What is a hydrogen gas from methanol cracking project report?
A hydrogen gas from methanol cracking project report is a detailed project report (DPR) for a plant that reforms methanol and water vapour over a catalyst and purifies the gas by pressure swing adsorption. It sets out the process, machinery, methanol use, project cost, finance, five-year projections, DSCR and break-even.
Gas companies and industrial users use it to size an on-site hydrogen plant and raise a term loan; lenders use it to test whether the gas price covers methanol and debt.
Also known as: methanol to hydrogen plant project report, methanol reforming hydrogen plant DPR, methanol cracker hydrogen generation plant, hydrogen gas from methanol cracking business plan.
Hydrogen gas from methanol cracking manufacturing plant cost in India
Our sample report models a plant making 8,000 normal cubic metres (Nm3) of hydrogen per day. That is roughly 333 Nm3 an hour on a 24-hour run, for 330 days a year. It starts at 60% capacity, reaches 80% in Year 5 and sells hydrogen at ₹60.10 per Nm3 before GST.
Plant and machinery is under half the project cost. Land, the methanol tank farm, a pressure-rated building and working capital make up the rest, so the site you choose moves the total more than the reformer does.
| Land and site development | 62.61 |
|---|---|
| Building and civil works | 135.41 |
| Plant and machinery | 280.88 |
| Other fixed assets | 38.76 |
| Contingencies | 20.81 |
| Preliminary and pre-operative | 13.46 |
| Working capital margin | 35.81 |
| Total | 587.74 |
| Promoter's contribution (25%) | 146.94 |
|---|---|
| Term loan from bank (75%) | 440.80 |
| Cash credit limit (separate) | 107.43 |
| Total project cost | 587.74 |
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments; lowest DSCR 1.91. All figures are illustrative.
Hydrogen gas from methanol cracking manufacturing process
The plant runs methanol steam reforming: CH3OH + H2O gives CO2 + 3H2. It is a low-temperature, low-pressure process, which is why it fits sites that cannot handle a natural gas reformer.
- Feed mixing
Methanol and demineralised water are blended at a fixed molar ratio, usually with a little extra water, and pumped to the operating pressure, often up to 2.5 MPa.
- Vaporising and superheating
Hot thermal oil and heat from the outgoing gas turn the liquid into superheated vapour before it reaches the catalyst.
- Catalytic reforming
Tubes packed with copper-zinc catalyst, held at about 220–290°C by thermal oil, convert the vapour into a gas of roughly 75% hydrogen and 24% CO2.
- Cooling and condensate recovery
The reformed gas is cooled; unreacted methanol and water condense out and go back to the feed tank, which keeps methanol loss low.
- PSA purification
Four to ten adsorber beds take out CO2, carbon monoxide and moisture; the purge off-gas is burnt in the thermal oil heater to save fuel.
- Buffer, compression and supply
Pure hydrogen goes to a buffer vessel and then by pipeline to the user, or through a compressor into cylinders or tube trailers.
Methanol cracking or electrolysis: which route fits?
At 50–1,000 Nm3 an hour, a buyer has four realistic ways to get hydrogen. Methanol cracking wins where there is no gas pipeline and power is costly; electrolysis wins where cheap or renewable power is available.
| Methanol cracking | Liquid feed that is easy to truck and store; low energy use per Nm3; cost tracks the methanol price; CO2 is released at the plant |
|---|---|
| Water electrolysis | Needs only water and power, very high purity; power is most of the running cost, so it pays only with low tariffs or captive renewables |
| Natural gas reforming | Lowest cost at large scale, but needs a pipeline connection and a high-temperature furnace; rarely viable below a few hundred Nm3 an hour |
| Bought-in cylinders | No plant to run, but the highest cost per Nm3 once you count freight, cylinder rent and handling; supply depends on a distant filler |
Not green hydrogen: reforming fossil methanol releases about 7.3 kg of CO2 per kg of hydrogen. India's Green Hydrogen Standard allows 2 kg. Buyers who need green credits will ask about this early.
Methanol and other raw materials for hydrogen
Methanol is 86% of raw material cost in our sample, and raw materials are 46% of sales. India imports almost all its methanol, mostly through west coast ports, so plants hold about 30 days of stock and buy from two or more importers.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Methanol | 86% | 439.03 |
| Demineralised water | 2% | 10.21 |
| Reforming catalyst and PSA adsorbent replacement | 8% | 40.84 |
| Thermal oil and process chemicals | 4% | 20.42 |
| Total | 100% | 510.50 |
Use AA or IMPCA grade methanol with low chloride and sulphur; both poison the copper catalyst and shorten its 2–4 year life (indicative).
