WhatsApp us
Request a Quote

Project reports in Building Materials

Plaster of Paris Manufacturing Project Report

Plant cost, calciner and machinery, gypsum sourcing and five-year profitability for a POP unit, with a free sample project report PDF you can open now.

Also known as: POP, calcined gypsum, calcium sulphate hemihydrate, calcium sulfate hemihydrate, gypsum plaster

Plant capacity
20 MT per day
Total project cost
₹146 lakh
Plant and machinery
₹79 lakh
Return on investment
23% (Year 3)
Break-even
38% of capacity
Payback period
About 3.5 years

Figures from our illustrative sample report for a typical unit. They show the format of an NPCS report and are not quotes for your project.

What is a plaster of paris project report?

A plaster of Paris project report is a detailed project report (DPR) for a unit that heats crushed gypsum into a fast-setting white powder. It covers gypsum sourcing, calcination, machinery, market, project cost, means of finance, five-year projections, DSCR and break-even.

Entrepreneurs use it to size the plant and apply for a term loan or subsidy; bankers use it to judge whether the unit can repay.

Also known as: POP, calcined gypsum, calcium sulphate hemihydrate, calcium sulfate hemihydrate, gypsum plaster.

What a bank checks in a plaster of Paris project report

POP is a low-price, high-volume product, so a credit officer looks hard at the few costs that eat the margin. These are the values in our sample report and why each one matters.

44.6%Raw material share of sales

Delivered gypsum is the biggest cost. A report that prices gypsum at the mine gate and ignores freight will show profit the plant never earns.

13.4%Power and fuel share of sales

Calcination burns fuel for every tonne. Banks compare this line with the calciner's rated fuel use and local coal, wood or oil prices.

30 daysCredit given to buyers

Receivables are the largest current asset in the sample. Contractors often pay late, which sets the size of the cash credit limit.

1.64Lowest DSCR, Year 2

Debt service coverage ratio (DSCR) is cash available for loan repayment divided by the instalment. Lenders usually want every year to stay comfortably above 1.

Values are the assumptions in our illustrative sample. Your report uses figures for your gypsum source, fuel and buyers.

Plaster of Paris manufacturing plant cost in India

Cost depends mainly on daily output and the type of calciner. Small units use batch kettles or brick-lined furnaces; larger plants run continuous rotary calciners with fine grinding and dust control.

Small batch unit

₹35–70 lakh

About 5–8 MT per day, batch kettle or furnace

  • Machinery₹15–30 lakh
  • Shed and fit-out (or rent)₹10–25 lakh
  • Working capital margin₹3–8 lakh

May fit PMEGP or Mudra, subject to limits

Our sample report

Mid-size unit

₹146 lakh

20 MT per day, 6,600 MT per year

  • Plant and machinery₹79 lakh
  • Land and building₹42 lakh
  • Working capital margin₹6 lakh

Term loan ₹109 lakh (75%), promoter ₹36 lakh

Large unit

₹2.5–4 crore

About 40–60 MT per day, continuous line

  • Machinery₹1.5–2.4 crore
  • Land and building₹60–100 lakh
  • Working capital margin₹15–30 lakh

MSME term loan, often with CGTMSE cover

Small and large ranges are indicative. Land cost varies widely between a mining district and an industrial estate near a city.

POP plant economics in our sample report

The sample models a 20 MT per day unit working 330 days a year, starting at 60% capacity and reaching 80% in Year 5. Plaster is sold at ₹6,450 per MT ex-factory, before GST, and the unit runs with 8 people.

₹146 lakhTotal project cost
₹298 lakhSales in Year 3
₹33 lakhNet profit in Year 3
1.87Average DSCR
Cost of project (₹ lakh)
Land and site development12.40
Building and civil works29.54
Plant and machinery79.06
Other fixed assets9.44
Contingencies5.43
Preliminary and pre-operative3.40
Working capital margin6.41
Total145.68
Means of finance (₹ lakh)
Promoter's contribution (25%)36.42
Term loan from bank (75%)109.26
Cash credit limit (separate)19.24
Total project cost145.68

Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.

Plaster of Paris manufacturing process

Plaster of Paris is calcium sulphate hemihydrate. Heating turns gypsum, the dihydrate CaSO4·2H2O, into the hemihydrate CaSO4·½H2O by driving off one and a half molecules of water. The whole skill of the plant lies in controlling that heat.

  1. Crushing

    Gypsum lumps from the mine are broken to under 25 mm in a jaw crusher, after hand-sorting out red or grey stone.

  2. Pulverising

    A hammer mill grinds the crushed rock to powder so that every particle heats at the same rate in the calciner.

