REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Best Business Opportunities in Jharkhand- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mining & Minerals: Project Opportunities in Jharkhand

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

The newly carved out resource rich State of Jharkhand is widely acclaimed as the region of the future, having immense potential for industrialisation with its large deposits of minerals which could provide a firm launching pad for various industries.

RESOURCES:

Jharkhand is one of the richest zones of minerals in the world. The 40% of the total minerals of the country are available in this state. The State is the sole producer of cooking coal, uranium and pyrite. It ranks first in the production of coal, mica, kyanite and copper in India. The geographical exploration and exploitation of gold, silver, base metals, decorative stones, precious stones, etc. are the potential areas of the future. Jharkhand is also endowed with other resources such as surface and ground water, land with immense bio-diversity, moderate climate, disciplined and skilled manpower, adequate availability of power, which are the basic essentials for the growth and development of industries.

GOVERNMENT POLICIES:

Jharkhand region is generously endowed with Mineral Wealth and the State Government is committed to create an environment conducive to the growth of Mining and Mineral based Industries in the State. In view of this, the State's Industrial policy covers certain clauses relevant for Mining and Mineral sector, which are enumerated below:

•        Simplify procedures and expedite granting of mining leases.

•        Provide certain relief to make mining activities easier.

•        Encourage use of modern exploration techniques to set up a resource inventory of various minerals in the State.

•        Encourage joint venture projects with SMDC.

•        Clear mining lease applications and project report within 60 days.

•        Encourage foreign investment and technological collaboration by OCBs and NRIs in selected sectors including Mineral development.

•        Encourage Private Sector participation in Mining Activities

Jharkhand State Mineral Development Corporation Ltd. was incorporated on 7th May, 2002 after bifurcation from Bihar State Mineral Development Corporation Ltd. JSMDC is a Government of Jharkhand Undertaking under the Dept. of Mines & Geology, Govt. of Jharkhand. It is premier producer and supplier of minerals and mineral based products in the State of Jharkhand. Core business of the Company is production and marketing of coal, limestone and its powder, kyanite, graphite, granite blocks and manufacturing of granite tiles of smaller dimensions. JSMDC is a consistently making profit company. Annual turnover is more than 100 Crores in the current fiscal year.

 

 

 

Agro-Based Industries: Project Opportunities in Jharkhand

 

 

PROFILE:

 

Agro-based industry would mean any activity involved in cultivation, under controlled conditions of agricultural and horticultural crops, including floriculture and cultivation of vegetables and post-harvest operation on all fruits and vegetables. The development of agro-industries has assumed crucial importance in the economic planning and progress of the country. The agro industry is regarded as an extended arm of agriculture. The development of the agro industry can help stabilise and make agriculture more lucrative and create employment opportunities both at the production and marketing stages. The broad-based development of the agro-products industry will improve both the social and physical infrastructure of India. Since it would cause diversification and commercialization of agriculture, it will thus enhance the incomes of farmers and create food surpluses. The state of Jharkhand having diversified agro-climatic conditions is much suited for the development horticulture based economy that has ample scope for its growth.

RESOURCES:

The agro-climatic conditions of the State are conducive for commercial cultivation of large varieties of fruits, vegetables,flowers and medicinal and aromatic plants. Plantation and Horticulture is one of the important sub sectors of Agriculture having ample scope for expansion in the state of Jharkhand. The state of Jharkhand has a total geographical area of 79.7 lakh ha out of which cultivable land is 38 lakh ha. The net irrigated area is only 1.57 lakh ha which is only 8% of the net sown area. The total area occupied for plantation and horticulture crop in the state is about 2.57 lakh hectares. Different kinds of fruits are grown in Jharkhand. The crops grown in Jharkhand are Mango, Litchi, Stone fruit (Peach), Citrus (Lime/Lemon), Awla and Papaya in fruits, Chilli, Turmeric and Ginger in spices, Rose, Marigold, Gerbera, Carnation and Gladiolus among flowers, Lemon grass, Palmarosa and Rosa damascena in aromatic plants, Cashew in Plantation crops. Jharkhand endowed with vast impounded fresh water resources in the form of tank/ponds and reservoirs. The major plantation crops cultivated in the State are cashew nut and coconut. The Board has identified the State as high potential State for coconut cultivation as the average productivity of coconut palm is 36 nuts per palm, which is above the national average of 34 nuts. Cashew nuts popularly known as a gold mine of wastelands is very ideal for cultivation in wastelands and hence there is good potential for cashew cultivation especially in East and West Singhbhum districts. Tea plantation in a small measure has been taken up in Ranchi district, which has a favourable climate for growing tea.

 

 

 

GOVERNMENT POLICIES:

 

 The promotion of Agro-based industries is among the priorities of the State Government. The state has assured supply of fruits & vegetables grown by applying scientific techniques, investment in post harvest and good transport infrastructure. The National Horticulture Mission (NHM) in the Jharkhand State was launched in late 2005-06 initially in 10 districts with main focus on production of planting materials, vegetable seed production, establishment of new gardens, creation of water resources etc. Establishment of new gardens include perennial and non perennial fruits, spices, floriculture, aromatic and medicinal plants. This scheme was 100 % sponsored by Central Govt. during 2005-06 and 2006-07 (Xth Five Year Plan). However, during 2007-08 and onwards (XIth Five Year Plan) this scheme has been implemented in 15 districts with the pattern of assistance as 85:15 by Central Govt. and State Govt. respectively. The Jharkhand government has decided to set up a food park to kick off the development of the food processing sector in the state and attract investors. In general very few small scale food processing industries are present in the state.

 

 

 

 Sericulture (Tasar Silk): Project Opportunities in Jharkhand

 

PROFILE:

Sericulture is an agro-based industry. It involves rearing of silkworms for the production of raw silk, which is the yarn obtained out of cocoons spun by certain species of insects. The major activities of sericulture comprises of food-plant cultivation to feed the silkworms which spin silk cocoons and reeling the cocoons for unwinding the silk filament for value added benefits such as processing and weaving. Silk is a fine strand of fiber that is a solidified secretion produced by certain caterpillars to encase themselves in the form of cocoons. India is second largest producer of silk. Sericulture industry is looking out for the developments of young age silk worm rearing or chawki rearing. Care of silk worms start from the stage of procurement of silk worm eggs from the grainage itself. Silk worm eggs are distributed to the farmers for commercial rearing when active development of embryo is in progress. The important aspect of young silkworm rearing management are a suitable separate rearing house or room, well maintained mulberry garden with assured irrigation facilities. Sericulture has emerged as a virtual lifeline and a profitable employment avenue for villagers in Maoist-affected areas in India's eastern Jharkhand. Under the aegis of the Jharkhand state industrial department, farmers are beginning to rear silkworms.

RESOURCES:

Jharkhand, much like Chattisgarh and Uttaranchal, is endowed with adequate forest cover. These forests are home to two species of trees -Arjuna (Terminalia Arjuna) & Asan (Terminalia Tomentosa) which are breeding ground for the moth which produces the cocoon from which Tasar yarn is reeled. Jharkhand's forest department is also planning to encourage planting of Arjuna trees in place of the traditional Acacia or Eucalyptus trees. Tussar Food plants are available over an area of 9 lakh hectares. The Singhbhum and Santhalpargana regions are the main silk producing centres in the State. The State is promoting this activity through 28 pilot project centres situated in different areas. Each rearer can rear on an average 200 eggs or Disease Free Laying (DFLs) so the annual demand of commercial seed or egg is of 130 lakh. There are three types of seeds or eggs – Nucleus, Basic seed and Basic seed multiplied to commercial seed.

