WhatsApp us
Request a Quote

Project reports in Grain Milling

Cold Water Starch Manufacturing Project Report

Plant cost, drum dryer machinery, raw materials and five-year profitability for a cold water starch unit, with a free sample report you can open now.

Also known as: cold water soluble starch, pregelatinised starch, pregelatinized starch

Plant capacity
5 MT per day
Total project cost
₹238 lakh
Plant and machinery
₹95 lakh
Return on investment
21% (Year 3)
Break-even
40% of capacity
Payback period
About 3.7 years

Figures from our illustrative sample report for a typical unit. They show the format of an NPCS report and are not quotes for your project.

What is a cold water starch project report?

A cold water starch project report is a detailed project report (DPR) for a unit that drum-dries cooked maize or tapioca starch. The product swells in plain water without boiling. The report sets out the process, machinery, raw materials, market, project cost, means of finance, five-year projections, DSCR and break-even a lender needs.

Entrepreneurs use a project report on cold water starch to size the plant and apply for a term loan; banks use it to judge whether the unit can repay from its own cash flow.

Also known as: cold water soluble starch, pregelatinised starch, pregelatinized starch.

What a bank checks in a cold water starch project report

A cold water starch unit adds value to a starch it buys, so a lender looks hard at the spread between input and output. These are the values in our sample report and why each one matters.

66.3%Raw material share of sales

Two thirds of every rupee of sales goes on starch and chemicals. A report showing a much lower share is likely using an old starch price.

86%Maize starch share of raw material cost

Native maize starch tracks the maize crop. The report should test a 10% rise in its price, because no other cost moves profit as much.

30 daysRaw material stock held

Starch is bought in lots from a few wet-milling plants. Holding a month of stock, plus 20 days of credit to buyers, sets the cash credit limit.

1.53Lowest yearly DSCR

The debt service coverage ratio (cash available for each rupee of loan repayment) dips in the heaviest repayment year. Banks usually look for comfort above 1.25.

Values are the assumptions and results in our illustrative sample. Your report uses figures for your capacity, suppliers and market.

Cold water starch manufacturing plant cost in India

Cost depends mainly on drum dryer size and whether you own the land and building. The middle tier is the unit in our sample report; the other two are indicative ranges.

Small unit

₹50–110 lakh

About 1–2 MT per day, one drum dryer

  • Machinery₹30–55 lakh
  • Shed fit-out (or rent)₹8–20 lakh
  • Working capital margin₹5–12 lakh

PMEGP only if kept within ₹50 lakh

Our sample report

Mid-size unit

₹238 lakh

5 MT per day, 1,500 MT per year

  • Plant and machinery₹95 lakh
  • Land and building₹98.17 lakh
  • Working capital margin₹16.24 lakh

Term loan ₹178 lakh (75%), promoter ₹59 lakh

Larger unit

₹4–7 crore

About 10–15 MT per day, two or more dryers

  • Machinery₹1.8–3 crore
  • Land and building₹1.5–3 crore
  • Working capital margin₹30–60 lakh

MSME term loan, often with CGTMSE cover

Small and larger ranges are indicative. Costs vary with location, boiler fuel, dryer make and how much of the line is automated.

Cold water starch plant economics in our sample

The sample models a 5 MT per day unit working 300 days a year, starting at 60% of capacity and reaching 80% in Year 5. Cold water starch is sold at ₹63,300 per MT, ex-GST.

₹238 lakhTotal project cost
₹665 lakhSales in Year 3
₹50 lakhNet profit in Year 3
1.76Average DSCR
Cost of project (₹ lakh)
Land and site development17.67
Building and civil works80.50
Plant and machinery95.01
Other fixed assets14.09
Contingencies8.78
Preliminary and pre-operative5.40
Working capital margin16.24
Total237.69
Means of finance (₹ lakh)
Promoter's contribution (25%)59.42
Term loan from bank (75%)178.27
Cash credit limit (separate)48.73
Total project cost237.69

Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.

Cold water starch manufacturing process

Most Indian units make cold water starch by drum drying, which pre-cooks native starch and dries it in a single pass. The whole conversion takes only seconds on the drum, so control of steam pressure and film thickness decides quality.

