What is a lubricant and grease blending project report?
A lubricant and grease blending plant project report is a detailed project report (DPR) for a plant that blends engine, gear and hydraulic oils and also makes grease. It covers the process, machinery, raw materials, licences, project cost, means of finance, five-year projections, DSCR and break-even.
Entrepreneurs and oil distributors use it to size the plant and raise a term loan; banks use it to check that thin blending margins can repay the debt.
Also known as: lube oil and grease blending plant project report, lubricant blending plant DPR, lubricant manufacturing business plan, grease and lube oil plant project report.
Lubricant and grease blending plant cost in India
Our sample report models a plant blending 8.5 kilolitres per day of oils and grease, or 2,805 kilolitres a year, over 330 working days. It starts at 60% capacity and reaches 80% in Year 5, selling at ₹1,34,000 per kilolitre ex-factory, or ₹134 a litre across the product mix.
| Land and site development | 47.55 |
|---|---|
| Building and civil works | 136.31 |
| Plant and machinery | 358.61 |
| Other fixed assets | 51.82 |
| Contingencies | 24.75 |
| Preliminary and pre-operative | 15.48 |
| Working capital margin | 90.39 |
| Total | 724.91 |
| Promoter's contribution (25%) | 181.23 |
|---|---|
| Term loan from bank (75%) | 543.68 |
| Cash credit limit (separate) | 271.18 |
| Total project cost | 724.91 |
DSCR (debt service coverage ratio) is the cash available for the loan divided by the instalment. Its lowest value is 1.47, in Year 2, when full repayments start. Lenders look hard at that year, because blending margins leave little room if base oil prices rise.
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.
Lubricant and grease manufacturing process
Oil blending is a physical mix with no reaction. Grease is different: the thickener is made in the kettle by a chemical reaction, so the grease line runs hotter and takes far longer per batch.
- Base oil receipt and testing
Each tanker is sampled for viscosity, flash point and water before unloading, because one wet or off-grade load can spoil a whole tank.
- Batch blending of oils
Base oils and the additive package are weighed into a jacketed kettle and stirred warm until the blend is uniform, usually within a few hours.
- Saponification for grease
For lithium grease, 12-hydroxystearic acid and lithium hydroxide react in part of the base oil at about 82°C to form the soap thickener.
- Dehydration and controlled cooling
The batch is heated to about 200°C to drive off water, then cooled with more base oil at a set rate, since the soap fibres form during cooling.
- Milling and deaeration
A homogeniser disperses the soap and a deaerator removes trapped air; over-milling can make the grease bleed oil later.
- Batch testing
Oils are checked for viscosity, flash point and pour point; grease for cone penetration (its consistency grade) and dropping point.
- Filtration and filling
Oils pass through bag filters into pouches, bottles, buckets and barrels; grease is filled warm into tins, buckets and drums.
Lithium or calcium grease: which line to install?
The grease you choose fixes the kettle, the heating system and the batch time. Most small Indian plants start with one of these two soap types and add the other once dealers ask for it.
| Point | Calcium grease | Lithium grease |
|---|---|---|
| Thickener | Calcium hydroxide with fatty acids or tallow | Lithium hydroxide with 12-hydroxystearic acid |
| Cooking temperature | Lower; water is kept in to stabilise the grease | Higher; the batch is taken to about 200°C |
| Heat resistance | Softens below about 100°C | Dropping point usually about 180°C or more |
| Typical uses | Chassis, water pumps, farm equipment | Wheel bearings, motors, multipurpose automotive and industrial |
| Raw material cost | Lower | Higher; lithium hydroxide prices swing widely |
| Reference standard | Buyer or tender specification | IS 7623 (multipurpose industrial grease), IS 506 (automotive grease) |
An open-kettle lithium batch takes about 9–21 hours from charging to finishing; a pressure reactor with a finishing kettle cuts this to about 4.5–8.5 hours (STLE).
