Google Search

Search

Already a Member ?

Best Business Opportunities in Mizoram- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mizoram is a state of India. It is located in the northeastern part of the country and is bounded by Myanmar (Burma) to the east and south and Bangladesh to the west and by the states of Tripura to the northwest, Assam to the north, and Manipur to the northeast. The capital is Aizawl, in the north-central part of the state. Agriculture is the dominant economic activity of Mizoram, engaging more than two-thirds of the workforce. Two types of agriculture are practiced: terrace cultivation, in which crops are planted on relatively permanent, graduated terraces on the sides of hills and mountains to conserve water and reduce soil loss; and shifting agriculture, in which tracts called jhum are cleared by burning, cultivated for a limited period of time. Mizoram has a population of 1,091,014 with 552,339 males and 538,675 females. This reflects a 22.8% growth since 2001 census; still, Mizoram is second least populated state of India. The sex ratio of the state is 976 females per thousand males, higher than the national ratio 940. The density of population is 52 persons per square kilometer. Mizoram gross state domestic product (GSDP) in 2011-2012 was about 6991 crore (US$1.1 billion). The state's gross state domestic product (GSDP) growth rate was nearly 10% annually over 2001-2013 period. With international borders with Bangladesh and Myanmar, it is an important port state for Southeast Asian imports to India, as well as exports from India.

TOURISM

Mizoram, the Land of the Highlanders, is sandwiched between Myanmar, Bangladesh and the states of Tripura, Assam and Manipur. The rivers, peaks, plains and the lakes are the treasures of Mizoram. It is full of high ranges running from north to south covered by greenery throughout the year. The Mizoram State Government begins to recognize tourism as an important sector of the economy which needs to be developed for greater income generation. More emphasis on sustainable eco-tourism, adventure tourism, village tourism and rural tourism would bring in high - value tourism. With the increase of tourist the need for budget hotels has been acutely felt.

Tourism has emerged as an important economic activity and one of the fastest growing industries in the world. Globally, Tourism is the fastest growing industry and in terms of value, it comes third only after petroleum and Transport Industry.

As such, Tourism Department in Mizoram is also one of the fastest growing Departments in Mizoram. The Department has achieved these objectives by constructing Tourist Lodge, Tourist Resort and other Tourist amenities in difference places of Mizoram through liberal financing of Ministry of Tourism, Government of India.


INDUSTRIAL POLICY

The Industrial Policy of Mizoram State was first notified on 15.3.1989 to give direction to the strategy for Industrial development of the State. It laid stress on reducing shifting cultivation by encouraging a shift from primary to secondary sectors while protecting the Socio-Cultural and ethnic identity of the indigenous enterprise of Mizoram.

In view of the National Industrial Policy which laid special emphasis for the development of Industries in the North Eastern Region, the Govt. of Mizoram had notified new Industrial Policy 2000 for accelerated Industrial and Economic development of the State. The Government had adopted the approach for identification of thrust areas and promoting them with fiscal and other incentives packages. Broad policy of Foreign Direct Investment (FDI) and Investment from outside the State has been adopted on Joint venture (JV) mode to safeguard the interest of the tribal population of Mizoram. Various administrative support system and market support system are also announced. The Govt. of Mizoram is mandated in giving sustainable employment and introducing better utilization of land by introducing New Land Use Programme (NLUP).

OBJECTIVES

•        To create infrastructure facilities, provide incentives and marketing as well as technical support to industries.

•        To provide skill development and training for educated youth to develop entrepreneurial skills and make them self-employed.

•        To create employment opportunities particularly to the vulnerable section of the society and people in rural area, ensuring inclusive development.

•        To reduce sectoral and regional imbalance in the industrial development in the State by promoting Industries under all sectors.

•        To create proper linkage of processing Industries with the farm produce of agriculture, horticulture, forest and livestock’s.

•        To attract investment in the state.

IDENTIFICATION OF THRUST AREAS

Thrust will be given for those industries based on value addition of locally available resources. Special incentives will be formulated for speedy development of industrial units engaged in any of the following thrust sector Enterprises.

•        Forest-based Industries

The vast bamboo and other forest resources of Mizoram will be optimally harvested for setting up of Industry for manufacturing of various high value bamboo and other forest based products.

