Google Search

Search

Already a Member ?

Best Business Opportunities in Jharkhand- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mining & Minerals: Project Opportunities in Jharkhand

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

The newly carved out resource rich State of Jharkhand is widely acclaimed as the region of the future, having immense potential for industrialisation with its large deposits of minerals which could provide a firm launching pad for various industries.

RESOURCES:

Jharkhand is one of the richest zones of minerals in the world. The 40% of the total minerals of the country are available in this state. The State is the sole producer of cooking coal, uranium and pyrite. It ranks first in the production of coal, mica, kyanite and copper in India. The geographical exploration and exploitation of gold, silver, base metals, decorative stones, precious stones, etc. are the potential areas of the future. Jharkhand is also endowed with other resources such as surface and ground water, land with immense bio-diversity, moderate climate, disciplined and skilled manpower, adequate availability of power, which are the basic essentials for the growth and development of industries.

GOVERNMENT POLICIES:

Jharkhand region is generously endowed with Mineral Wealth and the State Government is committed to create an environment conducive to the growth of Mining and Mineral based Industries in the State. In view of this, the State's Industrial policy covers certain clauses relevant for Mining and Mineral sector, which are enumerated below:

•        Simplify procedures and expedite granting of mining leases.

•        Provide certain relief to make mining activities easier.

•        Encourage use of modern exploration techniques to set up a resource inventory of various minerals in the State.

•        Encourage joint venture projects with SMDC.

•        Clear mining lease applications and project report within 60 days.

•        Encourage foreign investment and technological collaboration by OCBs and NRIs in selected sectors including Mineral development.

•        Encourage Private Sector participation in Mining Activities

Jharkhand State Mineral Development Corporation Ltd. was incorporated on 7th May, 2002 after bifurcation from Bihar State Mineral Development Corporation Ltd. JSMDC is a Government of Jharkhand Undertaking under the Dept. of Mines & Geology, Govt. of Jharkhand. It is premier producer and supplier of minerals and mineral based products in the State of Jharkhand. Core business of the Company is production and marketing of coal, limestone and its powder, kyanite, graphite, granite blocks and manufacturing of granite tiles of smaller dimensions. JSMDC is a consistently making profit company. Annual turnover is more than 100 Crores in the current fiscal year.

 

 

 

Agro-Based Industries: Project Opportunities in Jharkhand

 

 

PROFILE:

 

Agro-based industry would mean any activity involved in cultivation, under controlled conditions of agricultural and horticultural crops, including floriculture and cultivation of vegetables and post-harvest operation on all fruits and vegetables. The development of agro-industries has assumed crucial importance in the economic planning and progress of the country. The agro industry is regarded as an extended arm of agriculture. The development of the agro industry can help stabilise and make agriculture more lucrative and create employment opportunities both at the production and marketing stages. The broad-based development of the agro-products industry will improve both the social and physical infrastructure of India. Since it would cause diversification and commercialization of agriculture, it will thus enhance the incomes of farmers and create food surpluses. The state of Jharkhand having diversified agro-climatic conditions is much suited for the development horticulture based economy that has ample scope for its growth.

RESOURCES:

The agro-climatic conditions of the State are conducive for commercial cultivation of large varieties of fruits, vegetables,flowers and medicinal and aromatic plants. Plantation and Horticulture is one of the important sub sectors of Agriculture having ample scope for expansion in the state of Jharkhand. The state of Jharkhand has a total geographical area of 79.7 lakh ha out of which cultivable land is 38 lakh ha. The net irrigated area is only 1.57 lakh ha which is only 8% of the net sown area. The total area occupied for plantation and horticulture crop in the state is about 2.57 lakh hectares. Different kinds of fruits are grown in Jharkhand. The crops grown in Jharkhand are Mango, Litchi, Stone fruit (Peach), Citrus (Lime/Lemon), Awla and Papaya in fruits, Chilli, Turmeric and Ginger in spices, Rose, Marigold, Gerbera, Carnation and Gladiolus among flowers, Lemon grass, Palmarosa and Rosa damascena in aromatic plants, Cashew in Plantation crops. Jharkhand endowed with vast impounded fresh water resources in the form of tank/ponds and reservoirs. The major plantation crops cultivated in the State are cashew nut and coconut. The Board has identified the State as high potential State for coconut cultivation as the average productivity of coconut palm is 36 nuts per palm, which is above the national average of 34 nuts. Cashew nuts popularly known as a gold mine of wastelands is very ideal for cultivation in wastelands and hence there is good potential for cashew cultivation especially in East and West Singhbhum districts. Tea plantation in a small measure has been taken up in Ranchi district, which has a favourable climate for growing tea.

