene oxidation |
|---|---|---|
| Main inputs | Naphthalene, sulphuric acid, caustic soda | Naphthalene, propylene, air |
| Operation | Batch, in reactors and fusion pots | Continuous, like the cumene route to phenol |
| Co-product | Sodium sulphite, partly reused in neutralisation | Acetone |
| Effluent | High-salt wastewater that needs a proper treatment plant | Lower salt load, but hydroperoxide safety controls |
| Fit | Small and mid-size plants; the route in our sample | Very large plants with a propylene supply |
Raw materials for b naphthol
Refined naphthalene is the main input. It comes from coal tar distillers and imports, so its price tracks coal tar supply from steel-plant coke ovens. In our sample, raw materials take 47.4% of sales.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Refined naphthalene | 58% | 622.77 |
| Caustic soda | 26% | 279.17 |
| Sulphuric acid | 10% | 107.37 |
| Sodium sulphite and soda ash | 6% | 64.43 |
| Total | 100% | 1,073.74 |
Year 3 cost at 70% utilisation in our illustrative sample. Packing is counted separately.
Machinery for a b naphthol plant
The fusion pots are the costliest item in our sample, because they run near 320 degrees Celsius with molten caustic and need thermic fluid heating.
| Equipment | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Jacketed sulphonation reactors | React naphthalene with sulphuric acid | 94.86 |
| Hydrolysis and naphthalene recovery system | Removes the alpha isomer, recovers naphthalene | 60.98 |
| Neutralisation vessels and filter press | Form and separate the sodium salt | 67.76 |
| Caustic fusion pots with thermic fluid heating | Fuse the salt with caustic soda | 121.96 |
| Dilution and acidification vessels | Free crude beta naphthol from the melt | 60.98 |
| Vacuum distillation unit | Purifies the crude to about 99% | 94.86 |
| Drum flaker and bag filling machine | Flakes and packs the product | 54.21 |
| Thermic fluid heater and steam boiler | Supply process heat and steam | 54.20 |
| Scrubber and effluent treatment plant | Capture gases and treat wastewater | 67.76 |
| Total plant and machinery | 677.57 | |
Sample estimates for a 4.4 MT per day plant. Get current quotations, with material of construction stated, before you finalise.
Utilities, manpower and site for a beta naphthol plant
Heat is the utility that matters most: fusion needs high-temperature thermic fluid, while hydrolysis and distillation use steam and vacuum.
| Power and fuel | ₹133.00 lakh in Year 3 in our sample, 5.9% of sales |
|---|---|
| Process heat | Thermic fluid heater for the fusion pots; steam boiler for hydrolysis and distillation |
| Water | Process water for dilution and washing, plus cooling water for condensers and the flaker drum |
| Manpower | 65 people in our sample: 10 in management and supervision, 23 skilled operators, 32 semi-skilled and unskilled |
| Wage bill | ₹147.42 lakh in Year 1, rising 5% a year |
| Land and building | ₹112.00 lakh for land and site development and ₹238.03 lakh for building and civil works |
Approvals for a b naphthol plant
Environmental approvals take the longest, so start them while the project report and land are being finalised.
| Environmental clearance | Needed before construction; item 5(f) of the EIA Notification 2006 covers synthetic organic chemicals, including dyes and dye intermediates |
|---|---|
| Pollution board consent | Consent to establish and consent to operate; dyes and dye intermediates are listed as a Red category activity |
| Hazardous waste authorisation | From the State Pollution Control Board under the Hazardous and Other Wastes Rules, 2016, for distillation residue, ETP sludge and spent sodium sulphite |
| Factory licence | Under the Factories Act; chemical units usually face added safety conditions, which vary by state |
| Business registration | Udyam (MSME) registration and GST registration |
Rules as checked in October 2026. Confirm current requirements with your State Pollution Control Board.
Who buys beta naphthol in India?
Dye and pigment makers take most of the output. They convert beta naphthol into Tobias acid, BON acid and naphthol AS couplers, mainly in the dye intermediate clusters of Gujarat and Maharashtra.
India has made beta naphthol for decades. A process developed by the Central Fuel Research Institute, Dhanbad, was licensed to an Indian producer when domestic output fell short of demand. Imports from China now set the benchmark price.
- Dye intermediate manufacturers
- Organic pigment makers
- Rubber chemical producers
- Fragrance chemical makers (nerolin, yara yara)
- Pharmaceutical and agrochemical intermediate makers
- Chemical traders and exporters
Where a domestic plant wins: dye intermediate buyers run their own batches on tight schedules. Steady purity, short lead times and low freight to Vapi, Ankleshwar or Ahmedabad can matter as much as matching the import price.
