What is a sodium hydrosulphite project report?
A sodium hydrosulphite project report is a detailed project report (DPR) for a plant that makes sodium dithionite powder, the reducing agent used in vat and indigo dyeing. It covers the process route, machinery, raw materials, safety approvals, project cost, means of finance, five-year projections, DSCR and break-even that a lender checks.
Promoters and chemical companies use it to choose a route and capacity and to raise a term loan; banks use it to judge whether the plant can repay.
Also known as: sodium hydrosulfite project report, sodium dithionite plant report, hydros manufacturing project report, project report on sodium hydrosulphite, sodium hydrosulphite business plan.
Sodium hydrosulphite manufacturing plant cost in India
Our sample report models a 9.7 MT per day plant on the sodium formate route, working 330 days a year. It starts at 60% of capacity and reaches 80% in Year 5, with a selling price of ₹1,12,000 per MT before GST.
| Land and site development | 139.66 |
|---|---|
| Building and civil works | 333.83 |
| Plant and machinery | 708.93 |
| Other fixed assets | 90.88 |
| Contingencies | 52.14 |
| Preliminary and pre-operative | 33.14 |
| Working capital margin | 81.79 |
| Total | 1,440.37 |
| Promoter's contribution (25%) | 360.09 |
|---|---|
| Term loan from bank (75%) | 1,080.28 |
| Cash credit limit (separate) | 245.38 |
| Total project cost | 1,440.37 |
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments; the lowest DSCR is 1.67 in Year 2. All figures are illustrative.
Sodium hydrosulphite manufacturing process (sodium formate route)
In the formate route, sodium formate, caustic soda and sulphur dioxide react in a methanol and water mixture. Sodium dithionite is not very soluble in that mixture, so it crystallises as it forms and is filtered out.
- Solution preparation
Sodium formate is dissolved in water, and sulphur dioxide is absorbed in recycled methanol in a separate tank.
- Reaction
The formate solution, caustic soda lye and SO2 in methanol are fed into a closed pressure reactor, where the crystals form and carbon dioxide is released.
- Filtration and washing
The slurry goes to a pressure nutsche filter, and the crystals are washed with fresh methanol to strip off mother liquor.
- Vacuum drying
Wet crystals are dried under vacuum at low temperature, because the product breaks down quickly in heat and moisture.
- Methanol recovery
Mother liquor and wash methanol are distilled and the methanol goes back to step 1; recovery efficiency sets your make-up cost.
- Off-gas scrubbing
Carbon dioxide vented from the reactor passes through a caustic scrubber that captures any sulphur dioxide.
- Stabilising and packing
The dry powder is blended with a little soda ash and packed in airtight drums with a polyethylene liner.
Sodium formate or zinc dust: which route to choose?
Two routes are used. The choice changes your raw materials, effluent, product purity and approvals, so settle it before you size the plant.
| Sodium formate route | Formate, caustic soda and SO2 react in aqueous methanol. Needs pressure reactors and a methanol recovery column, but gives low-zinc powder and no metal sludge. Modelled in our sample report. |
|---|---|
| Zinc dust route | Zinc dust slurry reacts with SO2 to form zinc dithionite, which is converted to the sodium salt with caustic soda or soda ash. Zinc then has to be removed from the solution and the sludge recovered or disposed of. |
| Purity limits that decide it | IS 1919:2024 sets zinc at no more than 20 mg/kg and sodium formate at no more than 0.6% for both grades. Zinc-route plants need good zinc removal; formate-route plants need good washing. |
| Grades you can sell | Grade 1 (at least 88% Na2S2O4) for the dyestuff industry; Grade 2 (at least 84%) for textiles, jaggery and other bleaching uses. |
What lenders look at: a zinc-route proposal has to show how zinc sludge is recovered or disposed of. Without that, consent to establish and appraisal both slow down.
Raw materials for sodium hydrosulphite
Sulphur dioxide and sodium formate together are about two-thirds of raw material cost in our sample. Raw materials take 48.4% of sales, so a rise in SO2 or formate prices moves profit faster than any other cost.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Liquid sulphur dioxide | 34% | 413.32 |
| Sodium formate | 32% | 389.00 |
| Caustic soda lye | 22% | 267.44 |
| Methanol make-up | 9% | 109.41 |
| Soda ash stabiliser | 3% | 36.47 |
| Total | 100% | 1,215.64 |
Some plants burn sulphur on site to make SO2 instead of buying it liquid; the report should cost the option you will actually run.
