WhatsApp us
Request a Quote

Project reports in Beverages

Carbonated Soft Drink Manufacturing Project Report

Plant cost, machinery, sugar and PET packing costs and five-year profitability for a soft drink bottling unit, with a free sample report PDF you can open now.

Plant capacity
11,000 litres per day
Total project cost
₹260 lakh
Plant and machinery
₹135 lakh
Return on investment
14% (Year 3)
Break-even
49% of capacity
Payback period
About 4.5 years

Figures from our illustrative sample report for a typical unit. They show the format of an NPCS report and are not quotes for your project.

What is a carbonated soft drink project report?

A carbonated soft drink project report is a detailed project report (DPR) for a unit that treats water, makes sugar syrup, carbonates it and fills PET bottles. It sets out the process, machinery, raw materials, packing cost, project cost, means of finance, five-year projections, DSCR and break-even a lender needs.

Entrepreneurs use it to size a bottling line and apply for a term loan or PMEGP; banks use it to judge whether the unit can repay through the seasonal swings in demand.

Also known as: carbonated soft drink business plan, cold drink factory project report, soda water plant project report, aerated drink manufacturing DPR.

What a bank checks in a carbonated soft drink project report

A soft drink unit sells a cheap product in large volumes, so small errors in packing, sugar or capacity use swing the result. These are the values in our sample report and why a credit officer looks at each one.

28.4%Packing cost as a share of sales

PET preforms, caps, labels and shrink film cost more than the drink inside. A report that shows packing far below raw materials has usually missed the preform price.

68%Sugar share of raw material cost

Sugar is the largest input by far. Lenders check the sugar price used and whether the report tests a rise, since sugar prices move with each crushing season.

1.42Average DSCR, lowest year 1.24

Debt service coverage ratio (DSCR) is cash available divided by loan instalments due. Banks look at the weakest year, which in the sample is Year 2, when full instalments begin.

49%Break-even in Year 3

The unit must run at about half its capacity to cover costs. In a seasonal trade, the bank asks whether winter months can stay near that level.

Values are the assumptions in our illustrative sample. Your report uses figures for your capacity, suppliers and market.

Carbonated soft drink manufacturing plant cost in India

Cost depends on daily output, how automatic the filling line is and whether you blow your own bottles from preforms. The middle tier is the unit in our sample report; the other two are indicative ranges.

Small unit

₹30–60 lakh

About 1,500–3,000 litres per day, semi-automatic filling

  • Machinery₹15–30 lakh
  • Shed fit-out (or rent)₹5–15 lakh
  • Working capital margin₹3–8 lakh

Can fit PMEGP when the project stays within ₹50 lakh

Our sample report

Mid-size PET line

₹260 lakh

11,000 litres per day, 33,00,000 litres per year

  • Plant and machinery₹134.73 lakh
  • Land and building₹76.96 lakh
  • Working capital margin₹6.90 lakh

Term loan ₹195 lakh (75%), promoter ₹65 lakh

Large plant

₹8–15 crore

About 40,000–80,000 litres per day, in-house bottle blowing

  • Machinery₹4–8 crore
  • Land and building₹2–4 crore
  • Working capital margin₹0.5–1 crore

Bank term loan with a larger promoter share

Small and large ranges are indicative and vary with location, line speed and machine make.

Soft drink plant economics in our sample report

This project report on carbonated soft drink models an 11,000 litres per day line running 300 days a year, starting at 60% capacity and reaching 80% in Year 5. The drink is sold at ₹22.10 per litre ex-factory, before GST.

₹260 lakhTotal project cost
₹511 lakhSales in Year 3
₹36 lakhNet profit in Year 3
1.42Average DSCR
Cost of project (₹ lakh)
Land and site development21.69
Building and civil works55.27
Plant and machinery134.73
Other fixed assets26.12
Contingencies9.50
Preliminary and pre-operative6.18
Working capital margin6.90
Total260.39
Means of finance (₹ lakh)
Promoter's contribution (25%)65.10
Term loan from bank (75%)195.29
Cash credit limit (separate)20.69
Total project cost260.39

Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.