 

 

 

GOVERNMENT POLICIES:

 

 The promotion of Agro-based industries is among the priorities of the State Government. The state has assured supply of fruits & vegetables grown by applying scientific techniques, investment in post harvest and good transport infrastructure. The National Horticulture Mission (NHM) in the Jharkhand State was launched in late 2005-06 initially in 10 districts with main focus on production of planting materials, vegetable seed production, establishment of new gardens, creation of water resources etc. Establishment of new gardens include perennial and non perennial fruits, spices, floriculture, aromatic and medicinal plants. This scheme was 100 % sponsored by Central Govt. during 2005-06 and 2006-07 (Xth Five Year Plan). However, during 2007-08 and onwards (XIth Five Year Plan) this scheme has been implemented in 15 districts with the pattern of assistance as 85:15 by Central Govt. and State Govt. respectively. The Jharkhand government has decided to set up a food park to kick off the development of the food processing sector in the state and attract investors. In general very few small scale food processing industries are present in the state.

 

 

 

 Sericulture (Tasar Silk): Project Opportunities in Jharkhand

 

PROFILE:

Sericulture is an agro-based industry. It involves rearing of silkworms for the production of raw silk, which is the yarn obtained out of cocoons spun by certain species of insects. The major activities of sericulture comprises of food-plant cultivation to feed the silkworms which spin silk cocoons and reeling the cocoons for unwinding the silk filament for value added benefits such as processing and weaving. Silk is a fine strand of fiber that is a solidified secretion produced by certain caterpillars to encase themselves in the form of cocoons. India is second largest producer of silk. Sericulture industry is looking out for the developments of young age silk worm rearing or chawki rearing. Care of silk worms start from the stage of procurement of silk worm eggs from the grainage itself. Silk worm eggs are distributed to the farmers for commercial rearing when active development of embryo is in progress. The important aspect of young silkworm rearing management are a suitable separate rearing house or room, well maintained mulberry garden with assured irrigation facilities. Sericulture has emerged as a virtual lifeline and a profitable employment avenue for villagers in Maoist-affected areas in India's eastern Jharkhand. Under the aegis of the Jharkhand state industrial department, farmers are beginning to rear silkworms.

RESOURCES:

Jharkhand, much like Chattisgarh and Uttaranchal, is endowed with adequate forest cover. These forests are home to two species of trees -Arjuna (Terminalia Arjuna) & Asan (Terminalia Tomentosa) which are breeding ground for the moth which produces the cocoon from which Tasar yarn is reeled. Jharkhand's forest department is also planning to encourage planting of Arjuna trees in place of the traditional Acacia or Eucalyptus trees. Tussar Food plants are available over an area of 9 lakh hectares. The Singhbhum and Santhalpargana regions are the main silk producing centres in the State. The State is promoting this activity through 28 pilot project centres situated in different areas. Each rearer can rear on an average 200 eggs or Disease Free Laying (DFLs) so the annual demand of commercial seed or egg is of 130 lakh. There are three types of seeds or eggs – Nucleus, Basic seed and Basic seed multiplied to commercial seed.

GOVERNMENT RESOURCES:

Tasar culture is a backbone for Tribal development, and the Government of India, through the Central Silk Board and different State Governments have initiated several developmental and welfare measures for the tribal welfare through it. Jharkhand's forest department is also planning to encourage planting of Arjuna trees in place of the traditional Acacia or Eucalyptus trees. Jharkhand Sericulture Development Institute (JSDI) and Jharkhand Silk Technical Development Institute (JSTDI) are being strengthened to give an impetus to this sector. During the year 2010-11, it is proposed to rear 2.35 lakh tasar nucleus DFLs, 16 lakh of tasar basic DFLs and 96 lakh of commercial DFLs through seed and commercial rearers in the State. It is proposed to be benefited 40,000 -50,000 Tasar farmers through Tasar seed production and its rearing during the year.

 

Steel Industry

 

PROFILE:

Steel Industry is a booming industry in the whole world. India’s economic growth is contingent upon the growth of the Indian steel industry. Consumption of steel is taken to be an indicator of economic development. While steel continues to have a stronghold in traditional sectors such as construction, housing and ground transportation, special steels are increasingly used in engineering industries such as power generation, petrochemicals and fertilisers. Indian Steel Industry is more than a century old. India has now emerged as the eighth largest producer of steel in the world with a production capacity of 35MT. Almost all varieties of steel is now produced in India. India has also emerged as a net exporter of steel which shows that Indian steel is being increasingly accepted in the global market. The growth of the steel industry in India is also dependant, to a large extent, on the level of consumption of steel in the domestic market. Steel consumption is significant in housing and infrastructure. In recent years the surge in housing industry of India has led to increase in the domestic demand for steel.