•        Food Processing Industries

Primary production of various food items, whether agricultural based, horticultural or livestock based will be linked with processing Industries.

•        Handloom Industries

Handloom sector will continue to receive serious attention of the Govt. Utmost importance will be given for improving quality product by introducing improved design, packaging, branding.

•        Handicraft Industries

The traditional skill of Mizo people will be upgraded and diversified for market competitiveness of handicraft products.

•        Plantain fibre and hill brooms

The Govt. will encourage value addition of hill-brooms. The flow of raw and unprocessed broom outside the state will be discouraged by giving attention towards value addition to help local industry.

•        Textile related industries

Bulk production of readymade garments will be encouraged as this sector is having good potential for market outside the state and export.

•        Animal Feed and poultry feed Industries

The Government is giving thrust towards having sufficient meat and meat products for which farming has been encouraged.

INCENTIVES

The incentives offered under the Rules for the grant of incentives/subsidies under the Industrial Policy of Mizoram State are-

•        Subsidies on the cost of Project Report 

•        Land subsidy

•        Factory rent subsidy

•        Manpower development subsidy

•        Interest subsidy

•        Power subsidy

•        Subsidy on Power Line 

•        Subsidy on Power Generating set

•        State Transport subsidy on Plant and Machinery 

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 5 of 199 | Total 1985 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 198 199   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Poultry Feed - Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Cost of Project

Poultry feed is needed to produce poultry, a substantial part of the food industry. Feeds are used as edible materials, which are consumed poultry and contribute energy and/or nutrients to the poultry diet. Feed is needed to produce poultry, which are substantial parts of the food industry. Poultry includes the following: Chickens, Turkeys, Ducks, Guineas, Pigeons, Pheasant, Ostrich, Peafowl and Swan etc. The size of the food industry depends on population, which is not constant. Two international Hatcheries viz. the Arbor Acres and the shaver, which started their operation in India in early 1960’s, created a large market for quality poultry feeds in North as well as in Western India. It was formed necessary to provide well-balanced feed to the hybrid birds to exploit their genetic potential to the maximum. Efficient chick starter and growing mashes aid proper development of chicks and pullets. Proteins, largely of vegetable origin, in the growing mesh, encourage the normal development of pullets and help them to lay lower. These are fed to which when they are 24 hours old. Industries playing increasing roles in the struggle against world hunger include the poultry industry, which require less capital to enter than other animal industries, and the feed industry, which provides economical, feeds upon which the poultry industry depends. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under:- Intercorp Biotech Ltd. Japfa Comfeed India Pvt. Ltd. Jupiter Biotech Ltd. Kapila Krishi Udyog Ltd. Kerala Feeds Ltd. Khandesh Extraction Ltd. Kirti Dal Mills Ltd. Kumar Food Inds. Ltd. Kwality Dairy (India) Ltd. Kwality Feeds Ltd. Lakshmi Energy & Foods Ltd. Laxmi Starch Ltd. Lipton India Ltd. Maharashtra Agro-Inds. Devp. Corpn. Ltd. Maheshwari Solvent Extraction Ltd. Mapro Industries Ltd. Nova Chemie (India) Ltd. Origin Agrostar Ltd. Parakh Foods Ltd. Piccadily Agro Inds. Ltd. Pioneer Feeds & Poultry Products Pvt. Ltd. Pranav Agro Inds. Ltd. Prima Agro Ltd. Puri Oil Mills Ltd. Rainbow Agri Inds. Ltd. S K M Animal Feeds & Foods (India) Ltd.
Plant capacity: 72000 MT/ AnnumPlant & machinery: Rs. 294 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 1167 Lakhs
Return: 29.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Contact Adhesive - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

