WhatsApp us
Request a Quote

Project reports in Paints and Coatings

Flexographic Inks Manufacturing Project Report

Plant cost, machinery, raw materials and five-year profitability for a flexo ink unit, with a free sample project report PDF you can open right now.

Also known as: flexo ink, flexo printing ink

Plant capacity
1,300 kg per day
Total project cost
₹362 lakh
Plant and machinery
₹174 lakh
Return on investment
22% (Year 3)
Break-even
43% of capacity
Payback period
About 3.6 years

Figures from our illustrative sample report for a typical unit. They show the format of an NPCS report and are not quotes for your project.

What is a flexographic inks project report?

A flexographic inks project report is a detailed project report (DPR) for a unit that makes the thin, fast-drying liquid inks used on flexo presses, in solvent-based and water-based grades. It sets out the process, disperser and bead mill line, pigments and resins, market, project cost, five-year projections, DSCR and break-even that a lender needs.

First-time entrepreneurs and existing chemical or ink units use it to size the plant and apply for a term loan or PMEGP; banks use it to judge repayment capacity.

Also known as: flexo ink, flexo printing ink.

What a bank checks in a flexographic inks project report

A credit officer reads an ink project for four things: how much of each rupee goes on materials, which input drives that cost, how long buyers take to pay and whether the loan is covered every year. These are the values in our sample report.

52.4%Raw material share of sales

Ink is a formulation business, so materials are over half of revenue. A report showing far less is usually overstating margin.

35%Pigment share of raw material cost

Pigment is the costliest input in the formula. Banks like to see what a 10% rise in its price does to profit and DSCR.

45 daysCredit given to converters

Packaging printers buy on credit. Receivables are the largest part of working capital, so they set the cash credit limit.

1.55Lowest yearly DSCR

The debt service coverage ratio (cash available for each rupee of loan repayment) dips in Year 2, when full instalments start.

Values are the assumptions in our illustrative sample. Your report uses figures for your capacity, suppliers and market.

Flexographic inks manufacturing plant cost in India

The sample report models a 1,300 kg per day unit working 300 days a year, starting at 60% capacity and reaching 80% in Year 5. Selling price is taken at ₹330 per kg, and the plant employs 31 people.

₹362 lakhTotal project cost
₹901 lakhSales in Year 3
₹78 lakhNet profit in Year 3
1.79Average DSCR
Cost of project (₹ lakh)
Land and site development33.01
Building and civil works82.31
Plant and machinery174.46
Other fixed assets20.64
Contingencies12.84
Preliminary and pre-operative8.08
Working capital margin30.88
Total362.22
Means of finance (₹ lakh)
Promoter's contribution (25%)90.56
Term loan from bank (75%)271.66
Cash credit limit (separate)92.64
Total project cost362.22

Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.

Flexographic inks manufacturing process

Flexo ink is made in batches, one colour at a time. The aim is to break pigment into fine particles and coat each one with resin. The finished ink must hold a low, steady viscosity so it transfers cleanly from the anilox roll to the plate.

  1. Varnish preparation

    Polyamide or nitrocellulose resin is dissolved in alcohol and acetate solvents, or acrylic resin is let down in water, in a stirred tank.

  2. Premixing

    Pigment powder is fed slowly into part of the varnish under a high-speed disperser to wet it and break up lumps.

  3. Bead milling

    The premix is pumped through a bead mill filled with ceramic beads until a grind gauge shows the fineness the grade needs.

  4. Let-down

    The milled base is thinned with the rest of the varnish, solvent and additives such as wax for rub resistance and defoamer.

  5. Testing

    Each batch is drawn down against the standard for shade, checked on a flow cup for viscosity, and tested for adhesion and drying.

  6. Filtering and filling

    The ink is filtered to remove oversize particles and filled in sealed drums or cans carrying the batch number.

Raw materials for flexo ink manufacturing

Pigment and resin together make up two thirds of material cost in the sample. Phthalocyanine pigments give the blues and greens, azo pigments the yellows and reds, and carbon black the black; titanium dioxide whites are made as a separate grade. The resin is chosen by substrate, so a film ink and a corrugated ink share few inputs.

