What is a rubber based adhesive project report?
A rubber based adhesive project report is a detailed project report (DPR) for a unit that dissolves polychloroprene, SBR or natural rubber with tackifier resins in solvent to make contact adhesive. It sets out the process, machinery, solvent safety, raw materials, market, project cost, means of finance, five-year projections, DSCR and break-even that a lender reviews.
Entrepreneurs use it to size the plant and apply for a term loan; banks use it to judge whether the unit can repay.
Also known as: rubber adhesive manufacturing project report, SR adhesive project report, neoprene adhesive DPR, rubber based adhesive business plan.
What a bank checks in a rubber based adhesive project report
Lenders read a project report on rubber based adhesive closely, because the product is mostly solvent by weight and input costs swing with crude oil. These are the values in our sample report and why each one is tested.
Rubber, resin and solvent take more than half of every rupee of sales. A report showing a much lower share is usually pricing raw materials too low.
Toluene and hexane prices follow crude oil. The report should test a rise in solvent price, because it moves profit more than any other input.
The debt service coverage ratio (cash available against loan payments due) is read for the weakest year, not only the average. Year 1, at 60% capacity, is usually the tightest.
Footwear and furniture makers expect credit. Debtor days and 30 days of raw material stock set the cash credit limit.
Values are the assumptions in our illustrative sample. Your report uses figures for your capacity, suppliers and market.
Rubber based adhesive manufacturing plant cost in India
The biggest cost driver is whether you masticate and compound your own rubber or dissolve bought-in compound. The large tier below is the unit in our sample report; the smaller tiers are indicative ranges.
Small dissolving unit
₹25–60 lakh
About 200–500 kg per day, 1–2 churn mixers
- Machinery and solvent tanks₹12–25 lakh
- Shed and fit-out (or rent)₹8–20 lakh
- Working capital margin₹4–10 lakh
Fits PMEGP, subject to limits
Mid-size unit
₹80–180 lakh
About 600–1,200 kg per day, own mixing mill
- Machinery₹45–100 lakh
- Land and building₹25–60 lakh
- Working capital margin₹8–18 lakh
MSME term loan
Large unit
₹299 lakh
1,600 kg per day, 5,28,000 kg per year
- Plant and machinery₹154 lakh
- Land and building₹90 lakh
- Working capital margin₹23 lakh
Term loan ₹224 lakh (75%), promoter ₹75 lakh
Small and mid-size ranges are indicative and exclude land unless stated. Flameproof equipment and solvent storage add more to cost than in a water-based glue unit.
Rubber based adhesive plant economics
The sample report models a 1,600 kg per day unit running 330 days a year, starting at 60% capacity and reaching 80% in Year 5. Selling price is taken at ₹181 per kg ex-factory, against a cost of about ₹164 per kg.
| Land and site development | 20.12 |
|---|---|
| Building and civil works | 69.38 |
| Plant and machinery | 153.73 |
| Other fixed assets | 15.11 |
| Contingencies | 11.16 |
| Preliminary and pre-operative | 6.74 |
| Working capital margin | 22.68 |
| Total | 298.92 |
| Promoter's contribution (25%) | 74.73 |
|---|---|
| Term loan from bank (75%) | 224.19 |
| Cash credit limit (separate) | 68.03 |
| Total project cost | 298.92 |
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.
Rubber based adhesive manufacturing process
Contact adhesive is a batch process carried out in closed, flameproof equipment. The rubber is prepared on a mill first, then dissolved and blended in solvent.
- Mastication
Polychloroprene or SBR is worked on a two-roll mill to break down its chains, so it dissolves faster and gives a workable viscosity.
- Compounding
Magnesium oxide, zinc oxide and an antioxidant are milled in, and the sheet is cut into small chips.
- Resin pre-reaction
Phenolic resin is reacted with magnesium oxide in solvent; this step gives the bond its heat resistance in shoes and car interiors.
- Dissolution
Chips are churned into the solvent blend for several hours in closed mixers until no undissolved rubber remains.
- Blending and adjustment
The resin solution is added and solids and viscosity are brought to the grade, for example a brushable grade or a thicker spreading grade.
- Filtration and testing
The batch is filtered and checked for viscosity, solids content and peel strength on test strips.
- Filling
Adhesive is filled into tubes, tins and drums and sealed at once to stop solvent loss and thickening.
