Google Search

Search

Already a Member ?

Best Business Opportunities in Meghalaya- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Meghalaya is a state in north-east India. The name means "the abode of clouds" in Sanskrit. As of 2011, the state has a population of 2,964,007 and is the 23rd most populous in the country. The population of Meghalaya as of 2014 is estimated to be 3,211,474. Meghalaya covers an area of approximately 22,430 square kilometers, with a length to breadth ratio of about 3:1

Meghalaya is predominantly an agrarian economy. Agriculture and allied activities engage nearly two-thirds of the total work force in Meghalaya. However, the contribution of this sector to the State's NSDP is only about one-third. Agriculture in the state is characterized by low productivity and unsustainable farm practices. Despite the large percentage of population engaged in agriculture, the state imports food from other Indian states.


TOURISM

 Meghalaya has some of the thickest surviving forests in the country and therefore constitutes one of the most important ecotourism circuit’s in India. The Meghalaya subtropical forests support a vast variety of flora and fauna. Meghalaya has 2 National Parks and 3 Wildlife Sanctuaries.   Meghalaya also offers many adventure tourism opportunities in the form of mountaineering, rock climbing, and trekking and hiking, water sports etc. The state offers several trekking routes, some of which also afford an opportunity to encounter rare animals such as slow loris, assorted deer and bear. The Umiam Lake has a water sports complex with facilities such as rowboats, paddleboats, sailing boats, cruise-boats, water-scooters and speedboats. Tourism in India is a growing industry, and as per World Tourism Organization predictions, India will be a leader in using tourism as an employment generator. The State of Meghalaya must be placed in a strategic position to take advantage of this growth.

“MEGHALAYA TOURISM DEVELOPMENT CORPORATION” has been set up for developing and promotion of Tourism in Meghalaya. The Corporation shall make efforts to increase its revenue to enable to carry out promotional activities. MTDC will organize package tours not only to Cherrapunjee but to other tourist destinations; organize training for guides, etc.

INDUSTRIAL SECTOR

The New Industrial & Investment Promotion Policy is designed to facilitate investments in new sectors across the State and thus ensure accelerated and sustained growth. The Policy focuses to attract, facilitate and promote wider expectations and high end investment.

There is an urgent need to promote investment in backward and difficult but resource rich areas. Therefore the policy provides additional incentives and support for such investments.


OBJECTIVE OF THE POLICY

•        To promote investment in all sectors

•        Generate employment opportunities for the local people in the industries and allied sectors.

•        To provide special incentives for promoting local Entrepreneurs in setting up of micro, small & medium manufacturing and service enterprises.

•        Develop human resources and bring about improvements in the quality of life by promoting industries in sectors where the state has comparative advantage.

•        Achieve a balanced and growth oriented development covering the entire state through promotion of village and small scale industries.

•        Encourage need based development of local entrepreneurial skills through intensive motivation and training programmes at District, Sub-division and Block levels.

•        Provide guidance to prospective entrepreneurs by building up a data bank of project-profiles and other connected information. Special support to local entrepreneurs will be provided, and monitoring will be done to enable them to be successful.

•        Simplify rules and procedures by providing a single-window clearance facility for all investment proposals as applicable.

•        Promote Tourism, and make Meghalaya a tourist destination.

•        Promote IT as industries.

•        Promote first generation entrepreneurs. Government will encourage setting up of Entrepreneurship Development Institute by private or in PPP mode.

SALIENT FEATURES OF THE INDUSTRIAL POLICY

•        State Government believes in promoting private enterprises for speedy economic development of the State. The Government also stands committed to ensuring the healthy growth of existing industries. For this purpose, Government will ensure optimum number of industries by not permitting excess in any specific sector, thereby ensuring sustainability of existing business.

•        Enterprises promoted and managed by “Woman Entrepreneur”/physically challenged will get additional 10 % (ten percent) incentives on the State Capital Investment Subsidy.

