Google Search

Search

Already a Member ?

Best Business Opportunities in Jharkhand- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mining & Minerals: Project Opportunities in Jharkhand

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

The newly carved out resource rich State of Jharkhand is widely acclaimed as the region of the future, having immense potential for industrialisation with its large deposits of minerals which could provide a firm launching pad for various industries.

RESOURCES:

Jharkhand is one of the richest zones of minerals in the world. The 40% of the total minerals of the country are available in this state. The State is the sole producer of cooking coal, uranium and pyrite. It ranks first in the production of coal, mica, kyanite and copper in India. The geographical exploration and exploitation of gold, silver, base metals, decorative stones, precious stones, etc. are the potential areas of the future. Jharkhand is also endowed with other resources such as surface and ground water, land with immense bio-diversity, moderate climate, disciplined and skilled manpower, adequate availability of power, which are the basic essentials for the growth and development of industries.

GOVERNMENT POLICIES:

Jharkhand region is generously endowed with Mineral Wealth and the State Government is committed to create an environment conducive to the growth of Mining and Mineral based Industries in the State. In view of this, the State's Industrial policy covers certain clauses relevant for Mining and Mineral sector, which are enumerated below:

•        Simplify procedures and expedite granting of mining leases.

•        Provide certain relief to make mining activities easier.

•        Encourage use of modern exploration techniques to set up a resource inventory of various minerals in the State.

•        Encourage joint venture projects with SMDC.

•        Clear mining lease applications and project report within 60 days.

•        Encourage foreign investment and technological collaboration by OCBs and NRIs in selected sectors including Mineral development.

•        Encourage Private Sector participation in Mining Activities

Jharkhand State Mineral Development Corporation Ltd. was incorporated on 7th May, 2002 after bifurcation from Bihar State Mineral Development Corporation Ltd. JSMDC is a Government of Jharkhand Undertaking under the Dept. of Mines & Geology, Govt. of Jharkhand. It is premier producer and supplier of minerals and mineral based products in the State of Jharkhand. Core business of the Company is production and marketing of coal, limestone and its powder, kyanite, graphite, granite blocks and manufacturing of granite tiles of smaller dimensions. JSMDC is a consistently making profit company. Annual turnover is more than 100 Crores in the current fiscal year.

 

 

 

Agro-Based Industries: Project Opportunities in Jharkhand

 

 

PROFILE:

 

Agro-based industry would mean any activity involved in cultivation, under controlled conditions of agricultural and horticultural crops, including floriculture and cultivation of vegetables and post-harvest operation on all fruits and vegetables. The development of agro-industries has assumed crucial importance in the economic planning and progress of the country. The agro industry is regarded as an extended arm of agriculture. The development of the agro industry can help stabilise and make agriculture more lucrative and create employment opportunities both at the production and marketing stages. The broad-based development of the agro-products industry will improve both the social and physical infrastructure of India. Since it would cause diversification and commercialization of agriculture, it will thus enhance the incomes of farmers and create food surpluses. The state of Jharkhand having diversified agro-climatic conditions is much suited for the development horticulture based economy that has ample scope for its growth.

RESOURCES:

The agro-climatic conditions of the State are conducive for commercial cultivation of large varieties of fruits, vegetables,flowers and medicinal and aromatic plants. Plantation and Horticulture is one of the important sub sectors of Agriculture having ample scope for expansion in the state of Jharkhand. The state of Jharkhand has a total geographical area of 79.7 lakh ha out of which cultivable land is 38 lakh ha. The net irrigated area is only 1.57 lakh ha which is only 8% of the net sown area. The total area occupied for plantation and horticulture crop in the state is about 2.57 lakh hectares. Different kinds of fruits are grown in Jharkhand. The crops grown in Jharkhand are Mango, Litchi, Stone fruit (Peach), Citrus (Lime/Lemon), Awla and Papaya in fruits, Chilli, Turmeric and Ginger in spices, Rose, Marigold, Gerbera, Carnation and Gladiolus among flowers, Lemon grass, Palmarosa and Rosa damascena in aromatic plants, Cashew in Plantation crops. Jharkhand endowed with vast impounded fresh water resources in the form of tank/ponds and reservoirs. The major plantation crops cultivated in the State are cashew nut and coconut. The Board has identified the State as high potential State for coconut cultivation as the average productivity of coconut palm is 36 nuts per palm, which is above the national average of 34 nuts. Cashew nuts popularly known as a gold mine of wastelands is very ideal for cultivation in wastelands and hence there is good potential for cashew cultivation especially in East and West Singhbhum districts. Tea plantation in a small measure has been taken up in Ranchi district, which has a favourable climate for growing tea.

