What is a acrylic acid from propylene project report?
An acrylic acid from propylene project report is a detailed project report (DPR) for a plant that oxidises propylene with air over two catalyst beds. The product is purified to about 99.5% acrylic acid. The report sets out the process, equipment, raw materials, approvals, project cost, financing, five-year projections, DSCR and break-even.
Promoters and chemical companies use it to test feasibility and raise a term loan; lenders and licensors use it to judge feedstock security and repayment.
Also known as: propenoic acid, prop-2-enoic acid.
Acrylic acid from propylene manufacturing plant cost in India
Our sample report models a 6.5 MT per day plant (2,145 MT per year at full capacity) running 330 days a year. It starts at 60% utilisation and reaches 80% in Year 5, with acrylic acid sold at ₹1,14,000 per MT ex-GST.
| Land and site development | 84.89 |
|---|---|
| Building and civil works | 147.89 |
| Plant and machinery | 348.05 |
| Other fixed assets | 44.34 |
| Contingencies | 24.80 |
| Preliminary and pre-operative | 16.25 |
| Working capital margin | 56.70 |
| Total | 722.92 |
| Promoter's contribution (25%) | 180.73 |
|---|---|
| Term loan from bank (75%) | 542.19 |
| Cash credit limit (separate) | 170.10 |
| Total project cost | 722.92 |
Read the scale with care: the sample is sized to show an NPCS report's format, not a commercial benchmark. IndianOil's acrylic acid unit announced for Dumad, Gujarat is 90 KTA, roughly 270 MT per day at 330 working days. A real project is sized around propylene supply and the licensor's minimum train size.
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments; lowest yearly DSCR 1.57. All sample figures are illustrative.
Acrylic acid from propylene manufacturing process
Commercial plants make acrylic acid by oxidising propylene in two separate catalyst stages, because the best catalyst for each step is different. Both reactions release a lot of heat, which is removed by circulating molten salt and recovered as steam.
- Feed preparation
Liquid propylene is vaporised and mixed with compressed air and steam, with the ratio held outside the flammable range.
- First-stage oxidation
The gas flows through catalyst-filled reactor tubes, where a molybdenum-bismuth oxide catalyst at about 290–340 °C turns propylene into acrolein.
- Second-stage oxidation
Fresh air and steam are added, and a molybdenum-vanadium oxide catalyst at about 230–290 °C oxidises the acrolein to acrylic acid.
- Quench and absorption
The reactor gas is cooled and scrubbed with water containing a polymerisation inhibitor, giving an aqueous acrylic acid solution.
- Extraction and solvent recovery
A solvent pulls acrylic acid out of the water; the solvent is then distilled off and recycled.
- Purification
Vacuum distillation separates acetic acid and heavy ends, giving acid of about 99.5% purity that is stabilised with MEHQ.
- Off-gas treatment and storage
Vent gas is burnt in a thermal oxidiser, and the product goes to temperature-controlled stainless steel tanks for dispatch.
Which acrylic acid process route suits a new plant?
Almost all acrylic acid sold today comes from propylene oxidation, and Indian projects have licensed proven technology rather than developing their own. IndianOil signed with Mitsubishi Chemical Corporation in April 2018 for its acrylic acid and butyl acrylate units.
| Two-stage propylene oxidation | The standard commercial route. Proven catalysts, licensable from several technology owners, and a feedstock available from refineries and crackers |
|---|---|
| Ester grade or glacial grade | Ester-grade acid feeds acrylate ester plants. Superabsorbent polymer makers buy a purer glacial grade, which needs an extra purification step such as crystallisation |
| Single-stage propane oxidation | Uses cheaper propane but has lower yields; not yet a mainstream commercial choice |
| Bio-based routes | Routes from glycerol, lactic acid or sugars are at pilot or demonstration scale and are not bankable for a first plant |
| Older routes | Acetylene carbonylation and acrylonitrile hydrolysis were used in the past and are no longer competitive |
Raw materials for acrylic acid production
Propylene decides the economics. Raw materials come to 60.2% of sales in our sample, and propylene alone is 84% of that. Catalysts are a planned cost too, because both reactor stages are recharged when activity falls.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Propylene | 84% | 866.11 |
| Oxidation catalysts (molybdenum-bismuth and molybdenum-vanadium) | 6% | 61.87 |
| Polymerisation inhibitors (MEHQ and phenothiazine) | 4% | 41.24 |
| Extraction solvent make-up | 3% | 30.93 |
| Process chemicals and nitrogen | 3% | 30.93 |
| Total | 100% | 1,031.08 |
Machinery for an acrylic acid plant
The oxidation reactors are the largest single item in the sample, at ₹97.45 lakh of the ₹348.05 lakh machinery cost. Separation equipment, taken together, costs more than the reactors.
