What is a chewing gum project report?
A chewing gum project report is a detailed project report (DPR) for a unit that kneads bought-in gum base with sugar, glucose and flavour, then rolls, cuts, coats and wraps it. It sets out the process, machinery, raw materials, licences, project cost, means of finance, five-year projections, DSCR and break-even a lender needs.
Confectionery makers use it to size the plant and raise a term loan or PMEGP finance; banks use it to judge whether the unit can repay.
Also known as: chewing gum business plan, bubble gum project report, DPR for chewing gum manufacturing, chewing gum manufacturing plant project report.
What a bank checks in a chewing gum project report
A credit officer reads a project report on chewing gum for a few numbers that show whether the margin is real. These are the values in our sample report and why each one gets questioned.
Gum base is priced far above sugar, so a recipe with more base pushes this up quickly. Banks compare it with the recipe and current base quotations.
Base is a minority of the weight but nearly half the cost. Test a price rise in the base before you test anything else.
Every pellet or stick is wrapped, then packed in jars or boxes. Wrapper film and cartons cost more here than in most food products.
The debt service coverage ratio shows how many times cash earnings cover loan instalments. Lenders generally want the average comfortably above 1.25.
Values are the assumptions in our illustrative sample. Your report uses figures for your recipe, suppliers and market.
Chewing gum manufacturing plant cost in India
Cost rises with daily output and with how much of the line is automatic, especially wrapping. The right-hand tier is the unit in our sample report; the other two are indicative ranges.
Small unit
₹35–70 lakh
About 100–250 kg per day, bubble gum or pellets
- Machinery₹20–40 lakh
- Shed fit-out and air conditioning (rented)₹8–18 lakh
- Working capital margin₹3–8 lakh
Can fit PMEGP, subject to the ₹50 lakh limit
Mid-size unit
₹90–150 lakh
About 300–500 kg per day
- Machinery₹45–75 lakh
- Land and building₹30–55 lakh
- Working capital margin₹4–8 lakh
MSME term loan, often with CGTMSE cover
Sample unit
₹173.24 lakh
660 kg per day, 1,98,000 kg per year
- Plant and machinery₹84.97 lakh
- Land and building₹62.45 lakh
- Working capital margin₹5.48 lakh
Term loan ₹129.93 lakh (75%), promoter ₹43.31 lakh
Small and mid-size ranges are indicative. Costs vary with location, machine make and whether the wrapping line is imported.
Chewing gum plant economics in our sample
The sample report models a 660 kg per day unit working 300 days a year. It starts at 60% capacity and reaches 80% in Year 5, selling at ₹265 per kg ex-factory before GST.
| Land and site development | 16.79 |
|---|---|
| Building and civil works | 45.66 |
| Plant and machinery | 84.97 |
| Other fixed assets | 9.72 |
| Contingencies | 6.53 |
| Preliminary and pre-operative | 4.09 |
| Working capital margin | 5.48 |
| Total | 173.24 |
| Promoter's contribution (25%) | 43.31 |
|---|---|
| Term loan from bank (75%) | 129.93 |
| Cash credit limit (separate) | 16.43 |
| Total project cost | 173.24 |
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.
Chewing gum manufacturing process, step by step
Small and mid-size units in India buy ready gum base from specialist makers and do not produce it. The work on site is mixing, forming, conditioning and wrapping, and temperature and humidity control decide quality at every stage.
- Softening the gum base
Base pellets or slabs are warmed in a jacketed kettle until soft enough to blend evenly.
- Mixing in a sigma mixer
Twin Z-shaped blades knead the base with fine sugar, liquid glucose, flavour and softeners, keeping the mass below about 55°C.
- Extrusion
The warm mass is pushed out as a flat sheet for sticks and pellets, or as a rope for bubble gum chunks and centre-filled pieces.
- Rolling and scoring
Pairs of rollers thin the sheet in stages, a light dusting stops it sticking, and the last rollers score it to stick or pellet size.
- Cooling and conditioning
Sheets pass through a chilled tunnel, then rest in a dry, air-conditioned room until firm enough to break cleanly.
- Coating pellets
Pellets tumble in coating pans while sugar or polyol syrup is added in layers to build a hard, glossy shell.