 

 

 

GOVERNMENT POLICIES:

 

 The promotion of Agro-based industries is among the priorities of the State Government. The state has assured supply of fruits & vegetables grown by applying scientific techniques, investment in post harvest and good transport infrastructure. The National Horticulture Mission (NHM) in the Jharkhand State was launched in late 2005-06 initially in 10 districts with main focus on production of planting materials, vegetable seed production, establishment of new gardens, creation of water resources etc. Establishment of new gardens include perennial and non perennial fruits, spices, floriculture, aromatic and medicinal plants. This scheme was 100 % sponsored by Central Govt. during 2005-06 and 2006-07 (Xth Five Year Plan). However, during 2007-08 and onwards (XIth Five Year Plan) this scheme has been implemented in 15 districts with the pattern of assistance as 85:15 by Central Govt. and State Govt. respectively. The Jharkhand government has decided to set up a food park to kick off the development of the food processing sector in the state and attract investors. In general very few small scale food processing industries are present in the state.

 

 

 

 Sericulture (Tasar Silk): Project Opportunities in Jharkhand

 

PROFILE:

Sericulture is an agro-based industry. It involves rearing of silkworms for the production of raw silk, which is the yarn obtained out of cocoons spun by certain species of insects. The major activities of sericulture comprises of food-plant cultivation to feed the silkworms which spin silk cocoons and reeling the cocoons for unwinding the silk filament for value added benefits such as processing and weaving. Silk is a fine strand of fiber that is a solidified secretion produced by certain caterpillars to encase themselves in the form of cocoons. India is second largest producer of silk. Sericulture industry is looking out for the developments of young age silk worm rearing or chawki rearing. Care of silk worms start from the stage of procurement of silk worm eggs from the grainage itself. Silk worm eggs are distributed to the farmers for commercial rearing when active development of embryo is in progress. The important aspect of young silkworm rearing management are a suitable separate rearing house or room, well maintained mulberry garden with assured irrigation facilities. Sericulture has emerged as a virtual lifeline and a profitable employment avenue for villagers in Maoist-affected areas in India's eastern Jharkhand. Under the aegis of the Jharkhand state industrial department, farmers are beginning to rear silkworms.

RESOURCES:

Jharkhand, much like Chattisgarh and Uttaranchal, is endowed with adequate forest cover. These forests are home to two species of trees -Arjuna (Terminalia Arjuna) & Asan (Terminalia Tomentosa) which are breeding ground for the moth which produces the cocoon from which Tasar yarn is reeled. Jharkhand's forest department is also planning to encourage planting of Arjuna trees in place of the traditional Acacia or Eucalyptus trees. Tussar Food plants are available over an area of 9 lakh hectares. The Singhbhum and Santhalpargana regions are the main silk producing centres in the State. The State is promoting this activity through 28 pilot project centres situated in different areas. Each rearer can rear on an average 200 eggs or Disease Free Laying (DFLs) so the annual demand of commercial seed or egg is of 130 lakh. There are three types of seeds or eggs – Nucleus, Basic seed and Basic seed multiplied to commercial seed.

GOVERNMENT RESOURCES:

Tasar culture is a backbone for Tribal development, and the Government of India, through the Central Silk Board and different State Governments have initiated several developmental and welfare measures for the tribal welfare through it. Jharkhand's forest department is also planning to encourage planting of Arjuna trees in place of the traditional Acacia or Eucalyptus trees. Jharkhand Sericulture Development Institute (JSDI) and Jharkhand Silk Technical Development Institute (JSTDI) are being strengthened to give an impetus to this sector. During the year 2010-11, it is proposed to rear 2.35 lakh tasar nucleus DFLs, 16 lakh of tasar basic DFLs and 96 lakh of commercial DFLs through seed and commercial rearers in the State. It is proposed to be benefited 40,000 -50,000 Tasar farmers through Tasar seed production and its rearing during the year.

 

Steel Industry

 

PROFILE:

Steel Industry is a booming industry in the whole world. India’s economic growth is contingent upon the growth of the Indian steel industry. Consumption of steel is taken to be an indicator of economic development. While steel continues to have a stronghold in traditional sectors such as construction, housing and ground transportation, special steels are increasingly used in engineering industries such as power generation, petrochemicals and fertilisers. Indian Steel Industry is more than a century old. India has now emerged as the eighth largest producer of steel in the world with a production capacity of 35MT. Almost all varieties of steel is now produced in India. India has also emerged as a net exporter of steel which shows that Indian steel is being increasingly accepted in the global market. The growth of the steel industry in India is also dependant, to a large extent, on the level of consumption of steel in the domestic market. Steel consumption is significant in housing and infrastructure. In recent years the surge in housing industry of India has led to increase in the domestic demand for steel.