  3. Calcination

    The powder is heated at about 130–160°C until three quarters of its combined water leaves as steam; underheating leaves slow-setting gypsum, overheating makes dead-burnt anhydrite.

  4. Cooling and ageing

    Hot plaster is cooled and rested in silos so that its setting time steadies before grinding.

  5. Fine grinding and classifying

    A mill with an air classifier brings the plaster to the fineness that ceiling, mould or casting buyers specify.

  6. Testing and packing

    Each batch is checked for setting time, fineness and strength, then packed in 25 kg or 40 kg valve bags.

Batch or continuous: a batch kettle or brick furnace is cheaper to buy. A rotary calciner gives a steadier setting time, which ceramic and mould buyers pay for.

Gypsum and other raw materials for POP

Rajasthan produced almost all of India's reported gypsum in 2021–22 and holds about 81% of its gypsum resources, according to the Indian Bureau of Mines. Pure gypsum loses about 15.7% of its weight in calcination, so one MT of plaster needs at least 1.19 MT of gypsum, more when the rock carries clay.

Raw material cost in Year 3 of the sample
Raw materialShare of costYear 3 (₹ lakh)
Natural gypsum lumps (including freight)92%122.34
Setting control additives8%10.64
Total100%132.98

Surgical-grade plaster needs gypsum of at least 96% purity (Indian Bureau of Mines). Phosphogypsum, a by-product of fertiliser plants, is an alternative feed but needs treatment before it gives a steady plaster.

Machinery for a plaster of Paris plant

The rotary calciner is the largest single item, at a third of the machinery cost in the sample. Dust control is not optional: fine plaster escapes at every transfer point.

MachineWhat it doesSample cost (₹ lakh)
Jaw crusherBreaks mined lumps6.32
Hammer mill pulveriserGrinds gypsum before heating9.49
Bucket elevators and screw conveyorsMove powder between stages7.91
Rotary calciner with furnace and hot air systemConverts gypsum to plaster26.09
Cooling and ageing silosSteady the setting time6.32
Fine grinding mill with air classifierSets final fineness9.49
Pulse jet bag filter dust collectorCaptures plaster dust7.12
Automatic valve bag packing machineFills 25 kg or 40 kg bags6.32
Total plant and machinery79.06

Costs are the sample report's estimates for a 20 MT per day line. Get current quotations before you finalise.

Who buys plaster of Paris in India?

Demand comes from interior finishing and from small industries that cast shapes. False ceilings, cornices and wall finishing take the largest volume; ceramic, sanitaryware and idol makers buy for moulds and need tighter setting time. Idol makers buy heavily in the weeks before festivals, so plan stock and credit for that season.

  • False ceiling and interior contractors
  • Building-material and hardware dealers
  • Ceramic and sanitaryware manufacturers
  • Idol, statue and handicraft makers
  • Chalk and crayon makers
  • Dental and orthopaedic product makers

Where to locate: a unit near the gypsum belt of Bikaner, Nagaur and Barmer buys rock cheaply. A unit near a big city saves freight on finished plaster. Your report should compare both on delivered cost per bag.

Licences, BIS standards and GST for a POP unit

Business registrationUdyam (MSME) registration and GST registration
GST rateHSN 2520 (gypsum, anhydrite, plasters): 5% (2.5% CGST plus 2.5% SGST) from 22 September 2025
Pollution board consentConsent to establish and operate; "Manufactures of Plaster of Paris and Allied Products" appears in the green category list of state boards, but confirm with your State Pollution Control Board
Product standardsIS 2547 (Part 1) for gypsum building plaster; IS 2333:2025 for plaster of Paris used in the ceramic and glass industry
Quality Control OrderThe Gypsum based Building Materials QCO, 2024 covers plaster boards and panels; POP powder is not in its schedule as of October 2026
Factory and fireFactory licence where worker and power thresholds apply, and fire NOC for the fuel store and furnace; rules vary by state

Mistakes that weaken a POP project report

  • Pricing gypsum at the mine gate

    Gypsum is heavy and cheap, so freight from Rajasthan adds sharply to cost for distant units. Leaving it out makes raw material cost and DSCR look better than they are.

  • Ignoring the water loss

    Output must allow for the 15.7% weight lost in calcination plus impurities; a one-to-one gypsum ratio overstates sales.

  • One price for every grade

    Ceiling grade, mould grade and surgical grade sell at very different prices and need different gypsum purity.

  • No dust collector in the budget

    Leaving out the bag filter cuts machinery cost on paper but can stall pollution consent and lose product.

  • Storage without moisture control

    Plaster absorbs moisture and its setting time drifts; covered, dry storage and stock rotation must be costed.