An adhesive is any substance applied to the surfaces of materials that binds them together and resists separation. The term "adhesive" may be used interchangeably with glue, cement, mucilage, or paste. Adjectives may be used in conjunction with the word “adhesive” to describe properties based on the substance's physical or chemical form, the type of materials joined, or conditions under which it is applied. The use of adhesives offers many advantages over binding techniques such as sewing, mechanical fastening, thermal bonding, etc. These include the ability to bind different materials together, to distribute stress more efficiently across the joint, the cost effectiveness of an easily mechanized process, an improvement in aesthetic design, and increased design flexibility. Adhesives may be found naturally or produced synthetically. The earliest human use of adhesive-like substances was approximately 200,000 years ago. There is hardly any product in our surroundings that does not contain at least one adhesive – be it the label on a beverage bottle, protective coatings on automobiles or profiles on window frames. Applicators of different adhesives are designed according to the adhesive being used and the size of the area to which the adhesive will be applied. The adhesive is applied to either one or both of the materials being bonded. The pieces are aligned and pressure is added to aid in adhesion and rid the bond of air bubbles. Polychloroprene contact adhesives are used for bonding high-pressure laminates, automotive trim, roofing-membrane attachment, furniture, kitchen cabinets, custom display cabinets, interior and exterior panels, wall partitions, shoe soles, and many other applications where quick, high-strength, permanent bonds are needed. Thus, as an entrepreneur, contact adhesive production offers an exciting opportunity to you.
Plant capacity: Contact Adhesive: 160 Kgs/DayPlant & machinery: Rs 32 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 220 Lakhs
Return: 10.00%Break even: 64.00%
Add to Inquiry Add to Inquiry Basket

Mattress & Quilt - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

A mattress is a large pad for supporting the reclining body, used as or on a bed. Mattresses may consist of a quilted or similarly fastened case, usually of heavy cloth, that contains hair, straw, cotton, foam rubber, etc.; a framework of metal springs; or they may be inflatable. Mattresses are usually placed on top of a bed base which may be solid, as in the case of a platform bed, or elastic, e.g. with an upholstered wood and wire box spring or a slatted foundation. Flexible bed bases can prolong the life of the mattress. Popular in Europe, a divan incorporates both mattress and foundation in a single upholstered, footed unit. Divans have at least one innerspring layer as well as cushioning materials. They may be supplied with a secondary mattress and/or a removable "topper." A quilt is a type of blanket, traditionally composed of three layers of fiber: a woven cloth top, a layer of batting or wadding, and a woven back, combined using the technique of quilting. A quilt is distinguishable from other types of blanket because it is pieced together with several pieces of cloth. “Quilting” refers to the technique of joining at least two fabric layers by stitches or ties. In most cases, two fabric layers surround a middle layer of batting (cotton, polyester, silk, wool or combinations of fibers) which is a lighter, insulating layer. Batting is often referred to as “wadding” in Britain. Some modern quilts are made with an upper fabric layer, quilted to a layer of microfleece, perhaps without a fabric backing. The most decorative fabric surface is called the “top”, and is the design focus. A single piece of fabric (a “whole cloth quilt”) may be used as the top, or the top may be “pieced” from smaller fabric pieces. Sewing together smaller pieces of fabric into a larger patchwork "block" of fabric creates the basic unit. Few Indian Major Players are as under • Dunlop Comforts Pvt. Ltd. • Gandhigram Rubbers Ltd. • India Tyre & Rubber Co. (India) Ltd. • Kontak Comforts Pvt. Ltd. • M B I Intercorp Ltd. • M M Rubber Co. Ltd. • Oriental Veneer Products Ltd. • Southern Latex Ltd.
Plant capacity: Mattress 200 Nos/Day, Quilt:1000 Nos/DayPlant & machinery: Rs 63 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 364 Lakhs
Return: 28.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Cold Storage - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Cost of Project