 

 

RESOURCES:

Jharkhand emerges as hub for steel companies. The state is endowed with deposits of Iron Ores of both, Hematite & Magnetite. The Hematite deposits are mainly located in the West Singhbhum District and have a resource base exceeding 3700 Million Tonnes. These have been explored only in pockets by large industry houses in their lease hold. There is a very good scope of enlarging this resource base by further exploration. The Magnetite Deposits are located in the East Singhbhum, Latehar & Palamu districts. They comprise lenticular ore bodies as well as Schist rocks with 80 to 36% magnetic. The exploration of these bodies is yet to be taken up. The existing steel mills are sourcing their iron ore (Hematite) from West Singhbhum. The Magnetite ore is being used in heavy media coal washeries & paints. Tata Steel's largest plant is located in Jamshedpur, Jharkhand, with its recent acquisitions; the company has become a multinational with operations in various countries. If the interest shown by all the companies, big and small, in Jharkhand's iron ore deposits translates into reality, the state will produce more than half the total steel in India. First Iron & steel factory  is located at Jamshedpur and Largest Steel plant in Asia is Bokaro steel plant.

 

GOVERNMENT POLICIES:

Under the new industrial policy, iron and steel has been made one of the high priority industries. Price and distribution controls have been removed  as well as foreign direct investment up to 100% (under automatic route) has been permitted.  The Trade Policy has also been liberalized and import and export of iron and steel is freely allowed with no quantitative restrictions on import of iron and steel items. Tariffs on various items of iron and steel have drastically come down since 1991-92 levels and the government is committed to bring them down to the international levels.  With the abolishing of price regulation of iron and steel in 92, the steel prices are market determined. The policy devises a multi-pronged strategy to achieve these targets with following focus areas; removal of supply constraints especially availability  of critical inputs like iron ore; improve cost competitiveness by expanding and strengthening the infrastructure in roads, railways, ports and power; increase exports; meet the additional capital requirements by mobilizing financial resources; promote investments by removing  procedural delays. In addition the policy also addresses challenges arising out of environmental concerns, human resource requirements, R&D, volatile steel prices and the secondary sector. 

 

Rural Industries: Project Opportunities in Jharkhand

 

PROFILE:

Rural industry is an important source of employment for workers shifting out of agriculture. The rural industry continues to play a significant role in the expansion ofemployment, improvement in productivity and earnings, and poverty reduction in many non-industrialized countries; this is particularly the case in India. This sector has immense export potential which needs to be exploited to earn foreign exchange. To give thrust, the government aims to provide benefits in the various areas such as handloom, handicrafts, khadi village industries, forest based industries etc.

RESOURCES:

Handloom is labour intensive cottage industry sector providing employment to around 1.5 lakh weavers throughout the State. Various incentives to the handloom weavers are being provided under Deendayal Hastkargha Protsahan Yojana, which aims attaking care of wide gamut of activities, such as basic inputs like looms and accessories, product development, infrastructure support, institutional support, training to weavers, supply of equipment and marketing support, both at micro and macro levels in an integrated and coordinated manner for an overall development of the sector and benefit to handloom weavers. Handicrafts of Jharkhand reflect the cultural heritage, customs and traditions of the State. The State manufactures handicrafts in cane and bamboo works, woodcarving, stoneware, brassware, Lac based handicraft items, paper mache, terracotta, etc. The State Government may set up a model suitable ‘Handicraft Village’ in each of the districts of the State for promoting the traditional arts and crafts of the villages by adopting the "One Tambon One Product" model of Thailand. Various forest produce available in the state are mahua seed, sal seed, shellac, bamboo, kendu leaf, harre, bahera, etc.

 

GOVERNMENT POLICIES:

Focus of the Rural Industrial Policy:-

1.       Providing ample employment opportunities through rural industries.

2.       Establishing rural industries and providing help on priority basis for skill enhancement, modern technology, and marketing especially for beneficiaries of scheduled caste, scheduled tribe, backward, and minority sections.

3.       Giving priority to participation of women in development of rural industries.

4.       Encouraging participation of private sector, non-governmental organizations, cooperative societies, and self help groups for development of rural industries.

5.       Implementing cluster approach.

6.       Value addition to the minor forest produce and medicinal herbs in the tribal areas of the state itself and passing on the benefits to the tribal population of the area.

7.       Connecting rural industries with E-commerce.

With the implementation of the Rural Industrial Policy, active participation of experienced craftsmen and industrialists in the field of handloom, handicraft, leather industry, other cottage industries and silk centers would be ensured for overall development of rural industries in the rural areas.

