WhatsApp us
Request a Quote

Project reports in Plastic Products

Thermocol Sheets and Moulded Products Manufacturing Project Report

Plant cost, EPS machinery, raw materials and five-year profitability for a thermocol unit, with a free sample report you can open right now.

Plant capacity
2,000 kg per day
Total project cost
₹569 lakh
Plant and machinery
₹300 lakh
Return on investment
16% (Year 3)
Break-even
42% of capacity
Payback period
About 4.2 years

Figures from our illustrative sample report for a typical unit. They show the format of an NPCS report and are not quotes for your project.

What is a thermocol sheets and moulded products project report?

A thermocol sheet and moulded products project report is a detailed project report (DPR) for a unit that turns polystyrene beads into blocks, sheets and shaped packaging using steam. It covers the process, machinery, raw materials, market, project cost, finance, five-year projections, DSCR and break-even that a lender needs.

Entrepreneurs use it to size an EPS plant and apply for a term loan; bank credit officers use it to check that the unit can repay.

Also known as: thermocole sheet project report, EPS manufacturing plant project report, expanded polystyrene project report, thermocol business plan.

What a bank checks in a thermocol project report

A credit officer reading a thermocol report looks first at bead cost, loan cover and how much capacity the plant must sell to stay safe. These are the values in our sample report and why each one matters.

56.1%Raw material share of sales

EPS beads are priced off styrene, so their cost moves with crude oil. Banks compare this share with current bead rates and expect a test of a price rise.

1.52Average DSCR, lowest year 1.34

The debt service coverage ratio is cash available for the loan divided by the instalments due. Lenders usually look for a comfortable margin above 1 in every year.

42%Break-even in Year 3

The plant covers all its costs at 42% of capacity. A low figure gives room for slow months when appliance or seafood orders drop.

45 daysCredit given to buyers

Appliance makers and packaging traders rarely pay on delivery. Debtor days, plus 30 days of bead stock, decide the cash credit limit.

Values are the assumptions in our illustrative sample. Your report uses figures for your capacity, buyers and bead supplier.

How much does a thermocol manufacturing plant cost in India?

Cost depends on daily output, whether you make only blocks and sheets or also moulded packaging, and how much covered storage you build. The middle tier is the unit in our sample report; the others are indicative ranges.

Small unit

₹0.75–1.5 crore

About 500–1,000 kg per day, blocks and sheets only

  • Machinery and boiler₹40–80 lakh
  • Shed and fit-out (or rent)₹20–45 lakh
  • Working capital margin₹8–15 lakh

MSME term loan, often with CGTMSE cover

Our sample report

Mid-size unit

₹569 lakh

2,000 kg per day, 6,60,000 kg per year

  • Plant and machinery₹300 lakh
  • Land and building₹177 lakh
  • Working capital margin₹31 lakh

Term loan ₹427 lakh (75%), promoter ₹142 lakh

Large plant

₹12–25 crore

About 5,000–10,000 kg per day, several moulding lines

  • Machinery and utilities₹5–10 crore
  • Land and building₹4–8 crore
  • Working capital margin₹1–2 crore

Term loan and working capital from a bank or group of banks

Small and large ranges are indicative. Imported European machines, CNC cutters and automatic moulding lines raise the cost.

Thermocol sheet and moulded products plant economics

The sample report models a 2,000 kg per day unit working 330 days a year, starting at 60% of capacity and reaching 80% in Year 5. Output is sold at ₹204 per kg before GST, an average across sheets, blocks and moulded parts.

₹569 lakhTotal project cost
₹942 lakhSales in Year 3
₹89 lakhNet profit in Year 3
1.52Average DSCR
Cost of project (₹ lakh)
Land and site development35.79
Building and civil works140.71
Plant and machinery300.27
Other fixed assets25.94
Contingencies22.05
Preliminary and pre-operative13.12
Working capital margin31.14
Total569.02
Means of finance (₹ lakh)
Promoter's contribution (25%)142.26
Term loan from bank (75%)426.76
Cash credit limit (separate)93.41
Total project cost569.02

Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.

Thermocol manufacturing process, step by step

Every thermocol product starts as hard polystyrene beads about the size of sugar grains. Steam does most of the work, so the boiler runs from the first step to the last moulding cycle.

  1. Pre-expansion

    Beads are steamed in a pre-expander; the pentane inside them boils and the beads swell many times over. Steam time and pressure set the final density, for example 12, 15 or 20 kg per cubic metre.

