What is a acetylene gas project report?
An acetylene gas project report is a detailed project report (DPR) for a plant that makes acetylene from calcium carbide and water and fills it into dissolved acetylene (DA) cylinders. It covers the process, cylinder fleet, machinery, PESO licences, project cost, means of finance, five-year projections, DSCR and break-even a lender needs.
Entrepreneurs and industrial gas dealers use it to size the plant and raise a term loan; banks use it to check whether cylinder refill income can repay the debt.
Also known as: dissolved acetylene, DA gas, ethyne, C2H2.
Acetylene gas manufacturing plant cost in India
Our sample report models a plant making 1,500 kg of acetylene a day, filled into DA cylinders, working 330 days a year. It starts at 60% of capacity and reaches 80% in Year 5, selling at ₹328 per kg before GST.
Two things set the cost of an acetylene plant apart from most chemical units. The cylinder fleet is bought up front and sits with customers, and the plant needs safety distances that push up land and building cost.
| Land and site development | 39.91 |
|---|---|
| Building and civil works | 197.86 |
| Plant and machinery | 387.88 |
| Other fixed assets | 62.60 |
| Contingencies | 29.29 |
| Preliminary and pre-operative | 17.94 |
| Working capital margin | 37.52 |
| Total | 773.00 |
| Promoter's contribution (25%) | 193.25 |
|---|---|
| Term loan from bank (75%) | 579.75 |
| Cash credit limit (separate) | 112.56 |
| Total project cost | 773.00 |
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.
Acetylene gas manufacturing process
Calcium carbide reacts with water to give acetylene and calcium hydroxide, which leaves the generator as lime sludge. In theory 2.46 kg of pure carbide gives 1 kg of acetylene; commercial carbide is less pure, so real use is higher.
Generators either drip water onto carbide or drop carbide into water. Small water-to-carbide units work at low pressure, up to about 0.17 kg/cm². Our sample plant uses the carbide-to-water type, where a large volume of water takes away the heat of reaction.
- Carbide feeding
Graded calcium carbide is fed in small lots from a hopper into the water in the generator.
- Gas generation
Carbide reacts with excess water to release acetylene, and the lime slurry is drained to settling pits.
- Cooling and purification
The gas is cooled, washed and passed through a chemical purifier that removes phosphine and hydrogen sulphide.
- Low pressure drying and compression
Moisture is removed and a flameproof compressor raises the gas to filling pressure in stages.
- High pressure drying
The compressed gas passes through a high pressure dryer before it reaches the filling ramp.
- Cylinder filling
Gas is filled slowly into cylinders whose porous mass holds acetone, so the acetylene dissolves instead of staying as free gas.
- Weighing, testing and dispatch
Filled cylinders are weighed against their tare, leak tested and sent to dealers and factories.
Calcium carbide and other inputs
Calcium carbide is the cost that decides profit. In our sample it costs ₹514.33 lakh in Year 3 against sales of ₹1,136.52 lakh, so a small change in carbide price moves the DSCR more than any other input.
Carbide gives off acetylene as soon as it meets moisture. It arrives in sealed drums and is kept in a dry, raised shed licensed for that purpose.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Calcium carbide | 88% | 514.33 |
| Acetone for cylinder replenishment | 7% | 40.91 |
| Purifying and drying chemicals | 5% | 29.22 |
| Total | 100% | 584.46 |
Raw materials are 51.4% of sales in the sample. Your report uses current carbide quotations and the grade you buy.