 

 

Tourism: Project Opportunities in Jharkhand

 

PROFILE:

Tourism is one of the fastest growing industries in the world. The number of tourists worldwide has been registering phenomenal growth and it is expected that this number would shortly touch 1.5 billion. Tourism contributes about 11% of the world work force and 10.2% of the global gross domestic products. The dynamic growth of this industry is evident from the fact that a new job is added to this sector every 2.5 second. Jharkhand is endowed with rich cultural heritage and bestowed liberally with bounties of nature. Various initiatives are being taken by the Government and other organizations to promote tourism here. Jharkhand is blessed with an exotic landscape: the rolling hills, beautiful plateaus, sparkling rivers, etc. that largely contribute towards tourism at Jharkhand. Besides, the national parks, wildlife sanctuaries, holy shrines and museums, etc. largely attracts tourists to come to Jharkhand.

RESOURCES:

Blessed with immense biodiversity, moderate climate, rich cultural and historical heritage, Jharkhand is fast emerging as an ultimate tourist destination in eastern India. Jharkhand Tourism Department is taking utmost initiative to promote tourism in Jharkhand. A good number of hotels run by Jharkhand Tourism and private hoteliers have come up at popular tourist spots, which cater to all segments of travellers. Several Jharkhand Tourism Information Centers have been opened up in various parts of the city. These information centers provide details about Jharkhand travel, hotels, tourist attractions, travel agencies, licensed Jharkhand tourism guides and other important travel tips to holiday makers. Some of the major tourist spots in Jharkhand that play a vital role in the tourism industry of Jharkhand are: Netarhat, Betla National Park, Baidyanath Dham so on. It is noteworthy in this context that Kanke Dam, Ranchi Hill, Tagore Hill, Hatia Dam, Dasham Falls, Jagannath mandir, Jonah Falls, Hoondru waterfalls, etc. are the projects under the Tourism Industry of Jharkhand that heavily contributes towards the economy of the State.

GOVERNMENT POLICIES:

Jharkhand has huge potential in tourism sector. The tourism potential of the state has not been exploited and at the same time tourist spots have not been highlighted at national and international level. Jharkhand government seems to be serious to promote tourism in the state. The State Government would set up a Jharkhand Tourism Development Board to facilitate enter departmental co-operation and coordination to promote Tourism in the State. This Board would be set up under the chairmanship of the Chief Minister of Jharkhand with the Tourism Minister as Vice-chairman and Principal Secretaries/Secretaries of other relevant departments as members. The Board would also have representatives of the Hotel Association, Travel Agents Association, Adventure Sports Operators Association, NGO's and other non-official members having outstanding contribution or expertise in the field of development and promotion of tourism industries. Financial assistance as grants-in-aid, etc would be provided (to this board). The Board would advise the Government to lay down the policy guidelines for the development and promotion of tourism industry in the State, to promote public-private partnership and public sector would undertake all steps to develop and promote tourism in the State.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 53 of 337 | Total 3361 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 53 336 337   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Sanitary Napkins - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

The Sanitary napkin industry is closely connected with the mode of life, which is in turn directly correlated to housing. Accordingly this industry has always grown by keeping space with improvement in living and it is new indispensable for sanitary in modern housing. In India, the technology for sanitary napkins available by processing of raw cotton spinning and weaving of napkins. On small scale, the processed cotton is purchased which is spinned and woven. Sanitary napkin is a product used by women during the menstrual period to treat menstruation. It is one of the daily necessities for women. Most napkins will prevent leakage. Uses: • Sanitary Napkins are exclusively used by adult girls & Ladies around the world during their menstrual periods as a means of maintaining physical aid & to avoid wetting or staining of the clothes. • Sanitary Napkin is not reasonable & it is to be thrown away only, when it is saturated with wet liquids. • Its use is much popular amongst the educated class of adult girls & ladies. The Industry in India is of recent origin. The first unit is to manufacture viscous napkin filament yarn. Sanitary napkins have an important place in women's history and in the history of technology. 19th Century research into disposable sanitary napkins marked the humble beginnings of a new era of gynecological sanitary. Hindustan Lever (now Hindustan Unilever), Johnson & Johnson and Procter & Gamble have been the lead players in sanitary napkins market. The Unilever-Kimberly Clark joint venture had earlier entered the Indian market with its brand, Kotex, in competition with the market leader, Whisper of Proctor & Gamble. Kimberly Clark had launched upgraded Whisper with Wings brand, priced only 5% higher than the regular Whisper brand. After the launch of Whisper Extra Dry from Procter & Gamble, Johnson & Johnson came in with Stayfree Spirit. Any entrepreneurs venture into this field will be successful. Few Indian Major Players are as under:- Carewell Hygiene Products Ltd. Godrej Consumer Products Ltd. Gufic Biosciences Ltd. Hindustan Unilever Ltd. Johnson & Johnson Ltd. Kimberly Clark Lever Pvt. Ltd. Procter & Gamble Hygiene & Health Care Ltd.
Plant capacity: 432000 Nos. / DayPlant & machinery: Rs. 103 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 980 Lakhs
Return: 33.00%Break even: 36.00%
Add to Inquiry Add to Inquiry Basket

