What is a viscose filament yarn project report?
A viscose filament yarn project report is a techno-economic study for a plant that turns dissolving wood pulp into continuous rayon filaments through the viscose route. It covers the spinning technology, chemicals, machinery, utilities, approvals, project cost, means of finance, five-year projections, DSCR and break-even.
Promoters and textile groups use it to size the plant and raise term loans; lenders and investors use it to judge whether the plant can repay.
Also known as: VFY project report, project report on viscose filament yarn, viscose filament yarn business plan, viscose rayon filament yarn feasibility study.
Viscose filament yarn plant cost and economics
Our sample report models a small integrated plant making 1,400 kg of yarn a day over 330 working days. It starts at 60% of capacity and reaches 80% in Year 5, selling at ₹408 per kg before GST.
| Land and site development | 85.69 |
|---|---|
| Building and civil works | 248.62 |
| Plant and machinery | 441.92 |
| Other fixed assets | 49.23 |
| Contingencies | 34.53 |
| Preliminary and pre-operative | 21.50 |
| Working capital margin | 52.28 |
| Total | 933.77 |
| Promoter's contribution (25%) | 233.44 |
|---|---|
| Term loan from bank (75%) | 700.33 |
| Cash credit limit (separate) | 156.86 |
| Total project cost | 933.77 |
Scale matters more than in most textile projects: commercial viscose filament plants run at thousands of tonnes a year and recover their carbon disulphide and spin-bath chemicals. Century Rayon's Shahad expansion from 25,000 to 30,000 tonnes a year was costed at ₹125 crore, using captive chemical plants. Treat this as an indicative brownfield figure; a new site costs more per tonne.
Term loan at 10.5% with a 6-month moratorium and 72 monthly instalments. All sample figures are illustrative.
Viscose filament yarn manufacturing process
The viscose route dissolves cellulose chemically and then regenerates it as filament. Most of the plant is a chemical plant; the spinning hall is only the last third.
- Steeping
Dissolving pulp sheets soak in caustic soda lye and are pressed, turning the cellulose into alkali cellulose.
- Shredding and ageing
The pressed sheets are shredded into crumbs and aged at controlled temperature and humidity until the viscosity is right.
- Xanthation
The crumbs react with carbon disulphide in closed churns to form orange cellulose xanthate.
- Dissolving and ripening
The xanthate dissolves in dilute caustic soda to make viscose, which is held to ripen before spinning.
- Filtration and de-aeration
Viscose is filtered in stages and de-aerated under vacuum, since a single particle or bubble breaks filaments at the spinneret.
- Spinning
Metering pumps push viscose through spinnerets into a bath of sulphuric acid, sodium sulphate and zinc sulphate, where the filaments set.
- Cake washing and drying
Yarn cakes are washed free of acid, desulphurised, bleached, given a finish oil and dried.
- Winding and grading
Dry yarn is wound onto cones, tested for denier, strength and evenness, and packed by grade.
Which spinning route should a VFY plant use?
The chemistry up to the viscose solution is the same for the first three routes. They differ in how the filament is collected and treated, which decides labour, floor space and yarn package.
| Pot (centrifugal) spinning | Filaments drop into a pot spinning at high speed, which inserts twist and builds a yarn cake. Cakes are washed and dried off the machine. Simple and proven, but cake handling is labour-heavy. |
|---|---|
| Continuous spinning | The yarn is washed, treated, dried and wound on one line, so it leaves the machine as a finished package. Less handling and more even yarn, at a higher machine cost per position. |
| Spool spinning | Yarn is wound onto perforated spools and washed on the spool before rewinding. Suits fine deniers and high-value yarn, with lower output per position. |
| Lyocell (solvent route) | Pulp is dissolved directly in N-methylmorpholine N-oxide and the solvent is recovered, so no carbon disulphide is used. A different plant with its own solvent recovery economics. |
Our sample report uses centrifugal pot spinning. A real feasibility study compares routes for your denier range and budget.
Raw materials and chemicals for viscose filament yarn
Dissolving wood pulp is the costliest input, and its price moves with the global pulp market. A public hearing summary for one Indian plant gives a guide to usage. Per tonne of yarn it implies about 1.05 tonnes of pulp, 0.65 tonnes of caustic soda, 0.31 tonnes of carbon disulphide and 1.1 tonnes of sulphuric acid.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Dissolving wood pulp | 58% | 318.04 |
| Caustic soda | 17% | 93.22 |
| Carbon disulphide | 13% | 71.29 |
| Sulphuric acid | 8% | 43.87 |
| Zinc sulphate and spin finish oil | 4% | 21.93 |
| Total | 100% | 548.35 |
Raw materials are 41.6% of sales in the sample. Consumption ratios are derived from the published annual totals for one plant and are indicative.