 

 

RESOURCES:

Jharkhand emerges as hub for steel companies. The state is endowed with deposits of Iron Ores of both, Hematite & Magnetite. The Hematite deposits are mainly located in the West Singhbhum District and have a resource base exceeding 3700 Million Tonnes. These have been explored only in pockets by large industry houses in their lease hold. There is a very good scope of enlarging this resource base by further exploration. The Magnetite Deposits are located in the East Singhbhum, Latehar & Palamu districts. They comprise lenticular ore bodies as well as Schist rocks with 80 to 36% magnetic. The exploration of these bodies is yet to be taken up. The existing steel mills are sourcing their iron ore (Hematite) from West Singhbhum. The Magnetite ore is being used in heavy media coal washeries & paints. Tata Steel's largest plant is located in Jamshedpur, Jharkhand, with its recent acquisitions; the company has become a multinational with operations in various countries. If the interest shown by all the companies, big and small, in Jharkhand's iron ore deposits translates into reality, the state will produce more than half the total steel in India. First Iron & steel factory  is located at Jamshedpur and Largest Steel plant in Asia is Bokaro steel plant.

 

GOVERNMENT POLICIES:

Under the new industrial policy, iron and steel has been made one of the high priority industries. Price and distribution controls have been removed  as well as foreign direct investment up to 100% (under automatic route) has been permitted.  The Trade Policy has also been liberalized and import and export of iron and steel is freely allowed with no quantitative restrictions on import of iron and steel items. Tariffs on various items of iron and steel have drastically come down since 1991-92 levels and the government is committed to bring them down to the international levels.  With the abolishing of price regulation of iron and steel in 92, the steel prices are market determined. The policy devises a multi-pronged strategy to achieve these targets with following focus areas; removal of supply constraints especially availability  of critical inputs like iron ore; improve cost competitiveness by expanding and strengthening the infrastructure in roads, railways, ports and power; increase exports; meet the additional capital requirements by mobilizing financial resources; promote investments by removing  procedural delays. In addition the policy also addresses challenges arising out of environmental concerns, human resource requirements, R&D, volatile steel prices and the secondary sector. 

 

Rural Industries: Project Opportunities in Jharkhand

 

PROFILE:

Rural industry is an important source of employment for workers shifting out of agriculture. The rural industry continues to play a significant role in the expansion ofemployment, improvement in productivity and earnings, and poverty reduction in many non-industrialized countries; this is particularly the case in India. This sector has immense export potential which needs to be exploited to earn foreign exchange. To give thrust, the government aims to provide benefits in the various areas such as handloom, handicrafts, khadi village industries, forest based industries etc.

RESOURCES:

Handloom is labour intensive cottage industry sector providing employment to around 1.5 lakh weavers throughout the State. Various incentives to the handloom weavers are being provided under Deendayal Hastkargha Protsahan Yojana, which aims attaking care of wide gamut of activities, such as basic inputs like looms and accessories, product development, infrastructure support, institutional support, training to weavers, supply of equipment and marketing support, both at micro and macro levels in an integrated and coordinated manner for an overall development of the sector and benefit to handloom weavers. Handicrafts of Jharkhand reflect the cultural heritage, customs and traditions of the State. The State manufactures handicrafts in cane and bamboo works, woodcarving, stoneware, brassware, Lac based handicraft items, paper mache, terracotta, etc. The State Government may set up a model suitable ‘Handicraft Village’ in each of the districts of the State for promoting the traditional arts and crafts of the villages by adopting the "One Tambon One Product" model of Thailand. Various forest produce available in the state are mahua seed, sal seed, shellac, bamboo, kendu leaf, harre, bahera, etc.

 

GOVERNMENT POLICIES:

Focus of the Rural Industrial Policy:-

1.       Providing ample employment opportunities through rural industries.

2.       Establishing rural industries and providing help on priority basis for skill enhancement, modern technology, and marketing especially for beneficiaries of scheduled caste, scheduled tribe, backward, and minority sections.

3.       Giving priority to participation of women in development of rural industries.

4.       Encouraging participation of private sector, non-governmental organizations, cooperative societies, and self help groups for development of rural industries.

5.       Implementing cluster approach.

6.       Value addition to the minor forest produce and medicinal herbs in the tribal areas of the state itself and passing on the benefits to the tribal population of the area.

7.       Connecting rural industries with E-commerce.

With the implementation of the Rural Industrial Policy, active participation of experienced craftsmen and industrialists in the field of handloom, handicraft, leather industry, other cottage industries and silk centers would be ensured for overall development of rural industries in the rural areas.