Disposable Needles - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Disposable needles are widely used by doctors for injection purpose with the help of syringes. With the increase in population in our country, requirement of medicine and injections has increased. For more strength of people more number of needles is required with syringes. For quick relief, needles are used by surgeons, dental surgeons, Veterinary Surgeons, and by the breeders in the poultry farm, where the farm birds are periodically injected against epidemics. Surgical needles are of two types: those which have an eye through which the suture is threaded and eyeless needles where the suture is inserted into the hollow hilt and held in position by swaging the metal around it. The first patent on an eyeless needle was obtained by the late Sir Henry Souttar in 1921 but in the U.K. their use has only increased appreciably in the past few years. In the U.S.A. 70 percent of the suture needles are of the cycle’s type. The various components of Hypodermic needle shall be made from the following materials shown against each. • The Hub shall be made from free specially treated nylon/ PVC tube. • Stillete- Stillete shall be hard drawn hollow brass wire or stainless steel wire and supplied one for each needle. Hindustan Syringes and Beckton & Dickinson had launched Auto Disposable (AD) syringes. The new age AD syringe makes re-use impossible by locking the plunger after the medicine is injected. It cannot draw on the medicine a second time. In the field of cannulae and blood bags, Poly Medicure has emerged as a significant player. In the Indian single uses syringes market, which is nearly 1.5 bn units strong, Hindustan Syringes and Medical Devices (HMD) enjoys a 65% market share. Imports constitute 10% of this market. In the single use needles market, HMD has a 70% market share, followed by imported brands with a 25% market share. The size of the local needles market is 2.5 bn units per annum. Dispovan is the dominant brand in India, and it has been able to maintain and increase its market share in face of stiff competition from multinational and domestic challengers. So any new entrants can venture in to this industry.
Plant capacity: 1500000 Nos. / DayPlant & machinery: Rs. 585 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 945 Lakhs
Return: 29.00%Break even: 43.00%
Add to Inquiry Add to Inquiry Basket

Potato Flakes - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Potato is one of the important tuber vegetables, which is consumed throughout the year. Its botanical name is Solanum Tuberosum. Potatoes can be consumed in varied forms. In fact, it is a vegetable that can easily be combined with any other food item including other vegetables, cereals, pulses, meat and poultry. The raw materials required are fresh potatoes. Potato flakes are the most important form of dehydrated potato products, which also include potato granules, pellets, powder, shredded and sliced potato. Dehydrated potato flakes are made by pressing cooked mashed potatoes onto a drum drier, which forms a sheet that can be broken up and ground to the required density. Potato flakes can be used anywhere, where one would use mashed potatoes. Potato flakes are potatoes that have been through an industrial process to yield a packaged convenience food that can be reconstituted in the home in seconds by adding hot water or milk, producing mashed potatoes with very little expenditure of time and effort. Mashed potatoes can be reconstituted from potato flour, but the process is made more difficult by lumping; a key characteristic of flakes is, it eliminates the lumping and the mash is smooth. Properties of Potato Flakes • It is crispy and very lightweight product. • It is free flowing. • Its colour is same as potato • It can absorb moistures from air and become soft when exposed. • It can be preserved for more than one year when it is vacuum packed with nitrogen flash. The potato dehydration and flakes manufacturing unit has exclusively been reserved on small scale by Govt. of India as per Industrial Policy introduced in 1983. No any big competitor may enter in this field. The potato flakes and powder is meant only for export. Although domestic market for dehydrated and powdered potato is there but more than 70% of the total indigenous production of potato flakes /powder is exported to various countries. Due to demand growth, it is a good project for entrepreneurs to invest. Any entrepreneurs venture into this field will be successful.
Plant capacity: 8.4 MT/ DayPlant & machinery: Rs. 789 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 1161 Lakhs
Return: 25.00%Break even: 47.00%
Add to Inquiry Add to Inquiry Basket