GOVERNMENT RESOURCES:

Tasar culture is a backbone for Tribal development, and the Government of India, through the Central Silk Board and different State Governments have initiated several developmental and welfare measures for the tribal welfare through it. Jharkhand's forest department is also planning to encourage planting of Arjuna trees in place of the traditional Acacia or Eucalyptus trees. Jharkhand Sericulture Development Institute (JSDI) and Jharkhand Silk Technical Development Institute (JSTDI) are being strengthened to give an impetus to this sector. During the year 2010-11, it is proposed to rear 2.35 lakh tasar nucleus DFLs, 16 lakh of tasar basic DFLs and 96 lakh of commercial DFLs through seed and commercial rearers in the State. It is proposed to be benefited 40,000 -50,000 Tasar farmers through Tasar seed production and its rearing during the year.

 

Steel Industry

 

PROFILE:

Steel Industry is a booming industry in the whole world. India’s economic growth is contingent upon the growth of the Indian steel industry. Consumption of steel is taken to be an indicator of economic development. While steel continues to have a stronghold in traditional sectors such as construction, housing and ground transportation, special steels are increasingly used in engineering industries such as power generation, petrochemicals and fertilisers. Indian Steel Industry is more than a century old. India has now emerged as the eighth largest producer of steel in the world with a production capacity of 35MT. Almost all varieties of steel is now produced in India. India has also emerged as a net exporter of steel which shows that Indian steel is being increasingly accepted in the global market. The growth of the steel industry in India is also dependant, to a large extent, on the level of consumption of steel in the domestic market. Steel consumption is significant in housing and infrastructure. In recent years the surge in housing industry of India has led to increase in the domestic demand for steel.

 

 

RESOURCES:

Jharkhand emerges as hub for steel companies. The state is endowed with deposits of Iron Ores of both, Hematite & Magnetite. The Hematite deposits are mainly located in the West Singhbhum District and have a resource base exceeding 3700 Million Tonnes. These have been explored only in pockets by large industry houses in their lease hold. There is a very good scope of enlarging this resource base by further exploration. The Magnetite Deposits are located in the East Singhbhum, Latehar & Palamu districts. They comprise lenticular ore bodies as well as Schist rocks with 80 to 36% magnetic. The exploration of these bodies is yet to be taken up. The existing steel mills are sourcing their iron ore (Hematite) from West Singhbhum. The Magnetite ore is being used in heavy media coal washeries & paints. Tata Steel's largest plant is located in Jamshedpur, Jharkhand, with its recent acquisitions; the company has become a multinational with operations in various countries. If the interest shown by all the companies, big and small, in Jharkhand's iron ore deposits translates into reality, the state will produce more than half the total steel in India. First Iron & steel factory  is located at Jamshedpur and Largest Steel plant in Asia is Bokaro steel plant.

 

GOVERNMENT POLICIES:

Under the new industrial policy, iron and steel has been made one of the high priority industries. Price and distribution controls have been removed  as well as foreign direct investment up to 100% (under automatic route) has been permitted.  The Trade Policy has also been liberalized and import and export of iron and steel is freely allowed with no quantitative restrictions on import of iron and steel items. Tariffs on various items of iron and steel have drastically come down since 1991-92 levels and the government is committed to bring them down to the international levels.  With the abolishing of price regulation of iron and steel in 92, the steel prices are market determined. The policy devises a multi-pronged strategy to achieve these targets with following focus areas; removal of supply constraints especially availability  of critical inputs like iron ore; improve cost competitiveness by expanding and strengthening the infrastructure in roads, railways, ports and power; increase exports; meet the additional capital requirements by mobilizing financial resources; promote investments by removing  procedural delays. In addition the policy also addresses challenges arising out of environmental concerns, human resource requirements, R&D, volatile steel prices and the secondary sector. 

 

Rural Industries: Project Opportunities in Jharkhand

 

PROFILE:

Rural industry is an important source of employment for workers shifting out of agriculture. The rural industry continues to play a significant role in the expansion ofemployment, improvement in productivity and earnings, and poverty reduction in many non-industrialized countries; this is particularly the case in India. This sector has immense export potential which needs to be exploited to earn foreign exchange. To give thrust, the government aims to provide benefits in the various areas such as handloom, handicrafts, khadi village industries, forest based industries etc.

RESOURCES:

Handloom is labour intensive cottage industry sector providing employment to around 1.5 lakh weavers throughout the State. Various incentives to the handloom weavers are being provided under Deendayal Hastkargha Protsahan Yojana, which aims attaking care of wide gamut of activities, such as basic inputs like looms and accessories, product development, infrastructure support, institutional support, training to weavers, supply of equipment and marketing support, both at micro and macro levels in an integrated and coordinated manner for an overall development of the sector and benefit to handloom weavers. Handicrafts of Jharkhand reflect the cultural heritage, customs and traditions of the State. The State manufactures handicrafts in cane and bamboo works, woodcarving, stoneware, brassware, Lac based handicraft items, paper mache, terracotta, etc. The State Government may set up a model suitable ‘Handicraft Village’ in each of the districts of the State for promoting the traditional arts and crafts of the villages by adopting the "One Tambon One Product" model of Thailand. Various forest produce available in the state are mahua seed, sal seed, shellac, bamboo, kendu leaf, harre, bahera, etc.

 

GOVERNMENT POLICIES:

Focus of the Rural Industrial Policy:-

1.       Providing ample employment opportunities through rural industries.

2.       Establishing rural industries and providing help on priority basis for skill enhancement, modern technology, and marketing especially for beneficiaries of scheduled caste, scheduled tribe, backward, and minority sections.

3.       Giving priority to participation of women in development of rural industries.

4.       Encouraging participation of private sector, non-governmental organizations, cooperative societies, and self help groups for development of rural industries.

5.       Implementing cluster approach.

6.       Value addition to the minor forest produce and medicinal herbs in the tribal areas of the state itself and passing on the benefits to the tribal population of the area.

7.       Connecting rural industries with E-commerce.

With the implementation of the Rural Industrial Policy, active participation of experienced craftsmen and industrialists in the field of handloom, handicraft, leather industry, other cottage industries and silk centers would be ensured for overall development of rural industries in the rural areas.

 

 

Tourism: Project Opportunities in Jharkhand

 

PROFILE:

Tourism is one of the fastest growing industries in the world. The number of tourists worldwide has been registering phenomenal growth and it is expected that this number would shortly touch 1.5 billion. Tourism contributes about 11% of the world work force and 10.2% of the global gross domestic products. The dynamic growth of this industry is evident from the fact that a new job is added to this sector every 2.5 second. Jharkhand is endowed with rich cultural heritage and bestowed liberally with bounties of nature. Various initiatives are being taken by the Government and other organizations to promote tourism here. Jharkhand is blessed with an exotic landscape: the rolling hills, beautiful plateaus, sparkling rivers, etc. that largely contribute towards tourism at Jharkhand. Besides, the national parks, wildlife sanctuaries, holy shrines and museums, etc. largely attracts tourists to come to Jharkhand.

RESOURCES:

Blessed with immense biodiversity, moderate climate, rich cultural and historical heritage, Jharkhand is fast emerging as an ultimate tourist destination in eastern India. Jharkhand Tourism Department is taking utmost initiative to promote tourism in Jharkhand. A good number of hotels run by Jharkhand Tourism and private hoteliers have come up at popular tourist spots, which cater to all segments of travellers. Several Jharkhand Tourism Information Centers have been opened up in various parts of the city. These information centers provide details about Jharkhand travel, hotels, tourist attractions, travel agencies, licensed Jharkhand tourism guides and other important travel tips to holiday makers. Some of the major tourist spots in Jharkhand that play a vital role in the tourism industry of Jharkhand are: Netarhat, Betla National Park, Baidyanath Dham so on. It is noteworthy in this context that Kanke Dam, Ranchi Hill, Tagore Hill, Hatia Dam, Dasham Falls, Jagannath mandir, Jonah Falls, Hoondru waterfalls, etc. are the projects under the Tourism Industry of Jharkhand that heavily contributes towards the economy of the State.

