What is a ammonium sulphate project report?
An ammonium sulphate project report is a detailed project report (DPR) for a plant that reacts ammonia with sulphuric acid and crystallises the salt into a fertiliser or technical grade. It sets out the process route, raw material balance, machinery, approvals, project cost, five-year projections, DSCR and break-even that a lender or board needs.
Promoters use it to choose a route and capacity and to raise a term loan; banks and investors use it to test whether the plant can repay.
Also known as: ammonium sulfate, (NH4)2SO4, sulphate of ammonia.
Ammonium sulphate manufacturing plant cost in India
Our sample report models a 33 metric tonnes per day (MT per day) synthetic plant running 330 days a year, or 10,890 MT per year at full capacity. It starts at 60% utilisation, reaches 80% in Year 5 and sells at ₹23,800 per MT before GST.
On these figures the plant needs ₹916.69 lakh. Building and civil works take ₹250.00 lakh; the acid, ammonia and crystalliser sections need bunded floors, acid-proof lining and a tall structure for the evaporator. Indicative cost for other scales: about ₹3–5 crore for 10 MT per day and ₹6–10 crore for 20–35 MT per day.
| Land and site development | 60.03 |
|---|---|
| Building and civil works | 250.00 |
| Plant and machinery | 426.33 |
| Other fixed assets | 66.68 |
| Contingencies | 33.82 |
| Preliminary and pre-operative | 20.92 |
| Working capital margin | 58.91 |
| Total | 916.69 |
| Promoter's contribution (25%) | 229.17 |
|---|---|
| Term loan from bank (75%) | 687.52 |
| Cash credit limit (separate) | 176.74 |
| Total project cost | 916.69 |
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. Sample figures are illustrative; other ranges are indicative.
Ammonium sulphate manufacturing process
The synthetic route joins two liquids and ends with a dry crystal. The reaction gives off a lot of heat, and a well-designed plant uses it to evaporate water instead of paying for steam.
- Receiving ammonia and acid
Liquid ammonia is held in a pressure bullet and vaporised as needed; 98% sulphuric acid is stored in mild steel tanks and dosed by pump.
- Neutralisation in the saturator
Ammonia gas and acid meet in circulating liquor, and the heat of reaction drives off part of the water.
- Crystallisation
The saturated liquor circulates through an evaporator crystalliser, where crystal size is set by residence time and liquor acidity.
- Centrifuging
A pusher centrifuge separates the crystals, which leave with about 1–2.5% moisture, and returns the mother liquor to the crystalliser.
- Drying and scrubbing
A rotary dryer takes moisture below the 1% limit; its exhaust carries almost all the plant's dust and goes through a cyclone and wet scrubber.
- Screening and coating
Crystals are screened into coarse and fine fractions and given a light anti-caking coat so they flow after storage.
- Testing and bagging
Each lot is tested for nitrogen, sulphur, moisture and free acidity, then packed in 50 kg HDPE bags.
Which route should a new ammonium sulphate plant use?
Much of the ammonium sulphate on the market is not made on purpose. It is a co-product of plants that have ammonia or acid to dispose of, and that sets the price a new unit has to meet.
| Synthetic (merchant ammonia and acid) | Ammonia and sulphuric acid bought in and reacted in a saturator. Simple to run and gives a clean crystal, but both inputs are paid at market price. This is the route in our sample report. |
|---|---|
| Spent or by-product acid | Uses weak or spent sulphuric acid from a nearby chemical, dye or pickling plant. Cheaper acid, but impurities must be removed and tested so arsenic and colour stay within the fertiliser specification. |
| Caprolactam co-product | Recovered from the caprolactam process in nylon intermediate plants. Large volumes at low cost; this is the main competing supply, not a route for a new standalone unit. |
| Coke oven gas recovery | Ammonia in coke oven gas at steel and coke plants is captured with sulphuric acid. Suits an attached plant at a coke works; crystals are usually not screened and vary in size. |
The route decides the project: a standalone plant on merchant ammonia lives or dies on its ammonia contract. If you can secure spent acid or an ammonia stream nearby, the same machinery earns a much wider margin.