Rice Cultivation - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Rice is the leading food crop in the developing world in terms of total world production. It represents the staple food for almost two-thirds of the world’s population. Rice provides 21% of global human per capita energy and 15% of per capita protein. However, the world’s stocks of stored rice grain have been falling in negative correlation to each year’s consumption levels which now exceeds actual annual production. Rice is generally considered a semi-aquatic annual grass plant, which can be grown under a broad range of climatic conditions. Cultivated rice belongs to the species O. sativa and O. glaberrima. While O. sativais the predominant species, O. galberrimais cultivated on a limited scale and only in Africa. The major rice producers in 2010 were China, India, Indonesia, Bangladesh, Vietnam and Myanmar producing alone more than 75% of the world production. Rice grain comprises the edible rice caryopsis of fruit enclosed in a protective covering, the hull (husk). During the milling process, rough rice is milled to produce polished edible grain by first subjecting to dehusking and then to the removal of brownish outer bran layer known as whitening. Finally, polishing is carried out to remove the bran particles and provides surface gloss to the edible white portion. The duration of growth for cultivated rice varies from 80 to 280 days and can be generally divided into early (80–130 days), intermediate (130–160 days) and late (160+days) maturing cultivars. In the rice plant, three growth phases can be distinguished: the vegetative phase – when the plant begins to partition assimilation to the developing panicle; the reproductive phases with panicle (flowering) development; and the ripening or grain-filling phase which begins after anthesis and ends at maturation. The duration of growth for cultivated rice varies from 80 to 280 days and can be generally divided into early (80–130 days), intermediate (130–160 days) and late (160+days) maturing cultivars. In the rice plant, three growth phases can be distinguished: the vegetative phase – when the plant begins to partition assimilation to the developing panicle; the reproductive phases with panicle (flowering) development; and the ripening or grain-filling phase which begins after anthesis and ends at maturation. As a whole it is a good project for entrepreneurs for investment.
Plant capacity: Rice Paddy: 72500 MT/ Annum•Rice Straw as by product: 145000 MT/ AnnumPlant & machinery: Rs. 1741 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 4418 Lakhs
Return: 9.00%Break even: 10.00%
Add to Inquiry Add to Inquiry Basket

Cattle & Poultry Feed - Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

In India the animal feed industry is of recent origin, the first animal food plant having been established in 1960. There are today as many as 14 plants in the organized sector, besides many small feed compounders, which operate in large cities. The 14 organized units have modern or semi modern equipment for manufacturing compound feeds. All of them have excellent facilities for quality control and are well equipped for chemical analysis of raw materials and the finished products. The installed capacity for all types of feeds that can be produced in the units under organized sector in India is estimated in the neighbourhood of 630000 metric tonnes a year. Taking into account the expansion plans of the organized sector, it is anticipated that the capacity of this industry in India is likely to increase rapidly. Types of cattle Feeds: • These for calves before their rumens start to function effectively. • Those for cattle with functioning rumens. Poultry Feed Classification: • Complete Feed • Concentrates • Mash feeds • Meal feeds • Scratch feeds • Supplements India has the largest cattle, buffalo and goat population according to latest census. There are about 200 million cattle, 50 million buffaloes and 90 million goats in the country. About one sixth of the cattle, about half of buffalo and one fifth of goat population in world are in India. Animal husbandry plays an important role in the national life and accounts for about 10% of the national income. In particular the contributor of the cattle and buffalo to the economy is considerable. They are the main source of drought power in agricultural operations and rural transportation they provide essential, foods like milk and meal. Industries playing increasing roles in the struggle against world hunger include the poultry industry, which require less capital to enter than other animal industries, and the feed industry, which provides economical, feeds upon which the poultry industry depends. Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under:- Advanced Bio-Agro Tech Ltd. Advanced Enzyme Technologies Ltd. Agribiotech Industries Ltd. Agro Tech India Ltd. Allana Cold Storage Ltd. Amrit Feeds Ltd. Andhra Sugars Ltd. Anirudh Foods Ltd. Annam Feeds Ltd. Anupam Extractions Ltd. Arambagh Hatcheries Ltd. Aries Agro Ltd. Aries Marketing Ltd. Bala Industries & Entertainment Pvt. Ltd. Balaji Foods & Feeds Ltd. Baramati Agro Ltd. Brooke Bond Lipton India Ltd. C & M Farming Ltd. C P Aquaculture (India) Pvt. Ltd. Damania Pharma Ltd. Dhanalaxmi Roto Spinners Ltd.
Plant capacity: 15000 MT/ AnnumPlant & machinery: Rs. 160 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 405 Lakhs
Return: 25.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

PSC Electric Poles - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

PSC stands for pre-stressed concrete. These are highly durable and strong PSC Poles fabricated from excellent quality concrete material. These poles are used extensively in electrical industry, for establishing electrical connections and fittings. PSC poles are available in different dimensions and weight depending on the requirement. The poles are eco friendly and require very low maintenance. Types of Utility Distribution Poles: • Tangent poles • Guyed poles • Self-supporting poles The power sector is one of the crucial inputs to the growth of other industrial sectors and overall economic growth of India. India has fourth largest installed generating capacity in world but the per capita consumption of electricity is very low, owing to a huge gap between demand and supply of power. Traditionally the power sector was dominated by the public sector but has now been opened for competition from private and foreign players by the government sector. Few Indian Major Players are as under:- Ashoka Pre-Con Pvt. Ltd. Engipress Industries Ltd. Siporex India Pvt. Ltd.
Plant capacity: 60000 Nos. / AnnumPlant & machinery: Rs. 126 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 415 Lakhs
Return: 25.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

