WhatsApp us
Request a Quote

Project reports in Specialty Chemicals

Acetic Anhydride Plant Project Report

Plant cost, ketene process, machinery, NDPS licensing and five-year financials for an acetic anhydride plant, with a free sample project report PDF you can open now.

Also known as: ethanoic anhydride, acetyl oxide

Plant capacity
11 MT per day
Total project cost
₹1,129 lakh
Plant and machinery
₹533 lakh
Return on investment
14% (Year 3)
Break-even
46% of capacity
Payback period
About 4.6 years

Figures from our illustrative sample report for a typical unit. They show the format of an NPCS report and are not quotes for your project.

What is a acetic anhydride project report?

An acetic anhydride project report is a detailed project report (DPR) for a plant that cracks glacial acetic acid into ketene and absorbs it in more acid. It sets out the process, machinery, raw materials, NDPS licensing, project cost, means of finance, five-year projections, DSCR and break-even that lenders review.

Chemical entrepreneurs and bulk drug makers planning backward integration use it to size the plant and raise a term loan; banks use it to test whether the plant can repay.

Also known as: ethanoic anhydride, acetyl oxide.

Acetic anhydride manufacturing plant cost in India

Our sample report models an 11 MT per day plant that buys glacial acetic acid and runs the ketene route. It works 330 days a year, or 3,630 MT per year at full capacity. Utilisation starts at 60% and reaches 80% in Year 5, with the selling price held at ₹77,700 per MT.

₹1,129 lakhTotal project cost
₹1,974 lakhSales in Year 3
₹157 lakhNet profit in Year 3
1.41Average DSCR
Cost of project (₹ lakh)
Land and site development99.46
Building and civil works301.10
Plant and machinery532.72
Other fixed assets62.01
Contingencies41.69
Preliminary and pre-operative25.92
Working capital margin66.18
Total1,129.08
Means of finance (₹ lakh)
Promoter's contribution (25%)282.27
Term loan from bank (75%)846.81
Cash credit limit (separate)198.54
Total project cost1,129.08

Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. DSCR (cash earned for each rupee of loan instalment) is lowest at 1.23 in Year 2, the first full year of repayment. All figures are illustrative.

Acetic anhydride manufacturing process by the ketene route

The ketene route joins two reactions. Acetic acid is cracked to ketene and water, and the ketene is then absorbed in fresh acetic acid. Half the acid you buy is cracked and half absorbs the ketene, so stoichiometry alone needs about 1.18 tonnes of acid per tonne of anhydride.

  1. Vaporising

    Glacial acetic acid, together with acid recycled from distillation, is vaporised and preheated, and a small dose of triethyl phosphate is added as the cracking catalyst.

  2. Cracking

    The vapour passes through alloy coils in a fired furnace at about 700–750 °C under vacuum, where part of the acid splits into ketene and water.

  3. Quenching

    Ammonia neutralises the catalyst and the gas is chilled at once, so water and unreacted acid condense out before ketene can react back with the water.

  4. Absorption

    Ketene gas meets glacial acetic acid in packed columns under vacuum at about 45–55 °C and reacts to form crude anhydride.

  5. Distillation

    Columns with reboilers separate pure acetic anhydride from acetic acid, which goes back to the vaporiser, and from a small heavy residue.

  6. Storage and dispatch

    The product is held in stainless steel tanks under dry nitrogen, because moisture turns it back into acetic acid, and leaves in sealed drums or tankers with a consignment note.

Which route suits an acetic anhydride plant in India?

Three routes are in commercial use. The right one depends less on chemistry than on what feedstock you can secure at a steady price.

Ketene route, bought acetic acidThe usual choice for a new stand-alone plant. Capital goes into the cracking furnace, absorption and distillation, and the margin depends on the spread between acid and anhydride prices.
Ketene route, alcohol basedEthanol (ENA) is oxidised to acetaldehyde and then to acetic acid on site, which feeds the ketene section. It suits groups with an assured alcohol supply, at the cost of two more process stages and more capital.
Methyl acetate carbonylationCarbon monoxide reacts with methyl acetate over a rhodium and iodide catalyst under dry conditions. It is used in large plants tied to methanol and acetic acid complexes, not in a single mid-size unit.
Basis of our sample reportKetene route with purchased glacial acetic acid, 11 MT per day, acid recycled from distillation.

Raw materials for acetic anhydride

Glacial acetic acid is 94% of raw material cost in the sample, so the plant's margin is really the spread between acid and anhydride prices. Indian buyers mix domestic acid and imports, and the price can move sharply within weeks, so plants hold about a month of stock.

