REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Investment Opportunities & Business Ideas in Mexico, North America - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 23 of 234 | Total 2340 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 23 233 234   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

GALVANIZED IRON WIRE - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

The production of G.I. Wire from H.B. wire is not complicated. In case of H.B. wire drawing from H.B. bars, certain mechanical process is used. An important difference between bar drawing and wire drawing is that the bars must remain straight. The length of the bars, which can be drawn, is limited by the maximum travel of the carriage, which may be from 50 to 100 feet. Wire and wire products, including flat strips are one of the largest consuming items. G.I. Steel wires of standard quality are used for the manufacture of ropes for various applications, barbed fencing and nails etc. Although the G.I. flat wires are manufactured from mild steel as starting material, range over a wide field. The project, however, is designed to turnout only wires, which have the largest demand, i.e. flat wires or strip in galvanized form. There is a good scope for new entrepreneurs to venture into this field.
Plant capacity: 8.00 MT./dayPlant & machinery: Rs. 70 lakhs
Working capital: -T.C.I: Rs. 419 lakhs
Return: 46.00%Break even: 32.00%
Add to Inquiry Add to Inquiry Basket

FOOD PROCESSING UNIT(CASSAVA PROCESSING INTO FLOUR STARCH, GARI AND CUSCUS)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

There are hundreds of commercial varieties of cassava in various equatorial regions. These varieties fall into two main categories: Manihot palmate and manihot aipi or bitter and sweet cassava. Particularly, in some regions, the cassava plant may be subject to treat by various diseases. A major effort has been put forward to select cassava seed disease resistant. A factor not always appreciated in cassava growing areas is the nutritious nature of cassava leaves. They contain good quantities of vitamin A and C, as well as minerals, and a higher proportion of protein than the tubers. A process for converting cassava starch into alcohol, using a fungal enzyme preparation from submerged culture to hydrolyze the starch into sugar was reported by teixeira. Due to increase of food habits in through out the world, it can be said that there is very good market demand now. It can be concluded that any new entrepreneur may enter in this field of production, will be successful.
Plant capacity: (Cassava Flour 3000, Starch 30000, Gari 1500, Cuscus 1500) MT / AnnumPlant & machinery: Rs. 400 Lacs
Working capital: -T.C.I: Cost of Project : Rs. 1500 Lacs
Return: 35.00%Break even: 84.00%
Add to Inquiry Add to Inquiry Basket

TRADING OF IRON ORES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Steel is considered to be the strongest material in that price. Day to day life and growth of industry and infrastructure in any country totally depends on steel. It is consumed in all spheres of life. It has played major role in the development of major economics like US, EU, Japan and now China. Investment of Rs. 90,000 crores has been made in the steel sector, which is the highest among all industrial sectors in India. Iron ore is used in pigment, polishing compound, metallurgy, magnetic inks and in ferrites for electronic industry, coatings for magnetic tape, catalyst. It is the second most important abundant metal in the earth. The global demand growth rate is estimated as 6%. The anticipated steel demand and per capita consumption in India is expected to double in the next eight years. Even at a conservative growth rate of six percent steel demand in 2012 will be about 50 MT. To looking its demand, the scope for investment in this project is bright.
Plant capacity: 5000 MT/DayPlant & machinery: Rs. 156 lakhs
Working capital: -T.C.I: Rs. 2396 lakhs
Return: 52.00%Break even: 21.00%
Add to Inquiry Add to Inquiry Basket

CRANE HOOKS AND OTHER FORGED PRODUCTS(SUSPENSION PART, SUSPENSION SHAFT, SAFETY LATCH) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials

A lifting hook comprising a suspension part fitted with a suspension shaft, which supports a hook part provided with a slot. A safety latch is pivotally journalled in the hook part. When the safety latch is swung down, the suspension shaft moves into said end portion, whereby the safety latch is locked. The present invention refers to a lifting hook fitted with a safety latch device which, when the hook is loaded by a load suspended from same, safely closes the hook opening and makes it impossible to open it. Few organized and many private companies are manufacturing cranes and they also produce crane hooks. Forging is categorized on the basis of temperature to which the metal is heated, on the type of pressure applied and on the type of die used. There are a large number of units in the forging sector. Most of these units are located in close proximity to the automobiles belts. There is a good scope to invest in this project.
Plant capacity: 5 MT/dayPlant & machinery: Rs. 57 Lakhs
Working capital: -T.C.I: Rs. 352 lakhs
Return: 48.00%Break even: 33.00%
Add to Inquiry Add to Inquiry Basket

OCTG TUBE AND FITTINGS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Piping may represent as much as 25 percent of the cost of a chemical-process plant. The installed cost of piping systems varies widely with the materials of construction and the complexity of the system. The economics also depends heavily on the pipe size and fabrication techniques employed. O.C.T.G tube is used in the oil company to deliver mineral oil through this pipe. It is used in the manufacturing of pump parts and gas lift valves. It is largely used in the food and chemical processing industries. Pipes and tubes have varied applications in various industries mainly as transport media for liquid, semi liquid fluids and gases. The future demand is estimated by method of trend analysis. The trend in consumption being highly fluctuating attempt is made to harmonies the series with 3 years moving average. The export demand is estimated to be 7% of the total demand. This provides very good scope for new investment.
Plant capacity: 1500 MT / Annum Tubes, 600 MT/Annum FittingsPlant & machinery: 554 Lakhs
Working capital: N/AT.C.I: Cost of Project : 752 Lakhs
Return: 45.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

