What is a vitrified floor tiles project report?
A vitrified floor tiles project report is a detailed project report (DPR) for a plant that grinds feldspar and clay, presses the powder into tiles and fires them in a roller kiln until the body turns glassy. It sets out the process, machinery, raw materials, market, project cost, finance, five-year projections, DSCR and break-even.
Promoters use it to size the press and kiln line and raise a term loan; bankers use it to judge whether the plant can carry its debt.
Also known as: vitrified tiles manufacturing plant project report, project report on vitrified floor tiles, vitrified tiles business plan, GVT tiles plant DPR.
Vitrified floor tiles manufacturing plant cost in India
Our sample report models one press and one roller kiln making 4,700 square metres of tiles per day, or 15,51,000 square metres a year over 330 working days. Output starts at 60% of capacity and reaches 80% in Year 5, at an ex-factory price of ₹315 per square metre.
Plant and machinery is about half of the project cost. That is typical of tiles, where the kiln, press and spray dryer are large, imported or engineered items and the building must house a long, straight line.
| Land and site development | 278.09 |
|---|---|
| Building and civil works | 608.23 |
| Plant and machinery | 1,221.84 |
| Other fixed assets | 98.97 |
| Contingencies | 91.50 |
| Preliminary and pre-operative | 57.47 |
| Working capital margin | 115.74 |
| Total | 2,471.84 |
| Promoter's contribution (25%) | 617.96 |
|---|---|
| Term loan from bank (75%) | 1,853.88 |
| Cash credit limit (separate) | 347.23 |
| Total project cost | 2,471.84 |
Term loan at 10.5% with a 6-month moratorium and 72 monthly instalments. The lowest DSCR is 1.73, in Year 2. All figures are illustrative.
Vitrified floor tiles manufacturing process
Vitrified tiles are made by the dry-pressing route: the body is ground wet, dried to granules, pressed, decorated and fired once. The line runs continuously, so a stop at the kiln holds up everything before it.
- Wet grinding
Feldspar, clays and quartz are weighed and ground with water and deflocculant in ball mills to a fine slip, then screened and stored in agitated tanks.
- Spray drying
The slip is sprayed into a hot air chamber and dries to free-flowing granules with about 6% moisture, ready to fill the press dies evenly.
- Pressing
A high-tonnage hydraulic press compacts the granules into green tiles; uneven filling here shows up later as warped or cracked tiles.
- Drying
A vertical or horizontal dryer removes the remaining moisture so tiles do not crack when they meet glaze or kiln heat.
- Glazing and printing
Engobe and glaze are sprayed or poured on, and a digital inkjet printer lays down the design from a file, so a new design needs no screens.
- Firing
Tiles travel on ceramic rollers through a gas-fired kiln at about 1,200°C, where the feldspar melts and fuses the body.
- Polishing and squaring
Polished grades are ground and buffed with abrasive heads, and the edges are squared so tiles lay with thin joints.
- Sorting and packing
Tiles are checked for size, flatness, shade and surface defects, graded and packed in cartons by shade and batch.
Which type of vitrified tile should your plant make?
"Vitrified" covers several products made on similar lines. The type you choose decides the press, decoration and polishing equipment, so it is fixed before machinery is ordered. Our sample report models a glazed line with polishing.
| Glazed vitrified tiles (GVT) | Vitrified body with a printed glaze; the widest range of looks, from wood to stone, made with a digital printer |
|---|---|
| Polished glazed (PGVT) | GVT with the glaze polished to a high gloss; needs a polishing line and more abrasives |
| Double charge | Two layers of coloured powder pressed together, so the pattern runs a few millimetres deep; needs a double-charge press feeder |
| Full body | Same colour through the whole thickness, so chips hardly show; suits heavy-traffic and commercial floors |
| Soluble salt | Design printed with salts that soak into the surface before polishing; the simplest and lowest-priced type |
Raw materials for vitrified floor tiles
Feldspar is the flux that melts in the kiln and makes the body glassy, so it is the largest purchase. Clays give the green tile its strength at the press, and quartz controls shrinkage. Body minerals are bulky, so freight from the mine often costs as much as the mineral itself.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Sodium and potash feldspar | 34% | 355.35 |
| Ball clay and china clay | 28% | 292.64 |
| Glaze, frit and engobe | 16% | 167.22 |
| Quartz and silica sand | 10% | 104.51 |
| Digital printing inks | 8% | 83.61 |
| Deflocculants and body additives | 4% | 41.81 |
| Total | 100% | 1,045.14 |
In the sample, raw materials are 30.6% of sales and packing a further 6.6%.
