Google Search

Search

Already a Member ?

Best Business Opportunities in Mizoram- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mizoram is a state of India. It is located in the northeastern part of the country and is bounded by Myanmar (Burma) to the east and south and Bangladesh to the west and by the states of Tripura to the northwest, Assam to the north, and Manipur to the northeast. The capital is Aizawl, in the north-central part of the state. Agriculture is the dominant economic activity of Mizoram, engaging more than two-thirds of the workforce. Two types of agriculture are practiced: terrace cultivation, in which crops are planted on relatively permanent, graduated terraces on the sides of hills and mountains to conserve water and reduce soil loss; and shifting agriculture, in which tracts called jhum are cleared by burning, cultivated for a limited period of time. Mizoram has a population of 1,091,014 with 552,339 males and 538,675 females. This reflects a 22.8% growth since 2001 census; still, Mizoram is second least populated state of India. The sex ratio of the state is 976 females per thousand males, higher than the national ratio 940. The density of population is 52 persons per square kilometer. Mizoram gross state domestic product (GSDP) in 2011-2012 was about 6991 crore (US$1.1 billion). The state's gross state domestic product (GSDP) growth rate was nearly 10% annually over 2001-2013 period. With international borders with Bangladesh and Myanmar, it is an important port state for Southeast Asian imports to India, as well as exports from India.

TOURISM

Mizoram, the Land of the Highlanders, is sandwiched between Myanmar, Bangladesh and the states of Tripura, Assam and Manipur. The rivers, peaks, plains and the lakes are the treasures of Mizoram. It is full of high ranges running from north to south covered by greenery throughout the year. The Mizoram State Government begins to recognize tourism as an important sector of the economy which needs to be developed for greater income generation. More emphasis on sustainable eco-tourism, adventure tourism, village tourism and rural tourism would bring in high - value tourism. With the increase of tourist the need for budget hotels has been acutely felt.

Tourism has emerged as an important economic activity and one of the fastest growing industries in the world. Globally, Tourism is the fastest growing industry and in terms of value, it comes third only after petroleum and Transport Industry.

As such, Tourism Department in Mizoram is also one of the fastest growing Departments in Mizoram. The Department has achieved these objectives by constructing Tourist Lodge, Tourist Resort and other Tourist amenities in difference places of Mizoram through liberal financing of Ministry of Tourism, Government of India.


INDUSTRIAL POLICY

The Industrial Policy of Mizoram State was first notified on 15.3.1989 to give direction to the strategy for Industrial development of the State. It laid stress on reducing shifting cultivation by encouraging a shift from primary to secondary sectors while protecting the Socio-Cultural and ethnic identity of the indigenous enterprise of Mizoram.

In view of the National Industrial Policy which laid special emphasis for the development of Industries in the North Eastern Region, the Govt. of Mizoram had notified new Industrial Policy 2000 for accelerated Industrial and Economic development of the State. The Government had adopted the approach for identification of thrust areas and promoting them with fiscal and other incentives packages. Broad policy of Foreign Direct Investment (FDI) and Investment from outside the State has been adopted on Joint venture (JV) mode to safeguard the interest of the tribal population of Mizoram. Various administrative support system and market support system are also announced. The Govt. of Mizoram is mandated in giving sustainable employment and introducing better utilization of land by introducing New Land Use Programme (NLUP).

OBJECTIVES

•        To create infrastructure facilities, provide incentives and marketing as well as technical support to industries.

•        To provide skill development and training for educated youth to develop entrepreneurial skills and make them self-employed.

•        To create employment opportunities particularly to the vulnerable section of the society and people in rural area, ensuring inclusive development.

•        To reduce sectoral and regional imbalance in the industrial development in the State by promoting Industries under all sectors.

•        To create proper linkage of processing Industries with the farm produce of agriculture, horticulture, forest and livestock’s.

•        To attract investment in the state.

IDENTIFICATION OF THRUST AREAS

Thrust will be given for those industries based on value addition of locally available resources. Special incentives will be formulated for speedy development of industrial units engaged in any of the following thrust sector Enterprises.