India is the largest producer of fruits and second largest producer of vegetables in the world. Fruits & vegetables, being perishable in nature require certain techniques of preservation for retaining the freshness intact and making them an acceptable item even after few days of ripening. It also facilitates the farmer to realize a better price instead of selling the product at a throw away price due to the perishability. This necessity as evolved a new concept of storing these items at below or just above sub-zero temperatures known as cold storage. Introduction of Cold storage / Cold room facility will help them in removing the risk of distress sale and simultaneously will ensure better returns. The annual production of fruits and vegetables in the country accounts for 18 to 20% of our agriculture output. Varied agro climatic conditions and better availability of scientific package of practices, there is a vast scope for increasing the production. Cold Storage is a special kind of room, the temperature of which is kept very low with the help of machines and precision instruments. India is having a unique geographical position and a wide range of soil, thus producing variety of fruits and vegetables like apples, grapes, oranges, potatoes, chillies, ginger, etc. Marine products are also being produced in large quantities due to large coastal areas. As per 2008-09 figures, India produces around 215 Million Tons of Fruits and Vegetables, 3 Billion Tons of Marine Products, 109 Million Tons of Milk, 56 Billion Eggs and 38 Million Tons of Meat per annum. Commercially apples, potatoes, oranges, etc are stored on large scale in the cold storages. Other important costly raw materials like dry fruits, chemicals, essences and processed foods like fruit juice/pulp, concentrate dairy products, frozen meat, fish and eggs are also stored in cold storages to regulate marketing channels of these products. Therefore, it is a good project for entrepreneurs to invest. Uses Cold storage is used to preserve fruits and vegetables. Once they are kept in the cold storage, they do not get spoiled even after many months. Sometimes, in production season of certain vegetable or fruit crops, the demand for those thing decreases, which in turn decreases the consumption in surplus amount of that particular item and it is kept in a cold storage. Few Indian Major Players are as under • Allana Cold Storage Ltd. • Anjaneya Cold Storage Ltd. • Asvini Fisheries Pvt. Ltd. • H M G Industries Ltd. • Hindusthan Ice & Cold Storage Co. Ltd. • Ideal Ice & Cold Storage Co. Ltd. • Indagro Foods Ltd. • Jindal Steel & Alloys Ltd. • Karnavati Cold Storage Ltd. • Karnimata Cold Storage Ltd. • Kisan Cold Storage & Refrigeration Service Ltd. • Mohan Meakin Ltd. • Nav Bharat Refrigeration & Inds. Ltd. • Prabhu Hira Ice & Cold Storage Ltd. • Ram'S Assorted Cold Storage Ltd. • Sri Vatsa Hotels Ltd. • Universal Cold Storage Pvt. Ltd. • Uptown Trading & Investments Ltd.
Plant capacity: 3000 MTPlant & machinery: Rs 266 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 882 Lakhs
Return: 26.00%Break even: 43.00%
Add to Inquiry Add to Inquiry Basket

PVC Wire & Cables - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

The generation, transmission, and distribution of power involve electrical facilities, apparatus, and components, to carry the electrical energy from its generating site to where it is utilized. An important part of this power system is the cable system that is used exclusively to carry power from the main substations to secondary substations at load centers. Low-voltage cable is used to distribute power from the load centers to utilization equipment in conduits and ducts, even though other methods such as cable trays, direct burial for outdoor applications, and aerial cable are used. Electrical, mechanical, and environmental considerations are the main factors in selecting and applying cable systems for distribution and utilization of electrical power. Cables are the source of carrying power and signal in power plants, refineries, process industries. Cable network can carry fire from one place to another in the event of fire caused due to external sources or due to short circuit. Power cable industry in India is eyeing an estimated Rs 50 bn market to unfold. About 78,000 MW of power generation capacity and 60,000 circuit km of transmission network are projected to be added by 2012 according to the Eleventh Five Year Plan. Capex required for every MW of power generating capacity is about Rs 40 mn. Expenditure required in the Eleventh Five Year Plan for power generation has been estimated at Rs 270 bn. As a whole it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Bindawala Cables & Conductors Ltd. • Gem Cables & Conductors Ltd. • I L A C Ltd. • Industrial Cables (India) Ltd. • Omega Cables Ltd. • Opal Industries Ltd. • Sanco Industries Ltd. • Skytone Electricals (India) Ltd. • Torrent Cables Ltd. • Universal Cables Ltd. • Vimal Flexsol Ltd.
Plant capacity: Single Core Wires (THHN/THWN) 60 KM/Day,Single Core Stranded (CU/PVC)45 KM/Day,Multiple-Core Flexible-Wire (Sheathed)21 KM/DayPlant & machinery: Rs 55 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 189 Lakhs
Return: 31.00%Break even: 71.00%
Add to Inquiry Add to Inquiry Basket

Medical College with Hospital - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Cost of Project