GOVERNMENT POLICIES:

Jharkhand has huge potential in tourism sector. The tourism potential of the state has not been exploited and at the same time tourist spots have not been highlighted at national and international level. Jharkhand government seems to be serious to promote tourism in the state. The State Government would set up a Jharkhand Tourism Development Board to facilitate enter departmental co-operation and coordination to promote Tourism in the State. This Board would be set up under the chairmanship of the Chief Minister of Jharkhand with the Tourism Minister as Vice-chairman and Principal Secretaries/Secretaries of other relevant departments as members. The Board would also have representatives of the Hotel Association, Travel Agents Association, Adventure Sports Operators Association, NGO's and other non-official members having outstanding contribution or expertise in the field of development and promotion of tourism industries. Financial assistance as grants-in-aid, etc would be provided (to this board). The Board would advise the Government to lay down the policy guidelines for the development and promotion of tourism industry in the State, to promote public-private partnership and public sector would undertake all steps to develop and promote tourism in the State.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 273 of 337 | Total 3361 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 273 336 337   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Production of Steel containers (Cargo Containers). Best Profitable Manufacturing Business Idea in Shipping Industry.

Introduction There are three types of steel containers. Choose from new or used shipping containers, converted shipping containers, and purpose-built containers, such as flat packs. What you buy will be determined by what you want to store in it and where you intend to keep it. Steel storage containers are solid and stable, and they are cost-effective. You can expect several years of good service from the right container. They are the most durable of all steel storage containers, since they are designed to withstand wet weather and the weight of other containers stacked on top when being transported overseas. As a result, they are constructed of high-grade steel with a rust-resistant coating, thick floors, and heavy doors with rubber seals and solid locks. On construction sites, shipping containers make excellent storage containers for building materials, plant equipment, and tools. These containers are known as anti-vandal containers because they are difficult to break into or damage. They're also great for storing household furniture, but we suggest using a container that's newer or in excellent condition for this to protect any sensitive items from moisture damage. Related Project: Cargo Containers Steel Containers Types of Containers: Container units are the most important component of the entire shipping, commerce, and transportation industries. These shipping containers are structures that hold various types of goods that must be transported from one location to another using various types of container ships. Dry Storage Container: The most widely used shipping container is a dry storage container, which comes in a variety of ISO-standardized dimensions. They come in sizes of 20ft, 40ft, and 10ft and are used to transport dry materials. Flat Rack Container: These are simple storage shipping containers with collapsible sides that can be folded to create a flat rack for shipping a wide range of goods. Open Top Container: With a convertible top that can be removed entirely to create an open-top, materials of any height can be easily transported. Related books: Steel, Iron, Ferrous, Non-Ferrous Metals with Casting and Forging, Aluminium, Ferroalloys Technology Tunnel Container: Tank storage units with doors on both ends of the container are very useful for loading and unloading materials quickly. Open Side Storage Container: These storage units have doors that can be converted to fully open sides, allowing for even more space for material loading. Double Doors Container: They're a type of storage unit with two doors, allowing for more space for loading and unloading of materials. Steel, iron, and other construction materials are available in regular sizes of 20ft and 40ft. Refrigerated ISO Containers: These are temperature-controlled shipping containers that are held at a constant low temperature. They are only used to transport perishable goods such as fruits and vegetables over long distances. Insulated or Thermal Containers: These are shipping storage containers with a temperature control system that allows them to keep a constant temperature. The material selection is made in such a way that they can last a long time without being affected by prolonged exposure to high temperatures. They are well suited for long-distance product transportation. Related Videos: Steel and Steel Products, Iron and Steel, Ferrous Metals Products, Alloy Steel, Tinplate, Carbon Steel, Steel Mill, Forge Products, Mild Steels Projects Cargo Storage Roll Container: One of the specialised container units made for transporting sets or stacks of materials is a foldable container. They are made of dense, sturdy wire mesh and are equipped with rollers for easy movement. These shipping container units are made a bit more cheerful by the availability of a variety of coloured wire meshes. The Manufacturing Process Steel is the basic component of all shipping containers. It is the best option because it is extremely sturdy, malleable, resistant to corrosion, and simple to maintain. It's also a lot less heavy than iron. Steel goes through a number of steps before it can be used as a shipping container. Other materials include aluminium and fiber-reinforced polymers. Step 1: Cutting the Steel The production process begins with the unrolling of massive steel rolls. Cutting the roll into many pre-measured sheets with perfect precision is made possible by technologically advanced machinery that uses laser technology. To achieve the desired corrugated effect on the sheets, a metal stamping method is used. Step 2: The Cleaning Process: The steel sheet takes shape and size after the initial process. However, it must be prepared for the next stages of production. Sandblasting and priming are used to thoroughly clean the sheets. These procedures effectively remove any dirt and grime that has adhered to the metal sheets' surface. Step 3: Other components: When the sheets are being made, other critical components that make up the whole container will be manufactured at the same time. Wall and roof panels, floor braces, square tubing, corner frames and posts, and floor frames are among them. Related Projects: Steel and Steel Products, Iron and Steel, Ferrous Metals Products, Alloy Steel , Cold Rolling, Foundry , Hot rolling , Pelletizing , Rolling , Rolling Mill , Stainless Steel , Steel Mill , Tinplate, Carbon Steel, Forge Products, Mild Steels Projects Step 4: Assembling of all parts: The welding of wall panels, floor braces, and roof panels, among other things, is the first step in the construction process. The top of the wall is then welded to the square tubing, and the floor panels are put together to form the floor frame. The door assembly is then welded to the floor frame after this is completed. The corner assembly, corner posts, and wall panels are then mounted. A Jig is used throughout the assembly process to ensure straight and accurate fitting. Step 5: Fixing the door panel: Many of the joints are welded into place after the door frame is mounted. The door bar is attached to this robust framework, and the doors are secured to the floor frame. Finally, the container's wall and roof panels are welded together to complete the frame. India Set to Boost Containers Manufacturing: In the years leading up to the COVID saga, India's trade increased dramatically. The Hon'ble Prime Minister's ‘Atmanirbhar Bharat' or ‘Self-Reliant India' initiative resulted in an increase in manufacturing and development activities under the ‘Make In India' scheme, improving India's containerized exports. The country currently has about 1.5 million containers at its disposal, but this number falls well short of the new supply-demand gap. As a result, India stands at the crossroads of a golden opportunity to emerge as a major supplier of shipping containers for both itself and the rest of the world, in order to sustain its ambitious ambitions for a $5 trillion economy and to alleviate the ongoing container shortage. Related projects: - Project Reports & Profiles India has a large number of shipyards that, instead of sitting idle, could be used to produce containers. Indian steel companies are already preparing to take advantage of this opportunity to enter the market and begin production. Domestic involvement and government support will potentially lower the cost of obtaining containers from other countries, such as China, which produces around 90% of all shipping containers in the world. The Indian government was swift to recognize this gap and, with the aid of the Ministry of Ports, Shipping and Waterways, has already formed a committee to investigate the feasibility of manufacturing containers in Bhavnagar, Gujarat; a pilot project that has already begun. India's decision to improve container manufacturing, if scaled up well and in a planned manner, would not only minimise the shortage on major routes in and out of the country, but will also lower logistics costs within the country. Related Books: - BOOKS & DATABASES Market Outlook The global shipping container industry was worth $8.70 billion in 2019 and is expected to hit $12.08 billion by 2027, with a CAGR of 4.3 percent between 2020 and 2027. A shipping container is a sturdy container that can withstand transportation, storage, and handling. These containers vary in size from large reusable steel boxes for intermodal shipments to the popular corrugated boxes. Containers are a way of bundling freight and goods into large unitized loads that can be quickly handled, transported, and stacked in a ship or yard, similar to cardboard boxes and pallets. Aluminum and steel are the most common materials used. Each container's size and classification are in accordance with the International Organization for Standardization's standards and regulations (ISO). Container size, product type, end use, and area are all segments of the global shipping container industry. Market Research: - Market Research Report The shipping container industry is divided into three categories based on container size: small containers (20 feet), large containers (40 feet), and high cube containers (40 feet). Dry storage containers, flat rack containers, refrigerated containers, special purpose containers, and others are the different product types. Food and beverages, consumer goods, healthcare, manufacturing equipment, vehicle transportation, and others are the end-use categories. It is divided into four regions: North America, Europe, Asia-Pacific, and LAMEA. Few Major Indian Key Players: • DCM Hyundai Ltd. • J.K. Technologies Pvt. Ltd. • AB Sea Container Private Limited • Techno-cap Equipments India Pvt. Ltd. For More Details: https://www.entrepreneurindia.co/project-and-profile-details/Cargo%20Containers%20%20Steel%20Containers
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Start Investing in Plastic Business. Ideas and Opportunities in Production of PVC Edge Band Tape.