Fitness Equipments (Elliptical Cross Trainers, Treadmill and Exercise Bikes) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Plant Layout

Fitness/Exercise equipment is any apparatus or device used during physical activity to enhance the strength or conditioning effects of that exercise by providing either fixed or adjustable amounts of resistance or to otherwise enhance the experience or outcome of an exercise routine. Physical fitness is a general state of health and well-being or specifically the ability to perform aspects of sports or occupations. Physical fitness is generally achieved through correct nutrition, exercise, hygiene and rest. It is a set of attributes or characteristics that people have or achieve that relates to the ability to perform physical activity. • An elliptical trainer or cross-trainer is a stationary exercise machine used to simulate stair climbing, walking, or running without causing excessive pressure to the joints, hence decreasing the risk of impact injuries. • The Exercise Treadmill is one of the most popular fitness equipment among fitness enthusiasts. This fitness machine is indoor sporting equipment which is used for walking and running exercises while in a stationary position. • A stationary bicycle also known as exercise bicycle, exercise bike is a device with saddle, pedals, and some form of handlebars arranged as on a bicycle, but used as exercise equipment rather than transportation. The fitness industry in India - valued at anything between a whopping Rs 2,000 crore and a more modest Rs 300 crore — however is not celebrating just yet. In fact, it's still a fragmented industry with diverse players such as health clubs, gyms and trainers. The health club approach and a feel good factor — for a highly stressed out segment — is the growing focus of the fitness industry in India." For corporate executives, health is often an important consideration. They have various problems ranging from spondilyosis, to posture and stress-related issues. The fitness equipment market in India was estimated to be worth 12.5 bn IN 2008; and was expected to reach INR 63.3 bn by 2012. The annual growth rate is expected to be around 50%. The key segments in the sector are the home segment and the institutional segment. As a whole establishing Fitness Equipments Unit is one of the project which has good prospect for the entrepreneurs to invest. Few Indian Major Players are as under:- Cosco (India) Ltd. Cravatex Ltd. Gympac Fitness Systems Pvt. Ltd. Splendor Fitness Pvt. Ltd.
Plant capacity: Elliptical Trainers: 21000 Nos. / Annum•Treadmill: 21000 Nos. / Annum•Exercise Bikes: 21000 Nos. / AnnumPlant & machinery: Rs. 65 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 298 Lakhs
Return: 27.00%Break even: 65.00%
Add to Inquiry Add to Inquiry Basket

Sodium Silicate from Rice Husk/Hull - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Rice husk a major by-product of the rice milling industry, is one of the most commonly available lignocellulosic materials that can be converted to different types of fuels and chemical feedstocks through a variety of thermo chemical conversion processes. During milling of paddy about 78 % of weight is received as rice, broken rice and bran. Rest 22 % of the weight of paddy is received as husk. This husk is used as fuel in the rice mills to generate steam for the parboiling process. This husk contains about 75 % organic volatile matter and the balance 25 % of the weight of this husk is converted into ash during the firing process, is known as rice husk ash. The silicates are used as a fire-resisting binder for asbestos and other similar insulating materials, as a binding cement. They are also employed in the preparation of cores and moulds for casting molten metals. Sodium silicates are used in the composition of acid resisting and refractory cements. Other uses of the silicate are as follows: as a suspension agent in are purification processes, from industrial wastes, for water proofing stone products, as a coating material in the packing materials, such as wooden panels, paper or cardboard boxes, for the insulation of electric copper wires, in the preservation of eggs. The Midwest U.S. market for sodium silicate is highly concentrated, with only four competitors. The competitors are PQ Corporation, Occidental Chemical Corporation, INEOS Group Limited, and W.R. Grace & Company. PQ Corporation is a leading global producer of silicate, zeolite, and other performance materials serving the detergent, pulp and paper, chemical, petroleum, catalyst, water treatment, construction, and beverage markets. The future demand for sodium silicate is a function of growth of the end-user industries, mainly soap and detergent factories, pulp and paper mills, paint, pigment and adhesive factories. Information obtained from Ethiopian Investment Authority give strong indication that private investment in the aforementioned industries is bound to grow. Due to demand growth, it is a good project for entrepreneurs to invest. Any entrepreneurs venture into this field will be successful. Few Indian Major Players are as under:- Abhiraami Chemicals Ltd. Balls & Cylpebs Ltd. Shri Aster Silicates Ltd.
Plant capacity: 6000 MT/ AnnumPlant & machinery: Rs. 144 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 374 Lakhs
Return: 28.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Poultry Feed - Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Cost of Project