 

 

Tourism: Project Opportunities in Jharkhand

 

PROFILE:

Tourism is one of the fastest growing industries in the world. The number of tourists worldwide has been registering phenomenal growth and it is expected that this number would shortly touch 1.5 billion. Tourism contributes about 11% of the world work force and 10.2% of the global gross domestic products. The dynamic growth of this industry is evident from the fact that a new job is added to this sector every 2.5 second. Jharkhand is endowed with rich cultural heritage and bestowed liberally with bounties of nature. Various initiatives are being taken by the Government and other organizations to promote tourism here. Jharkhand is blessed with an exotic landscape: the rolling hills, beautiful plateaus, sparkling rivers, etc. that largely contribute towards tourism at Jharkhand. Besides, the national parks, wildlife sanctuaries, holy shrines and museums, etc. largely attracts tourists to come to Jharkhand.

RESOURCES:

Blessed with immense biodiversity, moderate climate, rich cultural and historical heritage, Jharkhand is fast emerging as an ultimate tourist destination in eastern India. Jharkhand Tourism Department is taking utmost initiative to promote tourism in Jharkhand. A good number of hotels run by Jharkhand Tourism and private hoteliers have come up at popular tourist spots, which cater to all segments of travellers. Several Jharkhand Tourism Information Centers have been opened up in various parts of the city. These information centers provide details about Jharkhand travel, hotels, tourist attractions, travel agencies, licensed Jharkhand tourism guides and other important travel tips to holiday makers. Some of the major tourist spots in Jharkhand that play a vital role in the tourism industry of Jharkhand are: Netarhat, Betla National Park, Baidyanath Dham so on. It is noteworthy in this context that Kanke Dam, Ranchi Hill, Tagore Hill, Hatia Dam, Dasham Falls, Jagannath mandir, Jonah Falls, Hoondru waterfalls, etc. are the projects under the Tourism Industry of Jharkhand that heavily contributes towards the economy of the State.

GOVERNMENT POLICIES:

Jharkhand has huge potential in tourism sector. The tourism potential of the state has not been exploited and at the same time tourist spots have not been highlighted at national and international level. Jharkhand government seems to be serious to promote tourism in the state. The State Government would set up a Jharkhand Tourism Development Board to facilitate enter departmental co-operation and coordination to promote Tourism in the State. This Board would be set up under the chairmanship of the Chief Minister of Jharkhand with the Tourism Minister as Vice-chairman and Principal Secretaries/Secretaries of other relevant departments as members. The Board would also have representatives of the Hotel Association, Travel Agents Association, Adventure Sports Operators Association, NGO's and other non-official members having outstanding contribution or expertise in the field of development and promotion of tourism industries. Financial assistance as grants-in-aid, etc would be provided (to this board). The Board would advise the Government to lay down the policy guidelines for the development and promotion of tourism industry in the State, to promote public-private partnership and public sector would undertake all steps to develop and promote tourism in the State.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 55 of 337 | Total 3361 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 55 336 337   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Banana Wafers - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Snack foods have become very popular among all age groups in India and its popularity is growing day by day. A variety of snack foods are presently available at reasonable prices but banana wafers have gained popularity during the past years. Banana Wafers are a popular snack eaten world over. It is high in saturated fat content. They are a tropical snack. These are hot, salty, crunchy fried plantain wafers. It is served as part of a traditional meal in South India. It is very popular in many countries in the tropical belt. It is an alternative to potato and corn wafer. Banana (Musa sp.) is the second most important fruit crop in India next to mango. Its year round availability, affordability, varietal range, taste, nutritive and medicinal value makes it the favorite fruit among all classes of people. It has also good export potential. They have great potential for growth due to their immense popularity and nutritional aspects. Fried banana wafers are a deep fried snack food prepared from green fresh mature bananas of the cooking variety. Though consumption of these products is at present very high there is no systematic quality control. The formulation of this standard is intended to assist in the manufacture and sale of standardized, nutritious, safer and more hygienically processed products. Fried banana wafers are prepared by peeling and slicing fully matured but unripe bananas and deep-fat frying the slices in suitable edible oil or fat, or combinations thereof. The bananas are sliced breadth wise to give thin circles that are dropped straight into the frying medium held at proper temperature for a time to render them crisp. Salt and other seasonings are added after frying. The product is commonly used in Hotels, Restaurants, Bars, and House etc. Banana wafers are made from unripe bananas. Wafers are crispy, salty or spicy and Consumers prefer fresh quality. Since they are made from banana, they have nutritious Values as well. The product needs to be packed in transparent polythene bags.
Plant capacity: Banana Wafers: 800 Kgs/DayPlant & machinery: Rs 20 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 121 Lakhs
Return: 24.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