Carbonated soft drink manufacturing process

Every flavour, from cola-type to orange, lemon or jeera soda, goes through the same eight stages. The two things that decide quality are clean water and cold product at the carbonator.

  1. Water treatment

    Bore or municipal water passes through sand and activated carbon filters and a reverse osmosis plant, which removes hardness, chlorine and off-tastes that would spoil the flavour.

  2. Simple syrup

    Sugar is dissolved in hot treated water, then filtered through a filter press with activated carbon to remove dirt and colour from the sugar.

  3. Final syrup

    Flavour concentrate, citric acid, sodium benzoate and colour are blended into the cooled syrup in the exact quantities of the batch recipe.

  4. Proportioning and chilling

    A proportioner mixes syrup and treated water in a fixed ratio, and the mix is chilled close to freezing, because cold liquid holds far more gas.

  5. Carbonation

    Food-grade carbon dioxide is dissolved into the chilled mix in the carbonator until it reaches the gas level set for that flavour.

  6. Filling and capping

    PET bottles are rinsed, filled under counter pressure so the gas does not escape, and capped in one monoblock machine.

  7. Coding and packing

    Bottles are labelled, printed with batch number, date and price, and shrink wrapped into packs for distributors.

  8. Quality release

    Each batch is tested for sugar content with a refractometer, gas volume, taste and microbial count before it leaves the plant.

Raw materials for carbonated soft drinks

Sugar is bought in 50 kg bags from mills or traders, and its price changes with each crushing season. Carbon dioxide comes in liquid form from gas suppliers, so a nearby source and a storage tank protect the plant from stoppages in summer.

Raw materialShare of costYear 3 (₹ lakh)
Sugar68%93.79
Flavour concentrates and emulsions16%22.07
Food-grade carbon dioxide8%11.03
Citric acid5%6.90
Sodium benzoate and permitted colours3%4.14
Total100%137.93

Raw materials are 27% of sales in the sample. PET preforms, caps, labels and shrink film are costed separately as packing, at 28.4% of sales.

Machinery for a soft drink bottling plant

The filling monoblock is the biggest single item in the sample and sets the output of the whole line. Stainless steel contact parts and a CIP cleaning system are expected by food safety inspectors.

MachineWhat it doesSample cost (₹ lakh)
Water treatment plant (sand, carbon filters and RO)Cleans and softens process water16.17
Sugar dissolving tanks and syrup filter pressMakes and filters the sugar syrup16.17
Water chiller and refrigeration plantCools the mix before carbonation13.47
Premix carbonator with proportioning unitMixes syrup and water, dissolves CO218.86
PET rinsing, filling and capping monoblockRinses, fills and caps bottles29.64
CO2 storage tank and vaporiserStores liquid CO2 and feeds gas8.09
Labelling and batch coding machinesApplies labels, prints batch and date8.08
Shrink wrapping machinePacks bottles into trade packs8.08
CIP system and quality control laboratoryCleans lines, tests each batch16.17
Total plant and machinery134.73

Costs are the sample report's estimates for an 11,000 litres per day line. Get current quotations before you finalise.

Market for carbonated soft drinks in India

Sales peak from March to June and again in the wedding season, and fall sharply in the monsoon and winter. Regional brands sell mostly in 200 ml to 600 ml PET bottles at lower price points than national brands, through distributors who supply kirana stores, dhabas and highway outlets.

A new unit wins on price, distributor margin and fast delivery within a few hundred kilometres. Local flavours such as jeera, masala and lemon soda give a regional brand a reason to be stocked next to national colas.