Raw material cost in Year 3 of the sample report
Raw materialShare of costYear 3 (₹ lakh)
Organic pigments and carbon black35%165.36
Binder resins (polyamide, nitrocellulose, acrylic)30%141.73
Solvents (ethanol, n-propyl acetate, IPA)25%118.11
Additives (waxes, plasticisers, defoamers)10%47.24
Total100%472.44

Inks for food packaging must avoid the pigments, solvents and plasticisers that IS 15495 excludes, which narrows the choice of raw materials.

Machinery for a flexographic ink plant

The line is compact. Most of the money goes into grinding and premixing, and in the sample the bead mill is the single largest item.

MachineWhat it doesSample cost (₹ lakh)
High-speed disperserWets pigment in varnish and breaks lumps43.61
Horizontal bead millGrinds pigment to final fineness52.34
Mixing and storage tanksHold varnish, base and let-down batches34.89
Filtration and filling unitFilters ink and fills drums and cans26.17
Quality control labShade matching, viscosity and adhesion tests17.45
Total plant and machinery174.46

Costs are the sample report's estimates for a 1,300 kg per day line. Ask for flameproof motors in the solvent area and get current quotations before you finalise.

Who buys flexographic inks?

Flexo inks are bought by converters, not by the brands whose names appear on the pack. Demand follows packaged food, FMCG and e-commerce shipping, which keep flexible pouches, labels and corrugated boxes moving through flexo presses every day.

Converters judge an ink supplier on shade match, viscosity that holds steady through a long run, and how quickly a top-up drum arrives. Solvent inks go mainly to film printers, while water-based inks go to box, bag and paper printers.

  • Flexible packaging and lamination converters
  • Label printers
  • Corrugated box and carton makers
  • Paper bag, cup and wrapper printers
  • Woven sack and leno bag makers

Where a new unit wins: small and mid-size printers value service as much as price. A regional unit with a good colour-matching lab and next-day delivery can win them away from distant suppliers.

Licences and approvals for a flexographic ink unit

Solvent storage and food packaging rules are the two approvals specific to ink. The rest follow any small chemical unit. Rules below were checked in October 2026.

Business registrationUdyam (MSME) registration and GST registration
Pollution board consentConsent to establish and operate from the State Pollution Control Board. Printing ink manufacturing appears in the Orange category list published by the Odisha board; check your own state's list
Solvent storageUnder the Petroleum Rules, 2002, toluene, xylene and hexane are petroleum. Class A petroleum needs no licence below 30 litres, a district licence for 30 to 300 litres and a PESO licence above that
Food packaging inksThe FSSAI Packaging Regulations require printing inks on food packages to conform to IS 15495, which excludes lead, cadmium and other heavy-metal pigments, and solvents such as benzene and methanol
Factory and fireFactory registration where worker thresholds apply, and a fire NOC for stored flammable solvents; rules vary by state

Loans and schemes for a flexo ink unit

PMEGP

Manufacturing projects up to ₹50 lakh

Margin-money subsidy of 15–35% for new units. Suits a small water-based ink unit in a rented shed.

Mudra

Smaller loans for micro units

For a first unit with a disperser, a small bead mill and a basic lab, or for working capital.

MSME term loan with CGTMSE

Mid-size units like the sample

The sample's ₹272 lakh term loan sits here. CGTMSE cover can reduce the collateral asked for eligible units.

Scheme limits change. Confirm current terms with the bank or the scheme portal before applying.

Mistakes that weaken a flexo ink project report

  • One price for every kilogram

    Process colours, whites, blacks and water-based grades sell at different rates. Revenue should follow a realistic product mix, not the best-selling shade.

  • No solvent loss in the yield

    Solvent evaporates during milling and is used to wash tanks and mills between colours. Leaving this out overstates output and margin.

  • Skipping the colour lab

    Converters reorder only when the shade matches. A report without lab staff, proofing and shade standards misses a real running cost.

  • Thin working capital

    In our sample, receivables alone are ₹95.20 lakh in Year 1. A cash credit limit sized without converter credit runs dry early.

  • Shed chosen before the storage check

    Solvent tanks need safe distances and, above the exempt limit, a licence. Check this before signing a lease.