A medical college is meant to impart education of medical field to students to qualify them as doctors in different specialized disciplines so as to treat patients suffering from various ailments. Doctors with their dedicated spirit serve the nation at large by providing medication and treatment for eradication of diseases, which exchange health and add suffering to humanity. Normally a medical college is associated with a hospital. Hospitals provide the facilities of O.P.D. and admission for seriously ill seriously injured, seriously burnt and pregnant ladies, causalities etc. Presently, every city or town in India has no. of private hospitals furnished with latest medical facilities available and with more qualified surgeons, physicians and specialist doctors. Even sometimes, they are furnished with more modern machines than those available in the nearby Government Hospital. These hospitals can be seen well crowded as they provide very good service at a smile. As they are run by privates very good medical care is provided by them. A private hospital is a place where one may get treatment from ordinary fever to a major surgery operation. As a matter of fact, no limitation has been made for the facilities available in a hospital. However, generally all private hospitals are provided with latest facilities and ultra modern machines. In a hospital, surgeons, physicians, E.N.T., specialists, children specialist, Eye-surgeon, psychologists and sex-specialist are essential.
Plant capacity: Total Students per Annum:150 Students Admitted/Annum 700 Beded HospitalPlant & machinery: Rs 2047 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 31862 Lakhs
Return: 1.00%Break even: 36.00%
Add to Inquiry Add to Inquiry Basket

Milk Powder (SMP, WMP and Dairy Whitener) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Powdered milk is a dairy product produced from cow milk. Cow milk basically contains water, fats, protein sugar and ash. About 86% to 88% of cow milk by weight is water. Milk powder is prepared by skimming the milk whereby a considerable but proportional cream substance is extracted before it is powdered. The processed milk powder, after some vitamins are added is packed in fully galvanized metal cans or plastic bags. Skimmed milk powder is deficient in fat and fat soluble vitamins but the proteins, water-soluble vitamins and minerals are preserved. Skimmed milk powder contains almost the same amount of proteins (26%) and carbohydrates (37%) as in the liquid form. However the water and the fat percentage is decreased to nil. As it is considered to be zero fats, it is a good substitute of whole milk and can be taken by patients with high cholesterol levels and cardiac problems. Skimmed Milk powder is also fortified with vitamins A and D. Vitamin A helps to improve vision whereas Vitamin D helps in the strengthening on bones. Both the vitamins play an important role in maintenance and repair of Skin. The calcium present in it promotes growth and maintenance of teeth and bones at every stage in life. Dairy Whitener is an alternative to making availability of condensed milk more convenient for people. In a vast country like India, any product’s availability is a matter of concern. The Dairy Whitener is prepared to keep intact the richness, smoothness and original taste which when added to tea or coffee adapts well. It is primarily preferred for being fat free with the process of skimming done in confirmation with the highest standards of quality. India is a major consumer of tea and coffee, which offers a very large market for dairy creamers. In addition to domestic consumption, the whiteners/creamers find a high level of institutional acceptance, especially by railways; hotels and restaurants; airlines; hospitals and nursing homes; and corporate offices. Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • Anik Industries Ltd. • Brooke Bond Lipton India Ltd. • Continental Milkose (India) Ltd. • Haryana Milk Foods Ltd. • Hatsun Agro Products Ltd. • Heritage Foods Ltd. • Herman Milkfoods Ltd. • Industrial Progressive (India) Ltd. • Kamala Sugar Mills Ltd. • Milk Specialities Ltd. • Narayan Agro Foods Ltd. • Olam Exports (India) Ltd. • P G Foods & Brewaries (I) Ltd. • Panchmahal District Co-Op. Milk Producers' Union Ltd. • Param Dairy Ltd. • Parul Foods Specialities Pvt. Ltd. • Premier Industries (India) Ltd. • S M Milkose Ltd. • Sarthak Industries Ltd. • Suman Agritech Ltd. • Swojas Energy Foods Ltd. • Umang Dairies Ltd.
Plant capacity: Skimmed Milk Powder 8.00 MT/Day • Whole Milk Powder 2.67 MT/Day • Dairy Whitener 1.50 MT/DayPlant & machinery: Rs 387 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 973 Lakhs
Return: 27.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Instant Tea - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Tea is cultivated primarily in the Asian countries, and world's largest producers of tea are India, Sri Lanka, and China. The tea plant is similar to the coffee plant, in that it is an evergreen tree or bush which grows chiefly in the tropics or in subtropical regions of the world. Tea plants require regular but moderate rainfall. Uses of Tea Extract • Tea is used as potting mix • Tea is used as vermicompost • Tea is used as compost tea • Tea is used as source of potassium • Tea is used as medium for mushroom cultivation • Tea waste is virtually as rich in effective antioxidants, such as catechins. Black tea is generally prepared by subjecting green tea leaves to various process conditions such as withering, rolling, disintegrating, fermenting, firing etc, during which enzymatic reactions are initiated in the tea leaves and the characteristic aroma, colour and flavour of black tea are developed. Black tea extract is produced by treating black tea leaves with warm water. The extract produced contain soluble tea solids as well as insoluble solids. The insoluble solids are discarded and the supernatant is processed further to recover any left over desirable tea properties such as flavor, aroma etc. Instant tea is not a new concept but somehow or other it has not received as much popularity as instant coffee. In India there are only two manufacturers of instant tea, namely Food Specialities Ltd., and Tata Teas Ltd. Food Specialities has a pilot plant and has not yet started with commercial production. Tata Teas Ltd., has a higher share in the market accounting for almost 70 percent. Any entrepreneur venture into this field will be successful. ? Few Indian Major Players are as under • Brooke Bond Lipton India Ltd. • Eximpo Tea Ltd. • Goodricke Group Ltd. • Tetrahedron Ltd. • Tyford Tea Ltd.
Plant capacity: Black Instant Tea 2.5MT/Day • Green Instant Tea 2.5 MT/Day Plant & machinery: Rs 165 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 800 Lakhs
Return: 27.00%Break even: 43.00%
Add to Inquiry Add to Inquiry Basket