  1. Slurry preparation

    Native starch is mixed with softened water, and any modifying chemicals, in agitated tanks to a fixed solids level. Hard water leaves salts that dull the finish on cloth.

  2. Cooking and drum drying

    The slurry runs between steam heated rotating drums, where it gelatinises and dries to a thin sheet before one revolution is complete.

  3. Flaking and milling

    Doctor blades scrape the sheet off the drum; it breaks into flakes and is ground in a hammer mill.

  4. Sieving

    A vibro sifter grades the powder to the mesh the buyer wants. Coarse powder disperses better without lumps, fine powder thickens faster.

  5. Blending and testing

    Batches are blended for even viscosity and tested for moisture, cold water solubility and paste strength before release.

  6. Packing

    The powder is packed in poly-lined HDPE bags of 25–50 kg, or in pouches for laundry retail, and stored dry because it picks up moisture.

Another route exists: granular cold water starch is made by heating starch in an alcohol and water mix under pressure, then recovering the alcohol. It keeps the granule shape for food uses, but needs solvent handling and a much larger investment.

Raw materials for cold water starch

Native maize starch is bought in 50 kg bags from maize wet-milling plants. Tapioca starch, much of it from units around Salem in Tamil Nadu, is blended in where a clearer, softer paste is wanted.

Raw material cost in Year 3 of our sample report
Raw materialShare of costYear 3 (₹ lakh)
Native maize starch86%378.85
Tapioca starch9%39.65
Processing chemicals and additives5%22.02
Total100%440.52

Machinery for a cold water starch unit

The drum dryer and the boiler that feeds it take half of the machinery budget in our sample. Ask suppliers for drum surface finish, drum diameter and steam pressure rating, since these set output per hour.

MachineWhat it doesSample cost (₹ lakh)
Steam heated double drum dryerCooks and dries the slurry in one pass30.41
Steam boiler with water softenerSupplies steam to the drums17.10
Flaker and hammer millBreaks and grinds the dried sheet9.50
Slurry tanks with agitatorsMix starch, water and chemicals7.60
Electrical panel and instrumentsControls drives, temperature and pressure7.60
Vibro sifterGrades powder by mesh size5.70
Ribbon blenderEvens out batches before packing5.70
Bag filling and stitching machineWeighs and closes bags5.70
Dust collector and cycloneCaptures starch dust at the mill and sifter5.70
Total plant and machinery95.01

Costs are the sample report's estimates for a 5 MT per day line. Get current quotations before you finalise.

Who buys cold water starch in India?

The steadiest demand comes from people who stiffen cloth every day and do not want to boil starch: commercial laundries, dhobi ghats, dry cleaners and hotel linen services. Textile processors use it to thicken print paste and finish fabric, and paper and adhesive makers use it where a cold-mixed paste saves heating.

  • Commercial laundries, dry cleaners and hotel linen services
  • Textile processors, finishers and printing units
  • Paper and board mills for surface sizing
  • Wallpaper paste and label adhesive makers
  • Distributors of laundry products to retail shops

Where a new unit wins: bulk industrial buyers judge on consistent viscosity and low moisture, while laundry users buy small packs at several times the bulk price. A unit that sells part of its output in branded retail packs earns a better average price.

Licences and approvals for a cold water starch unit

Business registrationUdyam (MSME) registration and GST registration
Pollution board consentConsent to establish and operate from the State Pollution Control Board. Odisha's list under CPCB criteria places starch manufacturing in the Orange category; confirm how your state classifies drum drying of bought-in starch
Steam boilerRegistration and periodic inspection by the state boiler inspectorate for a boiler covered by boiler law
Food grade outputFSSAI registration or licence, only if you sell a food grade product; the tier depends on turnover and daily capacity
Retail packsLegal Metrology registration as a packer for laundry starch sold in consumer packs
Factory and fireFactory licence where worker and power thresholds apply, and a fire NOC where the state requires it

Mistakes that weaken a cold water starch project report

  • Pricing all output at retail pack rates

    Laundry pouches sell at a premium, but most tonnage goes in 25–50 kg bags at bulk rates. Revenue should reflect the real bag and pack mix.

  • Under-costing boiler fuel

    Drum drying evaporates most of the slurry water with steam. Our sample uses a ratio for power and fuel; your report should price steam from actual fuel quotes.