•        Meghalaya has a long international border which needs immediate attention for development. To address this issue, 10 Kms towards the State from the International border is declared as “PRIORITY AREA” and enterprises set up within the 10 Kms area will be given special incentives to be known as “Border Area Subsidy”.

•        Government of Meghalaya recognizes:

1.       Hotels (not below two star category) and Amusement Parks.

2.       Medical and health services in the nature of nursing homes with a minimum capacity of 25 beds and Super – Specialty Health Care.

3.       Vocational training Institutes.


INDUSTRIES IDENTIFIED AS THRUST AREAS

                    Agro Based Industries :

   Horticulture – Based Units

   Biotechnology Based Units

   Medicinal Plants, Tea and Rubber

                       Animal Husbandry and Meat Processing Industries

         Development of Mineral based Industries:

      Coal-Based Industries

     Limestone Based Industries- Cement Plants, Lime Plants,

                      Calcium Carbide   Plants.

                       Electronics & Information Technology

INCENTIVES FOR LARGE AND MEDIUM SCALE INDUSTRIES

•        For large and medium scale industries, there are subsidies like capital investment subsidy, interest subsidy, power subsidy, subsidy on cost of pollution/quality-control measures, special subsidy for pioneer units in backward areas etc.

•        Exemption from the payment of applicable service tax for seven years to a "Tourism Unit"

•        Sales Tax exemption on sale of finished products for a period of seven years from the date of commercial production.

•        Reimbursement of Central Sales Tax (CST) paid on purchase of Capital Equipment installed till the date of project commissioning.

•        Partial exemption for applicable stamp duty.

INVESTMENT POLICIES

Meghalaya Government has always endeavored to set up the right kind of business climate to motivate investments in the State. In order to attract investment to the various sectors and thus contribute to the development of the economy as a whole.

The major being the industrial policy, which had been announced with a view to take advantage of the liberalized economic scenario in the country and also to keep pace with development in the national industrial sector are-

•        Generate employment opportunities for the local people in the industries and allied sectors

•        Develop human resources and bring about improvements in the quality of life by promoting industries in sectors where the state has comparative advantage. Create a conducive environment for industrial development by creation of the basic Infrastructural facilities and by setting up of industrial areas, growth centre and export promotion industrial park.

•        Provide preference to local Entrepreneurship in setting up of large, medium and small-scale units.

•        Promote local interests through joint ventures with external investors so as to facilitate technology transfer and capital flow by a package of suitable incentives.

•        Encourage setting up of export-oriented, Agro based, Mineral-based, Horticultural based and Electronic units as thrust area.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 61 of 165 | Total 1645 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 61 164 165   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Chokes and Patti

Choke is a simple device used in fluorescent lamp circuits to provide a H.V. Sure across the lamp electrodes during starting to initiate discharge through the low pressure gaseous medium between the two electrodes. It also limits the current during normal operation after the discharge has been established. Choke also called as ballast, consists of highly inductive insulated wire wound over sheet iron lamination enclosed in sheet metal covering. In electronics, a choke is an inductor used to block higher-frequency alternating current (AC) in an electrical circuit, while passing lower-frequency or direct current (DC). A choke usually consists of a coil of insulated wire often wound on a magnetic core, although some consist of a doughnut-shaped "bead" of ferrite material strung on a wire. The choke's impedance increases with frequency. Its low electrical resistance passes both AC and DC with little power loss, but it can limit the amount of AC due to its reactance. The F.T. Patties are manufactured as per the OEM specifications only is galvanized steel sheet material of 18 swg to 20 swg sheet thickness and channel width=48mm, channel depth=15mm. The fixing hole, are well specified for chokes, starter, holders and other purposes that these patties are made in mild steel sheets which don't easily deform under simple handlings. These are painted bright with Aluminium paints or zinc plated for attractive appearances.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Nursing Home

