WhatsApp us
Request a Quote

Project reports in Specialty Chemicals

Activated Carbon Powder from Jute Sticks Plant Project Report

Plant cost, kiln and machinery, jute stick sourcing and five-year profitability for a powdered activated carbon plant, with a free sample report to open now.

Also known as: jute stick activated carbon

Plant capacity
4.6 MT per day
Total project cost
₹427 lakh
Plant and machinery
₹218 lakh
Return on investment
19% (Year 3)
Break-even
41% of capacity
Payback period
About 3.9 years

Figures from our illustrative sample report for a typical unit. They show the format of an NPCS report and are not quotes for your project.

What is a activated carbon powder from jute sticks project report?

An activated carbon powder from jute sticks project report is a detailed project report (DPR) for a plant that turns waste jute sticks into fine activated carbon. The plant chars the sticks, activates the char with steam and grinds it. The report covers the process, machinery, stick sourcing, project cost, means of finance, five-year projections, DSCR and break-even.

Promoters in the jute belt use it to size the plant and raise a term loan; lenders and investors use it to judge whether the plant can repay.

Also known as: jute stick activated carbon.

Activated carbon from jute sticks: plant cost and economics

Our sample report models a plant making 4.6 metric tonnes of powdered activated carbon per day, or 1,518 MT per year over 330 working days. It starts at 60% of capacity and reaches 80% in Year 5, selling at ₹69,000 per MT ex-factory.

₹427 lakhTotal project cost
₹733 lakhSales in Year 3
₹80 lakhNet profit in Year 3
1.66Average DSCR
Cost of project (₹ lakh)
Land and site development35.85
Building and civil works99.87
Plant and machinery217.96
Other fixed assets23.10
Contingencies15.89
Preliminary and pre-operative9.82
Working capital margin24.16
Total426.65
Means of finance (₹ lakh)
Promoter's contribution (25%)106.66
Term loan from bank (75%)319.99
Cash credit limit (separate)72.48
Total project cost426.65

Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. DSCR (debt service coverage ratio, cash available to repay divided by repayment due) is lowest at 1.45 in Year 2. All figures are illustrative.

Activated carbon powder from jute sticks manufacturing process

Jute sticks are light, low in ash and already porous, so they char quickly and activate at a lower steam load than dense shells. The sample plant follows the steam activation route in seven stages.

  1. Drying and chopping

    Sticks are dried to low moisture and chopped into short lengths, because wet or long sticks bridge in the feed hopper and char unevenly.

  2. Carbonisation

    The chopped sticks are heated in a retort with little air; volatile matter leaves as gas, which can be burnt to heat the retort, and a light char remains.

  3. Steam activation

    The char moves through a rotary kiln at about 850–950 °C while steam reacts with it and opens up the micropores that give the carbon its adsorbing power.

  4. Acid washing

    Activated char is washed in dilute hydrochloric acid and rinsed to remove ash and iron, then the wash water is neutralised with soda ash.

  5. Drying

    A rotary dryer brings the washed carbon down to the moisture limit the buyer sets.

  6. Pulverising and classifying

    A pulveriser with an air classifier grinds the carbon to fine powder and returns oversize particles for regrinding.

  7. Testing and packing

    Each lot is tested for iodine value, methylene blue value, ash, moisture and particle size, then packed in lined HDPE bags.

Steam activation or chemical activation for jute sticks?

Laboratory work on jute sticks has used both routes. The choice decides the kiln, the effluent you handle and the pollution category, so settle it before the project report is written.

Steam (physical) activationChar is activated with steam in a rotary kiln at high temperature. No chemical is recovered, effluent is mainly acid wash water, and the CPCB lists it as Orange. This is the route in our sample report.
Chemical activationRaw or partly charred sticks are soaked in an activating agent such as phosphoric acid, zinc chloride or potassium hydroxide and heated at a lower temperature. It can give a high surface area but needs chemical recovery and more effluent treatment.
Buying char insteadSome units buy jute stick char from charcoal makers and only activate, wash and grind it. This cuts the retort out of the project cost but ties quality to an outside supplier.
Product quality reachedCSIR-National Physical Laboratory lists a jute stick carbon with a BET surface area of 1,600–2,000 square metres per gram and ash below 5%, which shows the material can reach high grades.