Machinery for a sodium hydrosulphite plant
The pressure reactors are the largest single item, followed by the methanol recovery column. Wetted parts are stainless steel because the reaction mix is acidic and corrosive.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| SS pressure reactors with agitators | Run the formate reaction | 184.32 |
| Methanol recovery distillation column | Recovers solvent for reuse | 106.34 |
| Pressure nutsche filters | Separate and wash crystals | 99.25 |
| Rotary vacuum dryer | Dries crystals at low temperature | 92.16 |
| SO2 vaporiser and methanol absorption system | Prepares the SO2 feed | 70.89 |
| Chiller, cooling tower and boiler | Control reaction heat and supply steam | 63.80 |
| Caustic scrubber and effluent treatment plant | Capture SO2 and treat effluent | 49.63 |
| Blender and drum filling station | Stabilise and pack powder | 42.54 |
| Total plant and machinery | 708.93 | |
Costs are the sample report's estimates for a 9.7 MT per day plant. Get current quotations before you finalise.
Utilities and manpower for the plant
A formate plant runs continuously, with reactors, filters and the dryer working in shifts. Steam, chilling and vacuum are as important as power, because they decide methanol loss and product strength.
| Power and fuel | ₹186.06 lakh in Year 3 of our sample, 7.4% of sales, for agitators, vacuum pumps, the chiller and boiler fuel |
|---|---|
| Steam | Needed mainly for the methanol recovery column and the vacuum dryer jacket |
| Chilled and cooling water | Removes reaction heat and condenses methanol; poor cooling raises solvent loss |
| Manpower | 53 people in our sample at a Year 1 cost of ₹120.06 lakh, with round-the-clock shift operators |
| Packing | 4.5% of sales in our sample, for lined, airtight drums |
Licences and safety approvals for a sodium hydrosulphite plant
Beyond Udyam, GST, the factory licence and fire NOC, these approvals are specific to this product.
| Pollution board consent | Consent to establish and operate from the State Pollution Control Board. Basic chemicals are on the Red category list, so expect Red treatment; the board confirms the category for your unit. |
|---|---|
| SO2 storage | A PESO licence under the SMPV(U) Rules, 2016 if liquid SO2 is held in a pressure vessel of more than 1,000 litres water capacity (form LS-1A for toxic gases) |
| Hazardous chemical rules | Sulphur dioxide is in Schedule 2 of the MSIHC Rules, 1989; storage of 20 tonnes or more brings notification and safety-report duties |
| Product standard | IS 1919:2024 for sodium hydrosulphite. It is a voluntary standard and is not on the chemicals Quality Control Order list as of October 2026. |
| Packing and labelling | Airtight lined drums marked with grade, batch, date of packing and the caution "Flammable! Keep in cool and dry place", as IS 1919:2024 requires |
Who buys sodium hydrosulphite in India?
Textile wet processing is the largest user. Denim mills use it to reduce indigo, and process houses use it for vat dyeing and to clear polyester after dyeing. Demand therefore follows the textile clusters of Gujarat, Maharashtra, Tamil Nadu and Punjab, and it dips when mills cut shifts.
- Denim mills and textile process houses
- Dyestuff and dye intermediate makers
- Paper and pulp mills brightening mechanical and recycled pulp
- Kaolin and china clay processors
- Chemical traders supplying textile clusters
Paper, clay and dyestuff buyers order through the year, which helps balance the textile cycle.
Where a new plant wins: buyers test assay on arrival, and the powder loses strength when damp. A plant that dispatches quickly to nearby mills in sound drums can beat cheaper material that has sat in transit.
Mistakes that weaken a sodium hydrosulphite project report
- Using sodium hydrosulfide data
Hydrosulfide (NaHS) is a different chemical with different prices and plant. Mixing them up makes the whole report unreliable.
- Pricing every tonne at top grade
Selling price follows assay. If part of your output sells as 84% Grade 2, revenue and DSCR fall.
- Under-costing methanol loss
Make-up methanol is 9% of raw material cost in our sample. A weak recovery column or poor chilling pushes it higher.
- Ignoring credit to textile buyers
Receivables are the largest current asset in our sample at 45 days. Longer credit to mills needs a bigger cash credit limit.