Introduction: Edge banding, also known as edge banding, is a finish carpentry process and a narrow strip of material used to produce sturdy and aesthetically pleasing trim edges. PVC, which is created by combining, calendaring, vacuum moulding, and other methods, is the key component of PVC edge banding strip. Furniture, office, kitchenware, teaching equipment, and civil engineering are only a few of the industries that use our products. Related Book: - Detailed Project Profiles on Hi-Tech Plastic Products Thicknesses range from 0.3 to 3mm, and widths range from 12 to 80mm. Smooth surface, no blistering, no stretch marks, mild glossiness, flat surface and back, uniform thickness, consistent width, fair hardness, high elasticity, good quality, solid wear resistance, edge banding side colour is similar to surface colour after trimming. Uses of PVC: Edge banding is a thin material that is used to seal plywood's exposed and raw edges. On one side, heat sensitive adhesive is applied to the board, while the other side serves as a dirt and moisture barrier. When using Pressure Laminated and Melamine Cabinets, PVC edge banding is the most common choice. With the popularity of modern European cabinetry on the rise, cabinets with glossy or colourful finishes are becoming more common. Edge banding made of PVC (polyvinyl chloride) is a thermoplastic resin that is both versatile and durable. Related Projects: - Plastics, Polymers and Resins, Polypropylene (PP), Polystyrene (PS), Acrylonitrile butadiene styrene (ABS), Polyethylene terephthalate (PET), Polyester, PA, Poly(vinyl chloride) (PVC), Polyurethanes (PU), Polycarbonate (PC), Polyethylene (PE)Projects PVC bands can be used on almost any form of wood, but the thickness of the band can vary. To ensure strength and longevity, it is critical to use the appropriate band for the material. Kitchen, bedroom, bathroom, and office furniture may all benefit from edge banding. Edging will help the consumer adjust the design and look of the grain in the wood when used in wood projects. Edge bands provide a variety of functions for your furniture. First, it acts as a de facto seal on the edge of the core material, keeping moisture out. Second, by offering impact resistance, edge banding increases longevity and resilience. If you use solid wood edging, it may also contribute to the overabundance. Production Process: PVC Edge Band Manufacturing Process Steps: • Material Mixing And Batching • Extrusion • Sculpture • Cooling • Vacuum Calibration • Printing • UV Defence • Infrared Dryer • Final PVC Edge Band Rolling/Cutting Related Videos: - plastic products Heat tolerance, oil resistance, high hardness, abrasion resistance, and excellent bendability are all characteristics of PVC edge banding. The surface can be printed with different patterns, such as natural wood or some other wonderful design, and the surface can also be laminated or hot stamped with different patterns. The recycled PVC edge banding is environmentally friendly. It's widely used in beds, cabinets, doors, and windows, as well as office furniture, shelves, and machinery. Market Outlook: The PVC Edge Banding industry is one of the markets that has attracted a lot of attention from investors. In the coming years, the global PVC edge banding market is expected to expand. Edge banding is also one of the most effective and dependable methods for covering the raw edge of wooden panels used in new furniture. Market Research: - Market Research Report Due to technological advances and R&D activities, a variety of edge banding products, such as polyvinyl chloride (PVC), wood, and resins, are now available on the market. The booming construction sector, particularly in developing regions such as Asia Pacific, particularly in India, is expected to provide significant opportunities for the current edge banding materials market landscape players. Key Players: 1. OSLO Edge Band Tape 2. Fitch Italy PVC Edge Band Tape Manufacturer 3. Plastics sheets laminate pvc bord edge band tape 4. ANANT Edge Band Tape 5. Decolux Pvc Laminate & Edge Band Tape 6. PEGASUS EDGE BAND TAPE For More Details: https://niir.org/profile-project-reports/profiles/rubber-plastic-industries-frp-products-polymers-pet-pvc-ldpe-hdpe-polypropylene-acrylic-polyutherthane-projects/z,,1c,0,a/index.html #DetailedProjectReport #businessconsultant #BusinessPlan #feasibilityReport #NPCS #entrepreneurindia #startupbusiness #ProjectReport #startup #projectconsultancy #businessopportunity #PVCEdgeBandTape #WoodenEdgebandTape #EdgebandTape #PlasticMarket #PlasticBusiness #PlasticProducts #PlasticProduction #PlasticManufacturing
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Profitable Business Opportunities in Production of Poly Tetra Fluoro Ethylene (PTFE).

Introduction: Polytetrafluoroethylene (PTFE) is a solid, tough, waxy, non-flammable synthetic resin made from tetrafluoroethylene polymerization. Teflon, Fluon, Hostaflon, and Polyflon are all trademarks for PTFE, which is known for its slippery surface, high melting point, and resistance to almost all chemicals. These properties have made it popular among consumers as a non-stick cookware coating; it is also used in industrial goods such as bearings, pipe liners, and valve and pump components. Related Projects: - Plastics, Polymers and Resins, Polypropylene (PP), Polystyrene (PS), Acrylonitrile butadiene styrene (ABS), Polyethylene terephthalate (PET), Polyester, PA, Poly(vinyl chloride) (PVC), Polyurethanes (PU), Polycarbonate (PC), Polyethylene (PE)Projects Polytetrafluoroethylene, or PTFE, is an ivory-white, opaque plastic fluoropolymer with a wide range of applications. It's made by the free-radical polymerization of several tetrafluoroethene molecules and can be used in a variety of industries, including aerospace, food and beverage, pharmaceuticals, and telecommunications. PTFE is an extremely flexible material with a wide range of uses, but it's perhaps best-known for its non-stick properties. It's hydrophobic, non-wetting, high density, and resistant to high temperatures. Uses of PTFE: In the aerospace industry, PTFE is commonly used in the manufacture of carbon fibre composites as well as fibreglass composites. When debulking (vacuum removal of air from between layers of laid-up plies of material) and curing the composite, PTFE film is used as a buffer between the carbon or fibreglass component being installed and the breather and bagging materials used to encapsulate the bondment. The PTFE film prevents non-production materials from adhering to the component being made, which is sticky due to the carbon-graphite or fibreglass plies being pre-pregnant with bismaleimide resin. In hose assemblies, expansion joints, and industrial pipe lines, PTFE is frequently used as the liner, particularly in applications involving acids, alkalis, or other chemicals. Related Books: - Plastics and Polymers, Polyester Fibers, Pet & Preform, Medical, Expanded Plastics, Polyurethane, Polyamide, Polyester Fibers, Additives Because of its frictionless properties, it can better flow highly viscous liquids and be used in applications including brake hoses. The non-stick properties of PTFE have also been used in the dental industry to keep fillings from sticking together. Since it is anti-corrosive and non-reactive, PTFE is often used to make containers and pipes. This is helpful in laboratories where highly corrosive materials must be stored in glass containers. PTFE also has a higher tensile strength due to its carbon-fluorine bonds. PTFE can also be used as a computer lubricant. PTFE decreases friction, energy consumption, and pollution when used in this way. Because of its strength and heat resistance, PTFE is also used to make gaskets. It's also used in plumbing as a thread seal tape. PTFE is also used to insulate cables and connector assemblies because of its good electrical insulation properties. It's suitable for hooking up wire, coaxial cable, and printed circuit boards because of this. Manufacturing Process: Granular, dispersion, and fine powder types of PTFE are available. Due to its high melting temperature and melt viscosity, semi-crystalline PTFE is difficult to extrude and injection mould. As a result, PTFE processing is more similar to powder processing than conventional plastics processing. A water-based suspension polymerisation reaction produces granular PTFE. Compression moulding is often used to form the granular resin that results. Related Videos: - Plastics Projects PTFE dispersion products are produced in the same way, but with the addition of dispersing agents. Dispersion materials can be used for PTFE coatings or film casting can be used to make a thin film. An emulsion polymerisation reaction produces PTFE powder. The fine powder that results can be paste extruded into PTFE tapes, tubing, and wire insulation, or used as a corrosion inhibitor in other polymeric materials. Since the high melting temperature of 327 °C (621 °F) is higher than the initial decomposition temperature of 200 °C (392 °F), processing PTFE can be difficult and costly. Because of its extremely high melt viscosity, PTFE does not flow even when molten. Tiny amounts of comonomers such as perfluoro (propylvinyl ether) and hexafluoropropylene can be used to reduce viscosity and melting point (HFP). The otherwise perfectly linear PTFE chain becomes branched as a result of these, reducing its crystallinity. Market Outlook By 2022, the global market for polytetrafluoroethylene is projected to produce more than US$ 7 billion in sales, with demand estimated to be 247 thousand MT. PTFE is a common fluoropolymer that accounts for a large portion of the global market. It's a solid, versatile, non-resilient material with excellent chemical and thermal properties. It's also a great insulator over a large frequency and temperature spectrum. Market Research: - Market Research Report The fastest-growing market for PTFE is projected to be electronics and electrical. Because of its outstanding electrical insulation properties under extreme conditions such as high temperatures and aggressive chemicals, PTFE has a wide range of applications in the electronics and electrical end-use industries. The global polytetrafluoroethylene market is booming, thanks to rising demand from a variety of industries, especially the electrical and automotive industries. Key Players: • 3M • DUNMORE Corporation • Guarniflon S.p.A. • Jiangsu Taifulong Technology Co. Ltd. • Jiangxi Aidmer Seal and Packing Co. Ltd. • Lenzing Plastics GmbH and Co. KG • Markel Corporation • Ningbo Taifno PTFE Plastic Products Corporation • Nitto Denko Corporation • Rogers Corporation • Saint-Gobain • Technetics Group For More Details: https://niir.org/profile-project-reports/profiles/plastics-polymers-resins-polypropylene-pp-polystyrene-ps-acrylonitrile-butadiene-styrene-abs-polyethylene-terephthalate-pet-polyester-pa-poly-vinyl-chloride-pvc-polyurethanes-pu-polycarbonate-pc-polyethylene-pe-projects/z,,38,0,a/index.html
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Hemodialysis Blood Tubing