Nursing homes are a type of residential care that provide around-the-clock nursing care for elderly people. Twenty-four-hour nursing care is available. Nursing homes will provide short-term rehabilitative stays following a surgery, illness or injury which may require physical therapy, occupational therapy or speech-language therapy. Nursing homes offer other services such as planned activities and daily housekeeping services. Nursing homes may also be referred to as convalescent care, skilled nursing or a long-term facility. Nursing homes may offer memory care services or have a separate area specified for memory care. Some nursing homes are set up like a hospital. The staff provides medical care, as well as physical, speech and occupational therapy. There might be a nurses' station on each floor. Other nursing homes try to be more like home. They try to have a neighborhood feel. Often, they don't have a fixed day-to-day schedule, and kitchens might be open to residents. Staff members are encouraged to develop relationships with residents. Most nursing homes have nursing aides and skilled nurses on hand 24 hours a day. The market size of hospitals and nursing homes will be Rs 54,000 crore with 20 per cent growth rate per annum; medical equipment Rs 9,000 crore with 15 per cent growth; clinical lab diagnostics Rs 9,000 crore with 30 per cent growth. In FY17, Indian healthcare sector stood as the 4th largest employer as the sector employed a total of 319,780 people. Rising income levels, ageing population, growing health awareness and changing attitude towards preventive healthcare is expected to boost healthcare services demand in future.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Filter (for All Vehicles)

Filters containing an absorbent or catalyst such as charcoal (carbon) may also remove odors and gaseous pollutants such as volatile organic compounds or ozone. A particulate air filter is a device composed of fibrous materials which removes solid particulates such as dust, pollen, mould, and bacteria from the air. Filters containing an absorbent or catalyst such as charcoal (carbon) may also remove odors and gaseous pollutants such as volatile organic compounds or ozone. Air filters are used in applications where air quality is important, notably in building ventilation systems and in engines. Automotive filter remove the solid matters such as dust, mould and pollen from the fuel and gas. Automotive filters help the engine to run smoothly and ensure that there is adequate air flow to the engine which further lessens the fuel consumption and carbon emission. High research & development and collaboration between companies have been seen as an emerging trend across the global automotive filter market. The global automotive filters market is expected to intensify in the near future. The fragmented nature of competitive landscape likely to remain so due to an unstoppable influx of new players. An automotive filter aids in extending engine life, as it competently traps dirt and debris that damages the internal parts of an engine such as pistons and cylinders. A small particle of salt can damage the engine, which further entails high repairing cost. Automotive filters enables proper air flow to the engine, thus maintaining optimal combustion through appropriate air-fuel mixture.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Ayurvedic Pain Balm (Ointment)

Ayurvedic pain balm helps in balancing the blood circulation and reducing the inflammation. Inflammation can be caused by building up of toxins under the skin and Ayurvedic ointment for muscle pain helps in getting rid of them. Ayurveda, the traditional Indian medicinal system remains the most ancient yet living traditions with sound philosophical and experimental basis. It is a science of life with a holistic approach to health and personalized medicine. It is known to be a complete medical system that comprised physical, psychological, philosophical, ethical, and spiritual health. In Ayurveda, each cell is considered to be inherently an essential expression of pure intelligence hence called self-healing science. In addition, to the self-healing concept, the use of herbal treatment is equally important in this Indian traditional system of medicine.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Electronic Cut Out For Automobile

Electronic cut-out is an electronic protection which can charge and discharge the battery as per the alternator requires current. A pair of wire is mounted on the cut-out, called as phase and neutral which comes from the alternator discharged from the alternator and pases through the circuit of the cut-out. As the speed of the alternator increases and its terminal voltage rises, current will flow from the alternation to battery through electronic cut-out. When the output voltage exceeds the predefined voltage, which is adjusted before at potentiometer, then the cut-out does not allow the battery to charge again. The current flow through the cut-out will be grounded. Again when the alternator voltage decreases compare to the battery voltage, then the battery will start supply the current to the alternator. The supply of the battery current will continue till the voltage of the alternator rises to its pre-define value. The cut out has no part in varying the rate of charge of the alternator, its only function being to connect the battery to the changing circuit as soon as the alternator terminal voltage rises above that of the battery, and to disconnect the battery when the alternator terminal voltage falls below this level. If the cut out contacts remain closed with the alternator stationary, a heavy current will flow from the battery through the alternator armature and will very quickly burn out the armature conductors. For this reason it is extremely unwise to close the cut-out contact whilst the engine of the vehicle is stationary.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Pressure Die Casting

