What is a ammonium chloride project report?
An ammonium chloride project report is a detailed project report (DPR) for a plant that reacts ammonia with hydrochloric acid and crystallises the salt for sale. It sets out the process route, equipment, raw material balance, market, project cost, means of finance, five-year projections, DSCR and break-even that a lender or investor reviews.
Chemical entrepreneurs, chlor-alkali companies with surplus acid and fertiliser or galvanising businesses use it to test the plant before they borrow or invest.
Also known as: ammonium chloride plant project report, DPR for ammonium chloride manufacturing, ammonium chloride business plan, naushadar project report.
Ammonium chloride manufacturing plant cost in India
Our sample report costs a 19 MT per day plant (metric tonnes per day) that runs 330 days a year, starting at 60% of capacity and reaching 80% by Year 5. Technical grade product is sold at ₹20,500 per MT ex-factory.
| Land and site development | 44.85 |
|---|---|
| Building and civil works | 112.25 |
| Plant and machinery | 259.53 |
| Other fixed assets | 39.76 |
| Contingencies | 18.59 |
| Preliminary and pre-operative | 11.87 |
| Working capital margin | 29.52 |
| Total | 516.37 |
| Promoter's contribution (25%) | 129.09 |
|---|---|
| Term loan from bank (75%) | 387.28 |
| Cash credit limit (separate) | 88.54 |
| Total project cost | 516.37 |
DSCR (debt service coverage ratio) is the cash available for the loan divided by the instalments due. Its lowest value in the sample is 1.26 in Year 2, when full principal repayments begin, so that is the year a lender will look at hardest.
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.
Ammonium chloride manufacturing process
A standalone plant usually makes ammonium chloride by direct neutralisation: ammonia reacts with hydrochloric acid, and the salt is recovered from the solution by evaporation and cooling. Most of the plant exists to remove water, not to run the reaction.
- Neutralisation
Ammonia vapour from the vaporiser is fed into acid in a rubber-lined reactor. The reaction gives off heat, so the reactor is cooled and the pH held close to neutral.
- Purification
By-product acid often carries iron and traces of other metals. The liquor is treated to drop them out and filtered, because iron turns the crystals off-white and fails battery and flux buyers.
- Evaporation
A multiple-effect evaporator uses steam to concentrate the liquor close to saturation. Reusing the vapour from one effect to heat the next cuts steam use per tonne.
- Crystallisation
Ammonium chloride is roughly twice as soluble near boiling as at room temperature, so cooling the hot liquor makes the crystals grow. Cooling rate sets the crystal size.
- Centrifuging
A pusher centrifuge separates the crystals. The mother liquor goes back to the evaporator, so very little product is lost.
- Drying and packing
A fluid bed dryer brings moisture below the grade limit at a moderate temperature. The crystals are sieved, treated with anti-caking agent if needed and packed in lined 50 kg HDPE bags.
Which process route suits a new ammonium chloride plant?
Three routes are used worldwide. The choice decides your raw material cost, your co-product and the scale at which the plant makes sense.
| Direct neutralisation | Ammonia plus hydrochloric acid. Simple chemistry, no co-product and moderate investment. Viable at 10–50 MT per day when cheap by-product acid is available. This is the route in our sample report. |
|---|---|
| Dual process with soda ash | A modified Solvay process that makes soda ash and ammonium chloride together. Only suits very large integrated soda ash plants, and it supplies much of the fertiliser grade sold in India. |
| Double decomposition | Ammonium sulphate reacts with common salt, giving ammonium chloride and sodium sulphate. Needs a market for both salts and careful separation, so it is used less often. |
Site the plant on the acid: a chlor-alkali plant often has surplus hydrochloric acid it must sell or neutralise. A unit next door with a long-term offtake contract gets acid cheaply and saves heavy freight on a material that is two-thirds water.
Raw materials for ammonium chloride
By the reaction balance, a tonne of ammonium chloride takes about 0.32 tonne of ammonia and 0.68 tonne of hydrogen chloride, which is 2.1–2.3 tonnes of 30–33% acid. In our sample report raw materials are 55.4% of sales in Year 3, and ammonia alone is 82% of that bill.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Anhydrous ammonia | 82% | 408.47 |
| Hydrochloric acid, 30–33% (by-product grade) | 14% | 69.74 |
| Purification chemicals and anti-caking agent | 4% | 19.93 |
| Total | 100% | 498.14 |
Ammonia follows international gas and ammonia prices, so a full report tests profit and DSCR against a rise in its price.