How NPCS helps you set up a flexographic ink unit

  • Segment and ink rangeDecide between solvent and water-based inks, and the colours and grades to launch with.
  • Formulation inputs and suppliersPigment, resin and solvent sources, with machinery quotations for the disperser and bead mill.
  • Bank-ready project reportProjections, DSCR and working capital in the format your lender or PMEGP office wants.
  • Layout and approvalsPlant layout with a separate solvent area and the approvals list for your state.

NPCS's client list shows 35 assignments in paints, inks and coatings. The NPCS project team, led by founder Ajay Kumar Gupta, has prepared project reports for entrepreneurs, banks and companies since 1994.

What's inside the flexographic inks sample report

  1. Introduction
  2. Uses and applications
  3. Market potential
  4. Manufacturing process
  5. Raw materials
  6. Plant and machinery
  7. Land, building and utilities
  8. Manpower
  9. Licences and approvals
  10. Project cost and means of finance
  11. Working capital
  12. Projected profitability
  13. Cash flow statement
  14. Projected balance sheet
  15. Depreciation
  16. Term loan repayment
  17. Debt service coverage
  18. Break-even analysis
  19. Financial ratios
  20. Key assumptions
  21. Conclusion
  22. Monthly loan repayment schedule

18 pages, five-year projections, illustrative figures.

Open sample report

Free sample or a report for your project?

What you getFree sampleNPCS report for your project
Capacity and locationTypical unitYour capacity, site and state
FiguresIllustrativeBuilt on current prices and quotations
Machinery suppliers and quotationsNoYes
Market survey for your regionNoYes
Bank or scheme format (PMEGP, term loan)NoYes
Use for a loan applicationNoYes

Real NPCS flexographic inks project reports

These are flexographic inks project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.

Project reportPlant capacityTotal investmentRate of returnBreak-evenAction
Flexographic Ink(for Milk Pouches, Soap Covers, Woven Sacks & Jute Bags)R Non-Absorbent Substrate Flexographic Ink: 160 Kgs Per Day | R Absorbent Substrate Flexographic Ink: 160 Kgs Per Day₹64 lakh27%55% Get this report
Flexographic Inks500 Kg./Day₹1.39 crore47%41% Get this report

Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.

Find other projects that fit your budget Search NPCS project profiles by investment, return and break-even, the same search as our Startup Selector.

What clients say about NPCS

4.7

264 Google reviews, as of 20 Oct 2026

Clients most often mention

  • feasibility reports 18
  • project report 16
  • helpful for startups 15
  • detailed reports 8
Read all reviews on Google
  • Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.

    Piyush Singh, Google review, 2026

  • Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended

    Saroj Yadav, Google review, 2026 View on Google

  • In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.

    Shrishti Gautam, Google review, 2026

  • NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.

    Raj Yadav, Google review, 2026

Flexographic Inks project report: frequently asked questions

What is the flexographic inks manufacturing plant cost in India?

Our illustrative sample report puts a 1,300 kg per day unit at ₹362 lakh in total. Of this, plant and machinery is ₹174 lakh and the working capital margin is ₹30.88 lakh. A small unit making only water-based inks in a rented shed costs far less. Your own report works out the cost for your capacity, ink range and location.

What raw materials are used to make flexographic ink?

Flexo ink is made from pigment, a binder resin, solvent and a few additives. Solvent inks use polyamide or nitrocellulose resin in alcohol and acetate blends; water-based inks use acrylic resins in water. In our sample report pigments are the largest cost at 35% of raw material spend, followed by resins at 30% and solvents at 25%.

Which machines are needed for flexo ink manufacturing?

The core line is a high-speed disperser for premixing and a bead mill for grinding pigment. Add mixing and storage tanks, a filtration and filling unit, and a quality control lab. Equipment in the solvent area should have flameproof motors and earthing. In our sample the bead mill is the costliest machine at ₹52.34 lakh.

What is the difference between water-based and solvent-based flexo inks?

Solvent-based flexo inks dry fast and grip non-absorbent films such as polyethylene and BOPP, so flexible packaging printers use them. Water-based inks dry by absorption and evaporation and suit paper, board and corrugated boxes. Water-based lines avoid most solvent storage rules, while solvent lines need safe storage, flameproof equipment and a check under the Petroleum Rules.

Is flexographic ink manufacturing profitable?