Raw materials for rubber based adhesive
Solvent is the largest raw material by cost, ahead of the rubber itself. Rubber grade decides the product: polychloroprene for high-strength footwear and furniture grades, SBR and natural rubber for cheaper general-purpose grades.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Solvent blend (toluene, hexane and acetone) | 45% | 170.81 |
| Polychloroprene and SBR rubber | 32% | 121.46 |
| Tackifying phenolic and hydrocarbon resins | 15% | 56.94 |
| Magnesium oxide, zinc oxide and antioxidants | 8% | 30.37 |
| Total | 100% | 379.58 |
Year 3 cost at 70% capacity in our illustrative sample. Packing tins and drums are counted separately.
Machinery for a rubber adhesive unit
Because the solvents are highly flammable, motors, panels and lights in the mixing and filling area must be flameproof. In the sample, the churn mixers and dissolvers are the largest machinery item.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Two-roll rubber mixing mill | Masticates and compounds the rubber | 23.06 |
| Flameproof churn mixers and dissolvers | Dissolve rubber chips in solvent | 38.43 |
| Resin pre-reaction vessel | Reacts resin with magnesium oxide | 15.37 |
| Solvent storage tanks with flameproof pumps | Store and transfer solvents safely | 23.06 |
| Filtration unit | Removes gel particles and dirt | 7.69 |
| Tin and drum filling machine | Fills and seals packs by weight | 18.45 |
| Quality control lab | Viscosity and peel strength tests | 7.69 |
| Ventilation, fire protection and flameproof electricals | Keep vapour below risk levels | 19.98 |
| Total plant and machinery | 153.73 | |
Costs are the sample report's estimates for a 1,600 kg per day unit. Get current quotations before you finalise.
Who buys rubber based adhesive?
Footwear is the anchor market. Shoe and chappal makers use synthetic rubber contact adhesive to bond soles, insoles and uppers, and they buy in 5 to 30 litre drums. Furniture makers and laminate fixers, foam and upholstery shops, and automobile trim suppliers form the second large group.
Retail tins sold through hardware and paint dealers give steady volume but need a brand and dealer credit. Industrial buyers care more about bond strength, tack time and the same viscosity in every batch.
- Footwear and chappal manufacturers
- Furniture makers and laminate fixers
- Foam, mattress and upholstery units
- Automobile trim and rubber parts makers
- Leather goods and bag makers
- Tyre retreaders and conveyor belt repairers
Where a new unit wins: footwear clusters are concentrated in a few towns. A unit close to one can supply grades matched to each factory's soles and materials, and deliver drums at short notice.
Licences and standards for a rubber adhesive unit
Solvent storage is the approval that shapes the plant layout, so plan it before you buy land or a shed.
| Business registration | Udyam (MSME) registration and GST registration |
|---|---|
| Solvent storage | Toluene and hexane are on PESO's list of petroleum needing a licence. Class A petroleum (flash point below 23°C) is exempt only below 30 litres; 30 to 300 litres is licensed by the district authority, larger stocks by PESO |
| Pollution board consent | Consent to establish and operate from the State Pollution Control Board. Adhesive making is not named separately in the CPCB category lists, so confirm the category with your state board |
| Fire safety | Fire NOC from the state fire service, with flameproof wiring and solvent area separation |
| Factory licence | Under the Factories Act where worker and power thresholds apply; rules vary by state |
| Product standards | IS 4663 covers permanent rubber-based adhesives for footwear; IS 2560 and IS 2562 cover rubber-based adhesives for tyres and tubes (both reaffirmed in March 2024) |
Checked against PESO, BIS and state pollution board documents in October 2026. Limits and categories change, so confirm with the authorities.
Mistakes that weaken a rubber adhesive project report
- No allowance for solvent loss
Some solvent evaporates during dissolving, filtering and filling. Output must be worked out after that loss, or sales and margins come out too high.
- Pricing on retail tin rates
Footwear factories buy drums at ex-factory prices well below retail tins. Using shop prices for sales overstates revenue and DSCR.
- Layout that ignores the storage licence
Solvent stores need distance from the boundary and other buildings. A shed chosen before this check may never get a licence.
- One grade for every buyer
Shoe soles, laminates and foam need different tack times and heat resistance. A report with a single product grade misreads the market.