| Equipment | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Two-stage multitubular oxidation reactors | Convert propylene to acrolein, then to acrylic acid | 97.45 |
| Molten salt cooling and steam generation | Removes reaction heat and raises steam | 34.81 |
| Process air compressor and propylene vaporiser | Prepares the reactor feed | 31.32 |
| Quench and absorption column | Collects the acid from the reactor gas | 34.81 |
| Solvent extraction and recovery columns | Separate acid from water and recycle solvent | 45.25 |
| Vacuum purification distillation columns | Bring the acid to final purity | 41.77 |
| Waste gas thermal oxidiser | Burns vent gas before release | 24.36 |
| Propylene bullets and acrylic acid tanks | Pressurised feed storage and tempered product storage | 20.88 |
| DCS instrumentation and safety interlocks | Controls feed ratios and trips the plant safely | 17.40 |
| Total plant and machinery | 348.05 | |
Costs are the sample report's estimates. A real plant is priced from the licensor's process package and vendor quotations.
Utilities and manpower for an acrylic acid unit
An acrylic acid plant runs round the clock, so utilities and shift staffing are sized for continuous operation rather than a day shift.
| Power and fuel | ₹81.48 lakh in Year 3 in our sample, about 4.8% of sales |
|---|---|
| Steam | Raised from reaction heat through the molten salt system and used in the extraction and distillation reboilers |
| Cooling and tempered water | For the quench section and condensers, and to keep product tanks warm enough that the acid does not freeze |
| Manpower | 33 people in our sample: 5 in management and administration, 12 skilled operators and 16 semi-skilled and unskilled workers, costing ₹71.34 lakh in Year 1 |
| Working days | 330 a year, leaving time for planned shutdowns and catalyst work |
Licences and approvals for an acrylic acid plant
Approvals take longer than for most chemical units, because the plant stores a liquefied flammable gas and handles a listed hazardous intermediate. Plan them into the project schedule from the start.
| Environmental clearance | Prior environmental clearance under the EIA Notification 2006; item 5(f), synthetic organic chemicals, covers basic organic chemicals and has standard terms of reference for the EIA study |
|---|---|
| Pollution board consent | Consent to establish and operate from the State Pollution Control Board; petrochemicals and organic chemicals manufacturing are red category under CPCB criteria |
| Propylene storage | PESO licence (Form LS-1A or LS-1B) to store compressed gas in pressure vessels under the SMPV (Unfired) Rules 2016 |
| Hazardous chemicals | Acrolein, the first-stage intermediate, is listed in Schedules 1 to 3 of the MSIHC Rules 1989, with threshold quantities of 20 and 200 tonnes; check which duties apply at your inventory |
| Factory and fire | Factory licence and fire NOC from the state factories department and fire service; requirements vary by state |
| Product specification | Sold to buyer specification; BPCL's published grade, for example, is 99.5% minimum purity, 0.1% maximum water and 180–220 ppm MEHQ |
Rules checked October 2026. Confirm current requirements with the state authorities before you apply.
Market for acrylic acid in India
Acrylic acid is an intermediate: almost all of it goes into other chemicals. The biggest uses are acrylate esters for paints and adhesives, superabsorbent polymers for diapers, and polyacrylates for water treatment and detergents.
India had no domestic production when IndianOil announced its unit in April 2018. BPCL's propylene derivatives complex at Kochi now makes acrylic acid alongside butyl acrylate and 2-ethylhexyl acrylate. Buyers also import, so a new plant competes with imported acid on delivered price.
- Acrylate ester and emulsion polymer producers
- Superabsorbent polymer makers for hygiene products
- Water treatment and scale inhibitor formulators
- Detergent, textile and paper chemical manufacturers
- Chemical traders and distributors
Where a new plant wins: acrylic acid has to be shipped inhibited and within a narrow temperature band. A domestic producer with assured supply and short delivery times can earn a place against imports.
Mistakes that weaken an acrylic acid project report
- No firm propylene source
Propylene is 84% of raw material cost in our sample. A report without a supply agreement or pipeline link to a refinery or cracker will not satisfy a lender.