How NPCS helps you set up a plaster of Paris unit

  • Grade and capacityPick ceiling, mould or casting grade and the output that suits your buyers.
  • Gypsum and location studyCompare delivered gypsum and freight for sites near the mines or near the market.
  • Bank-ready project reportProjections, DSCR and working capital in the format your lender wants.
  • Calciner and layoutCompare batch and rotary calciners and plan layout, fuel and dust control.

NPCS's client list shows 23 assignments for cement, lime and gypsum product units, including gypsum product, ready mix plaster and gypsum board studies in India and abroad.

What's inside the plaster of paris sample report

  1. Introduction
  2. Uses and applications
  3. Market potential
  4. Manufacturing process
  5. Raw materials
  6. Plant and machinery
  7. Land, building and utilities
  8. Manpower
  9. Licences and approvals
  10. Project cost and means of finance
  11. Working capital
  12. Projected profitability
  13. Cash flow statement
  14. Projected balance sheet
  15. Depreciation
  16. Term loan repayment
  17. Debt service coverage
  18. Break-even analysis
  19. Financial ratios
  20. Key assumptions
  21. Conclusion
  22. Monthly loan repayment schedule

18 pages, five-year projections, illustrative figures.

Open sample report

Free sample or a report for your project?

What you getFree sampleNPCS report for your project
Capacity and locationTypical unitYour capacity, site and state
FiguresIllustrativeBuilt on current prices and quotations
Machinery suppliers and quotationsNoYes
Market survey for your regionNoYes
Bank or scheme format (PMEGP, term loan)NoYes
Use for a loan applicationNoYes

Real NPCS plaster of paris project reports

These are plaster of paris project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.

Project reportPlant capacityTotal investmentRate of returnBreak-evenAction
Rubber Compound Toys (Using Plaster Of Paris)1500 Nos./Day₹61 lakh56%40% Get this report
Plaster of Paris EmulsionPlaster of Paris Emulsion Paint (each Container 10 Kgs Size):200 Packs per day₹1.14 crore31%73% Get this report
Rubber Compound Toys (using Plaster of Paris)15 Lakh Pcs. /Annum₹2.99 crore24%57% Get this report
Plaster of Paris50 MT / Day 1500 MT / Annum₹3 crore49%45% Get this report
Rubber Compound Toys (using Plaster of Paris)500 Pcs./ day₹3.62 crore46%41% Get this report
Gypsum Mining for Production of Plaster of Paris PowderGypsum Powder: 4800 MT/Day Plaster of Paris Powder: 7200 MT/Day₹3948 crore16%50% Get this report

Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.

Find other projects that fit your budget Search NPCS project profiles by investment, return and break-even, the same search as our Startup Selector.

What clients say about NPCS

4.7

264 Google reviews, as of 20 Oct 2026

Clients most often mention

  • feasibility reports 18
  • project report 16
  • helpful for startups 15
  • detailed reports 8
Read all reviews on Google
  • Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.

    Piyush Singh, Google review, 2026

  • Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended

    Saroj Yadav, Google review, 2026 View on Google

  • In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.

    Shrishti Gautam, Google review, 2026

  • NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.

    Raj Yadav, Google review, 2026

Plaster of Paris project report: frequently asked questions

How much does it cost to start a plaster of Paris manufacturing unit?

A small batch unit of 5–8 MT per day needs roughly ₹35–70 lakh, while a 40–60 MT per day plant needs about ₹2.5–4 crore. Our sample report models a 20 MT per day unit at ₹145.68 lakh, including land, building and working capital margin. These are indicative figures; your project report works out the cost for your site and capacity.

How much gypsum is needed to make one tonne of POP?

Pure gypsum loses about 15.7% of its weight as water when it turns into plaster, so one tonne of POP needs roughly 1.19 tonnes of pure gypsum. Mined gypsum carries clay and sand, so plants usually plan for about 1.2–1.3 tonnes. The purer the rock, the whiter the plaster and the better its price.

What is the manufacturing process of plaster of Paris?

Gypsum lumps are crushed, pulverised and heated in a calciner at about 130–160°C until three quarters of their combined water is driven off. The hot plaster is cooled and aged in silos, ground again to the required fineness, tested for setting time and strength, and packed in 25 kg or 40 kg bags.

Is plaster of Paris manufacturing profitable?

In our illustrative sample, a 20 MT per day unit earns a 22.6% return on investment in Year 3. It breaks even at 37.8% of capacity and pays back in about 3.5 years. Real results depend on delivered gypsum cost, fuel price, whiteness of the product and how much credit dealers and contractors demand.

Can I get a PMEGP or Mudra loan for a POP unit?

A small POP unit can fit PMEGP, which covers manufacturing projects up to ₹50 lakh with a margin-money subsidy of 15–35%. Mudra loans go up to ₹20 lakh under Tarun Plus. A 20 MT per day plant like our sample is larger, so it usually needs an MSME term loan, often with CGTMSE guarantee cover.

