Investment Opportunities & Business Ideas in Egypt- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 61 of 97 | Total 964 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 61 96 97   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Electronic Cut Out For Automobile

Electronic cut-out is an electronic protection which can charge and discharge the battery as per the alternator requires current. A pair of wire is mounted on the cut-out, called as phase and neutral which comes from the alternator discharged from the alternator and pases through the circuit of the cut-out. As the speed of the alternator increases and its terminal voltage rises, current will flow from the alternation to battery through electronic cut-out. When the output voltage exceeds the predefined voltage, which is adjusted before at potentiometer, then the cut-out does not allow the battery to charge again. The current flow through the cut-out will be grounded. Again when the alternator voltage decreases compare to the battery voltage, then the battery will start supply the current to the alternator. The supply of the battery current will continue till the voltage of the alternator rises to its pre-define value. The cut out has no part in varying the rate of charge of the alternator, its only function being to connect the battery to the changing circuit as soon as the alternator terminal voltage rises above that of the battery, and to disconnect the battery when the alternator terminal voltage falls below this level. If the cut out contacts remain closed with the alternator stationary, a heavy current will flow from the battery through the alternator armature and will very quickly burn out the armature conductors. For this reason it is extremely unwise to close the cut-out contact whilst the engine of the vehicle is stationary.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Red Oxide Primer [Anti-Corrosive]

Red Oxide Primer is specially formulated for use on both bare and rusty iron and steel. Red oxide primer is a specially formulated coating used as a base coat for ferrous metals. Red-oxide primer serves a similar purpose to interior wall primers in that it prepares your metal for a topcoat, but it also gives iron and steel surfaces a layer of protection. Working with red oxide primer is not difficult. Red oxide primer is intended for use on interior and exterior ferrous metal and is not usually suitable for galvanized or nonferrous metals like aluminum, copper or brass. Ferrous refers to metals that contain iron. If you’re uncertain whether your metal is ferrous or nonferrous, use a magnet to test it. Ferrous metals are magnetic, and nonferrous metals are not. It is also not suitable for use on asphalt or bituminous surfaces. Red oxide primer is an anti-corrosion coating designed to stop rust formation. It can be applied directly over a rusty surface and is most ideal for exterior use. Red oxide primer can be covered with most conventional topcoats once it fully dries. Red Oxide Primer can be used for: • BBQ • Fire Surround • Garage door • Metal Garden furniture • Metal Railings • Radiator
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Pressure Die Casting

Pressure die casting is a quick, reliable and cost-effective manufacturing process for production of high volume, metal components that are net-shaped have tight tolerances. Basically, the pressure die casting process consists of injecting under high pressure a molten metal alloy into a steel mold (or tool). This gets solidified rapidly (from milliseconds to a few seconds) to form a net shaped component. It is then automatically extracted. Die casting process is preferred for nonferrous metal parts of intricate shapes. Examples of products are automobiles appliances, hand tools, computer peripherals, toys, optical and photographic equipment etc. Advantages of Pressure Die Casting: • Lower costs compared to other processes. • Economical - typically production of any number of components from thousands to millions before requiring replacement is possible. • Castings with close dimensional control and good surface finish • Castings with thin walls, and therefore are lighter in weight Depending upon the pressure used, there are two types of pressure die casting namely High Pressure Die Casting and Low Pressure Die Casting. While high pressure die casting has wider application encompassing nearly 50% of all light alloy casting production. Currently low pressure die casting accounts for about 20% of the total production but its use is increasing. High pressure castings are must for castings requiring tight tolerance and detailed geometry. As the extra pressure is able to push the metal into more detailed features in the mold. Low pressure die casting is commonly used for larger and non-critical parts.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Bonded Abrasives