Water Treatment Chemicals (R.O., Boiler and Cooling Tower) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

Water is the universal solvent and is invariably used for a wide variety of domestic and industrial purposes. The major industrial uses of water are steam generation, cooling, washing, and conveying of materials etc., Above all, it is the major raw material which will become an ingredient in the finished product. Of the many uses of water, steam production is considered as the most important as it is a means of power generation and of several industrial uses. Steam is used to drive turbines and for heating, and to operate pumps, compressors and reciprocating engines. Most chemical process industries require an uninterrupted supply of steam to be used for varied purposes. Water and its impurities are responsible for the corrosion of metals and formation of deposits on heat-transfer surfaces, which in turn reduce efficiency and waste energy. Having seen the effects of corrosion and deposits, let us see how this can be prevented. The path to their prevention can best be approached through understanding their basic causes, why and how they occur. Traditional processes for water treatment will thus consist of a coagulating process including a separation step in the form of flotation and precipitation and sedimentation including a filtering step, and in addition a step of water treatment for corrosion control purposes. Such traditional processes are, however, comprehensive and expensive with respect to processing of lime to so as achieve supply of the lime without leading to operation problems. The addition of lime usually takes place by dosage from a raw material container in the form of a lime silo via a worm conveyor to a slurry tank to dissolve the lime in water, and is then subjected to a post- treatment step in a lime water processing unit, prior to supply to the crude water to be treated.
Plant capacity: 4000 Kgs/DayPlant & machinery: Rs 86 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 495 Lakhs
Return: 30.00%Break even: 51.00%
Add to Inquiry Add to Inquiry Basket

Aluminium Beverage Cans - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

The aluminium beverage can is now the popular choice for carbonated and still soft drinks, mineral waters, beers and lagers. It competes successfully against drinks containers of glass, plastic and steel, and is the only drinks container for which closed loop recycling applies; a used aluminium drinks can is recycled back into aluminium can sheet for the manufacture of another aluminium drinks can. The good thermal properties of aluminium mean that the drinks can is quickly chilled. It has good rigidity and strength without the grave disadvantages of a glass bottle, of being fragile and dangerous when broken and much heavier than an aluminium can. It is lighter than steel and even a steel beverage can relies on aluminium for the top of the can since the better control on gauge and properties of aluminium mean that the easy open end of the can only be made in aluminium. Aluminium cans are most typical among metal containers. Canned foods are found in great abundance all around us, and include processed fisheries products such as crab, tunaa and sardine. Processed fruits, processed agricultural products such as sweet corn and asparagus, and daily products such as corned beef, cheese and butter. More recently, canned soft drink and bear are gaining popularity at a rapid pace in concert with the wide acceptance of automatic vending machine. Aluminium cans provide long-term food quality preservation benefits. Aluminium cans deliver 100 percent protection against oxygen, light, moisture and other contaminants Few Indian Major Players are as under • A M-Tech Packs Ltd. • Punsumi Foils & Components Ltd. • Shatrunjay Extrusions Ltd.
Plant capacity: Aluminium Beverage Cans : 1,000 thousand Nos/DayPlant & machinery: Rs 1663 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 2957 Lakhs
Return: 26.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

Plastic Injection Moulded Products (Buckets, Tumblers, Tubs & Toilet Bowl Cleaning Brush) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials

Injection moulding is one of the most important processes used in plastic articles manufacture in terms of volume thermo-plastics handled and the range of articles manufactured. Injection molding is the most versatile process for the manufacture of plastic products with various shapes, sizes, and dimensions. It continues to be the process of choice for the production of articles with complex three-dimensional (3-D) shapes. Injection molding has been used to produce articles based on composites, foams, rubber and thermosets, in addition to thermoplastics. In fact, in recent years, injection molding methods have been used to manufacture metallic and ceramic products. Many innovations have been introduced to improve the efficiency and versatility of the process and products, including gas and water assisted injection molding and micro-injection molding. The process of injection moulding can be applied with modifications to thermosetting materials also and differs from transfer moulding in that the plasticizing chamber contains enough material to fill the mould several times. The thermoplastics material in general used for injection moulding in clued polyethylene PVC polystyrene, polypropylene, polymethyl metacrylate PTFFZ polyamides, cellulose, derivatives polyurethanes, CAB and polycarbonates. The thermoplastics find numerous application as injection moulded goods. Few of them are given as under:- 1. Buckets 2. Battles 3. Goggles 4. Toys 5. Trays 6. Cycle seat. 7. Cabinets for radio transistors tape recorder T.V. and other electronic appliances Few Indian Major Players are as under • A B C O Plastics Ltd. • Bluplast Industries Ltd. • Bright Brothers Ltd. • Brite Automotive & Plastics Ltd. • Clear Mipak Packaging Solutions Ltd. • Fancy Fittings Ltd. • Mutual Industries Ltd. • National Plastic Inds. Ltd. • National Plastic Technologies Ltd. • National Polyplast (India) Ltd. • Nilkamal Ltd. • Peacock Industries Ltd. • Prima Plastics Ltd. • Synthetic Moulders Ltd. • Wim Plast Ltd.
Plant capacity: Moulded Products : 100 MT/ Day,Toilet Cleaner Brush : 5000 Nos/DayPlant & machinery: Rs 155 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 653 Lakhs
Return: 33.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