What is the difference between plaster of Paris and gypsum plaster?

Plaster of Paris is calcined gypsum on its own, so it sets in minutes and suits moulds, ceilings and casts. Gypsum building plaster sold for walls is usually the same calcined gypsum with retarders and other additives that slow setting and improve workability. IS 2547 covers gypsum building plaster; IS 2333 covers POP for ceramic and glass work.

Is the sample report free and can I use it for a loan?

The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS project report; its figures are representative and not based on a real project. It should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and loan scheme.

Sources and references

  1. Indian Minerals Yearbook 2022: Gypsum and seleniteIndian Bureau of Mines, checked Oct 2026
  2. Plaster of Paris (beta hemihydrate) technology sheetCSIR-Central Building Research Institute, checked Oct 2026
  3. IS 2547 (Part 1):1976 Gypsum building plasterBureau of Indian Standards, checked Oct 2026
  4. IS 2333:2025 Plaster of Paris for ceramic and glass industryBureau of Indian Standards, checked Oct 2026
  5. Gypsum based Building Materials (Quality Control) Order, 2024Ministry of Commerce and Industry, Gazette of India, checked Oct 2026
  6. Notification No. 9/2025-Central Tax (Rate)Ministry of Finance (copy published by EPCES), checked Oct 2026
  7. Green category industries, revised 2020Puducherry Pollution Control Committee, checked Oct 2026
  8. Prime Minister Employment Generation ProgrammeMSME Department, Government of Uttar Pradesh, checked Oct 2026
  9. Pradhan Mantri Mudra Yojana: Tarun PlusPress Information Bureau, checked Oct 2026
  10. Credit Guarantee Fund Trust for Micro and Small EnterprisesCGTMSE, checked Oct 2026

Recommended reading on plaster of paris

Ajay Kumar Gupta, founder of NPCS

Who prepares NPCS reports

The NPCS project team, led by Ajay Kumar Gupta

This page and its sample report are prepared and reviewed by the NPCS project team, which has written techno-economic feasibility studies and detailed project reports since 1994.

Ajay Kumar Gupta founded Niir Project Consultancy Services (NPCS) and leads the organisation. With 40 years of experience in MSME project consulting, he has built the team that has delivered more than 28,000 project reports for clients worldwide, helping entrepreneurs plan and finance profitable manufacturing businesses.

Ajay Kumar Gupta on LinkedIn

Published
Last updated
Next review
Oct 2027
Reviewed by
NPCS project team

This page is reviewed every 12 months, or sooner when scheme limits, GST rates, BIS rules or pollution categories change. The sample report is illustrative: its figures are generated from industry-typical ratios for a unit of this size, checked so every statement balances, and are not taken from any client project.

Planning a different building materials project?

These are a few of the projects we advise on. NPCS's published client list records 23 building materials assignments, so tell us what you are planning.

Tell us your project

Recent building materials assignments

  • Shyam Steel Manufacturing Limited
    Techno-Economic Project Study on Low Relaxation Prestressed Concrete Steel Strand manufactBankura, 2025
  • Onshore Infra FZCO
    Detailed Project Report on Cement Plant with PowerUAE, 2023
  • Shree Industries Pvt Ltd
    Techno-Economic Project Report on Ready Mix PlasterDadra, 2022
  • Amana Industries
    Technical and Financial Feasibility Report on Steel Epoxy Putty StickThane, 2022
  • NU-Horizen Metchem Pvt. Ltd
    Techno-Economic Project Study on Calcium Carbide (CaC2)Chikkantapur, 2021
  • Kao Corporation Attention
    Techno-Economic Project Study on Gypsum and Gypsum Based ProductsJapan, 2021
  • Galfar Engineering & Contracting
    Industrial Project Report on Magnesium Powder from Dolomite StoneOman, 2021
  • Khushbu Steels
    Techno-Economic Project Study on Gypsum Plaster BoardAhmedabad, 2019

Get a plaster of paris project report for your plant

Tell us your planned capacity, location and loan scheme. Our team will confirm the scope and price of a report built on current machinery quotations and raw material prices for your region.

Reports are prepared in the format banks and PMEGP offices ask for, with five-year projections, DSCR and break-even.

Request a Plaster of Paris Project Report

Share your plan and our team will call you back within 24 hours.

Start with the sample, then plan your own unit

Open the free plaster of paris sample report to see the format, then talk to NPCS about a report for your capacity and location.

Sample PDF WhatsApp
Plaster of Paris sample project report (illustrative) Download New tab

Illustrative sample. Figures are representative and not from a real project.

Call Us WhatsApp