Refractory industry in India at a glance
The refractory industry in India makes the heat-resistant bricks, castables and ramming masses that line furnaces, kilns and ladles. It produced 1,264.1 thousand tonnes in 2020-21 from 2,015 thousand tonnes of capacity, according to the Indian Bureau of Mines. Research firms value the market at USD 1,846.1 million to USD 2.58 billion.
Steel plants buy most of the output, so refractory makers, raw material suppliers, lenders and investors in furnace-based plants track it closely.
Also searched as: refractories market in India, refractory market size, refractory production in India, refractory manufacturers in India.
How big is the refractory market in India?
No government body publishes a rupee value for refractories. Two research firms do, for different base years, and their figures are far apart.
| Publisher and base year | Estimate | Forecast |
|---|---|---|
| Research firm A[10]2025, all forms, minerals and end uses; value basis not stated on the free page | USD 2.58 billionabout ₹24,570 crore | USD 3.5 billion by 2034CAGR 3.07% (2026 to 2034) |
| Research firm B[11]2024, all end uses; page shows no method or update date | USD 1,846.1 millionabout ₹17,580 crore | USD 2,293.7 million by 2029CAGR 4.44% (2024 to 2029) |
Estimates are published by independent research firms and rating agencies and are not NPCS figures. Rupee equivalents of USD figures use ₹95.25 per USD (6 Nov 2026) and are shown only for comparison.
Why the estimates differ: Research firm A puts the market at USD 2.58 billion for 2025, about 1.4 times Research firm B's USD 1,846.1 million for 2024. The base years differ by one year, and neither firm sets out its scope or price basis on its free page.
The forecasts also point to slow, steady growth. Research firm A expects USD 3.5 billion by 2034, and Research firm B projects USD 2,293.7 million by 2029.
Neither figure is a basis for sizing a plant on its own. Buyers order refractories by the tonne and by grade, so the official tonnage below is the better starting point.
How much refractory does India produce?
The Indian Bureau of Mines reports refractory output and capacity in its Indian Minerals Yearbook. Its table draws on the Indian Refractory Makers' Association.
| Measure | Period | Value |
|---|---|---|
| Refractory production, all types[1] | 2019-20 | 1,208.9 thousand tonnes |
| Refractory production, all types[1] | 2020-21 | 1,264.1 thousand tonnes |
| Installed refractory capacity, all types[1] | 2020-21 | 2,015 thousand tonnes a year |
Output rose from 1,208.9 thousand tonnes in 2019-20 to 1,264.1 thousand tonnes in 2020-21. Even so, plants used only about 62.7% of their 2,015 thousand tonnes of capacity.
That spare capacity shapes the case for a new unit. A newcomer wins orders on grade, delivery and service at the furnace, not by filling a shortage of tonnes.
These are the latest official figures and they end at 2020-21. Steel output has grown a great deal since then, so read them as a baseline rather than today's volume.
Which refractory products does India make?
The yearbook splits output into shaped bricks and unshaped monolithics. The split shows that castables and other mixes now lead.
- Monolithics and castables: The largest product group: 4,70,256 tonnes in 2020-21, about 37.2% of all refractories made in India.[1]
- High alumina bricks and shapes: 2,25,911 tonnes in 2020-21, used in blast furnaces, ladles, cement kilns and glass furnaces.[1]
- Fireclay bricks and shapes: 1,97,148 tonnes in 2020-21; the lower-cost alumina-silica bricks for general furnace and kiln lining.[1]
- Basic bricks and shapes: 1,73,386 tonnes in 2020-21; magnesia-based bricks for steel converters, ladles and cement kiln burning zones.[1]
- Steel plants as the main buyer: Steel production accounts for nearly 70% of refractory consumption in India, according to RHI Magnesita India.[6]
Monolithics are placed by casting, gunning or ramming instead of being laid brick by brick. Steel plants like them because a worn lining can be patched quickly between heats.
Each product rests on a different raw material chain. Basic bricks need magnesia, high alumina bricks need calcined bauxite or fused alumina, and fireclay bricks use domestic clay.