•        Forest-based Industries

The vast bamboo and other forest resources of Mizoram will be optimally harvested for setting up of Industry for manufacturing of various high value bamboo and other forest based products.

•        Food Processing Industries

Primary production of various food items, whether agricultural based, horticultural or livestock based will be linked with processing Industries.

•        Handloom Industries

Handloom sector will continue to receive serious attention of the Govt. Utmost importance will be given for improving quality product by introducing improved design, packaging, branding.

•        Handicraft Industries

The traditional skill of Mizo people will be upgraded and diversified for market competitiveness of handicraft products.

•        Plantain fibre and hill brooms

The Govt. will encourage value addition of hill-brooms. The flow of raw and unprocessed broom outside the state will be discouraged by giving attention towards value addition to help local industry.

•        Textile related industries

Bulk production of readymade garments will be encouraged as this sector is having good potential for market outside the state and export.

•        Animal Feed and poultry feed Industries

The Government is giving thrust towards having sufficient meat and meat products for which farming has been encouraged.

INCENTIVES

The incentives offered under the Rules for the grant of incentives/subsidies under the Industrial Policy of Mizoram State are-

•        Subsidies on the cost of Project Report 

•        Land subsidy

•        Factory rent subsidy

•        Manpower development subsidy

•        Interest subsidy

•        Power subsidy

•        Subsidy on Power Line 

•        Subsidy on Power Generating set

•        State Transport subsidy on Plant and Machinery 

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 85 of 249 | Total 2486 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 85 248 249   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Gypsum Plaster Board

Gypsum Plaster Boards are constructional sheets composed of consigned Gypsum with about 15% fibre. Its outstanding contributes are fire resistance, dimensional stability, easy workability and low cost fibres are added to provide crack resistance and for fire resistance water repellent chemicals may be added to the board core. Gypsum plaster boards are selected for use according to their type, size, thickeners and edge profit. The Boards may be used for example to provided dry lining finishes to masonry walls, to ceilings etc. The Indian market for Gypsum Plaster Board is expected to reach about 333.64 million m2 by 2021 from 221.75 million m2 in 2016, The Gypsum plasterboard global market size is estimated to grow from USD 18.07 Billion in 2016 to USD 23.85 Billion by 2021, at a CAGR of 5.7% between 2016 and 2021.Entrepreneurs who invest in this project will be successful. Few Indian major players are as under • B P B India Gypsym Ltd. • F C I Aravali Gypsum & Minerals India Ltd. • I D L Buildware Ltd. • I D L Salzbau (India) Ltd. • Jath Wind Energy Pvt. Ltd. • MytrahVayu (Manjira) Pvt. Ltd.
Plant capacity: Gypsum Plaster Board: 13333 Sq.mt./DayPlant & machinery: Rs. 476 lakhs
Working capital: -T.C.I: Cost of Project: Rs 3394 lakhs
Return: 34.00%Break even: 33.00%
Add to Inquiry Add to Inquiry Basket

Nuts & Bolts (Hot Dip Galvanized)

Nuts and Bolts are available in various sizes and shapes. The kind of the classification of bolts and nuts may broadly be those made by the cold and hot process plant.Nuts and Bolts are used by the existing industries, repair workshops etc.Hot Dip Galvanizing is a process in which an adherent, protective coating of zinc and zinc compounds is developed on the surfaces of iron and steel products by immersing them in a bath of molten zinc. Hot Dip Galvanized Fasteners is extensively used to join heavy-duty components together. India is expected to increase from 88.4 million tonnes (MT) in 2017 to 128.6 MT by 2021. The analysts forecast global industrial fasteners market to grow at a CAGR of 4.05% during the period 2016-2020. Worldwide demand for industrial fasteners is forecast to amount to US$93.8 billion. The revenue in North America will register US$20.05 billion, US$18.85 billion in Europe, US$40.75 billion in Asia Pacific and US$14.15 billion in other regions, respectively. Which facilitates the development of new technologies and ensure a high quality product. Few Indian major players are as under • A V R Fasteners Pvt. Ltd. • Adinath Forging Pvt. Ltd. • Agarwal Bolts Ltd. • Agarwal Fastners Pvt. Ltd. • Deepak Fasteners Ltd. • Dev Fasteners Ltd.
Plant capacity: Mild Steel Zinc Coated Bolts (DR M8-M18): 2310 MT/Annum Mild Steel Zinc Coated Nuts (DR M8-M30): 690 MT/AnnumPlant & machinery: Rs. 404 lakhs
Working capital: -T.C.I: Cost of Project: Rs. 897lakhs
Return: 28.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Exercise Note Book