Poultry feed is needed to produce poultry, a substantial part of the food industry. Feeds are used as edible materials, which are consumed poultry and contribute energy and/or nutrients to the poultry diet. Feed is needed to produce poultry, which are substantial parts of the food industry. Poultry includes the following: Chickens, Turkeys, Ducks, Guineas, Pigeons, Pheasant, Ostrich, Peafowl and Swan etc. The size of the food industry depends on population, which is not constant. Two international Hatcheries viz. the Arbor Acres and the shaver, which started their operation in India in early 1960’s, created a large market for quality poultry feeds in North as well as in Western India. It was formed necessary to provide well-balanced feed to the hybrid birds to exploit their genetic potential to the maximum. Efficient chick starter and growing mashes aid proper development of chicks and pullets. Proteins, largely of vegetable origin, in the growing mesh, encourage the normal development of pullets and help them to lay lower. These are fed to which when they are 24 hours old. Industries playing increasing roles in the struggle against world hunger include the poultry industry, which require less capital to enter than other animal industries, and the feed industry, which provides economical, feeds upon which the poultry industry depends. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under:- Intercorp Biotech Ltd. Japfa Comfeed India Pvt. Ltd. Jupiter Biotech Ltd. Kapila Krishi Udyog Ltd. Kerala Feeds Ltd. Khandesh Extraction Ltd. Kirti Dal Mills Ltd. Kumar Food Inds. Ltd. Kwality Dairy (India) Ltd. Kwality Feeds Ltd. Lakshmi Energy & Foods Ltd. Laxmi Starch Ltd. Lipton India Ltd. Maharashtra Agro-Inds. Devp. Corpn. Ltd. Maheshwari Solvent Extraction Ltd. Mapro Industries Ltd. Nova Chemie (India) Ltd. Origin Agrostar Ltd. Parakh Foods Ltd. Piccadily Agro Inds. Ltd. Pioneer Feeds & Poultry Products Pvt. Ltd. Pranav Agro Inds. Ltd. Prima Agro Ltd. Puri Oil Mills Ltd. Rainbow Agri Inds. Ltd. S K M Animal Feeds & Foods (India) Ltd.
Plant capacity: 72000 MT/ AnnumPlant & machinery: Rs. 294 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 1167 Lakhs
Return: 29.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

HDPE/PP Woven Sacks - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

HDPE/PP oriented strips are becoming increasingly popular in India & have caught the eye of many end users for their requirement of packing materials. They have become popular on account of their inertness towards chemical, moisture & excellent resistance towards rotting & fungus attack. They are non toxic. Lighter in weight & have more advantages than conventional bags. PP/HDPE woven sacks laminated with LDPE/PP liner have wider applications. HDPE woven sacks are much stronger & can withstand much higher impact loads because of HDPE strips elongation at break is about 15-25% as compared to 30% of Jute. These sacks are much cleaner & resist fungal attack. Jute prices are very unstable in the market since Jute is an agriculture product. These sacks have many advantages over other conventional sacks materials & are quite competitive in price. The major users of HDPE/PP woven sacks are fertilizer, sugar, cattle feed, cement & other chemical Industries. Oil seeds, salt, starch, pesticides, detergents & many other items are also being packed in woven sacks. Fabric from HDPE strips is also ideal for the manufacture of shopping bags, sport hold-all, deck chairs, books binding Cinema screen wall facing & carpet backing etc. Woven sacks enjoy a good market in India and will continue to do so in the coming years. Plastic woven sacks are rapidly replacing jute bags because they have often various advantages over the conventional jute fabrics as packaging materials. They have excellent chemical resistance; they are light in weight and more suitable for packing of various chemicals in the form of granules and powder. They are also: Stronger and can withstand much higher impact loads. Their elongation at break is 15 to 25 per cent compared to 3 per cent for jute; they are much cleaner, both in use and production and can be used to handle food products as they are resistant to fungal attack. Because of such superior properties of plastic woven sacks, it has high demand everywhere. Due to demand growth, it is a good project for entrepreneurs to invest. ? Few Indian Major Players are as under:- Aditya Polymers Ltd. Kamakhya (India) Ltd. Neo Corp Intl. Ltd. Nirmaan India Ltd. Oripol Industries Ltd. Polyspin Exports Ltd. Primo Pick N Pack Ltd. Propene Products Ltd. Prudential Polywebs Ltd. S P L Industries Ltd. (Maharashtra) Safepack Polymers Ltd. Shankar Packagings Ltd. Tulsyan N E C Ltd.
Plant capacity: 36000000 Nos. / AnnumPlant & machinery: Rs. 294 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 1046 Lakhs
Return: 27.00%Break even: 55.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 53 of 337 | Total 3361 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 53 336 337   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top