The Chronic Kidney Disease (CKD) is increasing in alarming proportion all over the world. In India due to lack of financial resources, lack of trained manpower & infrastructure leads to severe strain on existing health policies in the light of the increasing burden of CKD. Kidneys are probably the only vital organs which can be realistically replaced by artificial means. Maintenance dialysis is a well-recognized modality of treating patients having end stage renal disease. Several thousands of patients all over the world are surviving and achieving reasonable quality of life on maintenance dialysis. In India the first Hemodialysis facility was established in 1961 2 at the CMC Vellore; soon it was started at 3-4 major centers during that decade viz. CMC Vellore, KEM Mumbai, PGI Chandigarh & All India Institute of Medical Sciences, New Delhi. Over the last three decades many more dialysis facilities have been established in Government sector, in Charitable Trust run institutions & by Private Nephrologist. There has been persistent improvement in the numbers & quality of dialysis delivered over this period. Blood Tubing Sets for Hemodialysis designed specifically to connect patient with an external system that extracts blood of the patient to the dialyzer and reverts patient’s blood from the dialyzer. Consists of 2 Parts: Arterial and Venous line which are used during dialysis with attached fistula and dialyzer. Unique chambers are there which reduce foaming, increase air removal and do not trap EPO (Erythropoietin). This helps in ensuring secure machine fit and less incidence of wet out. Sets feature many practical improvements over than other competitor brands, especially as to internationalization of the components. To guarantee much safer and easier to use, sets in many configurations and specifications to meet customers' needs and fit all types of dialyzers and dialysis machines. With strict control over each manufacturing step, from granules formulation to final sterility assurance, ensures that Sunder Sets are of the highest quality. A single hemodialysis session in India with a new dialyzer can cost between 1800 and 3400 (versus 500 dollars in the USA), while a reuse session would cost between 1600 to 2700. The cost of single-use hemodiafiltration would range between 3200 and 4500. If there are no-cost constraints, HDF is a preferred option to conventional HD and most big dialysis units in India are progressively increasing the numbers of HDF machines (Nipro/Fresenius). In Dialysis unit, we have a total of 18 HD machines (14 for negative patients, 3 for hepatitis C patients, and 1 machine for hepatitis B or HIV) and 2 HDF machines. We have budgeted two more HDF machines for the current financial year. Market Trend: As kidney transplant is still an elusive procedure in India, most patients are put on hemodialysis. The driving force for the ever-increasing demand of dialysis equipment is the exponential rate of growth of non-communicable diseases like diabetes , obesity, and hypertension; and the continuous increase in the geriatric population (most likely to suffer from ESRD). India dialysis market was valued at USD 3.1 billion in 2017. The global kidney dialysis equipment market is touted to accumulate USD 16.5 billion at a stupendous 5.7 percent CAGR (compound annual growth rate) during the assessment period (2018–2023). Hemodialysis segment accounted for over 90 percent revenue share in 2017 and is projected to grow over the forthcoming years. In the center, dialysis accounted for more than 70 percent share in 2017. Market challenges: Consistent innovation in the dialysis equipment market is leading to the creation of complex systems that patients and clinicians are having trouble getting accustomed to. The greatest challenge is the lack of instructive training and ease of accessibility of the equipment. Currently, some players in the Indian dialysis equipment market include Fresenius, B Braun, Baxter-Gambro, and Nipro. At present, business in the Indian dialysis market is valued as USD 50.0 billion and is expected to grow further. One of the latest developments in the market is the proposed launch of a portable dialysis system by Medtronic. Such a machine will be easily transportable in rural India and will require less water, less treatment, and less technician expertise. As a whole there is a good scope for new entrepreneur to invest in this business. Few Major Players • Angi Plast Pvt. Ltd. • Fresenius Kabi India Pvt. Ltd. • Global Minetec Ltd. • Hemant Surgical Inds. Ltd. • Nipro Tube Glass Pvt. Ltd.
Plant capacity: 4000 Pcs Per DayPlant & machinery: 133 Lakhs
Working capital: -T.C.I: Cost of Project:404 Lakhs
Return: 25.00%Break even: 55.00%
Add to Inquiry Add to Inquiry Basket