Machinery for an ammonium chloride plant
Chloride solutions attack ordinary steel, so wetted parts are rubber-lined, FRP, graphite or high-alloy. The evaporator and crystalliser is the largest single item in the sample.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Ammonia storage bullet with vaporiser | Stores liquid ammonia and feeds it as vapour | 31.14 |
| FRP acid storage tanks and pumps | Receive and meter hydrochloric acid | 18.17 |
| Rubber-lined neutralisation reactor with cooler | Runs the reaction and removes its heat | 33.74 |
| Multiple-effect evaporator and crystalliser | Removes water and grows the crystals | 72.67 |
| Pusher centrifuge | Separates crystals from mother liquor | 23.36 |
| Fluid bed dryer | Dries crystals to the grade's moisture limit | 28.55 |
| Steam boiler | Supplies steam to the evaporator and dryer | 25.95 |
| Ammonia and acid fume scrubber | Captures vapours before venting | 12.98 |
| Vibrating sieve and bagging machine | Screens and packs the product | 12.97 |
| Total plant and machinery | 259.53 | |
Costs are the sample report's estimates for a 19 MT per day plant. Get current quotations before you finalise.
Steam, power and staff for an ammonium chloride plant
Steam is the utility that matters most. With 30–33% acid, roughly 1.4–1.6 tonnes of water must be evaporated for every tonne of product, which is why evaporator design drives running cost.
| Power and fuel | ₹57.97 lakh in Year 3 in our sample, 6.4% of sales, covering boiler fuel and electricity |
|---|---|
| Steam | For the evaporator and dryer; more effects in the evaporator mean less fuel per tonne |
| Cooling water | For the reactor and crystalliser, with a cooling tower to recirculate it |
| Staff | 19 people in our sample, at a Year 1 cost of ₹43.50 lakh, run in shifts |
| Operating days | 330 days a year, with time kept for evaporator descaling and inspection |
Licences, standards and approvals
The ammonia store and the grade you sell decide most of the approvals, on top of the usual business and factory registrations.
| Business registration | Udyam (MSME) registration and GST registration |
|---|---|
| Pollution board consent | Consent to establish and operate from the State Pollution Control Board. The CPCB Red list includes basic chemicals and chlorine compounds, so expect Red category treatment and confirm with your board |
| Ammonia storage | PESO licence for storing compressed gas in pressure vessels under the SMPV(U) Rules, with periodic testing of vessels holding toxic gas |
| Technical and pure grades | BIS standard IS 1113:2024 is the usual quality reference for industrial buyers |
| Fertiliser grade | IS 1114:2024 and Schedule I of the Fertiliser (Control) Order, 1985: at least 25.0% ammoniacal nitrogen, moisture and other chlorides at 2.0% at most. Sale as fertiliser needs registration under the Order |
| Factory licence | Under the Factories Act and state rules, with an on-site safety plan for ammonia handling |
Who buys ammonium chloride in India?
Demand is spread across several industries, each with its own grade. Galvanisers and dry cell makers want high purity and low iron; tanneries and textile units accept technical grade; fertiliser users buy on nitrogen content and price.
- Hot-dip galvanising and wire galvanising units, as flux
- Dry cell battery makers, for electrolyte paste
- Leather tanneries, for deliming hides
- Textile dyeing and printing houses
- Fertiliser mixture makers and dealers
- Chemical traders supplying smaller users
Where a new plant competes: dual process soda ash plants supply much of the fertiliser grade at low cost. A new direct-route plant usually earns more by selling technical and pure grades to industrial buyers who pay for consistency.
Mistakes that weaken an ammonium chloride project report
- Assuming acid is free without a contract
By-product acid can be cheap, but its price and supply change when the chlor-alkali plant finds another buyer. Lenders want a written supply agreement behind the number.
- Under-sizing the evaporator and boiler
Water removal, not the reaction, limits output. A report that sizes steam for the reaction alone overstates capacity and understates fuel cost.
- Pricing stainless steel for chloride service
Common stainless grades crack and pit in hot chloride liquor. Equipment quotes must be for lined, FRP, graphite or suitable alloy construction.