Bonded abrasives are a mixture of abrasive grains, fillers and bonding materials. The bonding agent can be vitreous; resin, rubber, shellac, epoxy, magnesite and a range of bonding materials often referred to as a ‘plastic’. They are used to remove surface materials such as metal, ceramics, glass, plastics, and paint. Bonded abrasives are used in both grinding wheels and abrasive stones or sticks. Grinding wheels are used in a variety of applications and industries, while abrasive stones or sticks are used for sharpening edges and honing internal or external surfaces. Bonded abrasives are the natural or synthetic abrasive grains which are usually bonded into a solid form. Bonded abrasives are usually made of the abrasive grains that are closely sized and molded or pressed to produce a wide variety of the products. Bonded abrasives are usually in the shape of a wheel. The products range of the bonded abrasives also includes the snagging wheel, mounted wheel, grinding and the cut-off wheel, cones and plugs. Bonded abrasives are mainly used for precision grinding, cutting, rough grinding, and lapping, sharpening and light grinding among others. The growing automobile industry is expected to boost the overall growth of the bonded abrasives market. Bonded abrasives are widely used in giving the required surface finish as well as the desired design to the automobiles. The increasing demands for the advanced technology based machineries are further expected to boost the demand for the bonded abrasives. The bonded abrasives help in the super finishing of the machine shaft in order to achieve the required roughness. The bonded abrasives are used in providing the smooth finish to the various tools and the machineries that are manufactured. The bonding abrasives are used in the polishing as well as deburring of the bore holes on the machine blocks. Regular maintenances of the workshops further boost the overall demand for the bonded abrasives market. The increasing use of the bonded abrasives for de-scaling and for the rust and dust removal has augmented the overall growth for the bonded abrasives market. The bonded abrasives are also widely used in the medical sector. Bonded abrasives are used to sharpen the dental tools. The bonded abrasives are also used for smoothening of the edges of the dental tools such that it is extremely convenient for the doctors to use the dental tools on the patients.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Magnesium Hydroxide Powder

Magnesium hydroxide is a white, odourless, inorganic alkaline compound, which has strong neutralizing properties compared to conventional neutralizing agents such as caustic soda. Magnesium hydroxide is abundantly found in nature in the form of brucite minerals or produced from brine sea water by the precipitation method. It finds variety of application across diverse set of industries. Some of the prominent applications include environmental applications such as flue gas desulphurisation and wastewater treatment. It provides superior and cost effective solution as a neutralizing agent in waste water treatment application, as compared to the conventional water treatment chemicals such as caustic soda. In flue gas desulphurisation, it is used as an absorber to recover sulphur di oxide from flue gas. Another protruding application of magnesium hydroxide is in pharmaceuticals. Its suspension, also known as milk of magnesia is used as an antacid or laxative to recover gastrointestinal illnesses. It also used as flame retardant or smoke suppressant in plastics such as polyamide, polyvinyl chloride, and polypropylene, etc. Its endothermic degradation at relatively higher temperature and thermal stability marks it a potential choice as an additive over other flame retardant additives present in the market. Other magnesium hydroxide applications include cellulose protector in pulp and paper industry, as a source of magnesium for different applications, manufacturing of magnesium salts, ceramic, food additives, and lubricants. The increasing consumption of magnesium hydroxide in environmental applications is expected to be the primary driver for magnesium hydroxide market growth. Increasing wastewater treatment investment by oil & gas industries, chemical industries, power plants and municipal corporations, globally is anticipated to drive the magnesium hydroxide market growth, further. Besides, rising efforts of environmental organizations toward reducing the use of halogenated flame retardants is anticipated to drive the magnesium hydroxide market, over the forecast period.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Automobile Gaskets

Gaskets are the components used in vehicles to prevent fluid and gas leakage. They fill the gap between the automotive components thus ensuring no leakage. The seals prevent lubricants from escaping the bearings. The seal also avoids dust and other contaminants from entering the machinery. With the technological advancements, gaskets and seals offer an effective means to obtain better fuel economy and have reduced the repair and maintenance requirement, thereby improving the average life span of automotive components. Moreover, the stringent regulations regarding the maximum limit on emissions as incorporated by automotive agencies are further expected to drive the market. There has been an increasing usage of lightweight materials such as silicone rubber to further cut fuel cost and improve efficiency. The manufacturers are focusing on the development of materials that reduce the fuel requirement and can withstand high heat as well as pressure.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Solar Water Heater