Machinery for a viscose filament yarn plant
The spinning machines are the largest single item, but the viscose preparation and recovery sections together cost more than spinning.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Steeping press and shredder | Makes alkali cellulose crumb from pulp | 44.19 |
| Xanthation churns and dissolvers | React crumb with CS2 and dissolve it | 66.29 |
| Ripening, filtration and de-aeration | Brings viscose to spinning quality | 53.03 |
| Centrifugal pot spinning machines | Extrude, set and twist the filament | 123.74 |
| Spin bath circulation and evaporation | Keeps acid bath strength and removes water | 53.03 |
| Cake washing, desulphurising and drying | Cleans and dries yarn cakes | 35.35 |
| Coning and winding machines | Rewinds yarn onto cones for sale | 35.35 |
| CS2 recovery and H2S scrubbing | Captures sulphur gases from the hall | 30.94 |
| Total plant and machinery | 441.92 | |
Costs are the sample report's estimates for a 1,400 kg per day plant. Spinnerets are a running item and need regular replacement; get current quotations before you finalise.
Water, power, steam and effluent
Utilities decide where a VFY plant can be built. The figures below are from the public hearing summary for Century Rayon's 30,000 tonnes a year site at Shahad and show the order of scale.
| Water | About 19,550 cubic metres a day after expansion, from the Ulhas river and recycled water |
|---|---|
| Power | About 26.6 MW, from the state grid and a captive co-generation plant |
| Steam | About 69 tonnes per hour, from coal-fired boilers with standby capacity |
| Effluent | Zinc-bearing effluent is treated in a clariflocculator at pH 9–11 to settle zinc before discharge |
| Air emissions | CS2 and H2S are drawn off by exhaust systems and released through a tall stack; the CS2 plant has H2S absorption and SO2 scrubbing |
| Hazardous waste | ETP sludge, spent catalyst and sulphur waste go to an authorised treatment and disposal facility |
The site figures include captive caustic, CS2 and acid plants. Our sample puts power and fuel at 6.2% of sales; a real report builds utilities from steam and power per kg.
Licences and rules for a viscose filament yarn plant
| Environmental clearance | Rayon fibre plants are Category A under item 5(d) of the EIA Notification 2006, so clearance is given by the central ministry after a public hearing |
|---|---|
| Pollution category | "Synthetic fibers including rayon" is a red category industry; consent to establish and operate comes from the State Pollution Control Board |
| Hazardous chemicals | Carbon disulphide is listed under the Hazardous Chemical Rules 1989, with a 20-tonne threshold for safety reports and a 200-tonne threshold for site emergency plans |
| GST | Man-made yarn moved from 12% to 5% GST in the September 2025 revision; confirm the rate for your HSN code with your tax adviser |
| BIS standard | No Quality Control Order for VFY found as of October 2026; the 2024 draft order covers viscose spun yarn (IS 3566:2023), not filament |
| Factory and safety | Factory licence, fire NOC and boiler registration under state rules, with gas monitoring in the spinning hall |
Rules change. Confirm current requirements with the ministry, the state board and your tax adviser before applying.
Market for viscose filament yarn in India
VFY is bought for its shine, drape and comfort in sarees, georgettes, crepes, chiffons and ethnic dress materials. Surat is the main weaving and trading centre, and embroidery thread makers are the second big outlet.
Buyers judge a supplier on even denier, uniform dyeing and quick delivery, because a few faulty cones can spoil a full warp.
- Powerloom weavers in Surat and other clusters
- Yarn traders and twisting units
- Embroidery thread manufacturers
- Saree and dress material makers
- Lace and narrow fabric units
Price against imports: Indian authorities have run anti-dumping cases on VFY from China since 2005, with the latest final findings published in October 2023. Price your yarn against the landed cost of imports, and check DGTR for any duty in force when you plan.
Mistakes that weaken a viscose filament yarn project report
- Costing it like a spinning mill
A VFY plant is mostly a chemical plant. Leaving out CS2 recovery, acid evaporation or effluent treatment makes the capital cost look far lower than it is.
- One price for every denier
Fine deniers fetch more per kg but give less output per spinning position. Revenue must follow the planned denier and dyed-yarn mix.
- Utilities taken as a ratio
Steam for evaporation, chilled water and power for the spinning hall should be worked out per kg of yarn and priced at your site.
- No time allowed for clearance
Category A clearance needs studies and a public hearing. The implementation schedule and pre-operative interest must allow for it.
- Ignoring import parity
Weavers compare your price with Chinese yarn. A report that does not test lower selling prices overstates the DSCR.
How NPCS helps you plan a viscose filament yarn plant
- Scale and technologyCompare pot, continuous and spool spinning for your denier range and budget.
- Chemicals and recoveryDecide what to buy and what to make or recover: CS2, acid and spin-bath salts.
- Lender-ready feasibility reportProjections, DSCR, sensitivity to pulp and import prices, and working capital.
- Clearances and siteWater, power and effluent checks for the site, and the EC and consent roadmap.