- Using one price for every grade
Fertiliser grade sells well below technical and pure grades. Revenue should follow the actual mix you will sell, not the best price.
- Leaving out caking and storage losses
Crystals cake in humid storage, which hurts sales in the monsoon. Anti-caking agent, lined bags and covered storage belong in the cost.
How NPCS helps you plan an ammonium chloride plant
- Route and site selectionCompare direct neutralisation with other routes and test sites near acid sources.
- Material and steam balanceSize the reactor, evaporator and boiler for your capacity and acid strength.
- Bank-ready project reportProjections, DSCR and ammonia price sensitivity in the format your lender expects.
- Approvals checklistPESO, pollution consent and fertiliser registration steps for your state.
NPCS's published client list includes 269 assignments in specialty chemicals. The NPCS project team has prepared reports for chemical plants since 1994, for entrepreneurs, banks and companies in India and abroad.
What's inside the ammonium chloride sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
18 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS ammonium chloride project reports
These are ammonium chloride project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Ammonium Chloride (PURE GRADE) | 6.67 MT / Day | ₹1.81 crore | 49% | 32% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Ammonium Chloride project report: frequently asked questions
What is the cost of an ammonium chloride manufacturing plant in India?
Our sample report models a 19 MT per day plant at a total project cost of ₹516 lakh, including land, building, machinery and working capital margin. As an indicative guide, an 8–10 MT per day unit needs roughly ₹3–4 crore and a 35–50 MT per day plant about ₹7–10 crore. Your own report prices the plant for your capacity, site and equipment quotes.
What raw materials are needed to make ammonium chloride?
The direct route uses anhydrous ammonia and hydrochloric acid. By the reaction balance, each tonne of ammonium chloride needs about 0.32 tonne of ammonia and 2.1–2.3 tonnes of 30–33% acid. In our sample report ammonia is 82% of raw material cost and acid 14%, with purification chemicals and anti-caking agent making up the rest.
Is ammonium chloride manufacturing profitable?
In our illustrative sample, a 19 MT per day plant earns a 14% return on investment in Year 3 and breaks even at 43% of capacity. It pays back in about 4.5 years, with an average DSCR of 1.44. Margins are thin compared with many chemicals, so profit depends heavily on the ammonia price and on getting acid cheaply.
Which standards apply to ammonium chloride in India?
BIS has two standards. IS 1113:2024 covers the technical and pure grades sold to galvanisers, battery makers and other industries. IS 1114:2024 covers fertiliser grade, which needs at least 25.0% ammoniacal nitrogen, with moisture and other chlorides each at 2.0% at most. These match Schedule I of the Fertiliser (Control) Order.
What is ammonium chloride used for?
Ammonium chloride, also called sal ammoniac or naushadar, is used as a flux in hot-dip galvanising and soldering and as the electrolyte paste in zinc-carbon dry cells. Tanneries use it for deliming hides, and textile units as a dyeing auxiliary. Fertiliser grade supplies nitrogen, mainly for paddy. Each use asks for a different purity and crystal size.
What does a bank check in an ammonium chloride project report?
Lenders look at the average and lowest DSCR, the break-even level and how profit moves if the ammonia price rises. They also check that the acid supply is secured, usually through a contract with a nearby chlor-alkali plant. Corrosion-resistant equipment and PESO-licensed ammonia storage must be fully costed.
Is the ammonium chloride project report PDF free, and can I use it for a loan?
The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report. Its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and financing plan.
Sources and references
- IS 1113: Ammonium chloride, technical and pure (superseded by IS 1113:2024)Bureau of Indian Standards, checked Oct 2026
- IS 1114:2024 Ammonium chloride, fertilizer grade, specificationBureau of Indian Standards, checked Oct 2026
- Draft second revision of IS 1114, ammonium chloride, fertilizer gradeBureau of Indian Standards, checked Oct 2026
- Fertiliser (Control) Order, 1985Department of Agriculture, Government of Odisha, checked Oct 2026
- Frequently asked questions on the SMPV(U) RulesPetroleum and Explosives Safety Organisation, checked Oct 2026
- Categorization of industrial sectors under Red as per CPCB criteriaState Pollution Control Board, Odisha, checked Oct 2026
