What is a cement roofing tiles project report?
A cement roofing tiles project report is a detailed project report (DPR) for a unit that presses cement and sand mortar into profiled, coloured roof tiles and fittings. It sets out the process, machinery, raw materials, market, project cost, means of finance, five-year projections, DSCR and break-even that a lender needs.
Entrepreneurs use it to size the plant and apply for a term loan or PMEGP; lenders use it to judge whether the unit can repay.
Also known as: concrete roof tiles project report, concrete roofing tiles plant report, cement roofing tiles business plan, DPR for concrete roof tiles.
What a bank checks in a cement roofing tiles project report
A credit officer reads a project report on cement roofing tiles for four numbers that show whether the plant can repay. These are the values in our sample report and why each one gets attention.
Cement, sand, pigment and coating together. A report that shows a much lower share is usually pricing cement below the market or ignoring rejected tiles.
Cement prices move with the season and the region. The report should test a rise in cement price, because it hits margin more than any other input.
Tiles sit in the yard to cure before they can be sold. This stock ties up cash, so it must appear in the working capital calculation.
Debt service coverage ratio is the cash available for loan repayment divided by the instalments due. Lenders look at the weakest year, not only the average of 1.53.
Values are the assumptions in our illustrative sample. Your report uses figures for your capacity, suppliers and market.
How much does a cement roofing tiles unit cost?
The biggest decision is the forming method: a tile press with hand-fed moulds, or a continuous extrusion line on pallets. The large tier is the plant in our sample report; the smaller tiers are indicative ranges.
Small unit
₹25–60 lakh
About 1,000–2,500 tiles per day, hydraulic press or vibrated moulds
- Machinery and moulds₹10–25 lakh
- Shed and curing yard (or rent)₹8–20 lakh
- Working capital margin₹4–10 lakh
Fits PMEGP, subject to limits
Mid-size unit
₹1.5–3 crore
About 3,000–6,000 tiles per day, semi-automatic extrusion
- Machinery and pallets₹0.7–1.4 crore
- Land and building₹0.5–1.2 crore
- Working capital margin₹8–15 lakh
MSME term loan, often with CGTMSE cover
Large unit
₹396.81 lakh
9,800 tiles per day, 32,34,000 tiles per year
- Plant and machinery₹186.89 lakh
- Building and civil works₹103.67 lakh
- Working capital margin₹16.19 lakh
Term loan ₹297.61 lakh (75%), promoter ₹99.20 lakh
Small and mid-size ranges are indicative and exclude land unless stated. Costs vary with location, automation and machine make.
Cement roofing tiles manufacturing process
Tile quality is decided in two places: how dry the mortar is when it is formed, and how well the tile is kept moist while it gains strength. The sample plant follows seven steps.
- Batching
Cement, graded sand, pigment and water are weighed for every batch. Weighing, not measuring by volume, keeps colour and strength the same from one day to the next.
- Mixing
A pan mixer turns the batch into a stiff mortar with little water. Too wet and the tile sags off its profile; too dry and the surface tears.
- Extrusion
A roller and a shaped slipper press the mortar onto aluminium pallets moving under the machine, forming a continuous ribbon with the tile profile and interlocks.
- Cutting and colouring
A knife cuts the ribbon into single tiles. A colour slurry or acrylic coat is then sprayed on the wet surface so it bonds well.
- Chamber curing
Pallets are racked in a closed, humid curing chamber overnight. The tiles gain enough early strength to be lifted off without cracking.
- Depalleting and yard curing
Tiles are taken off the pallets, stacked and kept moist in the yard while they gain full strength. The empty pallets go back to the machine.
- Testing and dispatch
Sample tiles from each day's output are checked for breaking load and water absorption, then strapped on wooden pallets for dispatch with ridge and verge fittings.
