WhatsApp us
Request a Quote

Project reports in Adhesives and Resins

Alkyd Resin Manufacturing Project Report

Plant cost, reactor and machinery, raw materials and five-year profitability for an alkyd resin unit, with a free sample report PDF you can open now.

Also known as: alkyd, polyester alkyd resin

Plant capacity
3,600 kg per day
Total project cost
₹428 lakh
Plant and machinery
₹218 lakh
Return on investment
14% (Year 3)
Break-even
48% of capacity
Payback period
About 4.6 years

Figures from our illustrative sample report for a typical unit. They show the format of an NPCS report and are not quotes for your project.

What is a alkyd resin project report?

An alkyd resin project report is a detailed project report (DPR) for a plant that makes the binder used in enamel paints and primers. The plant cooks vegetable oil or fatty acids with a polyol and phthalic anhydride. The report sets out the process, reactor and machinery, raw materials, buyers, project cost, finance, five-year projections, DSCR and break-even.

Resin makers and paint companies use it to size the reactor and raise a term loan. Banks use it to judge whether thin resin margins can cover the instalments.

Also known as: alkyd, polyester alkyd resin.

What a bank checks in an alkyd resin project report

Resin plants turn a lot of money through raw materials and keep a small slice as profit. A credit officer will test these four numbers first; the values are the ones used in our sample report.

67.5%Raw material share of sales

Oil, phthalic anhydride and solvent take two thirds of every rupee of sales. A report that shows much less is usually pricing raw materials from an old quotation.

38%Oils and fatty acids in raw material cost

Soya, linseed and other vegetable oil prices swing with crop and import duty changes. The report should test what a rise in oil prices does to profit and repayment.

1.22Lowest DSCR, in Year 2

The debt service coverage ratio (cash available for each rupee of loan instalment) dips when the moratorium ends. Lenders look at the weakest year, not only the 1.39 average.

45 daysCredit given to paint makers

Paint companies rarely pay on delivery. Debtors are the largest current asset in the sample, so they set the size of the cash credit limit.

Values are the assumptions in our illustrative sample. Your report uses figures for your capacity, grades and buyers.

What does an alkyd resin manufacturing plant cost in India?

Cost is set mainly by reactor size and the number of batches you can cook in a day. Solvent storage and a thermic fluid heater are needed at every scale, so a very small plant costs more per kg than a mid-size one.

Small unit

₹50–120 lakh

About 500–1,000 kg per day, one reactor

  • Machinery₹30–60 lakh
  • Shed and fit-out (or rent)₹10–35 lakh
  • Working capital margin₹8–20 lakh

MSME term loan; PMEGP only within its ₹50 lakh limit

Mid-size unit

₹2–3.5 crore

About 1,500–2,500 kg per day

  • Machinery₹1–1.6 crore
  • Land and building₹50–90 lakh
  • Working capital margin₹20–35 lakh

MSME term loan, often with CGTMSE cover

Our sample report

Larger unit

₹428 lakh

3,600 kg per day, 11,88,000 kg per year

  • Plant and machinery₹218 lakh
  • Land and building₹113 lakh
  • Working capital margin₹38 lakh

Term loan ₹321 lakh (75%), promoter ₹107 lakh

Small and mid-size ranges are indicative and exclude land unless stated. Costs vary with reactor material, automation and location.

Profit and repayment in an alkyd resin plant

The sample report models a 3,600 kg per day unit working 330 days a year. It starts at 60% of capacity and reaches 80% in Year 5. Resin is sold at ₹136 per kg, ex-GST, and plant and machinery is about half of the project cost.

₹428 lakhTotal project cost
₹1,131 lakhSales in Year 3
₹58 lakhNet profit in Year 3
1.39Average DSCR
Alkyd resin project cost (₹ lakh)
Land and site development25.53
Building and civil works87.20
Plant and machinery218.01
Other fixed assets34.47
Contingencies15.26
Preliminary and pre-operative9.51
Working capital margin38.36
Total428.34
Means of finance (₹ lakh)
Promoter's contribution (25%)107.08
Term loan from bank (75%)321.26
Cash credit limit (separate)115.10
Total project cost428.34

Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.

Alkyd resin manufacturing process

Alkyd is made in batches in a heated, stirred reactor. Plants that start from oil use the alcoholysis (monoglyceride) route. Plants that buy fatty acids skip that stage and control the resin more tightly, but pay more for raw material.

  1. Charging under inert gas

    Oil or fatty acid and the polyol go into the reactor with a nitrogen or inert gas blanket, which keeps the colour light.

