Google Search

Project Search

Already a Member ?

Electrical, Electronic Industries and Power Projects

Electric equipment industry contributes over 2% of GDP which is projected to increase to about 12% in 2015 according to a study by Frost & Sullivan. During the period, consumption of electrical equipment is estimated to increase from over USD 28 billion now to USD 363 billion, growing at a CAGR of about 30%. It is also expected that during 2010-2015, the Indian equipment manufacturing will grow at 5.5 times the growth rate of global electronic equipment production.

The electrical equipment and accessories industry, with its highly diversified content, may be broadly segmented into (i) generation equipment, (ii) transmission equipment, and (iii) distribution equipment. The equipments and accessories under these segments include motors, turbines, generators, switchgears, transformers, circuit breakers, induction motors, power capacitors, meters, transmission towers. Besides these, the spectrum covers a whole range of power cables including XLPE and AAC and ACSR conductors and electrical consumer products like fans, electric lamps, exhausts and domestic appliances and accessories. Inverters, gensets, UP also fall under its domain.

The electrical industry has been showing signs of recovery after poor performance in the recent years. The domestic electrical industry, which includes equipment for generation, transmission, distribution and use of power in industrial units, constitutes a major part of the electrical products.

The growth of the industry is directly related to the development of power generation and distribution. India's generation capacity of 2,300 MW in 1950 expanded to over 116,500 MW including non-utilities at the end 2000-01. The total installed capacity of electric power generation further increased to 141,080 MW in 2007-08 (upto January 2008) compared to a capacity of 128,000 MW during the same period in 2006-07. The Eleventh Plan has targeted a capacity addition of 78,570 MW.

The five years (2007-2012) may be the best of times for power equipment makers with the power sector on an expansion spree. With order-book growth expanding over the last three years, there is a good chance that this will continue. Close to 82% of the planned generation capacity for the Tenth Plan was either implemented or was in the process of being implemented. Even assuming a 70% implementation ratio for the Eleventh Plan, close to 55,000 MW will be added. Five ultra mega power projects, totaling 20,000 MW are coming up in 2008. In the transmission sector, for example, Power Grid Corporation is planning a capex of Rs 710 billion by 2010.

Earlier, the shortfalls in achieving the Plan targets of addition to power generation and up-gradation of transmission and distribution had adversely affected the electrical equipment industry. The peak shortage which was over 11% of the requirement in 2003-04 increased to 11.7% in 2004-05 and to over 12% in 2005-06. The shortage further rose to about 14% in 2006-07. In the ten months of 2007-08 the peak shortage had risen to over 15% of the peak demand of 107,010 MW.

Major players in electrical equipment segment are ABB, BHEL, BHEL Power Solutions, Havell's India, Kirloskar Electric, Crompton Greaves and Suzlon Energy.

According to the Power Ministry, the power sector has tied up Rs 2,240 billion worth of investments to build power plants with 70,000 MW capacities in the next three years.

With some fast moves at launching fast track projects to augment supplies, the Indian industry needs to improve its competitiveness. The Indian market is growing and multinationals with newer technologies are now more active.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Download List Download as Project List

Page 4 of 5 | Total 473 projects in this category
« Previous   Page 1 2 3 4 5   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