Raw materials for cement roofing tiles
Cement is more than half of the raw material bill, with sand and pigments next at 15% and 14%. Units close to cement plants and a clean sand source have a lasting cost advantage, and most buy pigment in bulk to keep shades consistent across batches.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Ordinary Portland cement | 55% | 140.71 |
| Graded river sand or crushed stone sand | 15% | 38.37 |
| Iron oxide pigments | 14% | 35.82 |
| Acrylic surface coating | 12% | 30.70 |
| Plasticiser and admixtures | 4% | 10.23 |
| Total | 100% | 255.83 |
Cement roof tile making machine and other equipment
The extrusion machine is the costliest item, but the aluminium pallets come second. Every tile needs its own pallet until it leaves the curing chamber, so pallet count sets real daily output.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Roller and slipper roof tile extrusion machine | Forms the tile ribbon on moving pallets | 56.07 |
| Aluminium tile pallets | Carry and shape each tile until it is cured | 33.64 |
| Pan mixer with weigh batching system | Weighs and mixes each batch of mortar | 22.43 |
| Curing chamber with racks and humidification | Holds racked pallets in moist air overnight | 22.43 |
| Pallet stacker, destacker and conveyors | Moves pallets to and from the chamber | 18.69 |
| Colour slurry and acrylic spray system | Applies the surface colour and sealer | 14.95 |
| Forklift for pallet and tile handling | Shifts racks and dispatch stacks | 11.21 |
| Tile breaking load and absorption test rig | Daily quality checks on sample tiles | 7.47 |
| Total plant and machinery | 186.89 | |
Costs are the sample report's estimates for a 9,800 tiles per day line. Get current quotations before you finalise.
Who buys cement roofing tiles in India?
Demand comes from homes and villas with sloped roofs, mainly in high-rainfall and hill regions. Owners also lay a sloping tiled cover over a flat RCC slab to cut heat and seepage. Resorts and farmhouses use coloured tiles for their look.
Concrete tiles are heavy and chip in transit, so most units sell within a few hundred kilometres of the plant. Buyers order the number of tiles a roof needs, and every roof also needs ridge, hip and verge fittings in the same shade.
- Building-material and roofing dealers
- Roofing and civil contractors
- Builders of villas and gated housing
- Architects specifying sloped roofs
- Resort and institutional builders
Where a new unit wins: contractors return to a supplier who can deliver the same shade months later for an extension, along with every fitting the roof needs. Colour control and a complete fittings range matter as much as price.
Licences and standards for a cement roofing tiles unit
The approvals list is short, but two points are specific to this product: the pollution category depends on how you cure, and there is no Indian Standard written for concrete roof tiles.
| Business registration | Udyam (MSME) registration and GST registration |
|---|---|
| Pollution board consent | Consent to establish and operate from the State Pollution Control Board. The CPCB 2020 list puts cement products such as blocks and tiles made without asbestos, boiler or steam curing in the Green category; a steam-cured plant should confirm its category with the board |
| Product standard | As of October 2026 we found no BIS standard for concrete roof tiles; IS 654:2023 covers clay Mangalore tiles only. Many buyers and exporters use EN 490 for tile strength, size and water impermeability |
| Quality Control Order | The fibre cement products order of 2023 covers roofing sheets, not tiles. We found no order covering concrete roof tiles as of October 2026; check with BIS before launch |
| GST | Cement roofing tiles are usually classed as articles of cement or concrete (HSN 6810). Clay roofing tiles (HSN 6905) are a separate entry, taxed at 12% from 22 September 2025. Confirm your rate with your CA |
| Factory licence and power | Factory licence where worker and power thresholds apply, and an industrial power connection for the mixer, extruder and curing chamber load |
Loans and schemes for a cement roofing tiles project
The right route depends on the forming method you choose. A press-and-mould unit can fit PMEGP; an extrusion plant usually needs a bank term loan.
PMEGP
Manufacturing projects up to ₹50 lakhMargin-money subsidy of 15–35% for a new unit, with own contribution of 5–10%. Suits a small press-based tile unit.
MSME term loan with CGTMSE
Guarantee cover up to ₹10 croreCollateral-free credit for eligible micro and small enterprises. The usual route for a mid-size or large extrusion plant.
Cash credit limit
Working capital, set by stock and debtor daysFunds cement stock, curing yard stock and dealer credit. Our sample report needs a ₹48.58 lakh limit alongside the term loan.
Scheme limits change. Confirm current terms with the bank or the scheme portal before applying.
Mistakes that weaken a cement roofing tiles project report
- No allowance for breakage
Tiles crack at depalleting, stacking and unloading. Sales must be based on saleable tiles, not the extruder's rated output.
- Too few pallets for the curing cycle
If pallets run out before the chamber releases the last batch, the extruder stops. The report should size pallets to a full day's output plus spares.
- Leaving out fittings
Ridge, hip and verge pieces need their own moulds, sell at a different price and slow the line. Ignoring them misstates both revenue and capacity.