Raw materialShare of costYear 3 (₹ lakh)
Glacial acetic acid94%1,049.30
Triethyl phosphate catalyst3%33.49
Ammonia for catalyst neutralisation1%11.16
Nitrogen and process chemicals2%22.33
Total100%1,116.28

Year 3 of the sample, at 70% utilisation. Raw materials are 56.5% of sales.

Machinery for an acetic anhydride plant

The ketene cracking furnace is the largest single item, followed by the distillation columns. Most wetted parts are in stainless steel or special alloys, because hot acetic acid and anhydride attack ordinary steel.

EquipmentWhat it doesSample cost (₹ lakh)
Acetic acid vaporiser and preheaterTurns fresh and recycled acid into hot vapour42.62
Ketene cracking furnaceCracks acid vapour to ketene at about 700–750 °C117.20
Quench coolers and condensersChill the gas and drop out water and unreacted acid63.93
Ketene absorption columnsAbsorb ketene in acetic acid to form crude anhydride74.58
Vacuum system with liquid ring pumpsKeep cracking and absorption under vacuum42.62
Distillation columns with reboilersSeparate pure anhydride and return acid for recycle95.89
Stainless steel storage tanksHold acid feed and product under dry nitrogen42.62
Vent scrubber and effluent treatmentScrub vent gases and treat acidic effluent26.63
DCS instrumentation and control panelControls furnace temperature, vacuum and column profiles26.63
Total plant and machinery532.72

Costs are the sample report's estimates for an 11 MT per day plant. Get current quotations before you finalise.

Site, utilities and manpower

An acetic anhydride plant runs round the clock, so utilities and shift staffing matter as much as the main equipment.

Land and site development₹99.46 lakh in the sample. A plot in a notified chemical or industrial estate usually makes pollution consent and environmental clearance simpler.
Building and civil works₹301.10 lakh in the sample, covering the process area, raw material and finished goods stores, and an office.
Power and fuel₹113.88 lakh in Year 3, 5.8% of sales. The cracking furnace burns fuel, while vacuum pumps, chillers and column reboilers draw most of the power and steam.
Cooling and nitrogenChilled water or brine for the quench and condensers, and a dry nitrogen supply to blanket tanks and drums against moisture.
Manpower57 people in the sample at a Year 1 cost of ₹129.66 lakh: 9 in management and supervision, 20 skilled operators and 28 semi-skilled and unskilled workers.
Operating days330 days a year, leaving time for planned shutdowns to clean the furnace coils and service the columns.

NDPS registration and other approvals for an acetic anhydride plant

Acetic anhydride is item 1 of Schedule A of the NDPS (Regulation of Controlled Substances) Order, 2013. The plant therefore needs narcotics control registration on top of the usual chemical plant approvals.

NDPS registrationA registration number in Form A from the Zonal Director, Narcotics Control Bureau, before you make, store or sell the product. Apply in Form B; the decision is due within 30 working days.
Records and returnsDaily accounts in Form C or D, kept for five years, and quarterly returns in Form E or F by the end of the month after each quarter.
DispatchEvery consignment moves with a Form G consignment note, and you may sell only to buyers with a valid registration number.
Export and importControlled under Schedules B and C. Each consignment needs a no objection certificate from the Narcotics Commissioner (Form J for export, Form K for import).
Pollution board consentOrganic chemicals manufacturing is in the Red category; consent to establish and to operate come from the State Pollution Control Board.
Environmental clearanceSynthetic organic chemicals fall under item 5(f) of the EIA Notification, 2006. Units in industrial estates are usually appraised by the state SEIAA, unless the site is near a protected or eco-sensitive area.
Product standardIS 1235:2023, the BIS specification for acetic anhydride (second revision).
Safety codeIS 5302:2026, the BIS code of safety for acetic anhydride (first revision), for storage, handling and emergency response.

Checked against official sources in October 2026. Rules change; confirm current requirements with the NCB zonal office and your state board.

Who buys acetic anhydride in India?

Bulk drug makers are the core market. They acetylate para aminophenol to make paracetamol and salicylic acid to make aspirin, and often buy in tanker loads on contract. Cellulose acetate for filter tow and films, dye and agrochemical intermediates, and acetylated food starches take the rest.

  • Paracetamol and aspirin bulk drug makers
  • Pharmaceutical intermediate manufacturers
  • Cellulose acetate producers
  • Dye and agrochemical intermediate makers
  • Registered chemical distributors

A closed buyer list: because you can sell only to holders of an NDPS registration number, your sales plan is a list of named, registered companies. A plant close to a pharma cluster, with steady assay and on-time tankers, competes well against distant suppliers and imports.