Ayurvedic Pain Balm

Mother Nature is full of various plants popularly known as herbs. These harbors have various properties that very efficiently provide cure to various diseases like muscle pain, headache, back pain, joint pain, etc. These herbs are extracted in the form of oil in order to provide fast relief from pain. The herbal pain relief oil is manufactured using roots, stems, leaves of various species of plants. A balm is a concentrated, waterless moisturizer that delivers the oil directly to the skin. And because there is no water, there is no need for emulsifiers. Oils blend and beeswax thickens it up. The absence of water also means that balms do not require much preservative, because bacteria cannot grow without water. They are preserved with either essential oils and/or vitamin E. Balm is touted as a multipurpose product that may be used for a wide range of issues, especially pain. Here are some potential uses: • Toenail fungus: The active ingredient camphor may treat this type of fungal infection. However, this study was done using Vicks VapoRub, not Balm. • Back pain: The active ingredients camphor and menthol may help soothe this type of pain. • Common colds: Menthol may alleviate cold symptoms. • Congestion: A combination of menthol and eucalyptus may clear up congestion. • Flu-related symptoms: Menthol and eucalyptus may help aches associated with the flu. • Headaches: Menthol may provide relief. The addition of eucalyptus can also have pain-relieving effects. • Non-arthritic joint pain: Menthol and camphor may help treat this type of pain when it’s related to exercise and other activities. • Minor burns: Camphor and menthol may cool and soothe them. • Mosquito bites: Menthol may treat Trusted Source and repel these bug bites (but using a physical repellant, like bed nets, alongside menthol is best). • Neuropathy: Capsicum may alleviate neuropathic symptoms. Balm is used for local application for reducing pain and stiffness occurring due to various diseases. • Headache: Balm is a highly effective product that helps to obtain quick relief from a headache. It produces a soothing effect on the affected area and reduces the pain. The cooling action produced by ingredients present in this product helps to enhance its beneficial effect in reducing pain. • Common Cold: The common cold is an acute condition that causes a headache, running nose, congestion in the nose, and sneezing. Applying balm over the nose and the forehead can provide instant relief from these symptoms. The common cold is caused by a viral infection. The symptoms caused by this condition last for about 3 to 4 days after which they resolve spontaneously. • Neck pain: Cervical spondylosis is a common cause of pain in the neck. It also affects the movements of the neck and leads to the stiffness of the muscles in this region. Application of balm can provide relief from these symptoms. It produces a soothing effect in the affected area and reduces the discomfort. • Back pain: Balm can be used to get rid of back pain caused by sprain and lumbar spondylosis. It produces a soothing effect in the affected area and helps the patient move about freely without much discomfort. • Arthritis: Balm is useful in the treatment of joint diseases like arthritis. It can also be used for obtaining relief from the stiffness and pain in the small joints caused due to rheumatoid arthritis. The herbs present in this medicine produce a local anti-inflammatory action. This helps to reduce swelling and pain in the joints. • Shoulder pain: Pain and stiffness in the shoulders may occur due to the tear or minor injury in the ligaments or muscles in the region. Applying balm over the affected area can help to get rid of these symptoms. It produces a soothing effect and reduces pain and stiffness. • Muscle pain: Overexertion is a common cause of pain in the muscles. balm can be highly effective in providing relief from muscle pains. It reduces the pain and discomfort in a short duration of time. It also produces a soothing feeling over the affected part. • Strains and sprains: Balm can be used to get rid of the pain caused by strains and sprains. These are acute conditions often caused due to a sudden fall, twisting of the part of a body or a missed step. This may lead to a tear or injury to the ligament. The common parts of the body prone to strains and sprains are the ankles, neck, and the back. Ayurveda is an alternative medicine system with historical roots in India. The Indian wellness and ayurveda industries go hand in hand. Ayurveda is globally acclaimed for its preventive healthcare properties and treatment of many chronic lifestyle disorders. The Indian ayurveda industry has several large players, with the micro, small and medium enterprises (MSMEs) capturing 80% market share. Ayurveda is witnessing a resurgence in India because people have accepted this as a way of life as opposed to the earlier notion of ayurveda as an alternative area of medicine. The government set up the Ministry of AYUSH (Ayurveda, Yoga, Unani, Siddha and Homoeopathy) in November 2014 to promote the country's indigenous alternative medicines including education and research. Thus, due to demand it is best to invest in this project. Few Indian Major Players • Amrutanjan Health Care Ltd. • Arya Vaidya Pharmacy (Coimbatore) Ltd. • Ayurvedic Pharmaceutical Co. Ltd. • Ayusri Health Products Ltd. • Emami Ltd. • Heal Ayurveda Pharmacy Ltd. • Himalaya Drug Co. Pvt. Ltd.
Plant capacity: 13333 Bottles Per DayPlant & machinery: 15 Lakhs
Working capital: -T.C.I: Cost of Project:293 Lakhs
Return: 32.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

Chocolate Confectionery Plant (Milk Chocolate, Dark Chocolate, White Chocolate, Orange & Tangy Flavour Toffee, Citric Flavoured Candies & Chocolate Wafers)

Chocolate is a product that requires complex procedures to produce. The process involves harvesting coca, refining coca to cocoa beans, and shipping the cocoa beans to the manufacturing factory for cleaning, coaching and grinding. These cocoa beans will then be imported or exported to other countries and be transformed into different type of chocolate products. The chocolate and confectionery products industry has traditionally been subject to significant fluctuations in demand. Chocolate products tend to be seasonal in nature, with demand increasing sharply during the holidays. Consumers of all age groups prefer chocolate and confectionery products because of their attractive appearance and colour. In addition, several consumer trends have had an impact on demand. Now-a-days varieties of products have gained importance due to their delicious taste and better keeping quality. Chocolate, candy and gum are some of people’s best-loved treats. These sweets have been enjoyed around the world for thousands of years. Early man developed a taste for sweets by digging honey from beehives. Recorded history traces several types of actual candy to the Egyptians 3,500 years ago. Boiled candies were popularized in 17th century Europe. By the mid-1800s, more than 380 American factories were producing candy. Confectionery, gummies/jellies, hard candy, toffee and fudge. The main reasons for purchasing are convenience, passive health, age, choice and pleasure. The most popular flavour groups are brown flavours, fruit, nuts, mints & menthols and dairy flavours. The top 5 companies supplying confectionary are Cadbury, Nestle, Kraft, Lindt and Mars. Flavanols are the main flavonoids found in cocoa and chocolate. Research over the past decade has identified flavonoids as showing diverse beneficial physiological and antioxidant effects. Flavonoids are compounds also found in fruits, vegetables, and certain beverages such as tea, red wine, and grape juice. Chocolate is not high in cholesterol. Cocoa and its components (cocoa solids and cocoa butter) are not recognized as a source of Trans fat in the diet. Confectionary products include a wide variety of food items, like – milk chocolate, white chocolate, citric flavor candies, orange flavor candies, tangy flavor candies, hard sweets, fudge, toffee, milk tablet, liquorices, jelly candies, marshmallow peeps, marzipan sweets, divinity, chewing gum, etc. The preparation and manufacture of chocolate and confectionary products require hoards of raw materials. These include - basic food colours, blended food colours, lake colours, natural food colours, food chemicals, spray dried coated powder flavour, soft drink concentrates, baking powder, icing sugar, coco powder and natural gums. Chocolates are the favourite item of children. Its primary feature is that it is solid at room temperature of 20 - 25 deg. C and yet melts rapidly in the mouth at 37 deg. C giving a liquid, which appears smooth to the tongue. The toffee and candy are used after meal, dinners as smooth refresher. It drives away bad smell from mouth and refreshes the breath. Sometimes it causes good sensation while chewing. Chocolate wafer are usually enjoyed as a snack. The chocolate wafers product is more nutrient due to the addition of the flavor layers and the dried fruits, the multi-flavor chocolate wafer biscuit is more beneficial to intake of nutrition and calories for people. The chocolates market in India is estimated at around 45,000 tonnes valued at approximately Rs 15.0 bn. The counter market is estimated at about Rs 5 to 7 bn and the rest is made up of chocolate bars. Chocolates make up less than a fourth of the sweet-tooth products including sugar-boiled confectionery, mints and chewing gums. Sugar confectionery is by far the largest segment. To push sales, chocolate majors have been targeting adult clientele. Chocolates are being presented as snack food for the new target audiences. Another strategy sought was the introduction of smaller editions. Growing at a compounded annual growth rate (CAGR) of about 25% Indian chocolate industry’s size is presently worth about 50 bn and is likely to cross Rs. 75 bn mark in the next couple of years while globally the chocolate industry is worth over USD 85 bn. Besides, India’s per capita chocolate consumption is having at about 100 gm & urban centres comprise 35% of the chocolate consumption in the country. Cocoa, specifically, the market size (volume) of cocoa was 3,455,622 metric tonnes in 2013 and is estimated to grow at a compounded annual growth rate (CAGR) of 3.1 % from 2014 to 2019. As for the chocolate market, it is projected to grow at a CAGR of 2.3% from 2014 to 2019. By 2019, the world cocoa market is expected be worth about USD 2.1 bn, and the world chocolate market is expected to be worth about USD 131.7 bn. India chocolate market projected to grow at a CAGR of over 16% to reach $ 3.3 billion by 2023 with the country currently representing one of the world’s fastest growing markets for chocolates. Entrepreneurs who invest in this project will be successful. Few Indian Major Players • Gandour India Food Processing Pvt. Ltd. • Inbisco India Pvt. Ltd. • Joyco India Pvt. Ltd. • Lotte India Corpn. Ltd • Mondelez India Foods Pvt. Ltd. • Perfetti Van Melle India Pvt. Ltd.
Plant capacity: Milk Chocolate:1,600 Kgs Per Day Dark Chocolate:1,600 Kgs Per Day White Chocolate:1,600 Kgs Per Day Oragne & Tangy Flavour Toffee:1,200 Kgs Per Day Citric Flavoured Candies:1,200 Kgs Per Day Chocolate Wafers:1,600Kgs Per DayPlant & machinery: 249 Lakhs
Working capital: -T.C.I: Cost of Project:671 Lakhs
Return: 29.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Solar Panel