  • One grade for every buyer

    Laundry, print paste and paper sizing need different viscosity and mesh. A report that assumes one grade misses testing cost and rework.

  • Ignoring moisture pick-up

    Cold water starch absorbs moisture and cakes in poor bags or damp stores, and buyers reject lumpy lots. Lined bags and dry storage belong in the costs.

  • Relying on one starch supplier

    Native starch prices move with the maize crop. Two or more supplier quotes make the raw material cost more believable to a lender.

How NPCS helps you set up a cold water starch unit

  • Grade and capacity planPick laundry, textile or food grades and a daily output that suits your buyers and budget.
  • Dryer and boiler selectionCompare drum dryer sizes, boiler fuels and supplier quotations.
  • Bank-ready project reportProjections, DSCR and working capital in the format your lender expects.
  • Approvals and layoutPlant layout, steam and power load, and the approvals list for your state.

NPCS's client list includes 58 grain milling assignments, among them maize starch and potato starch projects, prepared by the NPCS project team led by founder Ajay Kumar Gupta.

What's inside the cold water starch sample report

  1. Introduction
  2. Uses and applications
  3. Market potential
  4. Manufacturing process
  5. Raw materials
  6. Plant and machinery
  7. Land, building and utilities
  8. Manpower
  9. Licences and approvals
  10. Project cost and means of finance
  11. Working capital
  12. Projected profitability
  13. Cash flow statement
  14. Projected balance sheet
  15. Depreciation
  16. Term loan repayment
  17. Debt service coverage
  18. Break-even analysis
  19. Financial ratios
  20. Key assumptions
  21. Conclusion
  22. Monthly loan repayment schedule

18 pages, five-year projections, illustrative figures.

Open sample report

Free sample or a report for your project?

What you getFree sampleNPCS report for your project
Capacity and locationTypical unitYour capacity, site and state
FiguresIllustrativeBuilt on current prices and quotations
Machinery suppliers and quotationsNoYes
Market survey for your regionNoYes
Bank or scheme format (PMEGP, term loan)NoYes
Use for a loan applicationNoYes

Real NPCS cold water starch project reports

These are cold water starch project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.

Project reportPlant capacityTotal investmentRate of returnBreak-evenAction
Cold Water Soluble Starch48 MT/Day₹5.05 crore27%70% Get this report

Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.

Find other projects that fit your budget Search NPCS project profiles by investment, return and break-even, the same search as our Startup Selector.

What clients say about NPCS

4.7

264 Google reviews, as of 20 Oct 2026

Clients most often mention

  • feasibility reports 18
  • project report 16
  • helpful for startups 15
  • detailed reports 8
Read all reviews on Google
  • Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.

    Piyush Singh, Google review, 2026

  • Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended

    Saroj Yadav, Google review, 2026 View on Google

  • In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.

    Shrishti Gautam, Google review, 2026

  • NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.

    Raj Yadav, Google review, 2026

Cold Water Starch project report: frequently asked questions

What is cold water starch and how is it different from ordinary starch?

Cold water starch is starch that has already been cooked and dried, so it swells and thickens in plain water at room temperature. Ordinary native starch must be boiled before it gives any stiffness or paste. That is why laundries, textile finishers and adhesive makers pay more for it: it saves fuel, time and the risk of lumps from uneven cooking.

How much does it cost to start a cold water starch manufacturing plant in India?

A small 1–2 MT per day unit with one drum dryer needs roughly ₹50–110 lakh, and a 10–15 MT per day plant about ₹4–7 crore. Our sample report models a 5 MT per day unit at ₹237.69 lakh including land, building and working capital margin. The smaller and larger ranges are indicative; your report costs your own capacity and site.

What raw material is used to make cold water starch?

Native maize starch is the main input. In our sample report it is 86% of raw material cost, with tapioca starch at 9% and processing chemicals and additives at 5%. Most small units buy starch from maize or tapioca wet-milling plants rather than milling grain, so starch price and supplier spread decide much of the margin.

Which machine is used to make cold water starch?

The core machine is a steam heated drum dryer, which cooks and dries the starch slurry in one pass. Around it you need slurry tanks, a steam boiler with water softener, a flaker and hammer mill, a vibro sifter, a blender, a bagging machine and a dust collector. In our sample the drum dryer is the largest single machine cost.