Machinery and cylinders for an acetylene plant
The cylinder fleet is the single largest item, at ₹147.40 lakh of the ₹387.88 lakh machinery cost in our sample. Each cylinder spends days at a customer's site, so the plant needs several cylinders for every one it fills in a day.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Carbide to water acetylene generator | Reacts carbide with water to make gas | 54.30 |
| Low pressure gas holder | Stores gas and evens out flow | 23.27 |
| Cooler, washer and chemical purifier | Removes heat, dust, phosphine and sulphur | 31.03 |
| Low and high pressure dryers | Take moisture out before and after compression | 23.27 |
| Flameproof acetylene compressor | Raises gas to filling pressure | 46.55 |
| Filling ramps with flashback arrestors | Fill several cylinders at once and stop flame travelling back | 27.15 |
| DA cylinders with porous mass | Hold the dissolved gas for sale and return | 147.40 |
| Lime sludge handling system | Drains and settles the slurry from the generator | 15.52 |
| Cylinder testing and QC equipment | Checks weight, leaks and gas purity | 19.39 |
| Total plant and machinery | 387.88 | |
Costs are the sample report's estimates. DA cylinders must carry BIS certification to IS 7312; get current quotations before you finalise.
Manpower and power for an acetylene plant
Our sample plant employs 31 people, with operators on the generator, compressor and filling ramps across shifts. Power and fuel cost ₹69.71 lakh in Year 3, or 6.1% of sales.
| Category | Number | Monthly wage (₹) | Annual cost (₹ lakh) |
|---|---|---|---|
| Management, supervision and administration | 5 | 32,500 | 19.50 |
| Skilled workers and operators | 11 | 20,500 | 27.06 |
| Semi-skilled and unskilled workers | 15 | 13,500 | 24.30 |
| Total | 31 | 70.86 |
Wages are assumed to rise 5% a year in the sample.
PESO licences and approvals for an acetylene gas plant
Acetylene is a PESO-controlled activity from carbide store to filled cylinder. Plan the site around these approvals before you buy land, as of October 2026.
| Generator approval | PESO approves the design and installation of the acetylene generating plant; a copy of this approval is needed for the storage licence |
|---|---|
| Filling licence | Form E under the Gas Cylinders Rules 2016, with dissolved acetylene as a separate category, granted by the Chief Controller or Controller of Explosives |
| Cylinder storage | Form F under the same rules for the shed that holds filled DA cylinders |
| Carbide storage | Form IV under the Calcium Carbide Rules 1987 for a carbide shed that is part of an acetylene plant, granted by the Chief Controller |
| Safety distances | About 15 m from the boundary wall and other buildings, 30 m from an oxygen plant and 9 m between lime sludge pits and the boundary or generator, as listed by PESO |
| Pollution consent | Consent to establish and operate from the State Pollution Control Board; Odisha, for example, lists acetylene among Red category industrial gases |
| Standards | IS 308:2024 for dissolved acetylene gas, and IS 7312:2018 for DA cylinders, which is under BIS mandatory certification |
Rules and categories differ by state and change over time. Confirm with the PESO circle office and your State Pollution Control Board.
Who buys acetylene gas
Oxy-acetylene gives the hottest fuel gas flame in common use, so it stays the gas of choice for cutting thick steel, brazing and flame hardening. Demand follows fabrication, scrap and repair work more than any one industry.
Most plants sell within a few hundred kilometres. DA cylinders are heavy, returnable and cannot travel in closed vehicles, which keeps freight cost high and favours a plant close to its buyers.
- Industrial gas dealers and distributors
- Steel fabrication and engineering workshops
- Shipbreaking and scrap cutting yards
- Railway, defence and public sector workshops
- Laboratories using atomic absorption spectroscopy
Where a new plant wins: reliable refills. Buyers stay with a supplier who turns cylinders around quickly, so fleet size and delivery matter as much as price.
Mistakes that weaken an acetylene gas project report
- Too few cylinders for the output
Sales assume full cylinders are always ready, but most of the fleet is at customer sites. Without enough cylinders the plant cannot sell what it makes.
- Leaving out acetone top-up
Cylinders lose some acetone in use, more when gas is drawn too fast. A report that ignores acetone cost understates running cost and the risk of unsafe fills.
- No plan for lime sludge
Each kg of acetylene leaves wet calcium hydroxide. Pits, drying space and disposal or sale need land and a line in the budget.
- Site chosen before checking PESO distances
The 15 m and 30 m distances can make a small plot unusable. Check the layout against PESO norms before you pay for land.