GLASS BOTTLES FOR COSMETICS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Glass is so much a part of our daily life that we cannot imagine living without it. Glassware is used both by the consumer as well as by the Government and industry. The primary aim of packaging is to protect the product from air, light, heat, cold, moisture dust, dirt etc. There are three raw materials for glass making, viz. Silica Sand, Soda Ash and Lime. These should be cheaply and freely available as a natural resource. The value of output of cosmetics industry is estimated at Rs.16 bn in the organized sector. Despite the downward trend in the demand of a large number of consumer products, the cosmetic industry continues to grow at a high rate basically of the entry of new players and globally known brands. There is a fair scope for new entrepreneur in this field.
Plant capacity: 1500 MT /AnnumPlant & machinery: 91 Lakhs
Working capital: -T.C.I: Cost of Project : 193 Lakhs
Return: 39.00%Break even: 71.00%
Add to Inquiry Add to Inquiry Basket

POTATO CHIPS/WAFERS AUTOMATIC PLANT -Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Plant Layout

Potato is widely consumed as food all over the world. Potatoes are consumed not only as a fresh vegetable, but also in a variety of processed forms. Potato chips are basically used for snacks purposes. They are produced by rapid dehydration of potato slices by direct contact with hot oils. Its crispness and special palatability make it the favourite of people of all age groups. Potato wafers and chips are one of the most popular food products now-a-days. They are dried chips/wafers from semi-boiled potatoes. Potato wafers are consumed by and large with alcoholic drinks, in parties and during journey. The demand in future would depend upon many factors like population, consumer preference for wafers over other similar food products, urbanization etc. In terms of taste and convenience no other food item is as acceptable as wafers. Keeping all these in a consideration the demand is expected to increase at 30% per annum. A new entrepreneur can confidently venture into this field.
Plant capacity: 120 MT / AnnumPlant & machinery: 166 Lakhs
Working capital: N/AT.C.I: Cost of Project : 268 Lakhs
Return: 38.00%Break even: 35.00%
Add to Inquiry Add to Inquiry Basket

Ferro Silicon - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Ferro alloys are used in making alloy steels and castings of different special types as addition agents. Ferro alloys are usually made in electric-arc furnaces. Alloy steel have often greater limitations on tramp element concentrations than plain carbon steels. In the iron and steel industry, silicon alloys are used for alloying, deoxidizing and reducing other alloying elements such as manganese, chromium, tungsten and molybdenum. Ferro silicon containing 14-95% silicon are used extensively by the iron and steel industry and silicon is present in most commercial grades of steel and cast iron. Most silicon metal is consumed in the manufacture of aluminium-alloy casting containing from 2 to 25 % silicon. Ferro silicon is produced in several grades to suit the quality & economy requirements of various steel industries. The use of it improves the steel quality by clearing the impurities present in iron. Such steels are suitable for transformer core making & other electrical applications. It can be concluded that there is a good scope for new entrants.
Plant capacity: 10 MT/DayPlant & machinery: 79 Lakhs
Working capital: -T.C.I: 386 Lakhs
Return: 56.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

Steel Fabrication Unit - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

The importance of iron & steel among other materials is well known for industrialization and national economy. Metal fabrication is the group of entire processes employed to shape the metals into the desired form by melting & casting down to hot/cold working, joining by welding, brazing, soldering or riveting, belt-fastening & similar other processes. The fabrication items are made as per the drawing specifications provided by the concerned purchasers for use with in the service conditions determined by their expert consultants. It is a glorious era for the Indian steel sector. Particularly, the governments new national highway plans coupled with other infrastructure developments are expected to give fillip to steel consumption. The fact remains that everybody in the country is aware of the benefits offered by steel. There is a good scope for new entrants.
Plant capacity: 2 MT/dayPlant & machinery: 25 Lakhs
Working capital: -T.C.I: 131 Lakhs (W/c. 2 month)
Return: 47.00%Break even: 40.00%
Add to Inquiry Add to Inquiry Basket

Poultry Farming With Hatchery - Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

The production of poultry in the United States and generally throughout the world is carried out by a highly specialized, efficient poultry industry that has been a leader in trends of scale and industrialization that have taken place in American agriculture over the past half-century. A hatchery, breeder flocks, feed milk, processing plants and a number of contract growers served by technical service staff make up a typical integrated broiler company. More than 90 % of the commercial broilers are raised by grovers under contact to a broiler farm. There is a surplus consumption of 2 crore eggs per day in AP, which is being exported to other states such as West Bengal, Utter Pradesh, Maharashtra, Bihar etc, incurring transport charges of about 15-20 paise per egg. Poultry sector is one of the rare examples of socio-economic development, which attain its present status without much aid from government or investments from five years plans. There is a good scope for new entrants.
Plant capacity: 5000 layers/Annum; 1000 Birds/WeekPlant & machinery: 3 Lakh
Working capital: N/AT.C.I: 41 Lakh (one month W/C.)
Return: 44.00%Break even: 44.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 23 of 234 | Total 2340 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 23 233 234   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top