Pressure die casting is a quick, reliable and cost-effective manufacturing process for production of high volume, metal components that are net-shaped have tight tolerances. Basically, the pressure die casting process consists of injecting under high pressure a molten metal alloy into a steel mold (or tool). This gets solidified rapidly (from milliseconds to a few seconds) to form a net shaped component. It is then automatically extracted. Die casting process is preferred for nonferrous metal parts of intricate shapes. Examples of products are automobiles appliances, hand tools, computer peripherals, toys, optical and photographic equipment etc. Advantages of Pressure Die Casting: • Lower costs compared to other processes. • Economical - typically production of any number of components from thousands to millions before requiring replacement is possible. • Castings with close dimensional control and good surface finish • Castings with thin walls, and therefore are lighter in weight Depending upon the pressure used, there are two types of pressure die casting namely High Pressure Die Casting and Low Pressure Die Casting. While high pressure die casting has wider application encompassing nearly 50% of all light alloy casting production. Currently low pressure die casting accounts for about 20% of the total production but its use is increasing. High pressure castings are must for castings requiring tight tolerance and detailed geometry. As the extra pressure is able to push the metal into more detailed features in the mold. Low pressure die casting is commonly used for larger and non-critical parts.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Solar Water Heater

Solar water heater is a device that can be used to capture sunlight in order to heat the water in your pipes to be used for baths, showers, etc. Solar water heater or SWH comprises a solar panel, inverter system, and a water storage tank. The sunlight that falls on the solar panels is used to heat the water inside the insulated storage tank either through a pump or directly through the thermosyphon principle. In the thermosyphon principle, fluid circulation is based on natural convention, where warm water rises and is replaced by cold water. Some of the advantages of SWHs over CWHs are: cost-effectiveness and reduced dependence on other fossil fuels. SWHs are generally installed on the roof of a building where the intensity of sunlight is maximum throughout the day. The market for solar water heaters in India is expected to reach INR 1369 crore till 2021. Karnataka and Bangalore are having maximum share in India. In India the SWH market has been through many ups and downs. The market changes drastically in some year, remains stable for a while and then again decreases as shown in the below graph. In solar water heaters the residential sector is driving the market. Residential sector has penetrated almost 80% in the market. Industries and other commercial institutes are also picking up solar water heater as a better option. Electric water heaters are still dominating the market, but solar water heater is also growing rapidly to make a considerate share in the water heater market. Global Solar Water Heater Market is projected to exceed USD 4 billion by 2024, growing demand for environment friendly, cost effective and reliable systems for water heating purposes across commercial, industrial, and residential sector will augment the solar water heater market. Ability to reduce electricity bill by 50% to 80% will encourage the product penetration over the forecast timeline.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Corrugation Gum Powder (Adhesive- Dry Powder)

Adhesives market in India is forecast to cross US$ 1.3 billion by 2025, on account of continuously growing building and construction sector, increasing demand for packaging materials in food & beverage industry and growing furniture industry. Growth in India adhesives market can also be attributed to macroeconomic factors such as increasing population base, rising per capital income and rapid industrialization. Moreover, rising technological advancements have led to development of advanced and hybrid adhesives that have excellent bonding strength and flexibility, under a wide range of temperatures. Rising awareness about different types of adhesives and their applications in various end user industries is projected to boost demand for adhesives in India during 2016-2025. Corrugation Gum Powder are used in corrugated box manufacturing industry. It is a cold water soluble adhesive powder for corrugation work in corrugated box and board making.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

How to Start a Mini Cement Plant. Cement Manufacturing Industry. Cement Business.