Key players in the refractory industry in India
A handful of large groups, most with foreign parents, lead the industry. Behind them are more than 100 units, of which around 14 are major and 33 are medium-sized.
| Company | What it does | Listed |
|---|---|---|
| RHI Magnesita India[6] | Calls itself the market leader; 512 thousand tonnes of installed capacity in 8 plants and revenue of ₹4,020 crore in 2025-26 | Yes |
| TRL Krosaki Refractories[9] | Second-largest maker in India, per ICRA; earns about 65% of revenue from steel companies; Krosaki Harima holds 77.62% | No |
| IFGL Refractories[8] | Flow control refractories for steel plants; plants at Kandla, Rourkela and Vizag; operating income ₹1,889.7 crore in 2025-26 | Yes |
| Vesuvius India[7] | Refractory maker with a new alumina-silica monolithic plant at Parwada; revenue from operations ₹2,09,995 lakh in the year to December 2025 | Yes |
| Calderys India[4] | Opened a 45-acre plant in Khordha district, Odisha, in April 2026, planned for six production lines | No |
TRL Krosaki is 77.62% held by Krosaki Harima, a Nippon Steel group company, and earns about 65% of its revenue from steel companies. IFGL specialises in flow control refractories for steel casting.
Company figures come from annual reports, exchange filings, a company press release and ICRA rating rationales. Financial years differ: Vesuvius India reports on a calendar year.
What drives refractory demand in India, and what holds it back?
Refractory demand follows steel. Furnaces, converters and ladles are relined on a cycle, and every new steel plant needs a full first lining.
What drives demand
- Crude steel output reached 170.15 million tonnes in 2025-26, and steel plants are the main refractory buyers[2][6]
- The National Steel Policy targets 300 million tonnes a year of crude steel capacity by 2030-31, against 220.4 million tonnes in 2025-26[2][3]
- ICRA expects domestic steel demand to grow 9–10% in FY2027, which feeds relining and new furnace orders[8]
- Large makers are adding capacity in India, including a new Calderys plant in Odisha and RHI Magnesita's 512 thousand tonnes base[4][6]
What holds it back
- Key raw materials for basic and high alumina refractories are largely imported from China, per ICRA[8][9]
- A fragmented industry of more than 100 units limits pricing power, and imported refractories compete on low duty[1][9]
- Output of 1,264.1 thousand tonnes in 2020-21 used about 62.7% of the 2,015 thousand tonnes of installed capacity[1]
The capacity gap is the long-term pull. Moving from 220.4 to 300 million tonnes a year of steel capacity means many new furnaces to line and then maintain.
Import dependence is the main risk. When Chinese raw material prices rise, or imported finished refractories undercut local makers, Indian margins come under pressure.
Where are refractory plants located in India?
Refractory plants tend to sit near their steel customers. The newest investment is going to the eastern coast.
- Odisha: New investment is gathering here: Calderys's Khordha plant, the MINPRO recycling venture and IFGL's Rourkela works, close to large steel plants.[4][5][8]
- Andhra Pradesh: IFGL makes refractories at Vizag, and Vesuvius India has a new monolithic plant at Parwada Industrial Area.[7][8]
- Gujarat: IFGL's Kandla plant serves steel makers in western India.[8]
For a new unit, a site near steel buyers cuts freight on heavy bricks and bagged mixes. It also makes on-site installation and relining service easier to offer.
Recent developments in the refractory industry
RHI Magnesita completed its joint venture with Khemka Refractories, MINPRO, for refractory recycling, headquartered in Odisha.[5]
Calderys inaugurated its plant at Bhuinpur in Khordha district, Odisha, planned for six production lines on 45 acres.[4]
Vesuvius India reported a new alumina-silica monolithic plant in Parwada Industrial Area and the closure of its older Visakhapatnam plant.[7]
RHI Magnesita India took 100% ownership of Ashwath Technologies.[6]
Is there room for a new refractory unit in India?
Three openings stand out from the data on this page. Monolithic mixes are the largest product group. Raw materials are largely imported. Recycling of spent linings is drawing investment from large makers.
Smaller units usually start with castables, ramming masses or fireclay shapes for foundries, sponge iron plants and induction furnaces, where order sizes suit a modest plant.
How NPCS helps with refractory projects
- Market research reportKey player profiles, financials, trade and demand-supply for refractories and their raw materials.
- Product and buyer studyMatch castables, bricks or ramming masses to steel, cement and foundry buyers in your region.
- Detailed project reportPlant cost, kilns and mixers, raw material sourcing and five-year projections for a refractory unit.
- Custom market surveyBuyer and supply research for a product, state or customer group.
NPCS has helped launch businesses across 40+ sectors since 1994, serving 150K+ clients in 85 countries with 150K successful projects delivered.
What the NPCS refractory market report covers
- Market overview and definition
- Market size and growth
- Growth drivers and industry trends
- Demand and supply situation
- Foreign trade: imports and exports
- Regulatory framework and recent changes
- Porter's five forces analysis
- SWOT analysis
- Key player profiles with financials
- Shareholding pattern, revenue mix and plant locations
This page summarises public data. The full report adds company profiles, financials and the demand-supply analysis.
