Google Search
Search
Already a Member ?
Vinyl & Latex Surgical Gloves | |
| A surgical (surgeon’s) glove is made of natural or synthetic rubber intended to be worn by operating room personnel to protect a surgical wound from contamination. Surgical gloves have more precise sizing (numbered sizing, generally from size 5.5 to size 9), and are made to higher specifications. They are hand specific. Due to the increasing rate of latex allergy among health professionals as well as in the general population, there has been an increasing move to gloves made of non-latex materials such as vinyl or Nitrile rubber. However, these gloves have not yet replaced latex gloves in surgical procedures, as gloves made of alternate materials generally do not fully match the fine control or greater sensitivity to touch available with latex surgical gloves. Vinyl Gloves are made from Poly Vinyl Chloride(PVC). Vinyl gloves are ideal for glove users sensitive to latex gloves and many childcare and foodservice establishments will use vinyl exam gloves. Vinyl gloves stretch to provide a relaxed and comfortable fit but they are not as stretchy or form-fitting as latex gloves or Nitrile gloves. Vinyl gloves are also the most affordable of all glove materials. Vinyl gloves are an economical alternative for applications where mechanical stress and barrier protection are of less importance. The skin-friendly material is suitable for users suffering from a latex or chemical allergy. The India disposable gloves market was valued at $303 million in 2017, and is expected to reach $760 million by 2025, growing at a CAGR of 12.4% during the forecast period. In terms of volume, the natural rubber gloves segment accounted for more than two-fifth of the total market share in 2017. The growth of disposable gloves market in India is driven by growing awareness about hygiene, disease prevention, and safety among the Indian populace coupled with surge in the number of end users. Moreover, technological advancements in manufacturing gloves and unprecedented growth of the healthcare sector are expected to provide lucrative opportunities to market players in the near future. However, limitations in production capacity and toxic reactions associated with the use of certain gloves are expected to impede the market growth. Increasing spending in the country’s medical sector is likely to drive product demand over the coming years. Asia Pacific is estimated to register a CAGR of 8.6% from 2018 to 2025 on account of the soaring use of the product in medical applications. Demand is expected to rise in countries such as China, India, South Korea, and Indonesia owing to increasing usage in surgical applications and in the food and beverages industry. Entrepreneurs who invest in this project will be successful. Few Indian major players are as under Acknit Industries Ltd. Casil Health Products Ltd. London Rubber India Ltd. Sri Kannapiran Mills Ltd. Casil Health Products Ltd. | |
| Plant capacity: Vinyl Gloves (Wt. 5.5 gms each) : 75,000 Pairs/Day Latex Surgical Gloves (Wt. 4 gms each): 75,000 Pairs/Day | Plant & machinery: Rs 1153 lakhs |
| Working capital: - | T.C.I: Cost of Project : Rs 2325 lakhs |
| Return: 29.00% | Break even: 38.00% |
Email Us |
 Add to Inquiry Basket | |
We can provide you detailed project reports on the following topics. Please select the projects of your interests.
Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.
We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.
Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.
Information- One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
- One Crore is equivalent to ten million (10,000,000)
- T.C.I is Total Capital Investment
- We can modify the project capacity and project cost as per your requirement.
- We can also prepare project report on any subject as per your requirement.
- Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.
About NIIR PROJECT CONSULTANCY SERVICES | Hide  |
NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.
Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.
NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.
Copyright © 2003-2021 NPCS.