- Forgetting yard stock in working capital
Tiles waiting to cure are money held in the yard. Without these finished goods days, the cash credit limit comes out too small.
- Pricing tiles at retail rates
Dealers buy ex-factory and add freight and margin. Using the rate a homeowner pays inflates sales and DSCR.
How NPCS helps you set up a cement roofing tiles unit
- Forming method and capacityCompare press and extrusion routes for your budget and target daily output.
- Machinery and pallet sizingMatch the extruder, curing chamber and pallet count, and collect quotations.
- Bank-ready project reportProjections, DSCR, breakage and yard stock in the format your lender wants.
- Approvals and layoutPlant and curing yard layout, power load and the approvals list for your state.
NPCS's client list includes 23 assignments in building materials. The NPCS project team, led by founder Ajay Kumar Gupta, has prepared project reports for entrepreneurs, banks and companies since 1994.
What's inside the cement roofing tiles sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
18 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS cement roofing tiles project reports
These are cement roofing tiles project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Cement Roofing Tiles | 5000 Nos. /Day | ₹1.63 crore | 43% | 43% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Cement Roofing Tiles project report: frequently asked questions
What is the cement roofing tiles manufacturing plant cost in India?
A small unit with a tile press and hand-fed moulds needs roughly ₹25–60 lakh, and a semi-automatic extrusion line about ₹1.5–3 crore. Our sample report models a 9,800 tiles per day plant at ₹396.81 lakh, including land, building and working capital margin. These ranges are indicative; your project report works out the cost for your capacity and site.
What raw materials are used to make cement roofing tiles?
Ordinary Portland cement, graded river sand or crushed stone sand, iron oxide pigments, an acrylic surface coat and a small dose of plasticiser. In our sample report cement is 55% of raw material cost and pigments 14%. Sand must be clean and well graded, because silt and oversize grit weaken the tile and spoil the surface finish.
Which machine is used for cement roof tile making?
Larger units use a roller and slipper extrusion machine that forms tiles on aluminium pallets, with a pan mixer, a curing chamber, a pallet stacker and a colour spray line. In our sample report the extrusion machine is the costliest item at ₹56.07 lakh of ₹186.89 lakh. Small units start with a hydraulic tile press or vibrated moulds.
Is cement roofing tile manufacturing profitable?
In our illustrative sample, a 9,800 tiles per day unit earns a 16% return on investment in Year 3. It breaks even at about 42% of capacity and pays back in about 4.2 years. Actual profit depends on cement buying, breakage, how many fittings you sell with each roof, and how quickly dealers pay.
Concrete roof tiles or clay Mangalore tiles: which is better?
Each suits a different buyer. Concrete tiles are moulded to exact size, come in many colours and usually cost less per square metre. They are heavier, and their surface colour can fade over the years. Fired clay tiles hold colour longer. Clay Mangalore tiles have their own BIS standard, IS 654:2023.
Can I get a PMEGP loan for a cement roofing tiles unit?
Yes, if the project fits the scheme. PMEGP covers new manufacturing projects up to ₹50 lakh, with a margin-money subsidy of 15–35% depending on category and location. A full extrusion plant costs more, so it usually takes an MSME term loan, often with CGTMSE guarantee cover. Each route needs a project report with projections and DSCR.
Is the cement roofing tiles project report PDF free, and can I use it for a loan?
The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report. Its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and loan scheme.
Sources and references
- Prime Minister's Employment Generation Programme (PMEGP) guideDistrict Industries Centre, Ganjam, Government of Odisha, checked Oct 2026
- Credit Guarantee Fund Trust for Micro and Small EnterprisesCGTMSE, checked Oct 2026
- CPCB revised Green category of industries list, 2020Puducherry Pollution Control Committee (CPCB list), checked Oct 2026
- IS 654:2023 Clay roofing tiles, Mangalore pattern: specificationBureau of Indian Standards, checked Oct 2026
- BS EN 490:2011+A1:2017 Concrete roofing tiles and fittings: product specificationsBritish Standards Institution, checked Oct 2026
- Asbestos or Fibre Cement based Products (Quality Control) Order, 2023, draft notified to WTODepartment for Promotion of Industry and Internal Trade, via WTO TBT, checked Oct 2026
- Notification 1635-F.T. on GST for bricks and earthen or roofing tiles (with Central notification 14/2025)Finance Department, Government of West Bengal, checked Oct 2026