Request the report contentsProject reports for this industry
Planning a plant rather than studying the market? These NPCS project reports cover plant cost, machinery and profitability, each with a free illustrative sample.
How this page was researched
Each figure on this page is taken from a source we opened on the date shown, and the source is numbered in the list below. Government data comes first. Company figures come from company filings and documents, or from rating-agency sector notes.
Market size estimates are published by research firms and rating agencies. They often disagree, because they define the market differently or use different base years. We show them side by side instead of choosing one. Rupee equivalents of US dollar figures use ₹95.25 per USD and are for comparison only.
NPCS does not add its own forecasts to this page. The page is reviewed every 6 months, or sooner when a major data release or policy change comes out.
Refractory industry in India: frequently asked questions
What is the size of the refractory market in India?
There is no official rupee value. One research firm estimates the market at USD 2.58 billion for 2025, and another puts it at USD 1,846.1 million for 2024. That is a gap of about 1.4 times. The two use different base years and do not explain their price basis, so treat both as rough guides.
How much refractory does India produce each year?
The latest official figure is 1,264.1 thousand tonnes for 2020-21, up from 1,208.9 thousand tonnes in 2019-20, according to the Indian Minerals Yearbook. Installed capacity was 2,015 thousand tonnes, so plants ran at about 62.7% of capacity. The yearbook carries no newer series, so current output is not officially known.
Which industry uses the most refractories in India?
Steel. Steel production accounts for nearly 70% of refractory consumption in India, according to the RHI Magnesita India annual report. Cement kilns, glass furnaces and non-ferrous metal plants take most of the rest. This is why refractory demand moves with steel output, which reached 170.15 million tonnes in 2025-26.
Who are the largest refractory companies in India?
RHI Magnesita India describes itself as the market leader, with 512 thousand tonnes of installed capacity in 8 manufacturing plants. ICRA ranks TRL Krosaki Refractories as the second-largest maker. IFGL Refractories, Vesuvius India and Calderys are other large players, and Calderys opened a new plant in Odisha in April 2026.
Does the Indian refractory industry depend on imports?
Partly. ICRA says the raw materials for basic and high alumina refractories are largely imported from China, and that IFGL imports a large portion of its raw materials from there. Imported finished refractories also compete on low duty. Recycling of spent linings, now being set up in Odisha, is one response.
What is the outlook for the refractory industry in India?
Published forecasts differ. One research firm expects USD 3.5 billion by 2034, growing 3.07% a year from 2026, while another projects USD 2,293.7 million by 2029, growing 4.44% a year. The firmer signal is steel: the National Steel Policy targets 300 million tonnes a year of capacity by 2030-31.
What does the NPCS refractory report add to this page?
This page sums up public data and published estimates. The NPCS report adds key player profiles with financials, demand and supply, imports and exports, the rules that apply, Porter's five forces and a SWOT analysis. It suits lenders, investors and companies planning a refractory, castable or raw material unit. Request the contents and price through the enquiry form.
Sources
- Indian Minerals Yearbook 2023, Mineral-based industries: RefractoriesIndian Bureau of Mines, Ministry of Mines, Official, checked Nov 2026
- An overview of steel sector (July 2026)Ministry of Steel, Official, checked Nov 2026
- India's Steel Sector Advances Towards Self-ReliancePress Information Bureau, Official, checked Nov 2026
- Calderys inaugurates Indian state-of-the-art facility in the presence of Odisha's Chief MinisterCalderys, Company filings, checked Nov 2026
- RHI Magnesita and Khemka Refractories launch MINPRO following completion of joint ventureRHI Magnesita, Company filings, checked Nov 2026
- RHI Magnesita India Ltd Annual Report 2025-26RHI Magnesita India Ltd (Annual Report 2025-26), Company filings, checked Nov 2026
- Vesuvius India Ltd: audited financial results for the year ended 31 December 2025Vesuvius India Ltd, Company filings, checked Nov 2026
- ICRA rating rationale: IFGL Refractories LimitedICRA, Industry bodies and rating agencies, checked Nov 2026
- ICRA rating rationale: TRL Krosaki Refractories LimitedICRA, Industry bodies and rating agencies, checked Nov 2026
- Published market estimate (Research firm A)Independent research firm, not named or linked, checked Nov 2026
- Published market estimate (Research firm B)Independent research firm, not named or linked, checked Nov 2026
Estimates from independent research firms are shown as Research firm A, B and so on, without the firm's name or a link.