  • Distributors and super stockists
  • Kirana and grocery retailers
  • Hotels, restaurants and dhabas
  • Caterers and event organisers
  • Canteens and institutional buyers
  • Regional retail chains buying private label

Plan for the summer peak: a plant sized for average demand runs short in April and May. Build preform and sugar stock before March, and keep the line idle time for maintenance in the monsoon.

Licences, standards and GST for a soft drink unit

A beverage plant needs food safety approval in addition to the usual factory registrations. These are the main ones, checked against official sources in October 2026.

Business registrationUdyam (MSME) registration and GST registration
Food safetyFSSAI manufacturing licence; the drink must meet the non-alcoholic beverage standards under the Food Products Standards and Food Additives Regulations, 2011
Product standardIS 2346:1992, the BIS specification for carbonated beverages, is the usual quality reference
Pollution board consentConsent to establish and operate from the State Pollution Control Board; Odisha, for example, lists soft drink bottling under Orange category where wastewater is under 100 KLD
Plastic packaging EPRBrand owners using PET bottles register on the CPCB EPR portal; micro and small brand owners are exempt from registration
GST on the product40% from 22 September 2025 on aerated waters with added sugar or flavour (HSN 2202 10), up from 28%
Factory and fireFactory licence where worker and power thresholds apply, and fire NOC where required; rules vary by state

Mistakes that weaken a soft drink project report

  • Working sales from the MRP

    The MRP includes 40% GST and the retailer and distributor margins. Revenue must use the ex-factory price, or profit and DSCR come out far too high.

  • Treating packing as a small cost

    Bottles, caps, labels and film cost more than sugar and flavour together in the sample. Leaving out preform price rises hides the biggest risk.

  • Flat sales all year

    Demand drops in the monsoon and winter. A report that runs the plant evenly every month understates the working capital needed for the peak.

  • No allowance for gas and product loss

    Carbon dioxide is lost at start-up and filling, and some bottles fail on gas or fill level. Saleable output must allow for both.

How NPCS helps you set up a carbonated soft drink unit

  • Capacity and pack sizesPick daily output and the bottle mix that fits your area and budget.
  • Line and machinery choiceCompare semi-automatic and monoblock lines, carbonators and chillers, and get quotations.
  • Bank-ready project reportSeasonal projections, DSCR and working capital in the format your lender wants.
  • Approvals and layoutHygienic plant layout, water source, FSSAI and pollution board steps for your state.

NPCS, led by founder Ajay Kumar Gupta, has prepared project reports since 1994, and its client list shows 13 beverage assignments, 2 of them on carbonated soft drinks.

What's inside the carbonated soft drink sample report

  1. Introduction
  2. Uses and applications
  3. Market potential
  4. Manufacturing process
  5. Raw materials
  6. Plant and machinery
  7. Land, building and utilities
  8. Manpower
  9. Licences and approvals
  10. Project cost and means of finance
  11. Working capital
  12. Projected profitability
  13. Cash flow statement
  14. Projected balance sheet
  15. Depreciation
  16. Term loan repayment
  17. Debt service coverage
  18. Break-even analysis
  19. Financial ratios
  20. Key assumptions
  21. Conclusion
  22. Monthly loan repayment schedule

19 pages, five-year projections, illustrative figures.

Open sample report

Free sample or a report for your project?

What you getFree sampleNPCS report for your project
Capacity and locationTypical unitYour capacity, site and state
FiguresIllustrativeBuilt on current prices and quotations
Machinery suppliers and quotationsNoYes
Market survey for your regionNoYes
Bank or scheme format (PMEGP, term loan)NoYes
Use for a loan applicationNoYes

Real NPCS carbonated soft drink project reports

These are carbonated soft drink project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.