Exercise books are widely known & vastly used as day-to-day products. Notebooks are available in the market in various sizes, shapes & pages and having various types of covers paper bound, board and Rexene bound etc. Writing pads, exercise notebooks and ring books are made from paper sheet layers which are commonly ruled, stitched or glued and used for writing. They are composed of pages, often ruled, made out of paper, used for purposes including recording notes or writing, drawing and similar activities. The demand for notebooks is projected to reach 2,250 tons and 3,155 tons by the year 2017 and 2022. India exercise notebook market is expected to reach Rs. 334.6 billion by FY’2020. India exercise notebook market, segmentation on the basis of Use, Number of Pages, GSM, Recycled/Non-Recycled Papers, Retail/Institutional Sales, Size, Bindings, Cover Types, City Tiers, Rural/Urban Demand and Paper Types. India stationery market revenues are projected to grow at a CAGR of 10.5% during 2018-24. Thus, due to demand it is best to invest in this project. Few Indian major players are as under • Apeejay Oxford Bookstores Pvt. Ltd. • Apollo Publishers Ltd. • Aptonline Ltd. • Archies Ltd. • C B S Publishers & Distributors Pvt. Ltd. • Crossword Bookstores Ltd.
Plant capacity: Exercise Note Books (17x27 cm.): 10000 Pcs./DayPlant & machinery: Rs. 48 lakhs
Working capital: -T.C.I: Cost of Project: Rs86 lakhs
Return: 27.00%Break even: 67.00%
Add to Inquiry Add to Inquiry Basket

Ready Mix Concrete

Ready mix concrete is a modern trend of introduction in the Asian Countries. It is already introduced long before in the European Countries. It is new concept of use concrete in the construction area. Ready mix concrete has advantages in the area where immediate requirement of concrete mixture like in the preparation of bridge overhead roads on or the road construction. The good quality concrete is a homogeneous mixture of water, cement, aggregates and other admixtures. India is the second largest producer of cement in the world after China. It is followed by Japan and the USA. Cement consumption is very closely linked to the performance of the construction industry; the growth of RMC in India has in the past been predominantly driven by demand from the metro cities. According to an ICRA analysis, in cities like Mumbai it is mandatory to use RMC in construction of flyovers. The world market for Ready-Mix Concrete is projected to reach $105.2 billion. The RMC market in India is estimated to be worth USD 78.7 billion by 2024.As a whole any entrepreneur can venture in this project without risk and earn profit. Few Indian major players are as under • A C C Ltd. • Ahlcon Ready Mix Concrete Pvt. Ltd. • Ambit Concrete Pvt. Ltd. • Dirk Pozzocrete (M P) Pvt. Ltd. • Nutech Engineering Technologies Ltd. • Particle Dynamics Pvt. Ltd.
Plant capacity: Ready Mix Concrete (M20): 240 Cu.Mt./DayPlant & machinery: Rs 48 lakhs
Working capital: -T.C.I: Cost of Project: Rs. 229lakhs
Return: 27.00%Break even: 73.00%
Add to Inquiry Add to Inquiry Basket

