A sodium bicarbonate plant converts soda ash solution into baking soda and allied grades by carbonation with CO2. Entrepreneurs and chemical companies set these plants up to supply bakeries, pharma makers, feed mills and flue-gas treatment users. As a sodium bicarbonate plant consultant, NPCS has worked with chemical clients since 1994. Our team helps you size the plant, select machinery, understand approvals and build a bankable report.

Sodium Bicarbonate Plant at a Glance
| Typical capacity | ~20–200 TPD |
|---|---|
| Land | ~2–5 acres |
| Power load | ~300 kW–1.5 MW |
| Water | Moderate |
| Manpower | ~20–60 |
| Indicative investment | ~₹10–60 crore |
Investment basis: excludes land.
Figures are indicative ranges. Your project report works them out for your capacity and location.
Market Demand for Sodium Bicarbonate in India
Demand for sodium bicarbonate in India is driven by bakery and food growth and by flue-gas treatment. Production is concentrated in Gujarat and Tamil Nadu, where soda ash is easiest to source. Seasonality is low, so offtake is fairly steady through the year. Export potential is medium.
- Food and bakery companies buying baking soda
- Pharma makers using it in antacids
- Feed makers adding it to animal feed
- Industrial buyers in leather, textiles and fire extinguishers
Sodium Bicarbonate Grades You Can Make
Most new units begin with one grade and add others once quality systems settle. Food grade suits bakery and food buyers, while pharma IP/BP grade serves antacid makers. Feed and technical grades go to animal nutrition and industrial users.
- Food grade, pharma IP/BP grade, feed grade, technical grade
Sodium Bicarbonate Plant Process
The sodium bicarbonate plant process starts by dissolving soda ash in water and passing CO2 through the solution in carbonation towers. Sodium bicarbonate crystallises out, and a centrifuge separates the crystals from the liquid. The crystals are then dried, milled and graded to the particle size a buyer wants.
Quality control runs throughout. Typical tests cover assay, pH, heavy metals and particle size, and the standards applied vary by grade, including IS 2194 and FSSAI or IP norms. The mother liquor is recycled, which keeps raw material use down.
- Soda ash dissolution
- Carbonation with CO2
- Crystallisation
- Centrifuging
- Drying
- Milling and grading
- Packing
Raw Materials and Machinery
Soda ash is the main input, and it is commonly sourced from Gujarat (Mithapur, Porbandar) and Tamil Nadu. CO2 can be bought or recovered from boiler flue gas, which lowers cost. Carbonation towers, the CO2 compressor and the centrifuge are the machines that most affect output and quality.
- Dissolvers
- Carbonation towers
- CO2 compressor
- Centrifuge
- Dryer
- Mill
- Classifier
Licences and Approvals for a Sodium Bicarbonate Plant
Sodium bicarbonate plant licence and approvals follow a set order: unit registration, State Pollution Control Board consent to establish before construction, product licences, then consent to operate. Reaction-based units are generally Red category, while blending-only units can be Orange or Green. The State PCB fixes the category at consent stage.
- FSSAI licence for food grade
- Drug licence for pharma grade
- Factory licence for the plant
| Pollution category | Reaction-based inorganic or organic chemical manufacturing is generally Red (CPCB S.No. 18.1 basic inorganic chemicals); smaller blending-only units can be Orange or Green. The State PCB fixes the category at consent stage |
|---|---|
| HSN code | 2836 30 (sodium hydrogencarbonate) |
| GST | 18% generally; food-grade retail packs follow their own entry, applied in the project financials |
| BIS / quality control order | IS 2194 used by buyers |
| FSSAI | FSSAI licence for food grade |
| Other licences | Drug licence for pharma grade; factory licence |
Choosing the Right Sodium Bicarbonate Technology
Carbonation towers are the core technology, and the real choice is how you get CO2. Buying CO2 keeps the setup simple and suits a smaller unit. Recovering CO2 from boiler flue gas lowers running cost, but needs a compressor and a steady gas source on site. Your project report compares both routes for your capacity and location.
Choosing the Right Plant Size
Plant size is a major decision because capacity runs from about 20 to 200 TPD, with indicative investment of ~₹10–60 crore excluding land. A smaller unit needs less capital and can serve regional food or feed buyers. A larger unit gains from CO2 recovery and bulk soda ash buying, but must compete with large soda-ash producers.
Government Schemes and Project Finance
Support for this project mainly comes through state incentives, which vary by state and should be checked locally. Our reports are used for bank loans and government programmes such as PMEGP, MSME schemes, Mudra and NABARD-linked projects, subject to each lender's requirements. A clear sodium bicarbonate plant project report helps lenders judge your numbers.
What Decides Success in a Sodium Bicarbonate Plant
Plants that do well secure low-cost soda ash and CO2 and hold the grade certifications their buyers ask for. The main risk is competition from large soda-ash producers, who can supply at scale.
- Fix soda ash supply early
- Plan CO2 recovery where flue gas exists
- Certify food and pharma grades
- Recycle mother liquor
How NPCS Helps You Set Up a Sodium Bicarbonate Plant
NPCS supports the decisions that shape this project: capacity, CO2 route, machinery selection and vendor choice. Our team also assists with plant layout, approvals planning, installation and commissioning, and prepares a report suited to lenders. If you're wondering how to start a sodium bicarbonate plant business, we begin with your capacity and location.
NPCS's published client list records 164 assignments across chemicals and petrochemicals projects between 2009 and 2026, for clients in 20 states and 23 countries.
What Your Sodium Bicarbonate Plant Project Report Covers
- Project introduction and BIS specifications
- Manufacturing process with flow sheet
- Market survey (demand, imports/exports, existing units)
- Personnel
- Plant and machinery with suppliers
- Land and building with layout
- Raw materials with sources and rates
- Financials (project cost, working capital, cost of production, profitability, break-even, 5–10 year cash flow, projected balance sheet, IRR/NPV/payback)
Sodium Bicarbonate Plant: Frequently Asked Questions
How much investment is needed to start a sodium bicarbonate plant?
Indicative investment is about ₹10–60 crore, excluding land, depending on capacity and technology. Your sodium bicarbonate plant setup cost in India will vary with CO2 recovery and grade. A project report works out the figure for your plan.
Which pollution category applies to a sodium bicarbonate plant?
Reaction-based manufacturing is generally Red under CPCB S.No. 18.1, while blending-only units can be Orange or Green. The State Pollution Control Board fixes the category at consent stage, so confirm it before you finalise the site.
How much land and power does a sodium bicarbonate plant need?
A plant typically needs about 2–5 acres and a power load of about 300 kW–1.5 MW, depending on capacity. Water requirement is moderate. These are indicative ranges, and your report refines them for your location.
How do I start a sodium bicarbonate plant business?
Start by choosing your grade, capacity and CO2 route, then secure soda ash supply. Next, get registration and State PCB consent to establish, and add FSSAI or drug licences by grade. A project report ties these steps together.
How does NPCS help with a sodium bicarbonate plant?
NPCS prepares the detailed project report and supports machinery selection, vendor choice, plant layout and approvals planning. Reports are tailored to your capacity, budget and location, and enquiries are answered within 24 hours.