Solar water heater is a device that can be used to capture sunlight in order to heat the water in your pipes to be used for baths, showers, etc. Solar water heater or SWH comprises a solar panel, inverter system, and a water storage tank. The sunlight that falls on the solar panels is used to heat the water inside the insulated storage tank either through a pump or directly through the thermosyphon principle. In the thermosyphon principle, fluid circulation is based on natural convention, where warm water rises and is replaced by cold water. Some of the advantages of SWHs over CWHs are: cost-effectiveness and reduced dependence on other fossil fuels. SWHs are generally installed on the roof of a building where the intensity of sunlight is maximum throughout the day. The market for solar water heaters in India is expected to reach INR 1369 crore till 2021. Karnataka and Bangalore are having maximum share in India. In India the SWH market has been through many ups and downs. The market changes drastically in some year, remains stable for a while and then again decreases as shown in the below graph. In solar water heaters the residential sector is driving the market. Residential sector has penetrated almost 80% in the market. Industries and other commercial institutes are also picking up solar water heater as a better option. Electric water heaters are still dominating the market, but solar water heater is also growing rapidly to make a considerate share in the water heater market. Global Solar Water Heater Market is projected to exceed USD 4 billion by 2024, growing demand for environment friendly, cost effective and reliable systems for water heating purposes across commercial, industrial, and residential sector will augment the solar water heater market. Ability to reduce electricity bill by 50% to 80% will encourage the product penetration over the forecast timeline.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Plastic Moulded Furniture

Plastic moulded furniture has virtually exploded in the Indian scenario and from a stage of infancy the field has risen to almost 70 million in volume, consuming almost 170 kt of polypropylene material. Plastic furniture is essentially based on composition of polypropylene (PP) which contains hopolymer to provide rigidity and copolymer to lend impact. Plastic moulded furniture could be labelled as environment friendly since it contributes immensely in saving forests. Bihar produces more than four lakh units of plastic furniture per day, including chairs, centre tables and dining tables. Industry experts said each mould used in manufacturing plastic furniture costs around Rs 25 lakh. China, Nigeria, America and Germany are the major suppliers of moulds in the world.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Corrugation Gum Powder (Adhesive- Dry Powder)

Adhesives market in India is forecast to cross US$ 1.3 billion by 2025, on account of continuously growing building and construction sector, increasing demand for packaging materials in food & beverage industry and growing furniture industry. Growth in India adhesives market can also be attributed to macroeconomic factors such as increasing population base, rising per capital income and rapid industrialization. Moreover, rising technological advancements have led to development of advanced and hybrid adhesives that have excellent bonding strength and flexibility, under a wide range of temperatures. Rising awareness about different types of adhesives and their applications in various end user industries is projected to boost demand for adhesives in India during 2016-2025. Corrugation Gum Powder are used in corrugated box manufacturing industry. It is a cold water soluble adhesive powder for corrugation work in corrugated box and board making.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Abrasive Paper & Flint Paper

Emery paper is a type of abrasive paper or sandpaper that can be used to abrade (remove material from) surfaces or mechanically finish a surface. Operations include deburring, polishing, paint removal, corrosion removal, sizing, etc. This is accomplished by moving the abrasive-coated paper, with some pressure, against the object being processed. Abrasion may be performed by hand, electrically powered, or air powered equipment. Abrasives are materials, usually minerals, that are used to finish or shape a working piece or other material through friction or rubbing, which in turn wears away the surface of the workpiece or subject material. There are a multitude of domestic (residential), commercial, industrial and research and development (R&D) or technological applications in processes such as buffing, cutting, drilling, grinding, honing, lapping, polishing, sanding (abrasive machining), and sharpening. Many factors are at play in determining how quickly a substance is abraded, including the adhesion between the grains, contact force, hardness differential between the two substances, grain size, loading, and the use of coolant, lubricant, or metalworking fluid. There is high demand for sand paper products for finishing and smoothing layers in industries. The Coated Abrasives Market is a growing market with many applications of abrasive coating on various products such as abrasive wheels, sandpaper or abrasive paper, grinding disk and abrasive rolls etc. used in various end user industries due to the abrasive surface across the globe. This market is expected to witness high demand owing to the increasing production of abrasive cloth, abrasive sheets by coated abrasives manufacturers and growing supply by abrasive suppliers for end use purposes in various regions across the globe in the upcoming years.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 61 of 97 | Total 964 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 61 96 97   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top

Products & Services

Others

Contact Us

My Account

Help

Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search


Search Project Reports & Profiles





Subjects