Machinery for a methanol cracking hydrogen plant
Most suppliers ship the reformer, PSA and controls as skids, so civil work is light. The PSA unit is the largest single item in our sample, ahead of the reforming reactor.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| PSA hydrogen purification unit | Strips CO2, CO and moisture to the buyer's purity | 70.22 |
| Methanol reforming reactor with catalyst charge | Converts methanol and steam into hydrogen-rich gas | 61.79 |
| Feed preheater, vaporiser and superheater | Turns the liquid feed into hot vapour | 28.09 |
| Thermal oil heater and circulation system | Holds the reactor at reaction temperature | 28.09 |
| Hydrogen compressor and buffer vessel | Stores and raises gas to supply pressure | 28.09 |
| Gas analysers, PLC controls and safety system | Purity checks, interlocks and gas detection | 28.09 |
| Methanol storage tanks and feed pumps | Holds about a month of methanol | 22.47 |
| DM water plant and cooling tower | Feed water and process cooling | 14.04 |
| Total plant and machinery | 280.88 | |
Costs are the sample report's estimates for an 8,000 Nm3 per day plant. Get current quotations before you finalise.
Utilities and manpower for the plant
A methanol cracker needs far less power than an electrolyser of the same output, because heat, not electricity, drives the reaction. Power and fuel are 7.3% of sales in our sample, ₹80.94 lakh in Year 3.
| Power | About 0.1–0.15 kWh per Nm3 for pumps, PSA valves and cooling (indicative); more if hydrogen is compressed for cylinders |
|---|---|
| Heating | Thermal oil heater fired on PSA off-gas, topped up with diesel, LPG or a little methanol at start-up |
| Demineralised water | About 0.3 kg per Nm3 of hydrogen as process feed (indicative) |
| Cooling water | About 20 litres per Nm3 circulated through a cooling tower (indicative) |
| Instrument air and nitrogen | Air for PSA valve actuators; nitrogen for purging before start-up and after shutdown |
| Manpower | 23 people in our sample, run in three shifts with trained operators on every shift |
Licences, PESO approvals and GST for the plant
Methanol is a flammable liquid and hydrogen a flammable compressed gas, so PESO approvals take the longest. Apply for them with the layout drawings, before the equipment order is final.
| Methanol storage | PESO licence under the Petroleum Rules 2002; methyl alcohol is on PESO's list of substances needing a storage licence |
|---|---|
| Hydrogen vessels | PESO licence under the SMPV(U) Rules 2016 to store compressed gas in buffer vessels or tube trailers |
| Cylinder filling | PESO licence under the Gas Cylinders Rules 2016, only if you fill hydrogen into cylinders |
| Pollution consent | Consent to establish and operate from the State Pollution Control Board; CPCB's 2025 list has no separate entry for this process, so the board decides the category |
| Factory and safety | Factory licence, fire NOC and an on-site emergency plan; check whether the hazardous chemical rules apply to your methanol stock |
| GST | Hydrogen (HSN 2804 10 00) and methanol (chapter 29) at 18% as of October 2026, so input tax on methanol offsets output tax |
Who buys hydrogen from a methanol cracker?
Buyers are plants that need a steady 50–1,000 Nm3 an hour and sit away from a gas pipeline. Float glass lines keep their tin bath under about 90% nitrogen and 10% hydrogen, and vanaspati makers need high-purity hydrogen for oil hydrogenation.
Most plants sit at or next to the buyer's site on a long-term supply contract. The business works more like a utility than a product sold through dealers.
- Vanaspati and edible oil hydrogenation units
- Float glass and specialty glass makers
- Stainless steel and copper strip annealing units
- Pharmaceutical and fine chemical hydrogenation units
- Electronics and powder metallurgy units
- Industrial gas distributors
Link the gas price to methanol: at about 0.55 kg of methanol per Nm3, every ₹10 per kg rise in methanol adds roughly ₹5.5 per Nm3 to cost (indicative). A contract with a methanol price clause protects the DSCR.
Mistakes that weaken a hydrogen gas from methanol cracking project report
- A fixed gas price with no methanol clause
Methanol is imported and its price can swing sharply in a few months; a fixed tariff can push a healthy DSCR below 1.
- Theoretical methanol use
Taking 0.48 kg per Nm3 ignores PSA recovery and catalyst ageing; real plants run nearer 0.5–0.55 kg, and the gap goes straight to margin.
- Selling 100% of capacity to one buyer at full load
Glass and oil plants have shutdowns and slack months; projections should use the buyer's real offtake, with a take-or-pay floor if possible.
- No catalyst and adsorbent replacement cost
The copper catalyst and PSA adsorbent wear out on a cycle of years; leaving them out overstates profit in Years 3 to 5.
- Leaving PESO approvals to the end
Tank farm distances and vessel licences shape the layout; late changes delay commissioning and the first loan instalment still falls due.