Raw materials: ammonia and sulphuric acid
One tonne of ammonium sulphate takes about 0.26 tonne of ammonia and 0.74 tonne of sulphuric acid by the reaction alone. In our sample report raw materials cost ₹858.77 lakh in Year 3, which is 47.3% of sales.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Anhydrous ammonia | 58% | 498.09 |
| Sulphuric acid 98 percent | 39% | 334.92 |
| Anti-caking agent | 3% | 25.76 |
| Total | 100% | 858.77 |
The sample's raw material share assumes favourable supply. Price both inputs on real quotations for your location before you size the plant.
Machinery for an ammonium sulphate plant
The evaporator crystalliser is the largest single item in our sample. Wetted parts in the saturator, crystalliser and centrifuge need stainless steel or lined construction because hot acidic liquor corrodes mild steel.
| Equipment | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Ammonia storage bullet and vaporiser | Stores liquid ammonia under pressure and feeds gas | 59.69 |
| Acid storage tanks and dosing pumps | Holds and meters sulphuric acid | 34.11 |
| Saturator with circulation pumps | Carries out the neutralisation | 59.68 |
| Evaporator crystalliser with condenser | Grows crystals to size | 85.26 |
| Pusher centrifuge | Separates crystals from liquor | 42.63 |
| Rotary dryer with hot air generator | Brings moisture below 1% | 51.16 |
| Wet scrubber and cyclone | Catches dryer dust and ammonia | 34.11 |
| Screens, conveyors and bagging machine | Grades, moves and packs product | 34.11 |
| Instrumentation and control panel | Controls pH, level and temperature | 25.58 |
| Total plant and machinery | 426.33 | |
Costs are the sample report's estimates for a 33 MT per day plant. Get current quotations before you finalise.
Manpower and power for a 33 MT per day plant
The plant runs round the clock in three shifts, so the operator count is higher than daily output suggests. Power and fuel for pumps, the centrifuge and the dryer's hot air generator cost ₹151.26 lakh in Year 3 of our sample, or 8.3% of sales.
| Category | Number | Monthly wage (₹) |
|---|---|---|
| Management, supervision and administration | 7 | 32,500 |
| Skilled workers and operators | 17 | 20,500 |
| Semi-skilled and unskilled workers | 25 | 13,500 |
| Total (Year 1 cost ₹109.62 lakh) | 49 |
Licences and standards for ammonium sulphate
| Pollution board consent | Consent to establish and operate from the State Pollution Control Board. "Fertilizer (basic) (excluding formulation)" is in the CPCB Red category. |
|---|---|
| Fertiliser specification | Schedule I of the Fertiliser (Control) Order, 1985: ammoniacal nitrogen at least 20.6%, sulphur at least 23%, moisture up to 1.0%, free acidity up to 0.025% (0.04% for product from by-product ammonia and gypsum), arsenic up to 0.01%. |
| BIS standard | IS 826:2018, Ammonium sulphate, fertilizer grade (third revision). |
| Ammonia storage | PESO licence under the Static and Mobile Pressure Vessels (Unfired) Rules, 2016 to store ammonia in a pressure vessel (Form LS-1A or LS-1B). |
| Business registration | Udyam and GST registration; factory licence and fire NOC as per state rules. |
Checked October 2026. Rules and forms change; confirm with the state department and PESO before applying.
Who buys ammonium sulphate in India?
Farm demand is seasonal and runs through dealers, peaking before kharif and rabi sowing. Ammonium sulphate supplies sulphur as well as nitrogen, which is why it is used on paddy, tea, sugarcane and oilseeds, and as a base for NPK mixtures.
Industrial buyers are smaller but steadier. They want a clean, free-flowing crystal with tight limits on moisture and free acidity, and they reorder from a supplier whose lots stay consistent.
- Fertiliser dealers and distributors
- NPK and fertiliser mixture manufacturers
- Tea, sugarcane and plantation estates
- Yeast, fermentation and biotech units
- Fire retardant and water treatment formulators
- Chemical traders
Subsidy status: ammonium sulphate was added to the Nutrient Based Subsidy scheme for Rabi 2025-26 at ₹9,479 per tonne. Treat it as upside until the Department of Fertilizers confirms your plant can claim it.
Mistakes that weaken an ammonium sulphate project report
- Pricing ammonia without a supply contract
Ammonia is the largest cost and its price swings with gas prices. A report built on one spot quote overstates margin and DSCR.