- Leaving SO2 safety out of the cost
The scrubber, gas detection and PESO-approved storage must be in the project cost, or appraisal and consent will stall.
How NPCS helps you plan a sodium hydrosulphite plant
- Route and capacityCompare the formate and zinc routes and size the plant for your buyers and budget.
- Material balance and costsSO2, formate, caustic and methanol consumption, with price sensitivity on DSCR.
- Bank-ready project reportProjections, DSCR, break-even and working capital in your lender's format.
- Approvals and layoutPlant layout with SO2 storage, and the consent, PESO and MSIHC list for your state.
NPCS's client list includes 269 specialty chemicals assignments, among them sodium hydrosulphite. The NPCS project team, led by founder Ajay Kumar Gupta, has prepared project reports since 1994.
What's inside the sodium hydrosulphite sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
19 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS sodium hydrosulphite project reports
These are sodium hydrosulphite project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Sodium Hydrosulphite | 20,000 Kgs Per Day | ₹3.5 crore | 31% | 2% | Get this report |
| Sodium Hydrosulphite | 60.0 MT per Day | ₹9.34 crore | 29% | 58% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Sodium Hydrosulphite project report: frequently asked questions
How much does it cost to set up a sodium hydrosulphite plant in India?
Our sample report models a 9.7 MT per day plant on the sodium formate route at a total project cost of ₹1,440 lakh. That includes land, building, machinery and working capital margin. As an indicative guide, a 3–5 MT per day plant needs about ₹7–10 crore and a 20 MT per day plant about ₹20–30 crore. Your project report works out the cost for your site and route.
Which raw materials are used to make sodium hydrosulphite?
The sodium formate route uses sodium formate, sulphur dioxide, caustic soda lye and methanol as the reaction solvent. In our sample report liquid sulphur dioxide is the largest raw material cost at 34%, followed by sodium formate at 32% and caustic soda lye at 22%. Most of the methanol is recovered, so only make-up methanol is a running cost.
Is sodium hydrosulphite manufacturing profitable?
In our illustrative sample the plant earns a 24% return on investment in Year 3 and breaks even at about 34% of capacity. It pays back in about 3.4 years, with an average DSCR of 1.92. Real profit depends on sulphur dioxide and formate prices, methanol losses, the assay you can hold in storage and the credit textile buyers expect.
Is sodium hydrosulphite the same as sodium hydrosulfide?
No. Sodium hydrosulphite, also called sodium dithionite or hydros, is a reducing and bleaching agent for textiles, pulp and clay. Sodium hydrosulfide is a different chemical used mainly in leather, mining and pulping. Online cost reports sometimes mix the two, so check that any figures you use refer to sodium dithionite before you put them in a loan proposal.
Which process is better for a new plant, sodium formate or zinc dust?
Most new plants choose the sodium formate route. It gives a product with very low zinc, which matters because IS 1919:2024 caps zinc at 20 mg/kg, and it avoids handling zinc sludge. The zinc dust route brings zinc removal and sludge handling, which pollution boards and buyers look at closely, so it suits fewer new projects.
Is the sodium hydrosulphite project report pdf free, and can I use it for a bank loan?
The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report. Its figures are representative and not based on a real project, so do not submit it to a bank. For a loan, NPCS prepares a report for your own capacity, route, location and lender.
Is sodium hydrosulphite dangerous to store?
Yes, it needs care. The powder heats up and can catch fire when it gets damp, and it gives off sulphur dioxide when it decomposes. IS 1919:2024 requires airtight drums with a polyethylene liner and a caution label to keep it cool and dry. Plan a dry, ventilated store away from acids and oxidising agents.
Sources and references
- IS 1919:2024 Sodium hydrosulphite, specification (second revision)Bureau of Indian Standards, checked Oct 2026
- IS 1919:1982 record, superseded by IS 1919:2024Bureau of Indian Standards, checked Oct 2026
- Chemicals quality control ordersDepartment of Chemicals and Petrochemicals, Government of India, checked Oct 2026
- SOP for the SMPV(U) Rules, 2016 (2 December 2024)Petroleum and Explosives Safety Organisation, checked Oct 2026
- Manufacture, Storage and Import of Hazardous Chemical Rules, 1989: Schedule 2Ministry of Environment and Forests rules, hosted by Wildlife Institute of India, checked Oct 2026
- Red category industries listState Pollution Control Board, Odisha, checked Oct 2026
