What is a barley malt project report?
A barley malt project report is a detailed project report (DPR) for a malting unit that steeps, germinates and kilns barley into malt for brewers and food makers. It sets out the process, machinery, barley buying, market, project cost, means of finance, five-year projections, DSCR and break-even that a bank needs before funding.
Entrepreneurs, cooperatives and food companies use it to size a malt house and raise a term loan; lenders use it to judge whether the unit can repay.
Also known as: malting plant project report, DPR for barley malt manufacturing, barley malt business plan, malt house project report.
What a bank checks in a barley malt project report
A malting unit lives on the gap between barley and malt prices, so lenders look hard at a few numbers. These are the values in our sample report and why each one matters.
Barley is most of the cost. A report showing a much lower share is usually ignoring malting loss or using an old barley price.
Water, steeping aids and kiln additives make up the rest. The report should test a 10% rise in barley price against DSCR.
Barley is bought after the spring harvest. In our sample this stock is the largest current asset, so it drives the cash credit limit.
The debt service coverage ratio shows how many times cash earnings cover loan instalments. The lowest year in our sample is 1.29.
Values are the assumptions in our illustrative sample. Your report uses figures for your capacity, barley source and buyers.
How much does a malting plant cost?
Cost rises with daily output and with how much of the germination and kilning is automated. The middle tier is the unit in our sample report, which works 300 days a year and prices malt at ₹44,200 per MT ex-factory. The other two tiers are indicative ranges.
Small malting unit
₹1.3–2.2 crore
About 2–4 MT per day, batch boxes
- Machinery₹70–120 lakh
- Building and fit-out₹40–70 lakh
- Working capital margin₹10–20 lakh
Specialty malt for food makers and small brewers
Mid-size unit
₹412 lakh
8.2 MT per day, 2,460 MT per year
- Plant and machinery₹178 lakh
- Land and building₹151 lakh
- Working capital margin₹36 lakh
Term loan ₹309 lakh (75%), promoter ₹103 lakh
Commercial malt house
₹14–23 crore
About 30–50 MT per day
- Machinery₹8–13 crore
- Land and building₹4–7 crore
- Working capital margin₹1.5–3 crore
Usually tied to brewery supply contracts
Small and commercial ranges are indicative. Costs vary with land price, kiln design and whether germination is boxed or in towers.
Barley malt manufacturing process
Malting wakes the barley grain so its enzymes break down starch and protein, then stops growth with heat. One batch takes about a week from steeping to finished malt.
- Cleaning and grading
Barley is cleaned of dust, stones and broken kernels and graded by size, because uneven grain takes up water unevenly in the steep.
- Steeping
Grain is soaked in conical tanks with air rests for about two days, raising moisture from 12–15% to 44–46%.
- Germination
Wet grain rests for 4–5 days in germination boxes under cool, humid air and is turned so rootlets do not knit together.
- Kilning
Hot air dries the green malt over 24–48 hours, finishing at higher temperature, and brings moisture down to about 4–5%.
- Deculming
Dry rootlets are rubbed off and screened out; they are sold as cattle feed.
- Testing and storage
Each lot is tested for moisture, extract and diastatic power (enzyme strength), then stored in silos or packed in bags.
Raw materials for barley malt
About 120–130 kg of barley gives 100 kg of malt, so barley buying decides the margin. Maltsters prefer plump, evenly sized grain with good germination. When you budget for barley, track the minimum support price, which the Centre raised by ₹136 per quintal for the 2027-28 season.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Malting barley (two-row or six-row) | 94% | 461.80 |
| Process water and steeping aids | 3% | 14.74 |
| Kiln fuel additives and fumigants | 3% | 14.74 |
| Total | 100% | 491.28 |
Machinery for a barley malt plant
Steeping, germination and kilning take nearly two thirds of the machinery budget. Air handling matters as much as the vessels, because temperature and humidity control decide malt quality.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Pre-cleaner, destoner and grader | Cleans and sizes the barley | 17.78 |
| Conical steeping tanks with aeration | Soaks grain with air rests | 28.45 |
| Germination boxes, turners and humidified air fans | Grows the grain evenly | 46.23 |
| Single-floor kiln with hot air generator | Dries and cures green malt | 39.12 |
| Deculming and polishing machine | Removes rootlets and dust | 10.67 |
| Elevators, conveyors and silos | Moves and stores grain and malt | 21.34 |
| Refrigeration and air handling | Cools air for germination | 7.11 |
| Malt quality laboratory | Tests moisture, extract and enzymes | 7.11 |
| Total plant and machinery | 177.81 | |
Costs are the sample report's estimates for an 8.2 MT per day unit. Get current quotations before you finalise.
Who buys barley malt in India?
Malt is a bulk ingredient bought to specification. Brewers want high extract and enzyme strength; malted food and malt extract makers care more about colour, flavour and food safety. Most buyers sign annual or seasonal contracts and test every lot on arrival.
- Breweries and distilleries
- Malted milk food and health drink makers
- Malt extract and malt flour manufacturers
- Bakery, biscuit and breakfast cereal makers
- Cattle feed buyers, for malt rootlets
Where a new unit wins: large maltsters serve big brewers first. A mid-size unit near barley-growing areas can supply food makers and smaller brewers with specialty and food-grade malt in smaller lots.