Mistakes that weaken an acetic anhydride project report

  • Treating NDPS compliance as paperwork

    Registration must come before the first stock, and every dispatch needs a consignment note. Budget staff time for daily records and quarterly returns, and check that each buyer is registered.

  • Building profit on one week's prices

    In the sample, a 10% rise in acid cost with no change in selling price would take ₹104.93 lakh off Year 3 profit before tax of ₹209.14 lakh. A report should test this.

  • Forgetting the weak acid stream

    The quench condensate is dilute acetic acid. It has to be recovered or sold, and the report must show the cost of handling it.

  • Under-sizing chilling and vacuum

    If the quench is slow, ketene reacts back with water and yield falls. Chillers and vacuum pumps sized for nameplate output, not average output, protect the acid consumption figure.

  • Ignoring moisture in storage

    Anhydride picks up water and turns back into acetic acid, so assay drops below IS 1235 limits. Nitrogen blanketing and dry, sealed drums belong in the cost estimate.

How NPCS helps you plan an acetic anhydride plant

  • Route and capacityCompare the ketene route on bought acid with an integrated alcohol route, and size the plant for your buyers.
  • Equipment and suppliersFurnace, absorption and distillation scope, materials of construction and quotations.
  • Bank-ready project reportProjections, DSCR and acid price sensitivity in the format your lender wants.
  • Approvals planNDPS registration, pollution consent and environmental clearance steps for your state.

NPCS's published client list includes 269 assignments in organic and specialty chemicals, and the NPCS project team has prepared project reports for chemical plants since 1994.

What's inside the acetic anhydride sample report

  1. Introduction
  2. Uses and applications
  3. Market potential
  4. Manufacturing process
  5. Raw materials
  6. Plant and machinery
  7. Land, building and utilities
  8. Manpower
  9. Licences and approvals
  10. Project cost and means of finance
  11. Working capital
  12. Projected profitability
  13. Cash flow statement
  14. Projected balance sheet
  15. Depreciation
  16. Term loan repayment
  17. Debt service coverage
  18. Break-even analysis
  19. Financial ratios
  20. Key assumptions
  21. Conclusion
  22. Monthly loan repayment schedule

18 pages, five-year projections, illustrative figures.

Open sample report

Free sample or a report for your project?

What you getFree sampleNPCS report for your project
Capacity and locationTypical unitYour capacity, site and state
FiguresIllustrativeBuilt on current prices and quotations
Machinery suppliers and quotationsNoYes
Market survey for your regionNoYes
Bank or scheme format (PMEGP, term loan)NoYes
Use for a loan applicationNoYes

Find NPCS project reports in your budget

Find other projects that fit your budget Search NPCS project profiles by investment, return and break-even, the same search as our Startup Selector.

What clients say about NPCS

4.7

264 Google reviews, as of 20 Oct 2026

Clients most often mention

  • feasibility reports 18
  • project report 16
  • helpful for startups 15
  • detailed reports 8
Read all reviews on Google
  • Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.

    Piyush Singh, Google review, 2026

  • Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended

    Saroj Yadav, Google review, 2026 View on Google

  • In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.

    Shrishti Gautam, Google review, 2026

  • NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.

    Raj Yadav, Google review, 2026

Acetic Anhydride project report: frequently asked questions

What is the cost of an acetic anhydride manufacturing plant in India?

Our sample report puts an 11 MT per day ketene-route plant at ₹1,129.08 lakh. That includes ₹532.72 lakh of plant and machinery, ₹400.56 lakh of land, site and buildings, and ₹66.18 lakh of working capital margin. These are illustrative figures. Your own cost depends on capacity, the route, whether you buy or make acetic acid, and the industrial estate you choose.

Do I need a licence to manufacture acetic anhydride?

Yes. Acetic anhydride is a Schedule A controlled substance under the NDPS (Regulation of Controlled Substances) Order, 2013. You need a registration number from the Zonal Director of the Narcotics Control Bureau before you make, store or sell it. You must also keep daily records, file quarterly returns and send every consignment with a Form G consignment note.

Why is acetic anhydride a controlled substance in India?

It is a strong acetylating agent that can be diverted to illicit drug manufacture, so India controls it as a precursor chemical. The control does not stop legitimate trade. It means the plant, its buyers and its transporters all work through registrations, consignment notes and quarterly returns that the Narcotics Control Bureau can trace.