  2. Alcoholysis

    On the oil route, the batch is heated to about 230–250°C with a catalyst until a methanol tolerance test shows the oil has turned into monoglyceride.

  3. Esterification

    Phthalic anhydride is added and the batch is cooked at about 220–240°C, with a little xylene refluxing to carry reaction water out to the separator.

  4. Cook control

    Samples are tested often for acid value and viscosity, and the cook stops at the target. A batch cooked too long can gel in the reactor.

  5. Thinning

    The hot resin is dropped into a thinning tank of mineral turpentine oil or xylene and stirred to the set solids, commonly sold as 50–70% resin in solvent.

  6. Filtration and filling

    The thinned resin is filtered to remove gel specks and haze, checked for solids, viscosity, colour and acid value, and filled in drums.

Raw materials for alkyd resin

Oils and fatty acids are the largest item, followed by solvent and phthalic anhydride. In the sample, raw materials cost ₹763.64 lakh in Year 3, or 67.5% of sales.

Raw materialShare of costYear 3 (₹ lakh)
Vegetable oils and fatty acids38%290.18
Mineral turpentine oil and xylene24%183.27
Phthalic anhydride22%168.00
Pentaerythritol and glycerine12%91.64
Catalysts and additives4%30.55
Total100%763.64

The oil decides the grade: linseed and soya oil give air-drying resins, while coconut or castor oil give non-yellowing short oil grades for stoving. Your report should price the oils your target grades need, not a single average oil.

Machinery for an alkyd resin plant

The stainless steel reactor is the largest single item. Heating, condensing and solvent handling around it cost more than the reactor itself.

MachineWhat it doesSample cost (₹ lakh)
Stainless steel resin reactor with stirrerHolds and stirs the batch through the cook65.41
Thermic fluid heaterHeats the reactor jacket to about 250°C30.52
Thinning tank with stirrerDilutes the hot resin in solvent26.16
Oil and solvent storage tanksStore oils, mineral turpentine and xylene21.80
Cooling tower, pumps and pipingCool condensers and move liquids21.80
Condenser and water separatorRecover xylene and remove reaction water17.44
Resin filter pressRemoves gel particles before filling13.08
Quality control laboratoryAcid value, viscosity, solids and colour tests13.08
Inert gas systemBlankets the batch to protect colour8.72
Total plant and machinery218.01

Costs are the sample report's estimates for a 3,600 kg per day plant. Get current quotations before you finalise.

Alkyd resin grades and who buys them

Alkyd is the main binder in solvent-based enamel paints, so demand follows housing, repainting, furniture and light engineering. Buyers order by grade, and the grade is set by oil length, the share of oil in the resin.

  • Long oil grades for decorative enamels, brushing paints and wood varnishes, bought by decorative paint makers
  • Medium oil grades for quick-drying industrial enamels, metal primers and machinery paints
  • Short oil grades for stoving enamels cured with melamine or urea resin, used on appliances and steel furniture
  • Modified grades such as urethane, styrenated or water-reducible alkyds for specialty coatings and inks
  • Resin traders who supply small paint units that cannot buy full tankers or many drums at once

Where a new unit wins: regional paint makers want the same viscosity, colour and drying time in every drum. A nearby unit that holds that consistency and can cook a customer's own formula often wins over a cheaper supplier further away.

Licences and approvals for an alkyd resin unit

Hot oil, flammable solvent and a reactor running at 250°C put a resin plant under closer scrutiny than a paint mixing unit. Plan for these approvals early, as of October 2026.

Business registrationUdyam (MSME) registration and GST registration
Pollution board consentConsent to establish and operate from the State Pollution Control Board. Synthetic resins are listed in the red category, for example by the Maharashtra board; check your state's list
Solvent storageMineral turpentine and xylene are petroleum under the Petroleum Rules, 2002. Storing 2,500 litres or more of Class B petroleum (flash point 23–65°C) needs a PESO licence
Factory and fireFactory licence where the worker threshold applies, and a fire NOC for the solvent and thermic fluid areas; rules vary by state
Quality testingIS 354 (Part 2): 2024 sets the BIS test methods for alkyd resins, the usual basis for buyer specifications

Mistakes that weaken an alkyd resin project report

  • Mixing up solids and solution prices

    Resin is sold thinned in solvent. If sales are priced per kg of solution and costs per kg of solid resin, profit comes out far too high.

  • Assuming every batch passes

    Reaction water leaves the batch, and an over-cooked batch can gel in the reactor. Yield and an allowance for rejected batches belong in the projections.

  • Leaving out solvent storage approvals

    A PESO licence, fire NOC and safe tank farm take time and money. Projects that skip them often face delays before commercial production.