India is the second largest producer of cement in the world. No wonder, India's cement industry is a vital part of its economy, providing employment to more than a million people, directly or indirectly. India has a lot of potential for development in the infrastructure and construction sector and the cement sector is expected to largely benefit from it. Some of the recent major initiatives such as development of 98 smart cities are expected to provide a major boost to the sector. The most common use for cement is in the production of concrete. Concrete is a composite material consisting of aggregate (gravel and sand), cement, and water. As a construction material, concrete can be cast in almost any shape desired, and once hardened, can become a structural (load bearing) element. Uses: Cement is indispensible for building and construction work and cement industry is considered to be an important infrastructure core industry. It is one of the most advanced industries of India. In a developing country like India, the cement industry can play a significant role in the overall economic growth. • Building (floors, beams, columns, roofing, piles, bricks, mortar, panels, plaster) • Transport (roads, pathways, crossings, bridges, sleepers, viaducts, tunnels, stabilization, runways, parking) • Water (pipes, culverts, kerbing, drains, canals, weirs, dams, tanks, pools) • Civil (piers, docks, retaining walls, silos, warehousing, poles, pylons, fencing) • Agriculture (buildings, processing, housing, feedlots, irrigation) The housing sector is the biggest demand driver of cement, accounting for about 67 per cent of the total consumption in India. The other major consumers of cement include infrastructure at 13 per cent, commercial construction at 11 per cent and industrial construction at 9 per cent. The Indian cement industry is dominated by a few companies. The top 20 cement companies account for almost 70 per cent of the total cement production of the country. A total of 188 large cement plants together account for 97 per cent of the total installed capacity in the country, with 365 small plants account for the rest. Of these large cement plants, 77 are located in the states of Andhra Pradesh, Rajasthan and Tamil Nadu. India’s total cement production capacity is nearly 425 million tonnes. The growth of cement industry is expected to be 6-7 per cent in 2017 because of the government’s focus on infrastructural development. The industry is currently producing 280 MT for meetings its domestic demand and 5 MT for exports requirement. The country's per capita consumption stands at around 225 kg. It accounts for 6.9% of the world’s cement output. India’s cement production capacity is expected to reach 550 million tonnes by 2025. The industry provides employment to more than a million people directly or indirectly. In a country like India, the demand for cement is derived chiefly from the housing sector. One-fourth of the demand comes from the infrastructure sector and about 10-15% demand is generated from the commercial construction sector. The cement market is expected to soon witness an annual increase in demand, which could exceed supply, with the recent decline in capacity addition, especially in Asia Pacific (APAC) countries such as India. This may also prepare a platform for an imposing price appreciation in the future. However, new government regulations or changes in the nation’s financial system could affect the demand; for instance, the recent demonetization in India. Nevertheless, even with a small revival in the cement industry, the volume growth is anticipated to improve. The cement industry immensely relies on construction and building activities. Concrete and mortar are two of the most common products in the construction industry that use cement as a major ingredient. Any escalation in the global construction or building activities will spur the market largely. Other factors that could influence the rise in the worldwide market include escalating number of nuclear families, rising need for accommodation, development in technology, and excessive disposable income. See more https://goo.gl/Wmc5Jx https://goo.gl/Ua1z8M https://goo.gl/R9fhdq Contact us: Niir Project Consultancy Services An ISO 9001:2015 Company 106-E, Kamla Nagar, Opp. Spark Mall, New Delhi-110007, India. Email: [email protected] , [email protected] Tel: +91-11-23843955, 23845654, 23845886, 8800733955 Mobile: +91-9811043595 Website: www.entrepreneurindia.co , www.niir.org Tags Cement Manufacturing, Cement Plant, Mini Cement Plant, Process of Cement Manufacturing, Cement Manufacturing Process, Cement Manufacturing Plant Cost, Cement Manufacturing Process Pdf, Cement Manufacturing Process Flow Chart, Cement Factory, Cement Plant in India, Manufacturing of Cement PPT, I Want to Set up a Cement Industry, Cement Company, Cement Manufacturing Project Report, Cement Manufacture, Cement Manufacturing Business, Cement Manufacturing Industry, Cement Industry, How Cement is Made? Cement Manufacturing Business Plan, Cement Manufacturing Factory, Cement Manufacturing Company, Cement Production, Indian Cement Industry, Manufacturing of Cement, Production of Cement, Cement Production Process, How to Start a Cement Business, How to Start a Small Cement Factory, How to Start Cement Manufacturing Industry in India, Cement Plant Setup Cost, Cost for Setting up a Small Cement Manufacturing Plant, Business Opportunities in Construction Industry, Cement Manufacturing project ideas, Projects on Small Scale Industries, Small scale industries projects ideas, Cement Manufacturing Based Small Scale Industries Projects, Project profile on small scale industries, How to Start Cement Manufacturing Industry in India, Cement Manufacturing Projects, New project profile on Cement Manufacturing industries, Project Report on Cement Manufacturing Industry, Detailed Project Report on Cement Production, Project Report on Cement Production, Pre-Investment Feasibility Study on Cement Production, Techno-Economic feasibility study on Cement Production, Feasibility report on Cement Production, Free Project Profile on Cement Production, Project profile on Cement Production, Download free project profile on Cement Production, Startup Project for Cement Production, Project report for bank loan, Project report for bank finance, Project report format for bank loan in excel, Excel Format of Project Report and CMA Data, Project Report Bank Loan Excel
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Start Your Own Water Park, Amusement Park Business