Licences, standards and GST for a malt unit
| Business registration | Udyam (MSME) registration and GST registration |
|---|---|
| Food safety | FSSAI licence for manufacturing; FSSAI notified standards for malt and malt-based foods in February 2017 |
| Product standards | IS 6895 (barley malt) and IS 6894 (malting barley) from BIS are the usual quality references; neither is a compulsory certification |
| GST | Malt under HSN 1107 at 5% from 22 September 2025, down from 18% |
| Pollution board consent | Consent to establish and operate from the State Pollution Control Board; steep water is the main effluent and the state fixes the category |
| Factory and power | Factories Act registration where thresholds apply, and an industrial power connection for fans, chillers and the kiln |
Checked October 2026. Rules and rates change; confirm with the department before you apply.
Loans and schemes for a barley malt plant
Most malting projects are larger than the small-loan schemes allow, so a term loan is the usual route.
MSME term loan with CGTMSE
Guarantee cover up to ₹10 croreCollateral-free guarantee for eligible micro and small units. Fits the sample unit and most mid-size plants.
NCDC finance for cooperatives
Cooperative malting projectsNCDC has published a model DPR for a cooperative malt processing unit funded by its term loan and members' share.
PMEGP
Manufacturing projects up to ₹50 lakhMargin-money subsidy of 15–35%. Fits only a very small malt or malt flour unit, not a full malting line.
Scheme limits change. Confirm current terms with the bank or the scheme portal before applying.
Mistakes that weaken a barley malt project report
- Treating 1 kg of barley as 1 kg of malt
Moisture, respiration and rootlet removal take away a fifth or more of the weight, so output and sales come out too high.
- No finance for barley stock
Barley is bought in one season and malted all year. Without stock in working capital, the cash credit limit runs out within months.
- Under-costing kiln fuel and cooling
Kilning and conditioned air for germination run every day; quote them from the actual fuel and power tariff, not a rule of thumb.
- No buyer specification or lab
Brewers reject lots on moisture, extract or enzyme strength. A report without a testing plan and named buyer type looks speculative to a lender.
How NPCS helps you set up a barley malt unit
- Capacity and malt gradesSize the plant and choose brewing, food or specialty malt to suit your buyers.
- Barley sourcing and stock planWork out barley needs, malting loss and the stock to carry after harvest.
- Bank-ready project reportProjections, DSCR and working capital in the format your lender or NCDC wants.
- Machinery, layout and approvalsCompare steeping, germination and kiln options and list approvals for your state.
NPCS's published client list includes 58 assignments in grain, pulse and rice milling. The NPCS project team, led by founder Ajay Kumar Gupta, has prepared project reports for entrepreneurs, banks and companies since 1994.
What's inside the barley malt sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
18 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS barley malt project reports
These are barley malt project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Barley Malt | 100MT/Day | ₹16.72 crore | 26% | 43% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Barley Malt project report: frequently asked questions
What is the barley malt manufacturing plant cost in India?
A small malting unit of 2–4 MT per day needs roughly ₹1.3–2.2 crore, and a 30–50 MT per day malt house about ₹14–23 crore. Our sample report models an 8.2 MT per day unit at ₹411.73 lakh, including land, building and working capital margin. These are indicative figures; a project report prices your own capacity and site.
How much barley is needed to make 1 kg of malt?
About 1.2 to 1.3 kg of clean barley gives 1 kg of finished malt. The rest is lost as moisture, respiration during germination and the rootlets removed after kilning. A government sample DPR for a malt unit puts it at 120 to 130 kg of barley per 100 kg of malt. Your barley budget must allow for this loss.
Which machines are needed for a malting plant?
The core line is a barley pre-cleaner and grader, aerated steeping tanks, germination boxes with turners and humidified air fans, and a malt kiln with a hot air generator. Add a deculming machine, elevators, conveyors, silos and a small laboratory. In our sample report the germination section is the largest single machinery cost.
Is barley malt manufacturing profitable?
In our illustrative sample, an 8.2 MT per day unit earns a 16% return on investment in Year 3. It breaks even at 41% of capacity and pays back in about 4.4 years. Real profit depends on the barley price after harvest, malting loss, kiln fuel cost and whether you hold an annual contract with a brewer or food maker.
What is the GST rate on barley malt?
Malt, whether or not roasted, falls under HSN 1107. The GST Council cut its rate from 18% to 5% with effect from 22 September 2025. Malt extract and food preparations of malt fall under other headings, so check the HSN code for each product you sell with your tax adviser before you invoice.
Barley malt ka business kaise shuru kare?
Start by finding two or three buyers, such as a brewery or a malted food maker, and learn their malt specification. Then fix capacity, buy land near barley-growing areas, get FSSAI and pollution board approvals, and prepare a bank-ready project report for the term loan. Plan finance for several months of barley stock bought after the harvest.
Is the sample project report on barley malt free, and can I use it for a bank loan?
The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report. Its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and loan scheme.
Sources and references
- Sample DPR: Malt Processing UnitNational Cooperative Development Corporation, checked Oct 2026
- Recommendations of the 56th meeting of the GST Council (rate changes from 22 September 2025)GST Council, Ministry of Finance, checked Oct 2026
- IS 6895:1973 Specification for barley maltBureau of Indian Standards, checked Oct 2026
- IS 6894:1993 Malting barley, specificationBureau of Indian Standards, checked Oct 2026
- India publishes final standards for malt and malt based foodsAPEDA AgriExchange, checked Oct 2026
- Union Cabinet hikes minimum support prices for rabi crops for 2027-28 marketing seasonNews On AIR, Prasar Bharati, checked Oct 2026
- Prime Minister's Employment Generation Programme (PMEGP) guideDistrict Industries Centre, Ganjam, Government of Odisha, checked Oct 2026
- Credit Guarantee Fund Trust for Micro and Small EnterprisesCGTMSE, checked Oct 2026