Red Oxide Primer From Mill Scale

Red oxide primer is a specially formulated coating used as a base coat for ferrous metals. Red-oxide primer serves a similar purpose to interior wall primers in that it prepares metal for a topcoat, but it also gives iron and steel surfaces a layer of protection. A primer is composed of Red Oxide, solvents, resins, and various additives. The pigments give the primer color; solvents make it easier to apply; resins help it dry; and additives serve as everything from fillers to anti fungicidal agents. Indian paint market will grow with a CAGR of around 14% during 2015-16 to 2019-20. The Indian paint industry has been growing at an average 15% per annum over the last decade. Growth has been consistent with the Indian GDP growth rate and in some years the industry has grown at a rate of 1.5 to 2 times higher than that of GDP growth. This facilitates the development of new technologies and ensures a high quality product. Few Indian major players are as under • Ashok Neel Mfrs. Pvt. Ltd. • Bajaj Superpack India Ltd. • Eskay Dye-Stuffs & Organic Chemicals Pvt. Ltd. • Futura Polyesters Ltd. • NirupSynchrome Ltd. • Omkar Industries Ltd.
Plant capacity: Red Oxide Primer (Each Packed in 20 Ltrs Container): 1000 Packs/Day Red Oxide Primer (Each Packed in 5 Ltrs Container): 4000 Packs/DayPlant & machinery: Rs. 412 lakhs
Working capital: -T.C.I: Cost of Project : Rs1247 lakhs
Return: 27.00%Break even: 59.00%
Add to Inquiry Add to Inquiry Basket

IV Fluids (BFS Technology)

Intravenous fluids are fluids which are intended to be administered to a patient intravenously, directly through the circulatory system. These fluids must be sterile to protect patients from injury, and there are a number of different types available for use. Intravenous fluids can also be used as a route of medication administration. If a doctor wants to deliver a small amount of medication over an extended period of time, it can be dissolved in a bag of intravenous fluids and set on an infusion pump which delivers the medicated fluid directly into the blood. The Indian pharmaceutical industry is the fourth largest in the world in terms of volume of output and thirteenth in domestic demand. However, the Indian industry, valued at USD 17 bn in represented just over 1% of the global pharmaceutical industry (USD 1700 bn) in value terms. The domestic market is estimated at Rs 680 bn. Intravenous (IV) fluids market in India is around Rs. 3,000 crore growing at healthy rate of around 15-20 per cent a year due to its essential requirement in nature. Entrepreneurs who invest in this project will be successful. Few Indian major players are as under • Abaris Healthcare Pvt. Ltd. • AhlconParenterals (India) Ltd. • AxaParenterals Ltd. • Infutec Healthcare Ltd. • Kokad Pharmaceutical Laboratories Ltd. • Parenteral Surgicals Ltd.
Plant capacity: IV Fluids (500 ml Bottle): 49600 Pcs./DayPlant & machinery: Rs. 1954 lakhs
Working capital: -T.C.I: Cost of Project: Rs. 2756 lakhs
Return: 25.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

LPG Bottling Plant

LPG cylinder filling plants vary considerably in size, complexity and layout. The type and size depends on such factors as maximum potential throughput requirements, size and type of cylinder filled and the number/grades of products handled. Liquified Petroleum Gas (LPG), popularly known as cooking gas, is a mixture of hydrocarbons which are gaseous at normal temperature, but can be liquified at moderate pressure, and can be stored in cylinders as a liquid under pressure, and is drawn out and used as gas. The average growth rate in demand has settled down to around 10% from a high of 18% during early 1990s. Apart from commercial and industrial establishments, 94 mn households use LPG. Projections from all three scenarios reveal that demand for LPG will reach a minimum of 5.9 million metric tons by the year 2022.Thus, due to demand it is best to invest in this project. Few Indian major players are as under • AdaniDhamra L P G Terminal Pvt. Ltd. • Aegis Gas (Lpg) Pvt. Ltd. • Aegis Logistics Ltd. • Alert Petrogas Ltd. • Asia Lpg Pvt. Ltd. • Balaji Pressure Vessels Pvt. Ltd.
Plant capacity: LPG Cylinders (5 Kgs Size): 1360 Cylinders/Day LPG Cylinders (14.2 Kgs Size): 1000Cylinders/Day LPG Cylinders (19 Kgs Size): 1000 Cylinders/DayPlant & machinery: Rs. 113 lakhs
Working capital: -T.C.I: Cost of Project Rs. 984lakhs
Return: 27.00%Break even: 35.00%
Add to Inquiry Add to Inquiry Basket