- Wrapping and packing
Cut and wrap machines wrap each piece; pieces are then filled into jars, display boxes or pouches with batch and date coding.
Raw materials for chewing gum, and what gum base costs you
Sugar and glucose make up most of each piece by weight, but gum base dominates the bill. The FSSAI standard requires at least 12.5% gum by weight in chewing gum and 14% in bubble gum, so you cannot cut the base below that to save money.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Gum base | 45% | 79.49 |
| Powdered sugar | 24% | 42.40 |
| Liquid glucose | 12% | 21.20 |
| Flavours and colours | 10% | 17.66 |
| Softeners and glycerine | 5% | 8.83 |
| Coating and dusting agents | 4% | 7.07 |
| Total | 100% | 176.65 |
Sugar-free gum swaps sugar for polyols such as sorbitol or xylitol, which raises raw material cost. Packing material is costed separately.
Chewing gum making machines and their cost
The double sigma mixer and the cut and wrap machine are the two costliest items in the sample, at ₹15.29 lakh each. Wrapping speed usually sets the real output of a small line.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Jacketed gum base melting kettle | Softens the base before mixing | 4.25 |
| Double sigma mixer | Kneads base, sugar, glucose and flavour | 15.29 |
| Gum extruder with pre-extruder | Forms a sheet or rope | 12.75 |
| Rolling and scoring machine | Thins and marks the sheet to size | 14.44 |
| Cooling tunnel | Chills the sheet so it can be handled | 8.50 |
| Conditioning room with dehumidifiers | Firms the sheets at low humidity | 5.95 |
| Coating pans | Builds the hard shell on pellets | 5.10 |
| Cut and wrap packing machine | Cuts and wraps each piece | 15.29 |
| Sugar pulveriser | Grinds sugar to a fine powder | 3.40 |
| Total plant and machinery | 84.97 | |
Costs are the sample report's estimates for a 660 kg per day line. Get current quotations before you finalise.
Who buys chewing gum, and where a new unit can compete
Chewing gum is an impulse buy, sold a piece or two at a time at kirana counters, pan shops, chemists and supermarket checkouts. A few large brands own stick and pellet gum, so a new unit rarely wins by copying them. It does better with bubble gum, centre-filled or regional flavours, and supply to brand owners.
- Confectionery distributors and wholesalers
- Kirana stores and pan shops
- Supermarkets and modern retail
- Brand owners buying under contract manufacturing
- Hotels, restaurants and caterers (after-meal gum)
- Buyers in neighbouring export markets
Where a new unit wins: gum softens and sweats in hot, humid weather. A regional unit with fresh stock and quick distributor turnover can beat older stock shipped from far away.
FSSAI licence and approvals for chewing gum manufacturing
Chewing gum is a regulated food with its own FSSAI product standard. These are the approvals most units need, as of October 2026.
| Food licence | FSSAI manufacturing licence through the FoSCoS portal; state or central licence depending on production capacity and turnover |
|---|---|
| Product standard | FSSAI standard 2.7.3 for chewing gum and bubble gum: gum at least 12.5% (14% for bubble gum), moisture at most 3.5%, sucrose at most 70% (60% for bubble gum) |
| Labelling | Artificial sweeteners, if used, must be declared on the label |
| GST and HSN | Heading 1704, sugar confectionery, at 5% GST under Notification 9/2025, in force from 22 September 2025 |
| Packaged goods | Legal Metrology registration as a packer, with net quantity and price declared on every pack |
| Business and pollution | Udyam and GST registration, and consent to establish and operate from the State Pollution Control Board |
Mistakes that weaken a chewing gum business plan
- Pricing from the shop shelf
A piece that sells for a rupee or two leaves the factory at far less after distributor and retailer margins. Revenue must use ex-factory prices.
- Treating wrappers as a small cost
Every piece is wrapped individually. Leaving out wrapper film, jars and display boxes makes profit look higher than it will be.
- No budget for humidity control
Without a cooling tunnel, dehumidified conditioning room and air conditioning, gum sticks to rollers and wrappers. Their power cost belongs in the projections.