High Pure Dissolved Acetylene Gas - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Acetylene (C2H2) is known as one of the simplest and most significant chemical in the acetylene series. A compound of carbon and hydrogen, acetylene is a colorless, highly flammable gas that dissociates at normal to low pressures and needs to be stored in high-pressure tanks containing some porous material and acetone. It has active chemical property; it is easy to polymerize, synthesize and cause chemical reactions. Acetylene is the most common gas used for fueling cutting torches in both general industry and the mining industry. When mixed with pure oxygen in a cutting torch assembly, an acetylene flame can theoretically reach over 5700°F. Users of this type of equipment are generally familiar with the fire hazards associated hot flames and the production of hot slag. However, many users may not be aware of the unique characteristics of acetylene itself that create special hazards compared to other fuel gases. Physical Properties • Acetylene is a colorless gas. It has a garlic odor. The odor is due to presence of impurities of phosphorous and hydrogen sulphide. However, pure acetylene has pleasant odor. • It is insoluble in water but highly soluble in acetone and alcohol. Acetylene is transported under high pressure in acetone soaked on porous material packed in steel cylinders. • Its boiling point is –84°C. • It is lighter than air. It is somewhat poisonous in nature. • It burns with luminous flame and forms explosive mixture with air. Uses And Applications Acetylene has many commercial and technical applications. The most known application for acetylene is for oxyacetylene welding, cutting and heat treating. The majority of acetylene is use in the chemical synthesis process for the manufacturing of many organic compounds such as acetaldehyde and acetic acid. Few Indian Major Players are as under • Asiatic Gases Ltd. • Bombay Oxygen Acetylene Ltd. • Bombay Oxygen Gases Ltd. • Ellenbarrie Industrial Gases Ltd. • Mangalam Gases Ltd. • National Oxygen Ltd. • Premier Cryogenics Ltd. • Southern Gas Ltd. • Superior Air Products Ltd. • Vikas Industrial Gases Ltd.
Plant capacity: Acetylene Gas : 360 M3/ DayPlant & machinery: Rs 68 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 260 Lakhs
Return: 25.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

Fiber Optical Cables - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

An optical fiber (or optical fibre) is a flexible, transparent fiber made of extruded glass (silica) or plastic, slightly thicker than a human hair. It can function as a waveguide, or “light pipe”, to transmit light between the two ends of the fiber.Power over Fiber (PoF) optic cables can also work to deliver an electric current for low-power electric devices. The field of applied science and engineering concerned with the design and application of optical fibers is known as fiber optics. Optical fibers are widely used in fiber-optic communications, where they permit transmission over longer distances and at higher bandwidths (data rates) than wire cables. Fibers are used instead of metal wires because signals travel along them with less loss and are also immune to electromagnetic interference. Fibers are also used for illumination, and are wrapped in bundles so that they may be used to carry images, thus allowing viewing in confined spaces. Specially designed fibers are used for a variety of other applications, including sensors and fiber lasers. Fiber-optic communications is based on the principle that light in a glass medium can carry more information over longer distances than electrical signals can carry in a copper or coaxial medium or radio frequencies through a wireless medium. The purity of today’s glass fiber, combined with improved system electronics, enables fiber to transmit digitized light signals hundreds of kilometers without amplification. With few transmission losses, low interference, and high bandwidth potential, optical fiber is an almost ideal transmission medium. Few Indian Major Players are as under • Aksh Optifibre Ltd. • Birla Ericsson Optical Ltd. • Optel Telecommunications Ltd. • Spectra Punjab Pvt. Ltd. • Sterlite Telecables Ltd. • Tamilnadu Telecommunications Ltd.
Plant capacity: Fiber Optical Cables : 50 KMeters/DayPlant & machinery: Rs 3563 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 4266 Lakhs
Return: 19.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