Jute sticks and other raw materials

Jute sticks are the woody core left after the fibre is stripped, and they are plentiful in the eastern jute-growing states. They come to market once a year after the jute harvest, so a plant has to buy and store most of its year's need within a few months.

Raw material cost in the sample report, Year 3
Raw materialShare of costYear 3 (₹ lakh)
Dry jute sticks (delivered)84%302.62
Hydrochloric acid for ash washing11%39.63
Soda ash for neutralising5%18.01
Total100%360.26

Raw materials are 49.1% of sales in the sample. Yield is the main driver: as an indicative figure, about 7–8 tonnes of dry sticks go into each tonne of product.

Machinery for a jute stick activated carbon plant

The rotary steam activation kiln is the largest single item in the sample, followed by the carbonisation retort. Together they are almost half of the machinery cost.

MachineWhat it doesSample cost (₹ lakh)
Chopper and feed conveyorCuts sticks to length and feeds the retort15.26
Continuous carbonisation retortChars sticks with little air43.59
Rotary steam activation kilnActivates the char with steam61.03
Steam boiler with waste heat recoverySupplies process steam using hot kiln gases26.15
Acid washing and rinsing tanksRemove ash and iron15.26
Rotary dryerDries the washed carbon17.44
Pulveriser with air classifierGrinds to the required mesh21.79
Bag filter and wet scrubberCapture carbon dust and kiln gases10.90
Bag filling and stitching machinePacks the finished powder6.54
Total plant and machinery217.96

Costs are the sample report's estimates for a 4.6 MT per day line. Get current quotations before you finalise.

Utilities, storage and manpower

A jute stick plant needs far more covered storage than its output suggests, because sticks are bulky and arrive in one season.

Power and fuel₹56.68 lakh in Year 3 in the sample, 7.7% of sales. Retort off-gas and kiln waste heat cut the fuel bill when they are used well.
SteamNeeded continuously in the activation kiln, from a boiler that must be registered before use
WaterFor acid washing, rinsing, boiler feed and the scrubber; rinse water is neutralised before discharge or reuse
StorageA dry, covered yard for baled sticks, with fire protection, plus a closed store for acid
Manpower23 people in the sample: 3 in management and supervision, 8 skilled operators and 12 semi-skilled and unskilled workers, costing ₹50.82 lakh in Year 1

Licences, pollution category and standards

Pollution categoryActivated carbon manufacturing with steam activation is Orange in the CPCB classification of January 2025. Consent to establish and consent to operate come from the State Pollution Control Board.
BoilerThe steam boiler must be registered under the Boilers Act, 2025 before it is used
Product standardIS 8366 covers powdered activated carbon in three types: for oils and fats, for sugar solutions and for pharmaceuticals. A second revision was circulated in draft in October 2024.
Test methodsIS 877:2024 sets the methods of sampling and test for powdered and granular activated carbon
Business registrationUdyam (MSME) and GST registration, factory licence and fire NOC as your state requires

Who buys powdered activated carbon from jute sticks?

Powdered carbon is dosed into a liquid and filtered out, so buyers are processors that remove colour, odour or traces of impurity. A plant in the jute belt sits next to its raw material and close to sugar, oil and water treatment buyers in eastern India.

  • Municipal and industrial water and effluent treatment plants
  • Sugar mills and refineries, for syrup decolourising
  • Edible oil refineries, for bleaching
  • Pharmaceutical and fine chemical makers
  • Ink, battery and fireworks makers
  • Chemical traders and exporters

How a new plant wins orders: buyers approve a carbon only after trial lots in their own process. Steady iodine value, methylene blue value, ash and mesh from lot to lot matter more than the lowest price.

Mistakes that weaken an activated carbon from jute sticks project report

  • Treating sticks as free waste

    Villages burn jute sticks as fuel and use them for fencing, so they have a market price that rises once a plant starts buying in bulk.

  • Using a char yield instead of a final yield

    Activation burns off part of the char. A report that applies the charring yield to sales overstates output several times over.

  • One month of stick stock

    Sticks arrive in a few months after harvest. Working capital and storage must cover the months between seasons, or the kiln stands idle.

  • Pricing as if every lot is top grade

    Sugar, oil and drug buyers each set their own limits. Price the grades you can make consistently, not the best laboratory result.