- A recipe that fails the FSSAI standard
Cutting gum base below the minimum to save cost, or sugar above the limit, means the product cannot be sold as chewing gum.
- Relying on one gum base supplier
Base comes from a small number of specialist makers. Keep a second approved source and some stock, and test base price swings in the report.
How NPCS helps you set up a chewing gum unit
- Product and capacityChoose between pellet, stick, bubble and centre-filled gum, and size daily output to your market.
- Recipe cost and suppliersWork out raw material cost at the FSSAI gum minimum, with gum base and wrapper suppliers.
- Bank-ready project reportProjections, DSCR and working capital in the format your lender or PMEGP office wants.
- Layout and approvalsPlant layout with a conditioning room, power load and the FSSAI and state approvals list.
NPCS's client list includes 15 assignments in bakery and confectionery. The NPCS project team, led by founder Ajay Kumar Gupta, has prepared reports for food units since 1994.
What's inside the chewing gum sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
19 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS chewing gum project reports
These are chewing gum project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Chewing Gum & Bubble Gum | 400 Kgs./Day | ₹41 lakh | 47% | 51.2% | Get this report |
| Chewing GUM | 750 MT/Annum | ₹2.28 crore | 47% | 42% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Chewing Gum project report: frequently asked questions
How much does it cost to start a chewing gum manufacturing unit?
A small unit making 100–250 kg a day needs roughly ₹35–70 lakh in a rented shed, and a 300–500 kg per day unit about ₹90–150 lakh. Our sample report models a 660 kg per day unit at ₹173.24 lakh, including land, building and working capital margin. These are indicative figures; your own report costs the plant for your capacity and location.
What raw materials are used to make chewing gum?
Gum base is the main input, mixed with powdered sugar, liquid glucose, softeners such as glycerine, flavours and colours. In our sample report gum base is 45% of raw material cost even though sugar makes up most of the weight. Sugar-free gum replaces sugar with polyols and permitted sweeteners, which must be declared on the label.
Which machines are needed for chewing gum manufacturing?
A jacketed kettle to soften gum base, a double sigma mixer, an extruder, a rolling and scoring machine, a cooling tunnel and a dry conditioning room. Pellet gum also needs coating pans, and most units wrap each piece on a cut and wrap machine. A sugar pulveriser makes the fine sugar the mix needs.
Is chewing gum manufacturing profitable?
In our illustrative sample, a 660 kg per day unit earns a net profit of ₹38 lakh on sales of ₹367 lakh in Year 3. It shows a 22% return on investment and break-even at 41% of capacity. Real profit depends on gum base prices, wrapper cost, distributor margins and how much of the capacity you can actually sell.
What licence do I need to make chewing gum in India?
You need an FSSAI manufacturing licence, and the product must meet the FSSAI standard for chewing gum and bubble gum, which sets minimum gum content, moisture and sugar limits. Add Udyam and GST registration, pollution board consent and Legal Metrology registration for packaged goods. Chewing gum falls under HSN heading 1704, taxed at 5% GST as of October 2026.
Can I get a PMEGP loan for a chewing gum unit?
Yes, if the project fits the scheme. PMEGP covers new manufacturing projects up to ₹50 lakh, with a margin-money subsidy of 15–35% depending on category and location. A small pellet or bubble gum unit can fit within that limit; a larger plant usually takes an MSME term loan. Confirm current terms with your bank.
Is the sample chewing gum project report PDF free, and can I use it for a loan?
The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report. Its figures are representative and not based on a real project, so do not submit it to a bank. For a loan, NPCS prepares a report for your own capacity, location and loan scheme.
Sources and references
- Food Safety and Standards (Food Products Standards) Regulations, Chapter 2.7: Sweets and confectioneryFood Safety and Standards Authority of India, checked Oct 2026
- Notification No. 9/2025-Integrated Tax (Rate)Central Board of Indirect Taxes and Customs, checked Oct 2026
- FSSAI registration and licensing (PMFME training material)NIFTEM, Ministry of Food Processing Industries, checked Oct 2026
- Prime Minister's Employment Generation Programme (PMEGP) guideDistrict Industries Centre, Ganjam, Government of Odisha, checked Oct 2026