Base oil and additives: the raw material bill
Raw materials take 64.7% of sales in our sample, far more than in most chemical plants, and base oil alone is 70% of that bill. Base oil comes from Indian refineries and imports and is priced off crude and the rupee, so buyers usually lock prices for a month at a time.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Base oils (Group I and Group II) | 70% | 1,192.49 |
| Additive packages and viscosity modifiers | 17% | 289.60 |
| Lithium hydroxide and 12-hydroxystearic acid | 6% | 102.21 |
| Calcium hydroxide and fatty acids for grease | 3% | 51.11 |
| Pour point depressant, dyes and antioxidants | 4% | 68.14 |
| Total | 100% | 1,703.55 |
Why base oil decides the loan: in our sample, base oil costs ₹1,192.49 lakh in Year 3 against a profit before tax of ₹194.38 lakh. A 5% rise in base oil price that you cannot pass on would remove close to a third of that profit.
Machinery for a lube oil and grease plant
Blending equipment is simple; most of the spend goes on tanks, heating and filling. Storage tanks are the largest item, because you hold several base oil grades and finished grades at once.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Base oil and finished product storage tanks | Hold base oil grades and blended stock | 78.89 |
| Jacketed blending kettles with agitators | Warm and mix oils with additives | 64.55 |
| Grease kettle with thermic fluid heating | Makes the soap and cooks the grease | 57.38 |
| Grease homogeniser and deaerator | Smooths the grease and removes air | 32.28 |
| Transfer pumps, pipelines and bag filters | Move and clean oil between tanks | 32.27 |
| Automatic oil filling and capping line | Fills pouches, bottles and buckets | 43.03 |
| Grease filling machine | Fills tins, buckets and drums | 17.93 |
| Quality control laboratory | Tests viscosity, flash point, penetration | 21.52 |
| Electrical panel and weighbridge | Power distribution and tanker weighing | 10.76 |
| Total plant and machinery | 358.61 | |
Costs are the sample report's estimates for an 8.5 kilolitres per day plant. Get current quotations before you finalise.
Licences, EPR and standards for a lubricant plant
Two rules set lubricant units apart from other chemical plants: extended producer responsibility (EPR) for used oil, and a pollution category that changes once you start heating grease.
| Pollution board consent | Lubricating oil and grease blending at normal temperature appears in the green category list. A heated grease kettle may move the unit to a higher category, so confirm with your State Pollution Control Board before applying. |
|---|---|
| EPR for used oil | Anyone selling lubricating oil under their own brand is a producer and registers on the CPCB used oil EPR portal, then buys EPR certificates from registered recyclers each year. |
| Petroleum storage | Class C petroleum (flash point 65–93°C) below 45,000 litres needs no PESO licence, only a one-time approval. Most base oils flash well above this range; check any solvent or low-flash stock with PESO. |
| Product standards | IS 13656 for engine crankcase oils, IS 7623 for multipurpose industrial grease and IS 506 for automotive grease are the usual quality references; OEM and API grades are set by the additive supplier. |
| Basic registrations | Udyam and GST registration, factory licence where thresholds apply, and fire NOC for the tank farm. |
Rules checked October 2026. Categories and limits vary by state; confirm current terms with each authority.
Who buys lubricants and grease from a regional plant?
Demand comes from oil changes on two-wheelers, cars, trucks and tractors, which fall due at fixed intervals. Factories add steady demand, topping up hydraulic, gear and spindle oils every week. National brands own the retail shelf, so a new plant usually wins on direct supply, price and quick delivery to buyers who do not need a big brand name.
- Automobile workshops and spare-parts dealers
- Transport and fleet operators buying in barrels
- Tractor and farm equipment dealers
- Factories and engineering workshops
- Private-label traders who sell under their own brand
Where grease helps: workshops and fleets buy oil and grease together. A plant that supplies both on one invoice, with matching grades and one delivery, is easier for them to stock than an oil-only blender.
Mistakes that weaken a lubricant and grease blending plant project report
- Pricing at MRP instead of distributor rates
Lubricant MRPs carry large trade margins. Sales must be at the ex-factory price you will actually get, or DSCR comes out far too high.
- One base oil price for five years
Base oil follows crude and the rupee. A report without a price sensitivity test does not answer the lender's first question.
- Leaving out the EPR cost
An own-brand blender must buy EPR certificates every year, and the target rises over time. It belongs in running costs.
- Too little working capital for credit sales
Workshops and dealers expect credit. In our sample, trade receivables are the biggest current asset, at ₹278.04 lakh in Year 1.