  • Pricing one oil for every grade

    Linseed, soya and castor oil prices move differently. Using one average price hides how the product mix changes margin.

  • Under-sizing the cash credit limit

    With 45 days of credit to paint makers and a month of oil stock, working capital is large. A small limit leaves the reactor idle in the first year.

How NPCS helps you set up an alkyd resin plant

  • Grades and reactor sizeChoose long, medium or short oil grades and a batch size that suits your buyers.
  • Formulation and process routeCompare the oil and fatty acid routes and the raw materials each grade needs.
  • Bank-ready project reportProjections, DSCR and working capital in the format your lender wants.
  • Layout and approvalsReactor house, tank farm and solvent storage layout, with the approvals list for your state.

NPCS's client list shows 64 assignments in adhesives, resins and polymers, including a feasibility report on alkyd resins. The work is done by the NPCS project team, led by founder Ajay Kumar Gupta.

What's inside the alkyd resin sample report

  1. Introduction
  2. Uses and applications
  3. Market potential
  4. Manufacturing process
  5. Raw materials
  6. Plant and machinery
  7. Land, building and utilities
  8. Manpower
  9. Licences and approvals
  10. Project cost and means of finance
  11. Working capital
  12. Projected profitability
  13. Cash flow statement
  14. Projected balance sheet
  15. Depreciation
  16. Term loan repayment
  17. Debt service coverage
  18. Break-even analysis
  19. Financial ratios
  20. Key assumptions
  21. Conclusion
  22. Monthly loan repayment schedule

19 pages, five-year projections, illustrative figures.

Open sample report

Free sample or a report for your project?

What you getFree sampleNPCS report for your project
Capacity and locationTypical unitYour capacity, site and state
FiguresIllustrativeBuilt on current prices and quotations
Machinery suppliers and quotationsNoYes
Market survey for your regionNoYes
Bank or scheme format (PMEGP, term loan)NoYes
Use for a loan applicationNoYes

Real NPCS alkyd resin project reports

These are alkyd resin project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.

Project reportPlant capacityTotal investmentRate of returnBreak-evenAction
Alkyd Resin5 MT/day₹7.76 crore46%44% Get this report
Resin for Nail Polish (Polycondensation Resin (Polyester, Alkyds), Epoxy Tosylamide Resin, Solvent Based…10 MT/day₹13.18 crore50%31% Get this report

Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.

Find other projects that fit your budget Search NPCS project profiles by investment, return and break-even, the same search as our Startup Selector.

What clients say about NPCS

4.7

264 Google reviews, as of 20 Oct 2026

Clients most often mention

  • feasibility reports 18
  • project report 16
  • helpful for startups 15
  • detailed reports 8
Read all reviews on Google
  • Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.

    Piyush Singh, Google review, 2026

  • Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended

    Saroj Yadav, Google review, 2026 View on Google

  • In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.

    Shrishti Gautam, Google review, 2026

  • NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.

    Raj Yadav, Google review, 2026

Alkyd Resin project report: frequently asked questions

How much does it cost to set up an alkyd resin manufacturing plant in India?

A small unit with one reactor needs roughly ₹50–120 lakh, and a 1,500–2,500 kg per day plant about ₹2–3.5 crore, including building and working capital margin. Our sample report models a 3,600 kg per day unit at ₹428 lakh. These are indicative figures; the cost for your project depends on reactor size, solvent storage, land and location.

What raw materials are used to make alkyd resin?

Vegetable oil or fatty acids, a polyol such as pentaerythritol or glycerine, and phthalic anhydride make the resin, which is then thinned in mineral turpentine oil or xylene. In our sample report oils and fatty acids are 38% of raw material cost, solvents 24% and phthalic anhydride 22%, with catalysts and additives making up the rest.

What is the difference between long oil, medium oil and short oil alkyd?

The difference is the share of oil in the resin. Long oil grades carry the most oil, dry in air and brush well, so they suit decorative enamels and varnishes. Medium oil grades dry faster for industrial enamels and primers. Short oil grades hold the least oil and are baked with amino resins in stoving enamels.

Is alkyd resin manufacturing profitable?

It can be, but margins are thin. In our illustrative sample, a 3,600 kg per day unit earns a 14% return on investment in Year 3. It breaks even at 48% of capacity and pays back in about 4.6 years. Profit depends on oil and phthalic anhydride prices, batch yield, solvent losses and how long paint makers take to pay.

Can I get a PMEGP or Mudra loan for an alkyd resin unit?