Aluminium Foil Containers - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Aluminium is the most widely used non-ferrous metal and is extensively used in packaging materials. It is an excellent material for creating all types of containers. However, despite the fact that about seven billion aluminium foil containers are produced annually, most packaging engineers and packaging users know very little about the advantages that these containers bring to the packaging and food service industries. Aluminium foil containers are formed by combining mechanical and air pressure to force light gauge aluminium foil into a shaped die cavity. Esthetically appealing aluminium foil containers are ideal for table-ready service after the container has functioned first as a package and a heating utensil. Foil containers also come in a variety of colors and special purpose coatings. Moreover, its recyclability makes aluminium one of the most environment friendly materials on earth, a key advantage for planet conscious consumers and local governments. Additionally, recycled aluminium saves more than 95% of the energy necessary to produce new primary aluminium. Aluminium Foil Containers greatly used in daily life, it’s ideal for baking, grill, steaming, etc.,Commonly used in the kitchen, principally for the commercial preparation, packing and conveyance of foods. Often used in baking industry to contain food during the production and cooking phase. The food is subsequently conveyed and sold in the foil container. Today’s aluminium foil applications demonstrate the consumer friendliness. They vary from aseptic beverage cartons, wrappers, lids, blister and strip packs and more variations are in the pipeline. Also, aluminium foil is fully recyclable and modern separation techniques allow foil in household waste or separate collection systems to be extracted and recycled at a fraction of its original production energy. Very thin (laminated) foil based applications can also be incinerated with energy recovery. The aluminium foil industry in India was pioneered by India Foils, followed by Indian Aluminium Company. Currently, there are 4 major players who catering to the demand of the Indian market. The 4 major producers are, INDAL, India Foils, P G Foils, and Annapurna Foils. Thus, the aluminium foil industry is poised for spectacular growth in future.
Plant capacity: Aluminium Foil Containers Different Sizes : 1,475.0 Th.Nos./DayPlant & machinery: Rs 61 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 369 Lakhs
Return: 34.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Flexible Polyurethene Foam

During the past 40–50 years, foamed polymers have found increasing importance in the world market place due to the unique characteristics and properties they provide when compared to solid plastics. While most thermo sets and thermoplastics can be made in a foamed or cellular structure under certain conditions, the materials known as polyurethanes have become predominant for many applications in this field. Through the proper selection of the starting materials, foamed polyurethanes can range in characteristics from extremely soft, resilient cushioning products to very tough and rigid structural members. As varied as the products are, so too are the machines and processes used to produce them. Certain other systems, such as polyureas, are also processed with the same equipment as polyurethanes. The word polyurethane is somewhat misleading since, unlike most plastics, the final product is not made by polymerizing a monomer. Instead, the products contain a number of polyurethane groups in a complex structure that is controlled by the choice of starting materials and the production conditions. Polyurethane formulations cover an extremely wide range of stiffness, hardness, and densities. These materials include: • Low-density flexible foam used in upholstery, bedding, and automotive and truck seating • Low-density rigid foam used for thermal insulation and RTM cores • Soft solid elastomers used for gel pads and print rollers • Low density elastomers used in footwear • Hard solid plastics used as electronic instrument bezels and structural parts • Flexible plastics used as straps and bands The global polyurethane foam types are significantly penetrating their end-user industry market. These have different characteristics as per the manufacturing and their application requirement in the end products. The Asia-Pacific market is expected to dominate with its growing demand for polyurethane foams in different applications especially bedding & furniture, and building & construction. The polyurethane foam demand in terms of value and volume depicts the current and future projections according to the parallel economic and industrial outlook. This analysis covers major developments, expansions, agreements & mergers, and acquisitions of the leading global companies. As a whole it is a good project for new entrepreneurs for investment. Few Indian Major Players are as under • Arvind International Ltd. • Gandhigram Rubbers Ltd. • Harita Fehrer Ltd. • Harita Polymer Ltd. • Hind C-Bay Webtech Ltd. • M M Rubber Co. Ltd. • New Plastomers India Ltd. • Orion Laminates Ltd. • Packaging India Pvt. Ltd. • R T Packaging Ltd. • Sharp Industries Ltd. • Shroff Textiles Ltd. • Tirupati Foam Ltd. • Uflex Ltd. • Uma Polymers Ltd. • Victory Laminations Ltd.
Plant capacity: 15 MT/dayPlant & machinery: Rs 57 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 713 Lakhs
Return: 25.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Maize and its By Products (Maize Starch, Modified Starches & Animal Feed)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