Laundry Unit - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

There is cleaning requirement everywhere. Cleanliness is the source of beauty and also the placement of God. Laundry unit is one of the unit by which dirty clothes are cleaned by operation. In older ages there is a system of washer men who collect the dirty clothes from house to house and return the clothes after cleaning within seven days. But now a day, with the growth of Urbanization, washing of cloths has turned out to be a commercial proposition and led to the establishment of modern dry cleaning units in the cities as well in big towns. The services of these units are very prompt and efficient. The occupation includes all types of cleaning, dyeing, bleaching and dry cleaning. The occupation has changed with the passage of time. Laundry has long recognized that although community laundry rooms require utilities – water and energy – to operate, installing state of the art equipment and providing state of the art technology will minimize the environmental impact of its laundry rooms. Mechanized Laundry works closely with its manufacturing partners and customers to provide the most technologically advanced and energy friendly equipment available to reduce the impact laundry rooms have on the environment. Dry Cleaning unit is servicing industry. The process of conventional cleaning, prevailing in nook and corner of cities and towns is slowly refused by people and Dry Cleaning process is preferred instead. Disadvantage in conventional cleaning, like river or well cleaning causes damage to expensive synthetic dress material and furnishings. The major target market for the Automatic Laundry system depends on the location where laundry unit business is situated. The target customers for proposed business will not only be general public but also the commercial sector i.e. hostels, hotels, catering companies, film industry, train service and hospitals. ? Automatic Laundry system may come under the large scale industry to small scale industry unit. Now a day there is a very good export scope of garments. In garment industry there is requirement of automatic laundry system or dry cleaning unit. People of today are very particular about their dress material, furnishing, linen etc, People prefer to wear and use expensive and well cleaned and ironed dress materials. Furnishing, linen etc especially during public appearances. This has opened the scope for laundry and Dry Cleaning units. Any entrepreneur venture into this field will be successful.
Plant capacity: Washing & Iron: 700.0 Pcs/ dayPlant & machinery: Rs 48 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 145 Lakhs
Return: 21.00%Break even: 51.00%
Add to Inquiry Add to Inquiry Basket