- Retail cylinder rates used for sales
Dealers buy well below the price a workshop pays. Using retail rates inflates revenue and the DSCR a bank will test.
How NPCS helps you set up an acetylene gas plant
- Capacity and cylinder fleetSize daily output and the number of DA cylinders to match your market and turnaround.
- Machinery and suppliersCompare generator, purifier, compressor and filling ramp options and get quotations.
- Bank-ready project reportProjections, DSCR, carbide price sensitivity and working capital in your lender's format.
- Layout and PESO approvalsA plant layout that respects PESO distances and the list of licences for your state.
NPCS has prepared project reports since 1994. Its published client list shows 269 assignments in organic and specialty chemicals, for entrepreneurs, banks and companies in India and abroad.
What's inside the acetylene gas sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
19 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS acetylene gas project reports
These are acetylene gas project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Acetylene GAS | 240 Cubic Meter/day | ₹1.63 crore | 40% | 44% | Get this report |
| High Pure Dissolved Acetylene Gas | Acetylene Gas : 360 M3/ Day | ₹2.6 crore | 25% | 52% | Get this report |
| Acetylene GAS | 400 Cubic Metre/Day | ₹3.44 crore | 46% | 40% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Acetylene Gas project report: frequently asked questions
What does an acetylene gas manufacturing plant cost in India?
It depends mostly on daily output and the size of the cylinder fleet. Our sample report models a 1,500 kg per day plant at a total project cost of ₹773 lakh, of which plant and machinery is ₹388 lakh. Cylinders are the largest machinery item at ₹147.40 lakh. Land, building and state approvals change the total for a real project.
Which raw material is used to make acetylene gas?
Calcium carbide and water. Carbide reacts with water to release acetylene and leave lime slurry. In our sample report carbide is 88% of raw material cost, acetone used to top up cylinders is 7%, and purifying and drying chemicals make up the remaining 5%. Carbide must be kept dry, because moisture starts the reaction in storage.
Which licences are needed to start an acetylene gas plant?
PESO first approves the design and installation of the acetylene generating plant. It then licenses filling of dissolved acetylene in Form E and storage of filled cylinders in Form F, under the Gas Cylinders Rules 2016. Storing calcium carbide at the plant needs a Form IV licence under the Calcium Carbide Rules 1987. You also need State Pollution Control Board consent, factory and fire approvals.
Is an acetylene gas plant profitable?
In our illustrative sample, a 1,500 kg per day plant earns a 13% return on investment in Year 3 and breaks even at 45% of capacity. It pays back in about 4.5 years, with an average DSCR of 1.41. Real profit depends on the calcium carbide price, how fast cylinders come back from customers and the share of sales made directly to factories.
Why is acetylene filled in cylinders with acetone?
Acetylene is unstable and cannot be compressed on its own to the pressures used for other gases. A DA cylinder is packed with a porous mass that holds acetone, and the acetylene dissolves in the acetone. Drawing gas too fast or using a cylinder on its side carries acetone out, so plants top up solvent before refilling.
Is the acetylene gas project report PDF free, and can I use it for a loan?
The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report. Its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and licences.
Sources and references
- Standard operating procedure: Gas Cylinders Rules, 2016Petroleum and Explosives Safety Organisation (PESO), checked Oct 2026
- Standard operating procedure: Calcium Carbide Rules, 1987Petroleum and Explosives Safety Organisation (PESO), checked Oct 2026
- Citizen charter: functions and approvalsPetroleum and Explosives Safety Organisation (PESO), checked Oct 2026
- IS 308:2024 Dissolved acetylene (gas): specificationBureau of Indian Standards, checked Oct 2026
- IS 7312:2018 Steel dissolved acetylene gas cylinders: specificationBureau of Indian Standards, checked Oct 2026
- Categorization of industrial sectors under Red categoryState Pollution Control Board, Odisha, checked Oct 2026
- Safety training leaflet: acetylene cylinders (AIGA 009/26)Asia Industrial Gases Association, checked Oct 2026
- Welder trade theory: acetylene generatorsNational Instructional Media Institute, Government of India, checked Oct 2026