Solar panel refers either to a photovoltaic module, a solar thermal energy panel, or to a set of solar photovoltaic (PV) modules electrically connected and mounted on a supporting structure. A PV module is a packaged, connected assembly of solar cells. Solar panels can be used as a component of a larger photovoltaic system to generate and supply electricity in commercial and residential applications. Each module is rated by its DC output power under standard test conditions (STC), and typically ranges from 100 to 320 watts. The efficiency of a module determines the area of a module given the same rated output - an 8% efficient 230 watt module will have twice the area of a 16% efficient 230 watt module. The technology behind solar is relatively old, despite their futuristic appeal, but while the basics are the same the efficiency of solar panels has improved greatly in recent years. It’s worth noting that solar panel suppliers often have two types of solar panels on offer: thermal panels and photovoltaic (PV) panels. The former are used only to heat water. The electricity produced by solar panels will be used to power any appliances currently in use within home. Any electricity which is not used will be sent to the grid. India has abundant solar resources, as it receives about 3000 hours of sunshine every year, equivalent to over 5,000 trillion kWh. India can easily utilize the solar energy. Today the Government is encouraging generation of electricity from various renewable energy sources such as wind, solar, small hydro, biomass by giving various fiscal & financial incentives. This apart, the state governments are procuring electricity from renewable energy projects at preferential tariff. Multiple solar cells in an integrated group, all oriented in one plane, constitute a solar photovoltaic panel or solar photovoltaic module. Photovoltaic modules often have a sheet of glass on the sun-facing side, allowing light to pass while protecting the semiconductor wafers. Solar cells are usually connected in series in modules, creating an additive voltage. Connecting cells in parallel yields a higher current; however, problems such as shadow effects can shut down the weaker (less illuminated) parallel string (a number of series connected cells) causing substantial power loss and possible damage because of the reverse bias applied to the shadowed cells by their illuminated partners. Solar panels can be used to generate a portion of home’s power in order to reduce dependency on traditional power sources. For instance, install panels to provide electricity just for appliances or lighting, to reduce dependency on the utility company, as well as lower bill. Solar modules use light energy (photons) from the sun to generate electricity through the photovoltaic effect. The majority of modules use wafer-based crystalline silicon cells or thin-film cells based on cadmium telluride or silicon. The structural (load carrying) member of a module can either be the top layer or the back layer. Cells must also be protected from mechanical damage and moisture. The solar contribution stood at 5.44% as of 2018. Major factors driving the market studied are the declining cost of the solar module and the government policies like allowing 100% FDI under automatic route for renewable power generation and distribution projects which is expected to increase the participation from global players into the Indian market. With government promoting the solar installation in rural area by providing subsidized solar panels and other incentive, the solar PV installation is ought to increase during the forecast period and is expected to drive the market. So far, only five CSP projects, namely, ACME solar tower (2.5 MW), Dhursar (125 MW), Godawari solar project (50 MW), Megha solar plant (50 MW), and national solar thermal power facility (1 MW) have started operations in India. Owing to factors, such as, huge capital expenditure, difficulty in securing land and water, and insufficient DNI data, other projects have been delayed. India solar power products market is projected to grow at a CAGR of more than 11% to surpass $ 7.6 billion by 2024 on the back of increasingly stringent policy and regulatory framework and rising environmental concerns. The Ministry of New and Renewable Energy has set a target of 100 GW of solar power generation capacity by 2022. To achieve the target, government has taken several initiatives in the form of offering subsidies, financial assistance, and incentives to manufacturers, power producers and even customers. The global solar panel market volume reached 155.5 GW in 2019. A solar panel, also known as a PV panel, is a collection of solar (or photovoltaic) cells that employ natural sunlight to generate electricity. It is made of several solar cells, manufactured using silicon, boron, and phosphorus, which are arranged in a grid-like pattern on the surface. The utilization of solar panels has increased across the globe as they do not lead to any form of pollution and their installation helps in combating the harmful emissions of greenhouse gases. Also, innovations in quantum physics and nanotechnology are projected to increase their effectiveness potentially. They are superior to conventional solar panels in terms of efficiency and cost-effectiveness. They can also be integrated into almost any surface, which will further boost their applicability across various sectors. On account of these factors, the market to sustain positive growth over the forecast period (2020-2025). As a whole there is a good scope for new entrepreneur to invest in this business. Few Indian Major Players • Dhursar Solar Power Pvt. Ltd. • Divine Solren Pvt. Ltd. • Ind Renewable Energy Ltd. • Indira Power Pvt. Ltd. • Janardan Wind Energy Pvt. Ltd. • Kiran Solar One Pvt. Ltd. • Laxmi Agroenergy Pvt. Ltd.
Plant capacity: 33 KW per dayPlant & machinery: 181 Lakhs
Working capital: -T.C.I: Cost of Project:668 Lakhs
Return: 28.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Dextrose Saline

Normal saline (NS or N/S) is the commonly used phrase for a solution of 0.90% w/v of NaCl, about 300 mOsm/L or 9.0 g per liter. Aless commonly, this solution is referred to as physiological saline or isotonic saline, neither of which is technically accurate. NS is used frequently in intravenous drips (IVs) for patients who cannot take fluids orally and have developed or are in danger of developing dehydration or hypovolemia. For medical purposes, saline is often used to flush wounds and skin abrasions. Normal saline will not burn or sting when applied. Saline is also used in I.V. therapy, intraveno supplying extra water to rehydrate patients or supplying the daily water and salt needs ("maintenance" needs) of a patient who is unable to take them by mouth. Dextrose (D-glucose, corn sugar, starch sugar, blood sugar and grape sugar) is by far the most abundant sugar in nature and occurs either in the Free State (monosaccharide form) or chemically linked with other sugar varieties. In the Free State, it occurs in substantial quantities in honey, fruits, and berries. As a polymer of anhydrodextrose units, it occurs in starch, cellulose, and glycogen. Sucrose is a disaccharide of dextrose and fructose. Commercial production of dextrose by hydrolysis of starch yields white crystalline sugars that are either anhydrous (C6H12O6) or hydrated (C6H12O6H2O). Dextrose hydrate with its one molecule of water of crystallization per molecule of sugar, separates from concentrated solutions at <50°C. Anhydrous D-glucose does not contain water of crystallization and separates at 50-115°C. Another anhydrous form, B-D-glucose separates, if crystallization is carried out at temperatures >110-115°C. • Dextrose solution is used during post-operative period when sodium extraction is reduced. • Dextrose solution with concentration of 10-15% is used as di-urietic for increase in urine flow. • Dextrose solution of 5% normal salmicis used for restarting fluid volume in circulation of an emergency as in accidents with raemdrrhage. • Saline solution is used when large amount of sodium has been lost by vomiting or by gastric or intestinal duodenal aspiration or through analimucationfistuala. • Dextrose monohydrate is used as supplement to cow's milk in part of feeding. The increasing prevalence of chronic diseases is expected to drive the growth of the market. It has been forecasted that cancer will rapidly increase by approximately 70% in the next few decades. As per the World Cancer Research Fund International, stomach cancer is one of the top 5 cancers with 952,000 new cases diagnosed in 2012. These patients are ‘nil by mouth’ and have to rely on total parenteral nutrition (TPN) for survival. Intravenous (IV) solutions are fluids which are intended to be administered to a patient directly into the venous circulation. These fluids are sterile fluids which protects patients at the time of serious dehydration. There are various type of IV solutions available for use in the market. Many companies manufactures packaged intravenous fluids or products or compounds which can be mixed with sterile water to prepare a solution for intravenous administration. The market for Intravenous (IV) Solution is expected to reach USD 11,511.2 million by 2022 and is expected to grow at a CAGR of 7.69% during the forecast period 2016-2022. The factors which drive the growth of the market are the rising prevalence of chronic diseases, rising acceptance of vitamin C intravenous treatment therapy to treat colorectal cancer. Thus, due to demand it is best to invest in this project. Few Indian Major Players • Pfizer Healthcare India Pvt. Ltd. • Pfizer Ltd. • Pharmacia Healthcare Ltd. • Shree Krishna Keshav Laboratories Ltd. • Vikrant Pharmaceuticals Ltd. • Wockhardt Health Care Ltd.
Plant capacity: Dextrose Saline 500 ml Size:15,000 Bottles Per Day Dextrose Saline 1000 ml Size:15,000 Bottles Per DayPlant & machinery: 1148 Lakhs
Working capital: -T.C.I: Cost of Project:1542 Lakhs
Return: 25.00%Break even: 44.00%
Add to Inquiry Add to Inquiry Basket