Project reportPlant capacityTotal investmentRate of returnBreak-evenAction
Carbonated Soft DrinkCarbonated Soft Drink (350ml size): 25,000 Crate Per Day Carbonated Soft Drink (500ml size): 16,666.66 Crate Per Day Carbonated Soft Drink (…₹1.2 lakh28%56% Get this report
PET Preform FOR Water AND Carbonated Soft Drinks With Closures (CAPS FOR THE BOTTLES)3940 Kg/ day (PET Preform 30, 15, 13 gms), 1450 Kg/ day (Caps for Bottles)₹5.07 crore30%60% Get this report

Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.

Find other projects that fit your budget Search NPCS project profiles by investment, return and break-even, the same search as our Startup Selector.

What clients say about NPCS

4.7

264 Google reviews, as of 20 Oct 2026

Clients most often mention

  • feasibility reports 18
  • project report 16
  • helpful for startups 15
  • detailed reports 8
Read all reviews on Google
  • Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.

    Piyush Singh, Google review, 2026

  • Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended

    Saroj Yadav, Google review, 2026 View on Google

  • In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.

    Shrishti Gautam, Google review, 2026

  • NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.

    Raj Yadav, Google review, 2026

Carbonated Soft Drink project report: frequently asked questions

How much does it cost to set up a carbonated soft drink plant in India?

A small semi-automatic unit making 1,500–3,000 litres a day needs roughly ₹30–60 lakh, and a high-speed plant of 40,000 litres a day or more needs ₹8–15 crore. Our sample report models an 11,000 litres per day PET line at ₹260 lakh. These ranges are indicative; your report works out the cost for your capacity, bottle sizes and location.

What raw materials are used to make carbonated soft drinks?

Treated water, sugar, flavour concentrate or emulsion, citric acid, a preservative such as sodium benzoate, permitted colour and food-grade carbon dioxide. In our sample report sugar is 68% of raw material cost. PET preforms, caps, labels and shrink film are counted separately as packing, and in the sample they cost more than all the raw materials together.

Which machines are needed for a soft drink manufacturing unit?

The core line has a water treatment plant with sand and carbon filters and reverse osmosis, sugar dissolving tanks with a syrup filter press, a chiller and a premix carbonator. A monoblock rinses, fills and caps the PET bottles. You also need a CO2 storage tank, labelling and coding machines, a shrink wrapper, a CIP cleaning system and a small quality lab.

What licences are required for soft drink manufacturing?

You need Udyam and GST registration, an FSSAI manufacturing licence, consent to establish and operate from the State Pollution Control Board, and a factory licence where thresholds apply. IS 2346 is the BIS standard for carbonated beverages. Brand owners using plastic bottles register on the CPCB EPR portal unless they are micro or small enterprises.

What is the GST rate on carbonated soft drinks?

Since 22 September 2025, aerated waters with added sugar or flavour under HSN 2202 10, and carbonated fruit drinks, attract 40% GST, up from 28%. Plain aerated water without sugar or flavour under heading 2201 is at 5%. The higher rate matters for pricing, because the distributor and retailer price your drink with the tax included.

Is a carbonated soft drink business profitable?

It can be, if the unit runs well above break-even in the summer peak. In our illustrative sample, an 11,000 litres per day unit earns a 14% return on investment in Year 3. It breaks even at 49% of capacity and pays back in about 4.5 years. Profit depends mostly on sugar and PET prices, distributor margins and how full the plant runs outside summer.

Cold drink ka business kaise shuru kare?

Start by choosing your bottle sizes and the area you can supply, then get a project report that fixes capacity, machinery and cost. Next apply for Udyam, FSSAI and pollution board consent, arrange a term loan or PMEGP for a small unit, and sign up distributors before the summer season. PMEGP covers manufacturing projects up to ₹50 lakh.

Is the sample report free and can I use it for a loan?

The sample is free to view and download. It is an illustrative carbonated soft drink project report PDF that shows the format and depth of an NPCS report; its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and scheme.