Only for a very small unit. PMEGP covers manufacturing projects up to ₹50 lakh, with a subsidy of 15–35% of project cost, and Mudra Tarun Plus lends up to ₹20 lakh. Most resin plants cost more, so they take an MSME term loan, often with CGTMSE guarantee cover up to ₹10 crore for eligible micro and small units.

What is alkyd resin used for?

Alkyd resin is the binder in most solvent-based enamel paints. It goes into synthetic enamels for doors, grills and furniture, metal primers, machinery and agricultural equipment paints, wood varnishes, stoving enamels for appliances and some printing inks. The oil in the resin reacts with air as the film dries, which gives a hard, glossy coat.

Is the sample report free and can I use it for a bank loan?

The sample is free to view and download. It is an illustrative alkyd resin project report PDF that shows the format and depth of an NPCS report. Its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, grades and location.

Sources and references

  1. Categorisation of industries: red category list (Synthetic resins, entry 78)Maharashtra Pollution Control Board, checked Oct 2026
  2. Revised FAQs on the Petroleum Rules, 2002Petroleum and Explosives Safety Organisation (PESO), checked Oct 2026
  3. Requirement of licence under the Petroleum Rules, 2002 for storage of petroleumPetroleum and Explosives Safety Organisation (PESO), checked Oct 2026
  4. IS 354 (Part 2): 2024, Resins for paints: methods of sampling and test, special test methods for alkyd resinsBureau of Indian Standards, checked Oct 2026
  5. Prime Minister's Employment Generation Programme (PMEGP)Bank of India, checked Oct 2026
  6. Pradhan Mantri Mudra Yojana: Tarun Plus categoryPress Information Bureau, Government of India, checked Oct 2026
  7. Credit Guarantee Fund Trust for Micro and Small EnterprisesCGTMSE, checked Oct 2026

Recommended reading on alkyd resin

Ajay Kumar Gupta, founder of NPCS

Who prepares NPCS reports

The NPCS project team, led by Ajay Kumar Gupta

This page and its sample report are prepared and reviewed by the NPCS project team, which has written techno-economic feasibility studies and detailed project reports since 1994.

Ajay Kumar Gupta founded Niir Project Consultancy Services (NPCS) and leads the organisation. With 40 years of experience in MSME project consulting, he has built the team that has delivered more than 28,000 project reports for clients worldwide, helping entrepreneurs plan and finance profitable manufacturing businesses.

Ajay Kumar Gupta on LinkedIn

Published
Last updated
Next review
Oct 2027
Reviewed by
NPCS project team

This page is reviewed every 12 months, or sooner when scheme limits, GST rates, BIS rules or pollution categories change. The sample report is illustrative: its figures are generated from industry-typical ratios for a unit of this size, checked so every statement balances, and are not taken from any client project.

Planning a different adhesives and resins project?

These are a few of the projects we advise on. NPCS's published client list records 64 adhesives and resins assignments, so tell us what you are planning.

Tell us your project

Recent adhesives and resins assignments

  • Mohammad Younes
    Project Planning and Feasibility Report on Gums and StabilizersEastern lebanon, 2026
  • Alka Pump & Spares
    Comprehensive Market Research Report on Nicotine for pharmaceutical and nicotine gum useHyderabad, 2025
  • Lummus Novolen Technology GmbH
    Project Feasibility Report on Super Absorbent Polymer for Industrial ApplicationsGermany, 2025
  • Kejriwal Geotech Pvt. Ltd
    Techno-Economic Project Report on Epoxy resinSurat, 2024
  • Thermax Limited Chemical Divison
    Project Feasibility Report on Manufacturing absorbent polymers for Industrial ApplicationsBharuch, 2024
  • Mahavir Enterprises
    Techno-Economic Feasibility Report on Chlorinated Polyvinyl ChlorideJalandhar, 2023
  • Techbond
    Industrial Project Report on Adhesives FormularyMalaysia, 2023
  • Paschal Ugochukwu
    Technical and Financial Feasibility Report on Guidelines on Alkyd ResinsDenmark, 2023

Get a alkyd resin project report for your plant

Tell us your planned capacity, location and loan scheme. Our team will confirm the scope and price of a report built on current machinery quotations and raw material prices for your region.

Reports are prepared in the format banks and PMEGP offices ask for, with five-year projections, DSCR and break-even.

Request a Alkyd Resin Project Report

Share your plan and our team will call you back within 24 hours.

Start with the sample, then plan your own unit

Open the free alkyd resin sample report to see the format, then talk to NPCS about a report for your capacity and location.

Sample PDF WhatsApp
Alkyd Resin sample project report (illustrative) Download New tab

Illustrative sample. Figures are representative and not from a real project.

Call Us WhatsApp