Start Your Own Water Park, Amusement Park Business Features Water Play areas such as Swimming Pools, Water Slides, Splash Pads, Water Playgrounds, Lazy Rivers, as well as areas for Bathing, Swimming, and Other Barefoot Environments. A water park is one of the most visited places when it comes to leisure and entertainment. Water parks want to offer the most attractive, exciting, and appealing rides. Ideally, a water park has attractions ranging from Thrill rides to family slides to kids play area making it popular amongst people of all ages and walks of life. Amusement water parks generally feature a few water rides, such as the log flume, bumper boats, and rowing boats. Such rides are usually gentler and shorter than roller coasters and many are suitable for all ages. Water rides are especially popular on hot days. The Water Parks industry has made a big splash over the five years to 2017. Increased consumer spending has played into the industry's growth as consumers splurged on discretionary items such as water park tickets. Waterpark related development is expected to grow in 2017, with over 40 expansions and new facilities opening. The waterpark industry continues to expand in North America, with more than $550 million worth of new investment in indoor and outdoor waterparks and their related resorts in 2016. Waterpark related development is expected to grow in 2017, with over 40 expansions and new facilities opening. Every year industry is seeing 15-20 percent growth in the sector – be it expansion of existing parks or the setting up of new ones. The Industry has been growing at a compounded annual growth rate (CAGR) of more than 17.5 percent with annual revenue of approx. INR 17 billion and estimated to grow to at least INR 40 billion by 2020. The waterpark industry continues to grow bigger and better. Slides, rides and attractions become more impressive, and both municipal and private parks seek to attract more people with large numbers of rides, attractions and amenities. Properly located and well-managed indoor and outdoor waterparks achieve strong revenues and net income. List of Few Major Water Parks in India • The amusing lake in Nicco park area, in Kolkata, West Bengal • Accoland, Guwahati • Amaazia, Surat • Anandi Water Park, Lucknow, Uttar Pradesh • Appu Ghar • Aqua Marina Water Parks and Resorts, Kolkata • Aqua Village, Pinjore • Aquamagica, Adlabs Imagica, Khopoli • Aquatica, Kolkata • Bellilious Park, Kolkata • Black Thunder, Mettupalayam, Tamil Nadu • Dash n Splash, Chennai, Tamil Nadu • Dolphin the Water World, Agra (U.P.) • Dream World, Thrissur, Kerala • Fantasy Park, Palakkad, Kerala • Fantasy World, Kolkata • Fun N Food Village, Gurgaon, New Delhi • Fun N Food Park, NAGPUR, • Funcity, Panchkula • Funtasia Water Park, Patna • Jal Vihar, Hyderabad • Juckies, Kannur, Kerala • Jungle Water Park, Kanpur, Uttar Pradesh • Blue World, Mandhana, Kanpur • Sports Village, Bithoor, Kanpur • Ekta Water Park, Kanpur • Hungama World, Patna • Water Island (Fantasy Motels), Kanpur Lucknow Hwy, Unnao • Kishkinta, Chennai • Manasa Water Park, Mangalore • Merry Kingdom, Kannur, Kerala • Nature Park, Kolkata • Nicco Park, Kolkata • Ocean Park, Hyderabad • Pink City Water Park, Jaipur • Rose Valley Amusement Parks, Kolkata • Sentosa, Pune • Savin Kingdom, Siliguri, West Bengal • Somanipuram Adventure Park, Indore • Splashdown Waterpark Goa, Anjuna, Goa • Splash-The