Sources and references

  1. Recommendations of the 56th meeting of the GST Council (press release, 3 September 2025)Press Information Bureau, Ministry of Finance, checked Oct 2026
  2. IS 2346:1992 Carbonated beverages, specificationBureau of Indian Standards, checked Oct 2026
  3. Gazette notification amending standards for non-alcoholic beverages (2017)Food Safety and Standards Authority of India, checked Oct 2026
  4. Categorisation of industrial sectors under Orange categoryState Pollution Control Board, Odisha, checked Oct 2026
  5. Handbook on EPR for plastic packagingTamil Nadu Pollution Control Board, checked Oct 2026
  6. Prime Minister's Employment Generation Programme (PMEGP) scheme noteMSME Department, Government of Uttar Pradesh, checked Oct 2026
Ajay Kumar Gupta, founder of NPCS

Who prepares NPCS reports

The NPCS project team, led by Ajay Kumar Gupta

This page and its sample report are prepared and reviewed by the NPCS project team, which has written techno-economic feasibility studies and detailed project reports since 1994.

Ajay Kumar Gupta founded Niir Project Consultancy Services (NPCS) and leads the organisation. With 40 years of experience in MSME project consulting, he has built the team that has delivered more than 28,000 project reports for clients worldwide, helping entrepreneurs plan and finance profitable manufacturing businesses.

Ajay Kumar Gupta on LinkedIn

Published
Last updated
Next review
Oct 2027
Reviewed by
NPCS project team

This page is reviewed every 12 months, or sooner when scheme limits, GST rates, BIS rules or pollution categories change. The sample report is illustrative: its figures are generated from industry-typical ratios for a unit of this size, checked so every statement balances, and are not taken from any client project.

Planning a different beverages project?

These are a few of the projects we advise on. NPCS's published client list records 13 beverages assignments, so tell us what you are planning.

Tell us your project
  • Packaged Drinking Water
  • Flavoured Drinking Water
  • Lemon Lime Flavoured Soft Drink Nimbu Pani
  • Beverage
  • Carbonated Non Carbonated Drinks Non Alcoholic
  • Drinking Glasses Juice Water Glasses Glassware
  • Drinking Water with Packaging in Aluminium Beverage Cans Mineral Carbonated Alkaline
  • Ice Making
  • Lychee Juice
  • Mineral Water

Recent beverages assignments

  • MG Creations
    Technical and Financial Feasibility Report on Paper Bottles for BeveragesBhopal, 2026
  • Vita Neer Industries Llp
    Techno-Economic Project Study on Packaged Drinking Water with PET BottleHanumangarh, 2026
  • Industries and Building Services Design Engineering Ltd
    Detailed Project Report on The production and market viability of carbonated soft drinksNigeria, 2024
  • SPA EmballageCanetteAluminium
    Aluminium Cans for Beverages Project Investment ReportAlgeria, 2022
  • Sri Datta Electronics
    Technical and Financial Feasibility Report on Packaged Drinking Water with PET BottleChaitanyapuri, 2021
  • The Ropar District Cooperative Milk Producers
    Industrial Project Report on Packaged Drinking WaterMohali, 2013
  • Smash Engineering PLC
    Comprehensive Project Report on Packaged Drinking WaterEthiopa, 2013
  • SNEPCo Freeman House
    Detailed Feasibility Study on Flavoured Drinking WaterNigeria, 2013

Get a carbonated soft drink project report for your plant

Tell us your planned capacity, location and loan scheme. Our team will confirm the scope and price of a report built on current machinery quotations and raw material prices for your region.

Reports are prepared in the format banks and PMEGP offices ask for, with five-year projections, DSCR and break-even.

Request a Carbonated Soft Drink Project Report

Share your plan and our team will call you back within 24 hours.

Start with the sample, then plan your own unit

Open the free carbonated soft drink sample report to see the format, then talk to NPCS about a report for your capacity and location.

Sample PDF WhatsApp
Carbonated Soft Drink sample project report (illustrative) Download New tab

Illustrative sample. Figures are representative and not from a real project.

Call Us WhatsApp