In our illustrative sample, a 1,300 kg per day unit earns a net profit of ₹78 lakh on sales of ₹901 lakh in Year 3. Return on investment is 22% in Year 3, break-even is at 43% of capacity and payback takes about 3.6 years. Real results depend on pigment prices, your product mix and how fast converters pay.

Flexo ink ka business kaise shuru kare?

Start by choosing your segment: water-based inks for corrugated and paper, or solvent inks for films. Then fix capacity, find a shed with safe solvent storage, buy a disperser, bead mill and lab equipment, and register on Udyam. A bank-format project report with projections and DSCR is needed for a PMEGP or term loan application.

Is the flexographic inks project report PDF free, and can I use it for a bank loan?

The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report. Its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and loan scheme.

Sources and references

  1. Food Safety and Standards (Packaging) Regulations, 2018: compendiumFood Safety and Standards Authority of India, checked Oct 2026
  2. IS 15495: Printing ink for food packaging, code of practiceBureau of Indian Standards (public copy), checked Oct 2026
  3. Revised FAQs on Petroleum Rules, 2002Petroleum and Explosives Safety Organisation, checked Oct 2026
  4. Requirement of licence under Petroleum Rules, 2002 for storage of petroleumPetroleum and Explosives Safety Organisation, checked Oct 2026
  5. List of Orange category industriesState Pollution Control Board, Odisha, checked Oct 2026
  6. Prime Minister Employment Generation Programme (PMEGP)MSME Department, Government of Uttar Pradesh, checked Oct 2026
Ajay Kumar Gupta, founder of NPCS

Who prepares NPCS reports

The NPCS project team, led by Ajay Kumar Gupta

This page and its sample report are prepared and reviewed by the NPCS project team, which has written techno-economic feasibility studies and detailed project reports since 1994.

Ajay Kumar Gupta founded Niir Project Consultancy Services (NPCS) and leads the organisation. With 40 years of experience in MSME project consulting, he has built the team that has delivered more than 28,000 project reports for clients worldwide, helping entrepreneurs plan and finance profitable manufacturing businesses.

Ajay Kumar Gupta on LinkedIn

Published
Last updated
Next review
Oct 2027
Reviewed by
NPCS project team

This page is reviewed every 12 months, or sooner when scheme limits, GST rates, BIS rules or pollution categories change. The sample report is illustrative: its figures are generated from industry-typical ratios for a unit of this size, checked so every statement balances, and are not taken from any client project.

Planning a different paints and coatings project?

These are a few of the projects we advise on. NPCS's published client list records 35 paints and coatings assignments, so tell us what you are planning.

Tell us your project

Recent paints and coatings assignments

  • Precise Diagnostic & Medical Suppliers Ltd
    Technical and Financial Feasibility Report on InksUganda, 2025
  • Issa Deadea
    Project Feasibility Report on Market research and production feasibility of varnish for inNigeria, 2024
  • Thermax Limited Chemical Divison
    Detailed Feasibility Study on Acrylate Resins and EmulsionsBharuch, 2023
  • Kampala Cement Co. Limited
    Comprehensive Market Research Report on Red Oxide PigmentUganda, 2023
  • ObedMugarura
    Comprehensive Market Research Report on Paint IndustryUganda, 2022
  • Supram Enterprises
    Techno-Economic Project Study on Red Oxide PrimerGujarat, 2020
  • Rafael Sala
    Techno-Economic Feasibility Report on Surface CoatingUSA, 2019
  • Josep Maria Minguell Font
    Detailed Feasibility Study on Printing& Writing InksSpain, 2019

Get a flexographic inks project report for your plant

Tell us your planned capacity, location and loan scheme. Our team will confirm the scope and price of a report built on current machinery quotations and raw material prices for your region.

Reports are prepared in the format banks and PMEGP offices ask for, with five-year projections, DSCR and break-even.

Request a Flexographic Inks Project Report

Share your plan and our team will call you back within 24 hours.

Start with the sample, then plan your own unit

Open the free flexographic inks sample report to see the format, then talk to NPCS about a report for your capacity and location.

Sample PDF WhatsApp
Flexographic Inks sample project report (illustrative) Download New tab

Illustrative sample. Figures are representative and not from a real project.

Call Us WhatsApp