Mistakes that weaken a b naphthol project report
- Pricing from small-pack listings
Online rates for 25 kg lots run far above bulk contract prices. Sales and DSCR must use ex-factory bulk rates, checked against the landed cost of Chinese material.
- Assuming theoretical yield
Some naphthalene ends as alpha isomer, tar and distillation residue. Raw material per tonne must reflect yields a real plant achieves.
- Under-budgeting effluent and sulphite handling
Fusion leaves high-salt water and sodium sulphite. In our sample the scrubber and ETP cost ₹67.76 lakh, as much as the neutralisation section.
- Fixing a naphthalene price for five years
Naphthalene is 58% of raw material cost in our sample. A report without a price sensitivity test leaves the lender guessing.
- Leaving environmental clearance off the timeline
Construction cannot start without it, so the implementation schedule and interest during construction must allow for it.
How NPCS helps you set up a b naphthol plant
- Capacity and process sizingSize sulphonation, fusion and distillation to your market, and plan naphthalene recovery and sulphite reuse.
- Bank-ready project reportProjections, DSCR, working capital and sensitivity to naphthalene and selling prices, in your lender's format.
- Machinery and effluent scopeEquipment lists with materials of construction, and ETP and scrubber scope for quotations.
- Approvals roadmapSite selection in a chemical estate and the clearance and consent sequence for your state.
NPCS has prepared project reports and feasibility studies since 1994, and its client list shows 269 assignments in specialty chemicals for entrepreneurs, banks and companies in India and abroad.
What's inside the b naphthol sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
18 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS b naphthol project reports
These are b naphthol project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| B-Naphthol Methyl Ethyl (Yara-Yara) | 100.00 kg/Day | ₹65 lakh | 25% | 61% | Get this report |
| b-Naphthol | 10 MT/Day | ₹8.43 crore | 33.6% | 56.4% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
B Naphthol project report: frequently asked questions
What is b naphthol used for?
B naphthol, also called beta naphthol or 2-naphthol, is mainly a dye intermediate. Dye and pigment makers convert it into Tobias acid, BON acid and naphthol AS couplers for azo colours. Smaller volumes go into rubber antioxidants, fragrance chemicals such as nerolin and yara yara, and pharmaceutical and agrochemical intermediates.
What is the b naphthol manufacturing process?
Naphthalene is sulphonated with concentrated sulphuric acid at about 160 degrees Celsius to form naphthalene-2-sulphonic acid. The acid is neutralised to its sodium salt, fused with caustic soda at about 300 to 320 degrees Celsius, then acidified to free crude beta naphthol. Vacuum distillation brings it to about 99% purity before it is flaked and bagged.
What does a b naphthol manufacturing plant cost in India?
Our sample report models a 4.4 MT per day plant at a total project cost of ₹1,293 lakh, of which plant and machinery is ₹678 lakh. As an indicative guide, plants of 3–6 MT per day fall roughly in the ₹10–16 crore range. Land rates, location in a chemical estate and the scope of effluent treatment move the cost most.
Which approvals does a b naphthol plant need?
Beyond Udyam, GST and a factory licence, a beta naphthol plant needs environmental clearance, because dyes and dye intermediates fall under item 5(f) of the EIA Notification 2006. It also needs consent to establish and operate from the State Pollution Control Board, where dye intermediates are a Red category activity, and hazardous waste authorisation.
What is the difference between alpha and beta naphthol?
Both have the formula C10H7OH; they differ in where the hydroxyl group sits on the naphthalene ring. Alpha naphthol (1-naphthol) carries it at position 1 and melts at about 96 degrees Celsius. Beta naphthol (2-naphthol) carries it at position 2, melts at about 122 degrees Celsius and is the larger-volume dye intermediate.
Is b naphthol manufacturing profitable?
In our illustrative sample, the 4.4 MT per day plant earns a 23% return on investment in Year 3. It breaks even at about 38% of capacity and pays back in about 3.4 years. Real profit depends on the naphthalene price, yield across fusion and distillation, effluent costs and how closely you track Chinese import prices.
Is the sample report free and can I use it for a bank loan?
The sample project report PDF is free to view and download. It is illustrative and shows the format and depth of an NPCS report. Its figures are representative and not based on a real project, so it should not go to a bank. For a loan, NPCS prepares a report for your own capacity, site and lender.
Sources and references
- Standard terms of reference for EIA studies: synthetic organic chemicals industry, item 5(f)Ministry of Environment, Forest and Climate Change, checked Oct 2026
- List of Red category industriesPunjab Pollution Control Board, checked Oct 2026
- SOP for utilisation of spent sodium sulphite under the Hazardous and Other Wastes Rules, 2016Central Pollution Control Board, checked Oct 2026
- Industrial innovations: Beta NaphtholIndia Science, Technology and Innovation portal, Government of India, checked Oct 2026