  2. Aging

    Expanded beads rest in ventilated silos for 6 to 24 hours. Air diffuses into the cells so the beads regain strength before moulding.

  3. Block moulding

    Aged beads fill a large steel mould; steam fuses them into one block, which is then cooled with water spray and vacuum before release.

  4. Shape moulding

    For packaging and boxes, beads are blown into aluminium moulds made for each customer's part and fused with steam in a short cycle.

  5. Conditioning

    Fresh blocks hold moisture and shrink slightly, so they are stored for a day or two before cutting to hold sheet thickness.

  6. Hot wire cutting

    Electrically heated wires slice blocks into sheets, boards and profiles to the thickness the buyer orders.

  7. Scrap recovery and packing

    Trim and rejects are crushed and a small share is mixed back with fresh beads. Finished goods are checked for density and fusion, then bundled.

Raw materials for thermocol sheets and moulded products

The only bulk input is expandable polystyrene beads, bought in grades by bead size and with or without fire retardant. Beads slowly lose pentane in storage, so units keep about a month of stock in a cool shed and buy fire-retardant grade only for insulation orders.

Raw material cost in Year 3 of the sample
Raw materialShare of costYear 3 (₹ lakh)
EPS beads, normal grade68%359.74
EPS beads, fire-retardant grade27%142.84
Mould release agent and antistatic additives5%26.45
Total100%529.03

Machinery for a thermocol sheet and moulding unit

Shape moulding machines with their moulds are the largest item in the sample, followed by the block moulding machine and the pre-expander. The boiler is a separate approval as well as a cost.

MachineWhat it doesSample cost (₹ lakh)
Batch pre-expander with aging silosExpands and matures the beads54.05
Block moulding machineFuses beads into large blocks60.05
Shape moulding machines with aluminium mouldsMakes packaging inserts and boxes66.06
Hot wire block cutting machinesSlices blocks into sheets and profiles30.03
Steam boiler with water softenerSupplies steam to every stage45.04
Vacuum system and air compressorCools moulds and runs pneumatics18.02
EPS scrap crusher and regrind dosingRecovers trim and rejects12.01
Bead conveying and control panelsMoves beads between silos and machines15.01
Total plant and machinery300.27

Moulds are a recurring cost: each new packaging part needs its own aluminium mould. Agree with the buyer who pays for it before you quote.

Who buys thermocol, and what the plastic ban changed

Most demand is industrial. Appliance, electronics and furniture makers need protective packaging; seafood, fruit and vaccine shippers need insulated boxes; cold store and building contractors use boards for insulation.

Thermocol is mostly air, so a truck fills up long before it reaches its weight limit. That keeps competition regional and favours a unit within a few hundred kilometres of its buyers.

  • Appliance and electronics assemblers
  • Seafood exporters and fish traders
  • Pharma and vaccine cold-chain packers
  • Cold storage and insulation contractors
  • Builders and sandwich panel makers
  • Packaging traders and furniture makers

Plan around the ban: since 1 July 2022, polystyrene for decoration and plastic plates, cups and glasses are banned in India. A new unit should not count on decoration sheets or disposable tableware.

Licences and approvals for a thermocol unit

Business registrationUdyam (MSME) registration and GST registration
Pollution board consentConsent to establish and operate from the State Pollution Control Board. Odisha, for example, lists thermocol manufacturing with a boiler in the Orange category under CPCB criteria
BoilerThe steam boiler must be registered before use under the Boilers Act, 2025
Plastic packaging EPRMakers of plastic packaging register as producers on the CPCB EPR portal; micro and small producers still register
Product standardIS 4671:2018 covers expanded polystyrene for thermal insulation; buyers of insulation boards often ask for test results against it
Factory and fireFactory licence where worker thresholds apply, and fire NOC, since beads and finished stock burn easily

Rules vary by state. Confirm categories and thresholds with the state board and fire department before you apply.

Mistakes that weaken a thermocol project report

  • Pricing by piece without density

    Thermocol is costed by bead weight but often sold by sheet or cubic metre. Sales must be worked out per kg at each density you sell.

  • Too little covered storage

    Aging silos, conditioning blocks and finished stock take far more floor space than machines. A small shed caps output.

  • Leaving out moulds

    Shape moulding revenue is shown, but the aluminium moulds for each part are not costed or charged to buyers.

  • Counting on banned products

    Sales plans built on decoration sheets or thermocol plates and glasses fail once the bank checks the single-use plastic ban.