NameCapacityCost *Return %
Pre-Recorded Video Cassettes-0.0054.71
Rosin Cored Soft Soldering Wire-0.0054.47
Fluroscent Tube-0.0047.78
Reconditioning Of T.V. Picture tube-0.000.00
Refrigeration & Mini Refrigeration-0.0049.00
R.F.C. Coaxial Cable Connector-0.0031.00
Radio Receiver Sets-0.000.00
Refrigerator & Mini Refrigerator-0.0058.24
Rechargeable Torches Using Ni-Cd Cells-0.000.00
Rechargeable Alkaline Manganese Cell-0.0029.50
Radio Frequency Induction Heaters-0.0078.05
R.F. Coaxial Cables-0.0048.00
Reclamation of Automatic Batteries-0.000.00
Re-Conditioning of Picture Tubes (B/W)-0.0027.79
Reconditioning of Transformers (Distribution Transformers & Repairs)-0.0065.00
Repair Shop of Electric Energy Meter-0.0047.75
Resin Cast CT & PT (11 KV)-0.000.00
Satellite Broadcasting T.V. Channel-0.000.00
Solar Power Plant-0.000.00
Switch Mode Power Supply-0.0030.13
Solar Cells-0.0024.00
Solar Modules-0.000.00
Solar Powered Electronic Calculators-0.000.00
Soldering Paste-0.0031.65
Solar Cells-0.0031.21
Solar Cooker-0.0056.29
Solar Pump-0.000.00
Solar Water Heating Panels-0.0064.82
Steel Furniture & Electrical Appliances-0.000.00
Stereo Casette Recorders/ Players-0.0055.00
Stereo Amplifiers-0.000.00
Street Light Fittings-0.0045.00
Stereo Tape Recorder-0.0045.00
Semi-Conductors (Transistors and Diodes)-0.000.00
Semi Conductor Devices-0.000.00
Semi-conductors For Transistors & Diodes-0.000.00
Setting up of a Video Studio-0.000.00
Servo Motors-0.000.00
Servo Controlled Stabilizer-0.0044.69
Stamping & Laminators-0.0060.00
Small Transformer-0.000.00
Step Down Transformer-0.000.00
Squirrel Gauge Induction Motor-0.0066.17
Street Light Fittings-0.0060.00
Solar Power Plant-0.000.00
Storage Battery-0.000.00
Storage Battery Containers for Automobiles-0.0044.00
Semi-Conductor Devices-0.000.00
Tape Recorder Pinch Roller, Rubber, Drive, Belt Flat-0.0047.00
T V Signal Boosters-0.0023.70
T V Tumers-0.0046.35
T.V. Signal Boosters-0.0045.54
T.V. Signal Booster (50 160 dB)-0.0023.70
Table Fan-0.0058.08
Television Deflection Components-0.0043.20
Television Deflection Components-0.0049.25
Television (3-D)-0.0046.21
Television Picture Tubes-0.0028.67
Telephone Accessories-0.000.00
Telephone Cables-0.000.00
Television Aerial (Antenna)-0.000.00
Torch Size Battery Cells-0.000.00
Transformer Oil-0.000.00
Transformer Repair-0.000.00
Transformer Core-0.0076.01
Transmission Power Line Fitting-0.0057.07
Transmission Tower Fittings-0.0027.20
Transistor Header-0.000.00
Uninterrupted Power Supply-0.000.00
Vaccum Cleaner-0.0060.19
Video Cassettes-0.000.00
Video Cassette Recorder-0.0072.63
Video Cassettes Recorder-0.0064.00
Video Cassettes-0.0028.55
Video Cassettes (Complete Manufacturing & Assembling Unit)-0.000.00
Video Cassette Covers-0.000.00
Video Cassette Players-0.0060.00
VCR & VCP-0.0072.34
Video Cassette Moulds-0.000.00
Video Cassette Assembly-0.000.00
Video Camera-0.0062.18
Video Studio0.000.00
Video Cassette Tape-0.000.00
Voltage Regulator for Automobile-0.000.00
Voltage Stabilizers-0.0036.52
Voltage Stabilizers-0.0036.52
Washing Machine0.000.00
Washing Machine & Geyser-0.0047.38
Welding Electrodes-0.0063.11
Wire Wound Potentiometers-0.000.00
Wire Wound Potentiometees-0.0045.74
Wire Wound Resistors-0.000.00
Welding Electrodes-0.0060.00
X-Ray Film-0.0038.26
Ferrite Cores For Balun Deflection Components Coil Cores E & U-0.000.00

  • Cost is in Indian Rupee INR '00,000 (hundred thousand/Lakhs)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 4 of 5 | Total 473 projects in this category
« Previous   Page 1 2 3 4 5   Next »


Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top