- Pricing on one good month
The acrylic acid price and the propylene price move separately. Profit sits in the spread, so the report should test a narrower spread, not just a lower price.
- Treating catalyst as a one-time cost
Both reactor stages may need recharging within the loan period. The cost and the shutdown days belong in the projections.
- Underplanning product storage
Acrylic acid freezes at about 13 °C, and the MEHQ inhibitor needs dissolved oxygen to work. Tanks need tempered heating and must never be blanketed with pure nitrogen.
- Leaving out vent gas and effluent treatment
The thermal oxidiser and wastewater treatment are conditions of a red category consent, not optional extras. Both add to capital and running cost.
How NPCS helps you plan an acrylic acid plant
- Capacity and feedstock fitSize the plant to the propylene you can secure and the grade your buyers need.
- Technology and equipmentCompare licensed process routes and the main equipment packages, with budget costs.
- Bank-ready project reportProjections, DSCR, sensitivity to the propylene spread and working capital in your lender's format.
- Approvals roadmapEnvironmental clearance, pollution consent, PESO and hazardous chemical compliance in the right order.
NPCS's client list records 64 assignments in adhesives, resins and polymers, including one for acrylic acid from propylene. The NPCS project team, led by founder Ajay Kumar Gupta, has prepared project reports since 1994.
What's inside the acrylic acid from propylene sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
19 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS acrylic acid from propylene project reports
These are acrylic acid from propylene project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Acrylic Acid from Propylene | 16,000 MT/Annum | ₹116 crore | 43% | 35% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Acrylic Acid from Propylene project report: frequently asked questions
What is the acrylic acid from propylene manufacturing plant cost in India?
It depends almost entirely on scale and the licensed technology. Our illustrative sample models a compact 6.5 MT per day unit at ₹722.92 lakh, including ₹348.05 lakh of plant and machinery. Commercial propylene oxidation plants are far larger, so a real project needs costing from licensor data, equipment quotations and your propylene supply terms.
How is acrylic acid made from propylene?
Propylene is mixed with air and steam and oxidised in two reactor stages. A molybdenum-bismuth catalyst first turns it into acrolein, then a molybdenum-vanadium catalyst oxidises acrolein to acrylic acid. The acid is absorbed in water, separated with a solvent and purified by vacuum distillation, with an inhibitor added to stop polymerisation.
What raw materials are needed for acrylic acid production?
Propylene is the main input; in our sample it is 84% of raw material cost. The rest is oxidation catalysts, polymerisation inhibitors such as MEHQ and phenothiazine, extraction solvent make-up and process chemicals. Air supplies the oxygen, and steam dilutes the reactor feed, so utilities matter as much as purchased materials.
Is acrylic acid manufacturing profitable?
In our illustrative sample, the plant earns a 22% return on investment in Year 3 and breaks even at about 38% of capacity. It pays back in about 3.6 years, with an average DSCR of 1.80. Real margins depend on the gap between propylene cost and the acrylic acid price, catalyst life and plant uptime.
Which approvals does an acrylic acid plant need?
Expect prior environmental clearance under the EIA Notification 2006 and red category consent from the State Pollution Control Board. Propylene storage needs a PESO licence under the SMPV (Unfired) Rules 2016, and the MSIHC Rules 1989 apply because they list acrolein. Factory, fire and local approvals follow state rules.
Is the acrylic acid from propylene project report PDF free, and can I use it for a loan?
The sample PDF is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report. Its figures are representative and not taken from a real project, so it should not go to a bank. For a loan, NPCS prepares a report for your capacity, site and feedstock arrangement.
Sources and references
- Petrochemicals: propylene derivatives products and applicationsBharat Petroleum Corporation Limited, checked Oct 2026
- Acrylic acid product specificationBharat Petroleum Corporation Limited, checked Oct 2026
- IndianOil signs technology agreement for acrylic acid and butyl acrylateIndian Oil Corporation Limited, checked Oct 2026
- Standard terms of reference for EIA studies: synthetic organic chemicals industry, item 5(f)Ministry of Environment, Forest and Climate Change, checked Oct 2026
- Categorisation of industrial sectors under red category as per CPCB criteriaState Pollution Control Board, Odisha, checked Oct 2026
- Frequently asked questions on the SMPV (Unfired) Rules, 2016Petroleum and Explosives Safety Organisation, checked Oct 2026
- The Manufacture, Storage and Import of Hazardous Chemical Rules, 1989Punjab Pollution Control Board, checked Oct 2026