How NPCS helps you set up a rubber based adhesive unit
- Grades and capacityChoose footwear, furniture or general grades and a daily output to suit your buyers.
- Machinery and safetyCompare mills, mixers and flameproof equipment and get quotations.
- Bank-ready project reportProjections, DSCR and working capital in the format your lender wants.
- Approvals and layoutSolvent store layout, PESO and pollution consent steps for your state.
NPCS's client list includes 40 assignments for rubber product units, one of them for rubber based adhesive, prepared by the NPCS project team led by founder Ajay Kumar Gupta.
What's inside the rubber based adhesive sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
18 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS rubber based adhesive project reports
These are rubber based adhesive project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Rubber Based Adhesive | 1500 MT/Annum | ₹92 lakh | 51% | 77% | Get this report |
| Rubber Based Adhesives | 270 MT/Annum | ₹1.42 crore | 43% | 44% | Get this report |
| Adhesives Neoprene Based Rubber Adhesive for Footwear, Polyurethane Based Adhesive for Footwear Epoxy Two… | 3 MT/day | ₹5.97 crore | 47% | 35% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Rubber Based Adhesive project report: frequently asked questions
What is the cost of a rubber based adhesive manufacturing plant in India?
A small unit that dissolves bought-in rubber needs roughly ₹25–60 lakh. A mid-size unit with its own mixing mill needs about ₹80–180 lakh, and a plant of about 1,500 kg per day close to ₹3 crore. Our sample report models a 1,600 kg per day unit at ₹298.92 lakh. These are indicative figures; your report works out the cost for your capacity and location.
Which raw materials are used to make rubber based adhesive?
The base is polychloroprene (neoprene), SBR or natural rubber, dissolved in a solvent blend such as toluene, hexane and acetone. Phenolic or hydrocarbon resins add tack and heat resistance, and magnesium oxide, zinc oxide and an antioxidant stabilise the mix. In our sample report solvents are 45% and rubber 32% of raw material cost.
Which machines are needed for rubber adhesive manufacturing?
You need a two-roll mill to masticate and compound the rubber, and flameproof churn mixers to dissolve it. Add a resin pre-reaction vessel, solvent tanks with flameproof pumps, a filter, and a tin and drum filling machine. A small laboratory with a viscometer and peel tester checks each batch. Ventilation, fire protection and flameproof wiring are part of the plant, not extras.
Is rubber based adhesive manufacturing profitable?
In our illustrative sample, a 1,600 kg per day unit earns a 16% return on investment in Year 3. It breaks even at 48% of capacity and pays back in about 4.3 years. Margins depend mostly on solvent and rubber prices, solvent loss in the plant, the grade mix you sell and how much credit buyers take.
Do I need a PESO licence to store solvents for adhesive making?
Usually yes. Toluene and hexane are listed petroleum products, and PESO guidance exempts only Class A petroleum below 30 litres. A working adhesive unit holds far more than that, so it needs a storage licence. Class A stocks of 30 to 300 litres are licensed by the district authority, and larger stocks by PESO.
Can I get a PMEGP loan for a rubber adhesive unit?
Yes, if the project cost is within the PMEGP limit of ₹50 lakh for manufacturing. The scheme gives a margin-money subsidy of 15% to 35% depending on category and area. That suits a small dissolving unit; a plant like our sample, at ₹298.92 lakh, would need an MSME term loan instead.
Is the rubber based adhesive project report PDF free, and can I use it for a loan?
The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report. Its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and loan scheme.
Sources and references
- Revised FAQs on Petroleum Rules, 2002Petroleum and Explosives Safety Organisation (PESO), checked Oct 2026
- List of petroleum products requiring a licencePetroleum and Explosives Safety Organisation (PESO), checked Oct 2026
- Indian Standards on adhesives (IS 4663 and others)Bureau of Indian Standards, checked Oct 2026
- IS 2560:1979 Rubber-based adhesives for tubes, non-curingBureau of Indian Standards, checked Oct 2026
- IS 2562:1979 Rubber-based adhesives for tyres and tubes, curingBureau of Indian Standards, checked Oct 2026
- Categorisation of industrial sectors under Orange categoryState Pollution Control Board, Odisha, checked Oct 2026
- Prime Minister's Employment Generation Programme (PMEGP)MSME Department, Government of Uttar Pradesh, checked Oct 2026