  • Leaving out acid effluent

    Wash water needs neutralising and the kiln needs a scrubber. Missing them raises project cost after the loan is sanctioned.

How NPCS helps you plan a jute stick activated carbon plant

  • Route and grade choiceSteam or chemical activation, and which buyer grades to target first.
  • Stick sourcing planCollection radius, seasonal buying, storage size and the working capital it needs.
  • Kiln and machineryRetort, kiln, boiler and grinding options with supplier quotations.
  • Bank-ready project reportYield-based projections, DSCR and break-even in the format your lender wants.

NPCS's published client list shows 269 assignments in specialty chemicals. The NPCS team, led by founder Ajay Kumar Gupta, has prepared project reports and feasibility studies for chemical plants since 1994.

What's inside the activated carbon powder from jute sticks sample report

  1. Introduction
  2. Uses and applications
  3. Market potential
  4. Manufacturing process
  5. Raw materials
  6. Plant and machinery
  7. Land, building and utilities
  8. Manpower
  9. Licences and approvals
  10. Project cost and means of finance
  11. Working capital
  12. Projected profitability
  13. Cash flow statement
  14. Projected balance sheet
  15. Depreciation
  16. Term loan repayment
  17. Debt service coverage
  18. Break-even analysis
  19. Financial ratios
  20. Key assumptions
  21. Conclusion
  22. Monthly loan repayment schedule

19 pages, five-year projections, illustrative figures.

Open sample report

Free sample or a report for your project?

What you getFree sampleNPCS report for your project
Capacity and locationTypical unitYour capacity, site and state
FiguresIllustrativeBuilt on current prices and quotations
Machinery suppliers and quotationsNoYes
Market survey for your regionNoYes
Bank or scheme format (PMEGP, term loan)NoYes
Use for a loan applicationNoYes

Real NPCS activated carbon powder from jute sticks project reports

These are activated carbon powder from jute sticks project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.

Project reportPlant capacityTotal investmentRate of returnBreak-evenAction
Activated Carbon Powder from Jute SticksActivated Carbon Powder:50 MT/Day₹7.29 crore29%57% Get this report

Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.

Find other projects that fit your budget Search NPCS project profiles by investment, return and break-even, the same search as our Startup Selector.

What clients say about NPCS

4.7

264 Google reviews, as of 20 Oct 2026

Clients most often mention

  • feasibility reports 18
  • project report 16
  • helpful for startups 15
  • detailed reports 8
Read all reviews on Google
  • Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.

    Piyush Singh, Google review, 2026

  • Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended

    Saroj Yadav, Google review, 2026 View on Google

  • In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.

    Shrishti Gautam, Google review, 2026

  • NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.

    Raj Yadav, Google review, 2026

Activated Carbon Powder from Jute Sticks project report: frequently asked questions

What is the cost of an activated carbon from jute sticks plant in India?

Our sample report models a 4.6 MT per day plant at ₹426.65 lakh, including ₹217.96 lakh of plant and machinery, land, building and working capital margin. A plant buying char instead of making it costs less. These are illustrative figures; your project report works out the cost for your capacity, site and kiln supplier.

How is activated carbon made from jute sticks?

Dry jute sticks are chopped and charred in a retort with little air. The char is then activated with steam in a rotary kiln at about 850 to 950 degrees Celsius. It is washed with dilute acid to cut ash, dried and ground to fine powder. Each batch is tested for iodine value, methylene blue value, ash and moisture.

How many tonnes of jute sticks make one tonne of activated carbon?

As an indicative planning figure, about 7 to 8 tonnes of dry jute sticks give one tonne of steam-activated powder. Most of the stick leaves as volatile matter during charring, and part of the char burns off in activation. Your actual yield depends on stick moisture, kiln temperature and the activity grade you sell.

Is a jute stick activated carbon business profitable?

In our illustrative sample, a 4.6 MT per day plant earns a 19% return on investment in Year 3. It breaks even at 41% of capacity and pays back in about 3.9 years. Real profit depends mostly on the delivered price of sticks, kiln fuel use, yield and how many buyers approve your grade.

Which pollution category applies to an activated carbon plant?