NPCS's published client list records 22 textile assignments, including a 2024 project report on viscose filament yarn spinning by the spool process.
What's inside the viscose filament yarn sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
19 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS viscose filament yarn project reports
These are viscose filament yarn project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Viscose Filament Yarn Spinning by Continuous Process | Viscose Filament Yarn - 30D: 2 MT Per Day Viscose Filament Yarn - 40D: 2 MT Per Day Viscose Filament Yarn - 50D: 11 MT Per Day Viscose Filam… | ₹0.5 lakh | 27% | 41% | Get this report |
| Viscose Filament Yarn | 3 ton/Day | ₹2.1 crore | 39% | 48% | Get this report |
| Viscose Filament Yarn Spinning by Centrifugal Process | Viscose Filament Yarn - 30D: 2 MT Per Day Viscose Filament Yarn - 40D: 2 MT Per Day Viscose Filament Yarn - 50D: 11 MT Per Day Viscose Filam… | ₹463 crore | 32% | 38% | Get this report |
| Viscose Filament Yarn Spinning by Spool Process | Viscose Filament Yarn - 30D: 2 MT Per Day, - Viscose Filament Yarn - 40D: 2 MT Per Day, Viscose Filament Yarn - 50D: 11 MT Per Day, Viscose … | ₹465 crore | 30% | 39% | Get this report |
| Viscose Filament Yarn Spinning by Lyocell Process | Viscose Filament Yarn - 30D: 2.0 MT per Day Viscose Filament Yarn - 40D: 2.0 MT per Day Viscose Filament Yarn - 50D: 11.0 MT per Day Viscose… | ₹480 crore | 44% | 31% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Viscose Filament Yarn project report: frequently asked questions
What is the viscose filament yarn manufacturing plant cost in India?
It depends heavily on scale and on whether you make your own carbon disulphide and sulphuric acid. Our illustrative sample models a 1,400 kg per day plant at ₹933.77 lakh. Commercial plants run at thousands of tonnes a year: one Maharashtra plant costed a 5,000 tonnes a year expansion at ₹125 crore. Your project report works out the cost for your capacity and site.
What raw materials are used to make viscose filament yarn?
Dissolving wood pulp is the main input, with caustic soda, carbon disulphide, sulphuric acid and zinc sulphate as process chemicals. In our sample report pulp makes up 58% of raw material cost. A public hearing summary for one Indian plant implies roughly 1.05 tonnes of pulp and 0.31 tonnes of carbon disulphide per tonne of yarn.
What is the difference between pot spun and continuous spun viscose yarn?
Pot spun yarn is collected as a cake in a fast-spinning pot that inserts twist, then washed and dried off the machine. Continuous spun yarn is washed, treated, dried and wound on one line. The pot route is simpler to start; the continuous route needs less handling and labour per kg but more capital per position.
Is viscose filament yarn the same as viscose spun yarn?
No. Filament yarn is spun as long continuous filaments straight from viscose solution, which gives the shine and drape used in georgettes and crepes. Spun yarn is made by cutting viscose into staple fibre and spinning it like cotton. They come from different plants, carry different rules and are sold to different weavers.
Which approvals does a viscose filament yarn plant need?
Rayon fibre plants are Category A projects under the EIA Notification 2006, so they need environmental clearance from the central ministry. Synthetic fibres including rayon are in the red pollution category. Carbon disulphide storage falls under the Hazardous Chemical Rules. You also need factory, fire and power approvals for your state.
Is a viscose filament yarn plant profitable?
In our illustrative sample, the plant reaches a 23% return on investment in Year 3, with break-even at about 39% of capacity and payback in about 3.5 years. Real profit depends on pulp prices, chemical recovery, steam cost, the denier mix you sell and how Chinese import prices move.
Is the viscose filament yarn project report PDF free, and can I use it for a loan?
The sample PDF is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report. Its figures are representative and not from a real project, so do not give it to a bank. For finance, NPCS prepares a report for your own capacity, technology and site.
Sources and references
- Executive summary of the EIA report for VFY capacity expansion, Century Rayon, ShahadMaharashtra Pollution Control Board, checked Oct 2026
- List of red category industriesPunjab Pollution Control Board, checked Oct 2026
- The Manufacture, Storage and Import of Hazardous Chemical Rules, 1989Punjab Pollution Control Board, checked Oct 2026
- Threads of Reform: GST reforms in textiles, apparel and logisticsPress Information Bureau, Government of India, checked Oct 2026
- Draft Viscose Rayon Cut Staple Spun Yarn (Quality Control) Order, 2024Ministry of Textiles, Government of India, checked Oct 2026
- Anti-dumping case: Viscose Filament Yarn from China PR and UkraineDirectorate General of Trade Remedies, checked Oct 2026
- Anti-dumping investigation: Viscose Rayon Filament Yarn from China PRDirectorate General of Trade Remedies, checked Oct 2026