  • Ignoring boiler time and fuel

    Boiler registration and fuel supply decide the start date and a large share of running cost; both need a line in the report.

How NPCS helps you set up a thermocol unit

  • Product mix and densityDecide the split between sheets, insulation boards and moulded packaging for your buyers.
  • Machinery and boiler sizingMatch pre-expander, moulding and boiler capacity, and compare supplier quotations.
  • Bank-ready project reportProjections, DSCR and working capital in the format your lender expects.
  • Approvals and layoutStorage-led plant layout and the consent, boiler and EPR steps for your state.

NPCS's published client list includes 62 assignments in plastic products, among them a project report on expanded polystyrene in 2026. NPCS, led by founder Ajay Kumar Gupta, has prepared project reports since 1994.

What's inside the thermocol sheets and moulded products sample report

  1. Introduction
  2. Uses and applications
  3. Market potential
  4. Manufacturing process
  5. Raw materials
  6. Plant and machinery
  7. Land, building and utilities
  8. Manpower
  9. Licences and approvals
  10. Project cost and means of finance
  11. Working capital
  12. Projected profitability
  13. Cash flow statement
  14. Projected balance sheet
  15. Depreciation
  16. Term loan repayment
  17. Debt service coverage
  18. Break-even analysis
  19. Financial ratios
  20. Key assumptions
  21. Conclusion
  22. Monthly loan repayment schedule

19 pages, five-year projections, illustrative figures.

Open sample report

Free sample or a report for your project?

What you getFree sampleNPCS report for your project
Capacity and locationTypical unitYour capacity, site and state
FiguresIllustrativeBuilt on current prices and quotations
Machinery suppliers and quotationsNoYes
Market survey for your regionNoYes
Bank or scheme format (PMEGP, term loan)NoYes
Use for a loan applicationNoYes

Find NPCS project reports in your budget

Find other projects that fit your budget Search NPCS project profiles by investment, return and break-even, the same search as our Startup Selector.

What clients say about NPCS

4.7

264 Google reviews, as of 20 Oct 2026

Clients most often mention

  • feasibility reports 18
  • project report 16
  • helpful for startups 15
  • detailed reports 8
Read all reviews on Google
  • Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.

    Piyush Singh, Google review, 2026

  • Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended

    Saroj Yadav, Google review, 2026 View on Google

  • In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.

    Shrishti Gautam, Google review, 2026

  • NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.

    Raj Yadav, Google review, 2026

Thermocol Sheets and Moulded Products project report: frequently asked questions

How much does it cost to start a thermocol manufacturing plant in India?

A small block and sheet unit of 500–1,000 kg per day needs roughly ₹0.75–1.5 crore. A plant of 5,000 kg per day or more needs ₹12–25 crore. Our sample report models a 2,000 kg per day unit at ₹569 lakh, including land, building and working capital margin. These are indicative figures; your report costs your own capacity and site.

What raw material is used to make thermocol?

Thermocol is made from expandable polystyrene (EPS) beads, small polystyrene granules that carry pentane as a blowing agent. Steam softens the beads and the pentane makes them swell. In our sample report, normal and fire-retardant grade beads together make up 95% of raw material cost; mould release and antistatic additives make up the rest.

Which machines are needed for thermocol sheet making?

You need a pre-expander with aging silos, a block moulding machine, hot wire cutting machines to slice blocks into sheets, and a steam boiler with water softener. Packaging units add shape moulding machines and an aluminium mould for each part. A vacuum system, air compressor, bead conveying and a scrap crusher complete the line.

Is thermocol manufacturing profitable?

In our illustrative sample, a 2,000 kg per day unit earns a 16% return on investment in Year 3. It breaks even at about 42% of capacity and pays back in about 4.2 years. Real profit depends on bead prices, boiler fuel, the share of higher-priced moulded parts and how quickly appliance and seafood buyers pay.

Is thermocol banned in India?

No, not as a whole. Since 1 July 2022 the central ban on single-use plastic covers polystyrene (thermocol) for decoration and plastic plates, cups, glasses and cutlery. Thermocol packaging, insulated boxes and insulation boards are not in that list, but packaging makers must register for extended producer responsibility (EPR) on the CPCB portal.

Thermocol ka business kaise shuru kare?

Start by fixing the buyers you will serve, such as appliance makers, fish exporters or insulation contractors, because that decides between sheets and moulded parts. Then choose capacity and find a site with room for storage and a boiler. Get machinery quotations, prepare a project report for the bank, and apply for pollution consent and boiler registration.