How NPCS helps you set up a methanol cracking hydrogen plant
- Capacity and purity sizingMatch Nm3 per hour, pressure and purity to your buyer's real demand and grade.
- Route and supplier comparisonCompare methanol cracking with electrolysis and cylinder supply, and line up reformer and PSA quotations.
- Bank-ready project reportProjections, DSCR and methanol price sensitivity in the format your lender expects.
- Layout and PESO approvals listTank farm, vessel and safety distances, plus the licences your state needs.
NPCS's client list includes an assignment for this product and 269 specialty chemicals assignments, built up since 1994 for entrepreneurs, companies and banks in India and abroad.
What's inside the hydrogen gas from methanol cracking sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
18 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS hydrogen gas from methanol cracking project reports
These are hydrogen gas from methanol cracking project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Hydrogen Gas from Methanol Cracking | 120000 Nos. Cylinder/Annum 6m3, 80000 Nos. Cylinder/Annum 9m3 | ₹12.02 crore | 45% | 44% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Hydrogen Gas from Methanol Cracking project report: frequently asked questions
What is the cost of a hydrogen gas from methanol cracking plant in India?
Our sample report models an 8,000 Nm3 per day plant at a total project cost of ₹588 lakh, with plant and machinery at ₹281 lakh. As an indicative guide, skid units of 50–100 Nm3 an hour cost about ₹1.5–3 crore in all, and 400–600 Nm3 an hour plants about ₹7–10 crore. Your report prices your capacity, purity and site.
How much methanol is needed to make 1 Nm3 of hydrogen?
Plants typically use about 0.5–0.55 kg of methanol and 0.3 kg of demineralised water for each Nm3 of hydrogen, as an indicative figure. The chemistry sets the floor: one mole of methanol plus one of water gives three moles of hydrogen, about 0.48 kg of methanol per Nm3. Catalyst age and PSA recovery decide how close a plant gets.
Is a methanol cracking hydrogen plant profitable?
In our illustrative sample, the plant earns ₹172 lakh net profit on ₹1,111 lakh sales in Year 3, a 29% return on investment, with break-even at about 32% of capacity. Real profit depends on the methanol price, how the supply contract passes it on, the buyer's offtake and power cost. A report should test all four.
What purity of hydrogen does methanol cracking give?
With a pressure swing adsorption (PSA) unit, a methanol cracker typically delivers 99.9–99.999% hydrogen, and some suppliers offer higher grades. The PSA beds remove carbon dioxide, carbon monoxide, methane and moisture. Buyers set the grade: edible oil hydrogenation commonly asks for at least 99.8%, while electronics and some chemical uses need 99.999% with very low carbon monoxide.
Is hydrogen from methanol cracking green hydrogen?
Not when the methanol is made from natural gas or coal. India's Green Hydrogen Standard, notified in August 2023, sets a limit of 2 kg CO2 equivalent per kg of hydrogen and covers electrolysis and biomass routes. Reforming methanol releases about 7.3 kg of CO2 per kg of hydrogen from the reaction alone, so the gas is sold as conventional hydrogen.
Which licences does a methanol cracking hydrogen plant need?
Beyond Udyam, GST, a factory licence and pollution consent, the plant needs PESO licences. Methanol storage falls under the Petroleum Rules 2002 and compressed hydrogen vessels under the SMPV(U) Rules 2016. Filling cylinders needs a licence under the Gas Cylinders Rules 2016. Hydrogen and methanol both attract 18% GST as of October 2026.
Is the hydrogen gas from methanol cracking project report PDF free, and can I use it for a loan?
The sample PDF is free to view and download. It shows the format and depth of an NPCS project report on hydrogen gas from methanol cracking, but its figures are illustrative and not from a real project. Do not submit it to a bank. For a term loan, NPCS prepares a report for your own capacity, buyer contract and location.
Sources and references
- Notification No. 9/2025-Integrated Tax (Rate), schedules of GST rates on goodsCentral Board of Indirect Taxes and Customs, checked Oct 2026
- Requirement of licence under Petroleum Rules, 2002 for storage of petroleumPetroleum and Explosives Safety Organisation, checked Oct 2026
- Static and Mobile Pressure Vessels (Unfired) Rules: frequently asked questionsPetroleum and Explosives Safety Organisation, checked Oct 2026
- Statutory rules and regulations for CNG stations (Gas Cylinders Rules, 2016)PESO, published by Petroleum and Natural Gas Regulatory Board, checked Oct 2026
- Government notifies Indian Green Hydrogen Standard under National Green Hydrogen MissionAll India Radio News, Prasar Bharati, checked Oct 2026
- A report on hydrogen production and demand in IndiaNational Institute of Solar Energy, MNRE, checked Oct 2026
- Revised categorisation of industries (Red, Orange, Green, White and Blue)Maharashtra Pollution Control Board, checked Oct 2026