Is cold water starch manufacturing profitable?

In our illustrative sample, a 5 MT per day unit earns a 21% return on investment in Year 3. It breaks even at about 40% of capacity and pays back in about 3.7 years. Real profit depends on the gap between native starch cost and your selling price, boiler fuel cost, rejection rates and how much you sell in higher-priced retail packs.

Can I get a PMEGP loan for a cold water starch unit?

Yes, if the project cost stays within the PMEGP limit of ₹50 lakh for manufacturing. The scheme gives a margin money subsidy of 15–35% depending on category and area. A unit of the size in our sample is above that limit, so it would usually go for an MSME term loan, often with CGTMSE guarantee cover.

Is the cold water starch project report PDF free, and can I use it for a bank loan?

The sample PDF is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report. Its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and scheme.

Sources and references

  1. Prime Minister's Employment Generation Programme (PMEGP)Vikaspedia, Government of India, checked Oct 2026
  2. Prime Minister Employment Generation ProgrammeBank of India, checked Oct 2026
  3. Credit Guarantee Fund Trust for Micro and Small EnterprisesCGTMSE, checked Oct 2026
  4. Categorization of industrial sectors under Orange as per CPCB criteriaState Pollution Control Board, Odisha, checked Oct 2026
  5. FSSAI licence and registration tiers (PMFME training material)NIFTEM, Ministry of Food Processing Industries, checked Oct 2026
Ajay Kumar Gupta, founder of NPCS

Who prepares NPCS reports

The NPCS project team, led by Ajay Kumar Gupta

This page and its sample report are prepared and reviewed by the NPCS project team, which has written techno-economic feasibility studies and detailed project reports since 1994.

Ajay Kumar Gupta founded Niir Project Consultancy Services (NPCS) and leads the organisation. With 40 years of experience in MSME project consulting, he has built the team that has delivered more than 28,000 project reports for clients worldwide, helping entrepreneurs plan and finance profitable manufacturing businesses.

Ajay Kumar Gupta on LinkedIn

Published
Last updated
Next review
Oct 2027
Reviewed by
NPCS project team

This page is reviewed every 12 months, or sooner when scheme limits, GST rates, BIS rules or pollution categories change. The sample report is illustrative: its figures are generated from industry-typical ratios for a unit of this size, checked so every statement balances, and are not taken from any client project.

Planning a different grain milling project?

These are a few of the projects we advise on. NPCS's published client list records 58 grain milling assignments, so tell us what you are planning.

Tell us your project

Recent grain milling assignments

  • Ajay Cashew Industries
    Technical and Financial Feasibility Report on Flavoured Cashew Processing with PackagingChandgad, 2026
  • Suman Business Park Pvt. Ltd
    Detailed Project Report on Maize processing and value-added by-productsChhatrapati Sambhaji Nagar, 2026
  • Reverence Bio Energy Pvt Ltd
    Project Report on Maize StarchBagalkot, 2026
  • Dhampur Sugar Mills Limited
    Techno-Economic Project Study on Potato StarchBijnor, 2026
  • Sergio Cantillo Campos
    Project Planning and Feasibility Report on Maize and Maize ProductsUnited States of America, 2025
  • Reliance Solutions Limited
    Project Planning and Feasibility Report on Maize processing and value-added productsBangladesh, 2024
  • Malook Chand Oil Co
    Project Planning and Feasibility Report on Maize Starch & Liquid GlucoseAligarh, 2023
  • Techbond
    Technical and Financial Feasibility Report on Starch IndustryMalaysia, 2023

Get a cold water starch project report for your plant

Tell us your planned capacity, location and loan scheme. Our team will confirm the scope and price of a report built on current machinery quotations and raw material prices for your region.

Reports are prepared in the format banks and PMEGP offices ask for, with five-year projections, DSCR and break-even.

Request a Cold Water Starch Project Report

Share your plan and our team will call you back within 24 hours.

Start with the sample, then plan your own unit

Open the free cold water starch sample report to see the format, then talk to NPCS about a report for your capacity and location.

Sample PDF WhatsApp
Cold Water Starch sample project report (illustrative) Download New tab

Illustrative sample. Figures are representative and not from a real project.

Call Us WhatsApp