Machinery for a vitrified tiles plant
The roller kiln and the hydraulic press together take 42% of the machinery budget in our sample. Their size sets the plant's daily output, so every other machine is matched to them.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Roller kiln | Fires and vitrifies the tiles | 268.80 |
| Hydraulic tile press | Forms green tiles from granules | 244.37 |
| Spray dryer with hot air generator | Turns slip into press granules | 171.06 |
| Glazing line with digital inkjet printer | Applies glaze and prints the design | 171.06 |
| Continuous ball mill and slip tanks | Grinds and stores the body slip | 146.62 |
| Polishing and squaring line | Polishes the face, squares the edges | 109.97 |
| Vertical dryer | Dries green tiles before glazing | 73.31 |
| Sorting and packing line | Grades and cartons the tiles | 36.65 |
| Total plant and machinery | 1,221.84 | |
Costs are the sample report's estimates. Kiln length, press tonnage and tile size change them, so get current quotations before you finalise.
Manpower, power and fuel for a tile plant
A tile line runs three shifts because the kiln cannot be switched off each night. Power and fuel cost ₹502.67 lakh in Year 3 of our sample, or 14.7% of sales, most of it gas for the kiln and spray dryer.
| Category | Number | Annual cost (₹ lakh) |
|---|---|---|
| Management, supervision and administration | 25 | 87.00 |
| Skilled workers and operators | 59 | 130.98 |
| Semi-skilled and unskilled workers | 85 | 122.40 |
| Total | 169 | 340.38 |
Wages rise 5% a year in the projections. Kiln and press operators are the hardest posts to fill outside tile clusters.
Standards and approvals for a vitrified tiles plant
| Product standard | IS 15622:2017 for pressed ceramic tiles, which replaced older group standards such as IS 13755 |
|---|---|
| Quality tests | IS 13630 series: water absorption, breaking strength and modulus of rupture, surface and deep abrasion, and other tests |
| Pollution board consent | Consent to establish and operate from the State Pollution Control Board; tile making with oil or gas-fired kilns is on the CPCB Orange list |
| Business registration | Udyam (MSME) registration where eligible, and GST registration |
| Factory and fire | Factory licence and fire safety NOC; rules and thresholds vary by state |
| Gas and power | Natural gas supply agreement and an industrial power connection sanctioned for the connected load |
Standards and categories checked October 2026. Confirm with BIS whether a Quality Control Order applies to your product when you start production.
Market for vitrified floor tiles in India
Vitrified tiles have replaced much of the marble, mosaic and ordinary ceramic tile once used on Indian floors. They absorb very little water, resist stains and come in large formats such as 600 × 1200 mm, which suits both homes and commercial buildings.
Most Indian capacity is in the Morbi cluster in Gujarat. A new plant elsewhere competes on freight, faster supply to local dealers and a design range that suits its region.
- Tile and sanitaryware dealers
- Real estate developers and builders
- Interior and flooring contractors
- Government and institutional projects
- Exporters and overseas importers
Where the money is made: the gap between first-grade and lower-grade tiles is large. A plant that keeps shade, size and flatness consistent sells more of its output at the full price.
Mistakes that weaken a vitrified floor tiles project report
- Taking gas cost as fixed
Fuel is one of the largest running costs. A report should test a rise in gas price, because it moves profit and DSCR more than most other inputs.