Cashew Nut Processing Unit

The cashew nut is a popular dessert nut, eaten out of hand, with other mixed nuts and used in baking and confections. Sixty percent of cashews are consumed as salted nuts. The cashew apple is generally processed and consumed locally. The raw cashew nut is the main commercial product of the cashew tree, though yields of the cashew apple are eight to ten times the weight of the raw nuts. ? India is the third largest consumer of cashew nuts in the world & India stands first in Cashew Nut Processing. India processes around 1.59 million tons of cashew nuts every year though it produces only around half of the quantity that it processes. India’s cashew industry might have to increase domestic production to over 2 million tonnes by the year 2025, it is expected to achieve a target of 2.14 MT of raw cashew nut production in India, against the estimated demand of 2.19 MT by the year 2025. Which facilitates the development of new technologies and ensure a high quality product. Few Indian major players are as under • Ames Foods Processors India Pvt. Ltd. • Ashoka Estate Developers Pvt. Ltd. • Chandra Cashew Imports & Exports Pvt. Ltd. • Goa Forest Development Corpn. Ltd. • Kerala State Cashew Devp. Corpn. Ltd. • Padmavathi Cashews & Coffee Ltd.
Plant capacity: Cashew Nut Processing Unit: 20 MT/Day Plant & machinery: Rs. 155 lakhs
Working capital: -T.C.I: Cost of Project: Rs. 750 lakhs
Return: 31.00%Break even: 62.00%
Add to Inquiry Add to Inquiry Basket

E-Waste & Lithium Battery Recycling Plant

Electronic Waste – or e-waste – is the term used to describe old, end-of-life electronic appliances such as computers, laptops, TVs, DVD players, mobile phones, mp3 players etc.Technically, electronic "waste" is the component which is dumped or disposed or discarded rather than recycled, including residue from reuse and recycling operations. Recycling of used lithium batteries has primarily focused on extracting active metal cobalt (Co) and lithium (Li). According to E-Waste Market in India 2015-2019 research, the need to prevent biological hazards is one of the major trends upcoming in this market. Indians become richer and spend more on electronic items and appliances, computer equipment accounts for almost 70% of e-waste material, followed by telecommunication equipment (12%), electrical equipment (8%) and medical equipment (7%). Other equipment, including household account for the remaining 4%. As a whole any entrepreneur can venture in this project without risk and earn profit.
Plant capacity: E-Waste &Lithium Battery Recycling Plant: 20 MT/DayPlant & machinery: Rs. 225 lakhs
Working capital: -T.C.I: Cost of Project: Rs. 540 lakhs
Return: 26.00%Break even: 59.00%
Add to Inquiry Add to Inquiry Basket

Disposable Plastic Syringes

Disposable Syringes are made of plastic material and are used in the field of medical and veterinary science. Due to their availability in sterilized condition, ready to use, and cost effectiveness, disposable syringes are fast replacing the age-old glass syringes. Disposable Syringes are being used by doctors to inject medicines through intravenous or intramuscular ways for the treatment of diseases & also by research & development personnel. The effective result of the above factors of influence on the market – along with a few others – for disposable syringes is expected to translate to a CAGR of 5.6% from 2015 to 2023.India is witnessing a rapid growth across all segments and categories of medical products. India exported US$ 35.22 million worth of syringes and the overall exported quantity was 719.48 million units. Thus, due to demand it is best to invest in this project. Few Indian major players are as under • Albert David Ltd. • Disposable Medi-Aids Ltd. • Hindustan Syringes & Medical Devices Ltd. • Lifeline Injects Ltd. • Lifelong Meditech Ltd. • Oyster Medisafe Pvt. Ltd.
Plant capacity: Disposable Plastic Syringes: 460 Boxes/DayPlant & machinery: Rs. 115 lakhs
Working capital: -T.C.I: Cost of Project: Rs. 289 lakhs
Return: 18.00%Break even: 67.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 85 of 249 | Total 2486 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 85 248 249   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top