Which raw material is used to make acetic anhydride?

Glacial acetic acid. In the ketene route half the acid is cracked to ketene and half absorbs it, so stoichiometry alone needs about 1.18 tonnes of acid per tonne of anhydride. In our sample report acetic acid is 94% of raw material cost, with triethyl phosphate catalyst, ammonia and nitrogen making up the rest.

Is acetic anhydride manufacturing profitable?

In our illustrative sample, the plant earns ₹156.86 lakh net profit on ₹1,974.36 lakh of sales in Year 3. Break-even is at 46% of capacity and the average DSCR is 1.41. Profit rests on the spread between acetic acid and anhydride prices, so a real report must test how a rise in acid cost affects repayment.

Is the sample report free and can I use it for a loan?

The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report. Its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, route, location and lender.

Sources and references

  1. Controlled substances in India under the NDPS (Regulation of Controlled Substances) Order, 2013Central Bureau of Narcotics, Government of India, checked Oct 2026
  2. NDPS (Regulation of Controlled Substances) Order, 2013 (G.S.R. 191(E), 26 March 2013)Ministry of Finance notification, hosted by Meghalaya Police, checked Oct 2026
  3. IS 1235:2023 Acetic anhydride, specification (second revision)Bureau of Indian Standards, checked Oct 2026
  4. IS 5302:2026 Acetic anhydride, code of safety (first revision)Bureau of Indian Standards, checked Oct 2026
  5. Categorisation of industrial sectors under Red category as per CPCB criteriaState Pollution Control Board, Odisha, checked Oct 2026
  6. Office memorandum on appraisal of item 5(f) synthetic organic chemicals projects, 4 February 2019Ministry of Environment, Forest and Climate Change, checked Oct 2026
Ajay Kumar Gupta, founder of NPCS

Who prepares NPCS reports

The NPCS project team, led by Ajay Kumar Gupta

This page and its sample report are prepared and reviewed by the NPCS project team, which has written techno-economic feasibility studies and detailed project reports since 1994.

Ajay Kumar Gupta founded Niir Project Consultancy Services (NPCS) and leads the organisation. With 40 years of experience in MSME project consulting, he has built the team that has delivered more than 28,000 project reports for clients worldwide, helping entrepreneurs plan and finance profitable manufacturing businesses.

Ajay Kumar Gupta on LinkedIn

Published
Last updated
Next review
Oct 2027
Reviewed by
NPCS project team

This page is reviewed every 12 months, or sooner when scheme limits, GST rates, BIS rules or pollution categories change. The sample report is illustrative: its figures are generated from industry-typical ratios for a unit of this size, checked so every statement balances, and are not taken from any client project.

Planning a different specialty chemicals project?

These are a few of the projects we advise on. NPCS's published client list records 269 specialty chemicals assignments, so tell us what you are planning.

Tell us your project

Recent specialty chemicals assignments

  • Iiconnic Apparels
    Comprehensive Project Report on SilicaPaurri Garhwal, 2026
  • Parul Industries
    Project Feasibility Report on Nicotine for industrial applicationsValsad, 2026
  • Rich Phytocare Private Limited
    Industrial Project Report on Potassium SchoeniteBodinayakanur, 2026
  • Lakshya Powertech Ltd
    Techno-Economic Project Study on Acoustic PanelsMumbai, 2026
  • Luxury Line Interiors & Furniture
    Project Feasibility Report on Precipitated Silica & Activated Carbon for Industrial ApplicHyderabad, 2026
  • Indian Potash Limited
    Techno-Economic Feasibility Report on Citric AcidCoimbatore, 2026
  • Cecilia Still
    Detailed Project Report on Tall Oil RosinsEurope, 2026
  • Taraka Pamidi
    Technical and Financial Feasibility Report on Silica-, 2025

Get a acetic anhydride project report for your plant

Tell us your planned capacity, location and loan scheme. Our team will confirm the scope and price of a report built on current machinery quotations and raw material prices for your region.

Reports are prepared in the format banks and PMEGP offices ask for, with five-year projections, DSCR and break-even.

Request a Acetic Anhydride Project Report

Share your plan and our team will call you back within 24 hours.

Start with the sample, then plan your own unit

Open the free acetic anhydride sample report to see the format, then talk to NPCS about a report for your capacity and location.

Sample PDF WhatsApp
Acetic Anhydride sample project report (illustrative) Download New tab

Illustrative sample. Figures are representative and not from a real project.

Call Us WhatsApp