Carbon Black

Carbon black is virtually pure elemental carbon in the form of colloidal particles that are produced by incomplete combustion or thermal decomposition of gaseous or liquid hydrocarbons under controlled conditions. Its physical appearance is that of a black, finely divided pellet or powder. Its use in tyres, rubber and plastic products, printing inks and coatings is related to properties of specific surface area, particle size and structure, conductivity and color. Carbon black is also in the top 50 industrial chemicals manufactured worldwide, based on annual tonnage. Current worldwide production is about 8.1 million metric tons. Approximately 90% of carbon black is used in rubber applications, 9% as a pigment, and the remaining 1% as an essential ingredient in hundreds of diverse applications. Carbon black is added to polypropylene because it absorbs ultraviolet radiation, which otherwise causes the material to degrade. Carbon black particles are also employed in some radar absorbent materials, in photocopier and laser printer toner, and in other inks and paints. The high tinting strength and stability of carbon black has also provided use in coloring of resins and films. Carbon black has been used in various applications for electronics. A good conductor of electricity, carbon black is used as a filler mixed in plastics, elastomer, films, adhesives, and paints. It is used as an antistatic additive agent in automobile fuel caps and pipes. The highest volume use of carbon black is as a reinforcing filler in rubber products, especially tyres. While a pure gum vulcanization of styrene-butadiene has a tensile strength of no more than 2 MPa and negligible abrasion resistance, compounding it with 50% carbon black by weight improves its tensile strength and wear resistance as shown in the table below. It is used often in the aerospace industry in elastomers for aircraft vibration control components such as engine mounts. Practically all rubber products where tensile and abrasion wear properties are important use carbon black, so they are black in color. Where physical properties are important but colors other than black are desired, such as white tennis shoes, precipitated or fumed silica has been substituted for carbon black. Silica-based fillers are also gaining market share in automotive tyres because they provide better trade-off for fuel efficiency and wet handling due to a lower rolling loss. Types of Carbon Black • Hard Blacks (synonyms: tread grades, reinforcing Carbon Black): a type of furnace Carbon Black having an average nitrogen surface area of 70 m²/g or greater. • Soft Blacks (synonyms: carcass grades, semi-reinforcing Carbon Black): a type of furnace Carbon Black having a nitrogen surface area in the range of 21 to 69 m²/g. Total production was around 8,100,000 metric tons (8,900,000 short tons) in 2006. Global consumption of carbon black, estimated at 13.2 million metric tons, valued at US$13.7 billion, in 2015, is expected to reach 13.9 million metric tons, valued at US$14.4 billion in 2016. Global consumption is forecast to maintain a CAGR (compound annual growth rate) of 5.6% between 2016 and 2022, reaching 19.2 million metric tons, valued at US$20.4 billion, by 2022. The most common use (70%) of carbon black is as a pigment and reinforcing phase in automobile tyres. Carbon black also helps conduct heat away from the tread and belt area of the tyre, reducing thermal damage and increasing tyre life. About 20% of world production goes into belts, hoses, and other non-tyre rubber goods. The balance is mainly used as a pigment in inks, coatings and plastics. Entrepreneurs who invest in this project will be successful.
Plant capacity: 167 MT per dayPlant & machinery: 2563 Lakhs
Working capital: -T.C.I: Cost of Project:8249 Lakhs
Return: 49.00%Break even: 25.00%
Add to Inquiry Add to Inquiry Basket

Aluminium Easy Open End (EOE)

The term “easy open end” is used generally for that class of ends for containers that are provided with a built-in mechanism for permitting the consumer to open the container at the end for access to the ingredients within the container, without requiring the use of a can opener or other external tool. One conventional easy open end employs a pull tab having a pointed nose, the pull tab being riveted to the panel of the end so that the nose rests adjacent a weakened area along the periphery of the end panel. To open, the pull tab is rotated about the rivet, causing the nose to fracture the weakened area. Further pulling of the tab away from the end panel then causes the remainder of the weakened peripheral to rupture, thereby permitting the entire end to be opened. One type of easy-open end that is in wide use is the so called “full-open” end, in which a peripheral score, generally circular in configuration, is formed in the end panel at or adjacent to the periphery thereof to permit its complete removal. Full-open type cans are to be distinguished from those self-opening cans which have a comparatively small removable section which, when opened, provide a comparatively small hole for dispensing the product. Sealing with PET Can, Aluminium can, Tinplate can, Metal can, Paper can, Composite can, Food can, Plastic can, etc. • Non-processed foods such as snacks, nuts, powdered beverage, coffee and tea, infant formula, soup and sauce mixes, noodle/rice mixes, spices, pet food and treats; non-food products. • Applications also include processed foods such as: pet food, fish and seafood, spreads and other food products. Aluminium is used as a substrate, generally with an organic coating on both sides. This is necessary to facilitate the forming of the metal and/or to protect the metal against corrosion during the shelf life of the can or can end. It is often externally printed. Aluminium substrates are alloys. There are two major families of alloys depending on the main alloying element: magnesium or manganese. The rolling process is driven to obtain the required mechanical properties. It is for instance possible to obtain harder metal and thereby allowing reduced thickness. There has been a dynamic shift in the consumer consumption pattern in the food & beverage sector. Consumer inclination towards ready to eat food is increasing owing to changing lifestyles and growing disposable incomes, especially in the emerging economies across the globe has witnessed an increase in the sales of the global aluminium containers market. Foodservice operators & online food service outlets offers various services such as ‘takeaway’ and ‘drive through’ to cater the growing number of on the go consumers has resulted in the increase in the sales of the aluminium containers. Increase in usage of aluminium containers for packaging in food service industry, in turn, is expected to drive the demand for aluminium containers market during the forecast period. One of the key factors that increase the preference towards the aluminium containers for packaging is extended shelf life of products. Aluminium containers score very high in barrier properties. This factor is expected to fuel the growth of the global aluminium containers market. As a whole there is a good scope for new entrepreneur to invest in this business.
Plant capacity: Aluminium Easy Open End, 63 mm Size:2,016,000 Units Per Day Aluminium Scrap:200Kg Per Day Plant & machinery: 5338 Lakhs
Working capital: -T.C.I: Cost of Project:8483 Lakhs
Return: 29.00%Break even: 35.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 273 of 337 | Total 3361 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 273 336 337   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top