Water Park Delhi, Alipur, Delhi • Splash-The Fun World Ahmedabad, Ahmedabad, Gujarat • Splash-The Suncity Gwalior, Gwalior, Madhya Pradesh • Splash-The Resorts Hisar, Hisar, Haryana • Splash Water World, Rohtak, Haryana • Tikuji-Ni-Wadi, Thane, Maharashtra • Vanraj water park, Junagadh, Gujarat • Vismaya, Kannur, Kerala • Water Kingdom, Gorai, Mumbai • Wet N' Joy Water Park, Lonavala • Wonderla, Kochi, Bangalore and Hyderabad • Worlds of Wonder Water Park, Noida • Shanku's Water Park & Resort, Mehsana Gujarat • Swapna srushti water park, Gandhinagar Gujarat • Heaven water world, Gondal Gujarat Amusement and Water Parks are spread across the geography of our country and attracts around 30 million visitors per annum. Visitors to these amusement parks are mostly local constituting around 80 percent and the other 20 percent is corporate and large groups. Amusement parks are an essential part of the global leisure and entertainment industry. The industry can be broadly categorized into amusement parks, theme parks and water parks. The sector can also be largely segmented on the basis of the catchment area that they cater to, along with the type and scale of activities they offer. Tags Water Park, Waterpark Industry, Amusement and Water Parks, How to Open Water Park, How to Start a Waterpark, How to Start an Amusement Park, Starting a Water Parks & Slides Business, Water Park Equipment, Water Park Project, Cost to Build a Water Park in India, Small Water Park Cost in India, Water Park Project Report Pdf, How to Open a Water Park In India, Water Parks in India, How to Start an Amusement Park Business, Amusement Park Business Plan, Water Park Investment Cost, Water Park Feasibility Study, Water Park Business Opportunity in India, Profitable Water Park?, Profitable Business Ideas in Services Sector, Mini Water Park, Business Plan of Entertainment Park, Leisure & Entertainment Industry, Project Report on Water Park, Profitable Entertainment Business Ideas, Family Entertainment and Amusement Business Ideas, Starting an Amusement & Theme Park, Business Plan of Entertainment Park, Free Water Park Business Plan, Amusement Park Cum Water Park, Theme Park project ideas, Projects on Small Scale Industries, Small scale industries projects ideas, Water Park Based Small Scale Industries Projects, Project profile on small scale industries, How to Start Theme Park in India, Theme Park Projects, New project profile on Theme Park, Project Report on Theme Park Industry, Detailed Project Report on Amusement Park, Project Report on Water Park, Pre-Investment Feasibility Study on Theme Park, Techno-Economic feasibility study on Amusement Park, Feasibility report on Water Park, Free Project Profile on Amusement Park, Project profile on Water Park, Download free project profile on Amusement Park, Startup Project for Water Park, Project report for bank loan, Project report for bank finance, Project report format for bank loan in excel, Excel Format of Project Report and CMA Data, Project Report Bank Loan Excel, Start Your Own Water Park, Amusement Park Business, Small Water Park Cost
Plant capacity: 1000 visitors / DayPlant & machinery: 84 Lakh
Working capital: -T.C.I: 362 Lakh
Return: 41.00%Break even: 38.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 61 of 165 | Total 1645 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 61 164 165   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top