Grain & Potato Based Vodka Distillery - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Vodka is a neutral spirit that is without distinctive character, aroma, taste, or color. These properties are developed during the distillation process or by treating crudely distilled spirits with activated carbon or other materials. Finely distilled vodka may also be further purified and refined by treatment with activated carbon and other materials. Vodka is usually not aged and can be made from grains, potatoes, sugars, fruits, and just about anything else that can be fermented to produce alcohol. This makes vodka an economical spirit that can be made easily in a short amount of time from readily available materials. It is made by fermenting and then distilling the simple sugars from a mash of pale grain or vegetal matter. Vodka is produced from grain, potatoes, molasses, beets, and a variety of other plants. Rye and wheat are the classic grains for Vodka, with most of the best Russian Vodkas being made from wheat. Alcohol has a depresent effect on the central nervous system and not a stimulating effect as was formerly supposed. A strong does of alcohol introduced into the stomach increases heart beat and causes rise in blood pressure. Hence, the use of brandy as a rostorative. Alcohol possesses excellent solvent properties and it is used for the extraction of several drugs and for the manufacture of tinctures and other medicinal preparation. It is also employed for the extraction of essential oil; and for the preparation of perfumes; essences and flavours. Vodka is produced in India by very few brands; hence this list includes mostly IMFL (Indian Made Foreign Liquor) and imported brands available in the market currently. Therefore, it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Allied Blenders & Distillers Pvt. Ltd. • Amber Distilleries Ltd. • Amrut Distilleries Ltd. • B D A Breweries & Distilleries Ltd. • B D A Pvt. Ltd. • Bacardi India Pvt. Ltd. • Balaji Distilleries Ltd. • Balbir Distilleries Ltd. • Baramati Grape Inds. Ltd. • Beam Global Spirits & Wine (India) Pvt. Ltd. • Central Distillery & Breweries Ltd. • Chhattisgarh Distilleries Ltd. • Empee Distilleries Ltd. • Hyderabad Distilleries & Wineries Ltd. • Interlink Exports Ltd. • Jagatjit Industries Ltd. • John Distilleries Pvt. Ltd. • Jubilant Industries Ltd. • Jubilee Beverages Ltd. • Kedia Distilleries Ltd. • Kerala Alcoholic Products Ltd. • Kerala Distilleries & Allied Products Ltd. • Kesarval Springs Distillers Pvt. Ltd. • Khemani Distilleries Pvt. Ltd. • Khoday India Ltd. • Mcdowell & Co. Ltd. • Mehra Beverages Ltd. • Mohan Breweries & Distilleries Ltd. • Mohan Rocky Springwater Breweries Ltd. • Narmada Distilleries Pvt. Ltd. • Nuway Organic Naturals India Ltd. • Pearl Distillery Ltd. • Pernod Ricard India Pvt. Ltd. • Piccadily Sugar & Allied Inds. Ltd. • Prag Distillery Pvt. Ltd. • Punjab Expo Breveries Pvt. Ltd. • Raj Breweries Ltd. • Ravikumar Distilleries Ltd. • S D F Industries Ltd. • Salamander Distillers Ltd. • Seagram Distilleries Pvt. Ltd. • Shaw Wallace & Co. Ltd. • Shaw Wallace Distilleries Ltd. (Maharashtra) • Shiva Distilleries Ltd. • Silver Oak (India) Ltd. • Southern Agrifurane Inds. Ltd. • Southern Agrifurane Inds. Pvt. Ltd. • Surya Organic Chemicals Pvt. Ltd. • Swarup Vegetable Products Inds. Ltd. • Tilaknagar Distilleries & Inds. Ltd. • Tilaknagar Industries Ltd. • Travancore Sugars & Chemicals Ltd. • Unitech Country Club Ltd. • Utkal Distilleries Ltd. • V R V Breweries & Bottling Inds. Ltd. • Vahni Distilleries Pvt. Ltd. • Vinayak Distilleries Ltd. • Vitari Distilleries Ltd. • Xylon Loquitur Distillers & Vintners Ltd.
Plant capacity: Vodka from Grain & Potato:30 KLs/DayPlant & machinery: Rs 3845 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 6316 Lakhs
Return: 25.00%Break even: 41.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 5 of 199 | Total 1985 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 198 199   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top