Can I get a PMEGP or MSME loan for a thermocol unit?

PMEGP covers manufacturing projects up to ₹50 lakh, which suits only a very small unit, since a block moulding line with a boiler usually costs more. Most thermocol plants take an MSME term loan and cash credit, often with CGTMSE guarantee cover. Every lender asks for a project report with projections, DSCR and working capital.

Is the sample report free and can I use it for a loan?

The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report. Its figures are representative, not taken from a real project, so do not submit it to a bank. For a loan, NPCS prepares a report for your own capacity, location and loan scheme.

Sources and references

  1. Ban on Single Use Plastic in India (explainer, 1 July 2022)Ministry of Environment, Forest and Climate Change, via PIB, checked Oct 2026
  2. IS 4671:2018 Expanded polystyrene for thermal insulation purposesBureau of Indian Standards, checked Oct 2026
  3. The Boilers Act, 2025 (Act 12 of 2025)India Code, Government of India, checked Oct 2026
  4. Categorisation of industrial sectors under Orange as per CPCB criteriaState Pollution Control Board, Odisha, checked Oct 2026
  5. Guidelines for EPR registration for plastic packagingTamil Nadu Pollution Control Board, checked Oct 2026
  6. Prime Minister's Employment Generation Programme (PMEGP) guideDistrict Industries Centre, Ganjam, Government of Odisha, checked Oct 2026
  7. Credit Guarantee Fund Trust for Micro and Small EnterprisesCGTMSE, checked Oct 2026
Ajay Kumar Gupta, founder of NPCS

Who prepares NPCS reports

The NPCS project team, led by Ajay Kumar Gupta

This page and its sample report are prepared and reviewed by the NPCS project team, which has written techno-economic feasibility studies and detailed project reports since 1994.

Ajay Kumar Gupta founded Niir Project Consultancy Services (NPCS) and leads the organisation. With 40 years of experience in MSME project consulting, he has built the team that has delivered more than 28,000 project reports for clients worldwide, helping entrepreneurs plan and finance profitable manufacturing businesses.

Ajay Kumar Gupta on LinkedIn

Published
Last updated
Next review
Oct 2027
Reviewed by
NPCS project team

This page is reviewed every 12 months, or sooner when scheme limits, GST rates, BIS rules or pollution categories change. The sample report is illustrative: its figures are generated from industry-typical ratios for a unit of this size, checked so every statement balances, and are not taken from any client project.

Planning a different plastic products project?

These are a few of the projects we advise on. NPCS's published client list records 62 plastic products assignments, so tell us what you are planning.

Tell us your project

Recent plastic products assignments

  • Epseca
    Project Report on Expanded PolystyreneKenya, 2026
  • Vensar Constructions Company Limited
    Investment and Project Report on HDPE PipesBhopal, 2025
  • Kathir Eco Green Ventures Pvt. Ltd
    Technical and Financial Feasibility Report on Biodegradable Plastic Bags from Corn StarchNew Delhi, 2023
  • Brian McCormick
    Biodegradable Plastics and Polymers (Recent DevelopmentsUnited States, 2023
  • Bevel Technologies-He International JV (BT-HI JV)
    Techno-Economic Project Study on Fishing Nets to PelletBangladesh, 2023
  • Sar Denim Pvt Ltd
    Technical and Financial Feasibility Report on Bio-Degradable Plastic PolymerAnantapur, 2022
  • B.R. Capital Pvt. Ltd
    Techno-Economic Project Report on Double Wall Corrugated PipesKolkata, 2022
  • Ayasya Infrastructure LLP
    Pre-Feasibility Report on Recycled Polyester Fiber from Used PET BottlesMalkajgiri, 2022

Get a thermocol sheets and moulded products project report for your plant

Tell us your planned capacity, location and loan scheme. Our team will confirm the scope and price of a report built on current machinery quotations and raw material prices for your region.

Reports are prepared in the format banks and PMEGP offices ask for, with five-year projections, DSCR and break-even.

Request a Thermocol Sheets and Moulded Products Project Report

Share your plan and our team will call you back within 24 hours.

Start with the sample, then plan your own unit

Open the free thermocol sheets and moulded products sample report to see the format, then talk to NPCS about a report for your capacity and location.

Sample PDF WhatsApp
Thermocol Sheets and Moulded Products sample project report (illustrative) Download New tab

Illustrative sample. Figures are representative and not from a real project.

Call Us WhatsApp