- Costing the grease line like cold blending
Grease needs a thermic fluid heater, longer batches and a separate pollution review; treating it as a mixing step under-states cost and time.
How NPCS helps you set up a lubricant and grease plant
- Product mix and capacityDecide the split between engine, gear, hydraulic and industrial oils and grease for your market.
- Tank farm and machinerySize storage, kettles, grease line and filling machines, and compare quotations.
- Bank-ready project reportProjections, DSCR, base oil price sensitivity and working capital in your lender's format.
- Approvals and EPRPollution category, PESO, EPR registration and the approvals list for your state.
NPCS, led by founder Ajay Kumar Gupta, has prepared project reports for specialty chemical and petroleum product units since 1994, for clients in India and abroad.
What's inside the lubricant and grease blending sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
19 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS lubricant and grease blending project reports
These are lubricant and grease blending project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Lubricants Blending Plant (Lubricants/Grease) | Blended Lubricating Oil, 4 KL/ Day , Greases:1 KL/Day | ₹4.65 crore | 25% | 52% | Get this report |
| Lubricants Blending Plant Lubricants/Grease/Brake Fluid/Coolant) | On request | ₹13.3 crore | 26% | 40% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Lubricant and Grease Blending project report: frequently asked questions
How much does a lubricant blending plant cost in India?
An oil-only blending unit of about 2–4 kilolitres per day needs roughly ₹2–4 crore. A combined oil and grease plant of 8–10 kilolitres per day needs about ₹6–9 crore, including land, building and working capital margin. These ranges are indicative. Our sample report models an 8.5 kilolitres per day plant at ₹724.91 lakh, with plant and machinery at ₹358.61 lakh.
What raw materials are used to make lubricants and grease?
Base oil is the main input, usually Group I or Group II mineral oil bought by tanker. Additive packages and viscosity modifiers set the performance grade. Grease also needs a thickener, most often lithium hydroxide with 12-hydroxystearic acid, or calcium hydroxide with fatty acids. In our sample, base oils make up 70% of raw material cost and additives 17%.
Which machines are needed for a lube oil and grease plant?
For oils you need storage tanks, jacketed blending kettles with agitators, transfer pumps with bag filters and an oil filling line. Grease adds a kettle heated by thermic fluid, a homogeniser, a deaerator and a grease filling machine, and both need a testing laboratory. Storage tanks are the largest machinery item in our sample, at ₹78.89 lakh.
Is lubricant blending a profitable business?
It can be, but margins are thin because base oil is most of the cost. In our illustrative sample, Year 3 sales are ₹2,631.09 lakh and net profit ₹145.78 lakh, with a 20.1% return on investment and break-even at 46.4% of capacity. Profit depends on buying base oil well, holding prices with distributors and keeping receivables under control.
Do I need EPR registration to sell lubricants under my own brand?
Yes. Under the used oil EPR rules notified in September 2023, anyone who sells lubricating oil under their own brand, even when using bought-in base oil, is a producer. Producers register on the CPCB used oil EPR portal and meet a recycling target by buying EPR certificates from registered recyclers. If you only blend for another brand owner, the duty sits with that owner.
Can I start with oil blending and add grease later?
Yes, and many units do. Cold or warm blending of oils needs tanks, kettles and filling lines; grease adds a heated kettle, thermic fluid heater, homogeniser and a stricter pollution review. Plan the shed, power load and tank farm for both from day one so the grease line can be added without rebuilding the layout or reapplying for every consent.
Is the sample report free and can I use it for a loan?
The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report. Its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, product mix, location and lender.
Sources and references
- Standard operating procedure for producer registration, EPR for used oilCentral Pollution Control Board, checked Oct 2026
- Green category industries (revised 2020)Puducherry Pollution Control Committee, checked Oct 2026
- Published Indian Standards: greasesBureau of Indian Standards, checked Oct 2026
- IS 10356 details (withdrawn, superseded by IS 13656)Bureau of Indian Standards, checked Oct 2026
- FAQs on the Petroleum Rules, 2002Petroleum and Explosives Safety Organisation, checked Oct 2026
- Grease manufacturing: chemistries and processesSociety of Tribologists and Lubrication Engineers, checked Oct 2026