Maize and its By Products (Maize Starch, Modified Starches & Animal Feed) Corn starch, corn flour or maize starch is the starch derived from the corn (maize) grain. The starch is obtained from the endosperm of the corn kernel. Corn starch is a popular food ingredient used in thickening sauces or soups, and is used in making corn syrup and other sugars. Starch or amylum is a carbohydrate consisting of a large number of glucose units joined by glycosidic bonds. This polysaccharide is produced by most green plants as an energy store. It is the most common carbohydrate in human diets and is contained in large amounts in such staple foods as potatoes, wheat, maize (corn), rice, and cassava. Starch is processed to produce many of the sugars in processed foods. Dissolving starch in warm water gives wheat paste, which can be used as a thickening, stiffening or gluing agent. The biggest industrial non-food use of starch is as adhesive in the paper making process. Starch can be applied to parts of some garments before ironing, to stiffen them. Maize Starch is a mixture of polysaccharides about 74% amylopectin and 26% amylose. It is a fine White Powder, odorless, taste slight and characteristic and microbiologically suitable as Pharmaceutical grade, useful in Pharmaceutical and Food Industry as a binder, thickener, disintegrating agents in tableting and various formulations. Starch derivative is a growing industry, and with technological advancements taking place, new products are being launched on a regular basis. The various stakeholders in the industry are the raw material suppliers, processors, and the product manufacturers. Starch derivatives are applied in food & beverages, feed, and non-food applications like, pharmaceutical, cosmetics, paper making, bioethanol, and other industrial applications. Asia-Pacific Holds the largest market share in the global starch derivatives market, by geography, and is also estimated to achieve the highest growth rate. Any entrepreneurs venture into this field will be successful. Few Indian Major Players are as under • Advanced Bio-Agro Tech Ltd. • Advanced Enzyme Technologies Ltd. • Anil Nutrients Ltd. • Aries Agro Ltd. • Aries Marketing Ltd. • Godrej Agrovet Ltd. • Hanuman Minor Oils Ltd. • Indo Euro Indchem Ltd. • Intercorp Biotech Ltd. • Jupiter Biotech Ltd. • K S E Ltd. • Kapila Krishi Udyog Ltd. • Kerala Feeds Ltd. • Maharashtra Agro-Inds. Devp. Corpn. Ltd. • Metahelix Life Sciences Ltd. • Origin Agrostar Ltd. • Pan Asia Global Ltd. • Rama Pashu Aahar Pvt. Ltd. • S O L Ltd. • Shalimar Pellet Feeds Ltd. • Snam Vijaya Feeds Ltd. • Sonitpur Solvex Ltd. • Sukhjit Starch & Chemicals Ltd. • Superhouse Ltd.
Plant capacity: Maize Starch : 37.50 MT/day•Modified Starch : 45 MT/day•Animal Feed:45 MT/dayPlant & machinery: Rs 1105 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 2894 Lakhs
Return: 26.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

RUBBER POWDER FROM WASTE TYRES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Rubber is polymer of butadiene and one of the most important chemical ingredients, which is widely used in the different field of modern advance world. Rubber is specially used in the tyre Industry, which is used in the different type of vehicles. Rubber products require rubber as a raw material. Either natural rubber, which is often cultivated on large plantations – with all the problems associated with a monoculture or alternatively synthetic rubber, which is produced using crude oil. Both processes use a high amount of resources. At the end of the chain, mountains of used car tyres crop up on the landscape. These waste sites are taken on by used tyre and rubber recycling plants nowadays. Waste tyre recycling technology is very cost effective and performs 100% wastage tyre recycling (No churn left after the process). In this process no chemical ingredients are used, therefore it is environment friendly. Raw material (wastage tyre) is cheap and easily available, Generate economically valuable products out of waste tyres and products have good market value and demand. Also each recycled ton of tyres preserves 10 tons of carbon dioxide (CO2) that is a major green house gas. Some Uses of rubber powder Rubber powder has many applications like : Shoes factories, Tyres factories, Rubber connections factories, Oil seals factories, Hoses factories and likes. There is a rapid market increase of rubber powder in India. Demand of rubber powder in India is increased by 5%-8%. There is fair scope of this product. Presently reclaim rubber is used in the manufacture of tyres, butyl tubes, cycle tyres and tubes, battery containers, tread rubber, belts and hoses, moulded and extruded products. India ranks third in production and fourth in consumption of natural rubber in the world. Rubber plantations are spread over 5.9 lakhs hectares in 16 states. Production of natural rubber is dominated by small holdings (average holding size of 0.5 hectare), which account for 88 percent of the production. As a whole it is a good project for entrepreneurs for investment.
Plant capacity: Rubber Powder : 5.0 MT/day •By Product Steel Wire : 1.4 MT/dayPlant & machinery: Rs 116 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 246 Lakhs
Return: 26.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 55 of 337 | Total 3361 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 55 336 337   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top