The CPCB classification of January 2025 lists activated carbon manufacturing with steam activation in the Orange category. A plant using a chemical activating agent should confirm its category with the State Pollution Control Board before planning, because effluent and emission conditions change with the route. Consent to establish is needed before construction starts.

What is the difference between jute stick charcoal and activated carbon?

Jute stick charcoal is char made by burning sticks with little air, sold mainly as a powder for inks, fireworks and similar uses. Activated carbon goes one step further: the char is activated with steam or a chemical so it develops a large internal pore surface that adsorbs colour, odour and impurities. Activated carbon needs a kiln and sells at a higher price.

Is the sample report free and can I use it for a loan?

The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report. Its figures are representative and not based on a real project, so do not submit it to a bank. For a loan, NPCS prepares a report for your own capacity, location and lender.

Sources and references

  1. Classification of sectors into Red, Orange, Green, White and Blue categories (January 2025)Central Pollution Control Board, hosted by Maharashtra Pollution Control Board, checked Oct 2026
  2. Activated carbon from waste biomass jute sticks (technology listing)CSIR-National Physical Laboratory, checked Oct 2026
  3. The Boilers Act, 2025 (Act No. 12 of 2025)Inspectorate of Factories and Boilers, Government of Goa, checked Oct 2026
  4. Draft IS 8366, Activated carbons, powdered: specification (second revision)Bureau of Indian Standards, checked Oct 2026
  5. IS 877:2024, Activated carbons, powdered and granular: methods of sampling and testBureau of Indian Standards, checked Oct 2026
Ajay Kumar Gupta, founder of NPCS

Who prepares NPCS reports

The NPCS project team, led by Ajay Kumar Gupta

This page and its sample report are prepared and reviewed by the NPCS project team, which has written techno-economic feasibility studies and detailed project reports since 1994.

Ajay Kumar Gupta founded Niir Project Consultancy Services (NPCS) and leads the organisation. With 40 years of experience in MSME project consulting, he has built the team that has delivered more than 28,000 project reports for clients worldwide, helping entrepreneurs plan and finance profitable manufacturing businesses.

Ajay Kumar Gupta on LinkedIn

Published
Last updated
Next review
Oct 2027
Reviewed by
NPCS project team

This page is reviewed every 12 months, or sooner when scheme limits, GST rates, BIS rules or pollution categories change. The sample report is illustrative: its figures are generated from industry-typical ratios for a unit of this size, checked so every statement balances, and are not taken from any client project.

Planning a different specialty chemicals project?

These are a few of the projects we advise on. NPCS's published client list records 269 specialty chemicals assignments, so tell us what you are planning.

Tell us your project

Recent specialty chemicals assignments

  • Iiconnic Apparels
    Comprehensive Project Report on SilicaPaurri Garhwal, 2026
  • Parul Industries
    Project Feasibility Report on Nicotine for industrial applicationsValsad, 2026
  • Rich Phytocare Private Limited
    Industrial Project Report on Potassium SchoeniteBodinayakanur, 2026
  • Lakshya Powertech Ltd
    Techno-Economic Project Study on Acoustic PanelsMumbai, 2026
  • Luxury Line Interiors & Furniture
    Project Feasibility Report on Precipitated Silica & Activated Carbon for Industrial ApplicHyderabad, 2026
  • Indian Potash Limited
    Techno-Economic Feasibility Report on Citric AcidCoimbatore, 2026
  • Cecilia Still
    Detailed Project Report on Tall Oil RosinsEurope, 2026
  • Taraka Pamidi
    Technical and Financial Feasibility Report on Silica-, 2025

Get a activated carbon powder from jute sticks project report for your plant

Tell us your planned capacity, location and loan scheme. Our team will confirm the scope and price of a report built on current machinery quotations and raw material prices for your region.

Reports are prepared in the format banks and PMEGP offices ask for, with five-year projections, DSCR and break-even.

Request a Activated Carbon Powder from Jute Sticks Project Report

Share your plan and our team will call you back within 24 hours.

Start with the sample, then plan your own unit

Open the free activated carbon powder from jute sticks sample report to see the format, then talk to NPCS about a report for your capacity and location.

Sample PDF WhatsApp
Activated Carbon Powder from Jute Sticks sample project report (illustrative) Download New tab

Illustrative sample. Figures are representative and not from a real project.

Call Us WhatsApp