- Selling every tile at first-grade price
Every kiln produces some lower grades and rejects. Revenue must use a realistic grade mix, not the price of the best tile.
- Leaving out polishing losses
Polished grades lose surface material and use abrasives, water and power. These belong in the cost of a PGVT line.
- Under-sizing working capital
In our sample, money owed by dealers is the largest current asset at ₹361.40 lakh in Year 1. Many designs and shades also add to finished stock.
- Using Morbi prices far from Morbi
Minerals, glaze and spares cost more away from the cluster. Freight in and out should be priced for your site.
How NPCS helps you plan a vitrified tiles plant
- Product and capacityChoose GVT, PGVT, double charge or full body, tile sizes and daily output for your market.
- Line and suppliersMatch press tonnage, kiln length and polishing line, and compare quotations.
- Bank-ready project reportProjections, DSCR, gas cost sensitivity and working capital in your lender's format.
- Layout and approvalsPlant layout, gas and power load, and the approvals list for your state.
NPCS's client list shows 31 assignments in ceramics and glass. The NPCS project team has prepared feasibility studies and project reports since 1994 for entrepreneurs, banks and companies.
What's inside the vitrified floor tiles sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
19 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS vitrified floor tiles project reports
These are vitrified floor tiles project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Vitrified Floor Tiles | 5000 Sq.Mt./Day | ₹58.68 crore | 25% | 45% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Vitrified Floor Tiles project report: frequently asked questions
How much does it cost to set up a vitrified tiles plant in India?
Our sample report models a single-line plant of 4,700 square metres per day at a total project cost of ₹2,472 lakh, of which plant and machinery is ₹1,222 lakh. Plants with several presses and kilns cost many times more. Land, building, gas connection and the polishing line are the items that move the figure most, so your report prices them for your site.
What raw materials are used to make vitrified tiles?
The body is a mix of sodium and potash feldspar, ball clay, china clay and quartz, ground with water and deflocculants. Glazed tiles also need engobe, glaze, frit and digital printing inks. In our sample report feldspar is the largest item at 34% of raw material cost, followed by ball clay and china clay at 28%.
Which machines are needed for vitrified tile manufacturing?
A vitrified tile line needs ball mills and slip tanks, a spray dryer, a hydraulic tile press, a vertical dryer, a glazing line with a digital inkjet printer, a gas-fired roller kiln, a polishing and squaring line, and sorting and packing equipment. In our sample the roller kiln is the costliest item at ₹268.80 lakh.
Is vitrified tile manufacturing profitable?
In our illustrative sample the plant earns a 17% return on investment in Year 3, breaks even at 43% of capacity and pays back in about 4.2 years, with an average DSCR of 1.95. Real results depend on gas price, the share of first-grade output, design range and how much credit dealers take.
What is the difference between vitrified tiles and ceramic tiles?
Both are pressed from clay-based powder, but vitrified tiles use more feldspar and are fired hotter, so the body fuses into a dense, glassy mass. That gives very low water absorption and higher strength than ordinary ceramic tiles, which makes vitrified tiles the usual choice for floors and ceramic tiles common for walls.
Which BIS standard applies to vitrified floor tiles?
Pressed ceramic tiles, including vitrified floor tiles, are covered by IS 15622:2017, which replaced older standards such as IS 13755. Water absorption, breaking strength and abrasion are tested by the methods in the IS 13630 series. Check with BIS whether a Quality Control Order makes certification compulsory when you start production.
Is the sample report free and can I use it for a loan?
Yes, the sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report; its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and lender.
Sources and references
- Compendium of Indian Standards on Ceramic Tiles and TestingBureau of Indian Standards, Civil Engineering Department, checked Oct 2026
- IS 13755:1993 standard details (withdrawn, superseded by IS 15622)Bureau of Indian Standards, checked Oct 2026
- Categorization of industrial sectors under Orange as per CPCB criteriaState Pollution Control Board, Odisha, checked Oct 2026