- Comparing with retail fertiliser prices
Your plant competes with co-product and imported material sold in bulk. Revenue should use the ex-factory price buyers pay you, not the bag price at a dealer.
- Not testing spent acid
Cheap acid can carry organics, iron or arsenic. If the crystal fails the 0.01% arsenic limit or turns dark, it cannot be sold as fertiliser.
- Undersizing the dryer scrubber
The dryer exhaust carries nearly all of the plant's dust. A weak scrubber costs consent and product.
- Counting the subsidy as revenue
NBS eligibility is decided by the government, not the bank. Show it, if at all, as a separate upside case.
How NPCS helps you plan an ammonium sulphate plant
- Route and capacityCompare merchant ammonia, spent acid and attached by-product routes for your site.
- Raw material balanceAmmonia and acid consumption, losses and the price at which the plant still repays.
- Lender-ready project reportProjections, DSCR, sensitivity to ammonia price and working capital for your bank.
- Approvals and layoutPlant layout, PESO storage, pollution consent and the FCO and BIS requirements.
NPCS has prepared project reports and feasibility studies since 1994, and its client list records 269 assignments in specialty chemicals for entrepreneurs, banks and companies in India and abroad.
What's inside the ammonium sulphate sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
18 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Find NPCS project reports in your budget
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Ammonium Sulphate project report: frequently asked questions
What is the cost of an ammonium sulphate manufacturing plant in India?
A synthetic plant of 20–35 MT per day needs roughly ₹6–10 crore including land, building, machinery and working capital margin, and a 10 MT per day unit about ₹3–5 crore. These ranges are indicative. Our sample report models a 33 MT per day plant at ₹916.69 lakh, of which ₹426.33 lakh is plant and machinery.
How much ammonia and sulphuric acid does one tonne of ammonium sulphate need?
By the reaction itself, one tonne of ammonium sulphate needs about 0.26 tonne of ammonia and 0.74 tonne of sulphuric acid on a 100% basis. Real plants use a little more of each because of handling and scrubber losses. Ammonia is the costlier input, which is why it is 58% of raw material cost in our sample report.
What nitrogen and sulphur content must fertiliser grade ammonium sulphate have?
Schedule I of the Fertiliser (Control) Order, 1985 sets at least 20.6% ammoniacal nitrogen and 23% sulphur. Moisture may be up to 1.0%, free acidity up to 0.025% as sulphuric acid and arsenic up to 0.01%. Fertiliser grade product is also covered by BIS standard IS 826:2018.
Is ammonium sulphate covered under the fertiliser subsidy?
Yes. The government added ammonium sulphate, domestic and imported, to the Nutrient Based Subsidy scheme for Rabi 2025-26, at ₹9,479 per tonne for the 20.5-0-0-23 grade. Whether a new plant can claim it depends on the Department of Fertilizers, so keep it out of your projections until it is confirmed in writing.
Is an ammonium sulphate plant profitable?
In our illustrative sample, a 33 MT per day plant selling at ₹23,800 per MT earns a 29% return on investment in Year 3. It breaks even at about 33% of capacity and pays back in about 2.9 years. Real profit depends mostly on the price you pay for ammonia and acid and on how close you sell.
Is the sample report free and can I use it for a bank loan?
The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report. Its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own route, capacity, location and lender.
Sources and references
- Supporting balanced fertilization: Nutrient-Based Subsidy rates for Rabi 2025-26Press Information Bureau, Government of India, checked Oct 2026
- Cabinet approves NBS rates for Kharif 2026 on P&K fertilizersPrime Minister's Office, Government of India, checked Oct 2026
- The Fertiliser (Control) Order, 1985Department of Agriculture, Government of Odisha, checked Oct 2026
- IS 826:2018 Ammonium sulphate, fertilizer grade: SpecificationBureau of Indian Standards, checked Oct 2026
- SMPV(U) Rules, 2016: frequently asked questionsPetroleum and Explosives Safety Organisation, checked Oct 2026
- Categorization of industrial sectors under Red as per CPCB criteriaState Pollution Control Board, Odisha, checked Oct 2026
- AP-42 Section 8.4: Ammonium sulfateUnited States Environmental Protection Agency, checked Oct 2026
